* These are only needed in case we want to
advertise interfaces with different version
than the HAL definition itself (see DRM).
Change-Id: I3a5c367730ef79ed6260b2d7142bb6ca9eaa4a92
Haptics devices which registers as input FF devices are not supposed to
be detected by input subsystem. Add excluded-input-devices.xml file for
input subsystem to exclude them.
Change-Id: I52dc6e502b29e2813299d073195a0991bb2cf692
* The following things are left in devices, because they're device specific
- voip compress properties
- HVDCP properties
- audio configs
- power profile
- rounded corner configuration
- partition configuration
- FOD
- camera motor
- NFC
- board-info
- fstab
- ipa and graphics firmware
- shipping and manifest target level
Co-authored-by: Adithya R <gh0strider.2k18.reborn@gmail.com>
Co-authored-by: Arian <arian.kulmer@web.de>
Change-Id: I8bef29041f8f239361b999fc8ab1a43cc2ebb86b
This addresses the runtime VINTF parse error:
E hwservicemanager: getDeviceHalManifest: -2147483648 VINTF parse error: Cannot add manifest fragment /vendor/etc/vintf/manifest/android.hardware.biometrics.fingerprint@2.1-service.xml:HAL "android.hardware.biometrics.fingerprint" has a conflict.
Change-Id: I478c314b46bc6e39206f268d52fc7e445a2df3e4
Remove gEnableTDLSSupport and gEnableTDLSImplicitTrigger
from ini file
Enable this ini from driver header file
Change-Id: I6e4337615e75b5f5288bdf4e50a94f2c7ec3e0d6
CRs-Fixed: 2775227
Ini config values TxPower2g and TxPower5g are not
getting used anymore.
Remove TxPower2g and TxPower5g from WCNSS_qcom_cfg.ini
for all the targets.
Change-Id: Id85bec3e4ae3bb8012e13844bb0afa682a593fee
CRs-Fixed: 2607679
Currently, with drop_bcn_on_chan_mismatch disable
default value of drop_bcn_on_chan_mismatch is overwritten
and abnormal rssi is observed for some beacons.
To avoid the issue remove drop_bcn_on_chan_mismatch
from ini, So that default value of drop_bcn_on_chan_mismatch
can be used.
Change-Id: I6e7ec9327a2e13d1fed73bec2fedf8b584989930
CRs-Fixed: 2588983
Currently with the ini enabled, there is a issue where the random mac
address assiged to the interface is duplicated by the framework.
To avoid this, the ini gEnableConcurrentSTA is disabled.
Change-Id: I3254e2274f16c1a9af290ed50eb03c98ced23593
CRs-Fixed: 2520726
Enable driver param "no_rrm=1" in wpa_supplicant_overlay.conf
for all targets. Since location modules need the registration
of rrm frames, it is disabled in wpa_supplicant for all targets
CRs-Fixed: 2693388
Change-Id: I13fb4aabe4edb25d3d0cda30a16e69d6fbf35334
With this patch nfc interface info in wps information element is
disabled and only certified config methods are enabled.
Change-Id: Iea297426ddc078172f5c71575656c65bcada9d5f
CRs-Fixed: 2680762
Add AID_VENDOR_FASTRPC group, so that fastrpc clients can be in
this group to get extra privileges on the remote subsystem, like
higher thread priority.
Change-Id: Icb8e418cfe66d696cad9d608d30f4b3f2a02bef8
Remove all vendor.qti.gnss and android.hardware.gnss
entries in manifest.xml, since these manifest fragments
are moved to gps git projects.
Change-Id: Ieb3b0b4244ff075ba254d2e3ad1209c92fd3a4d6
CRs-fixed: 2548467
Add manifest entry for the dsp HAL interface and service for
steppe.
Change-Id: I8b6ebbe87ad5d64e700c239c6e15fede86184e93
Acked-by: Thyagarajan Venkatanarayanan <venkatan@qti.qualcomm.com>
This has now moved to a standalone VINTF fragment in
platform/hardware/interfaces:2d7820a6ef2df58f2417f2ea7bfefe01c763e807
Bug: 154366158
Change-Id: I1bd54b6b85e44f3a9b00320940cc42769ffe0304
android.hardware.thermal@1.0::IThermal/default is deprecated in compatibility matrix at FCM Version 4; it should not be served.
Change-Id: Icc3c672a0bf6b9e4ee76ccf91e6cdca5fb778fde
Runtime Resource Overlays (RROs) can no longer change the value of
resources in manifest when read during PackagerParser.
This change uses component-override to enable the service by default
on this device.
Remove usages of profile_supported_sap from overlays as they no
longer configure the enable state of .sap.SapService.
Bug: 135048762
Test: adb shell pm query-services \
com.android.bluetooth/.sap.SapService
Change-Id: I284d254a921b14d1533745611a083f4b5a27d9dc
This CL removes the definition for the hostapd hidl interface from
manifest.xml and rely on vint-fragements entry.
This is to avoid the need to modify the revision in future
Bug: 145780363
Test: builds and wifi softap works
Change-Id: I2a9cb25209efc94f6306f38d89cb5e1ff6f72bed
This CL removes the definition for the IWifi hidl interface from
manifest.xml and rely on vint-fragements entry.
This is to avoid the need to modify the revision in future
Bug: 138243400
Test: builds and wifi works
Change-Id: Icaff93193e10d4953d9947d2739b05959ece79f1
* Xiaomi is using the earpiece echo reference paths in their HAL,
while CAF uses handset paths.
* Rename the earpiece mixer paths to handset mixer paths in order
to apply the correct echo reference for the CAF hal.
Change-Id: Id917fb33f49009e8145c58638e9fa6d05670473e
* Xiaomi's audio HAL uses the "echo-reference-voip speaker" path during voip
calls in speaker mode, while the CAF hal uses the "echo-reference-voip" path.
* That led to an echo in voip speaker calls since xiaomi appends speaker
to the path name and hence the echo reference wasn't set up properly, because
xiaomi did not apply their echo-reference edits to the default path.
* To fix this we can apply xiaomi's "echo-reference speaker" and
"echo-reference-voip speaker" as "echo-reference" and "echo-reference-voip".
* Remove the "echo-reference speaker" and "echo-reference-voip speaker" paths
because they are the same as "echo-reference" and "echo-reference-voip" and
even if the HAL will support speaker paths one day, it would not be needed for
us since we don't need to differ between speaker and no suffix.
Change-Id: I9c2d42db6870c7f3579f5d96756a8bd4063022c8
* Initially based on the list defined by Xiaomi, trimmed to include
only the vendor libs that are also being shipped by us.
Change-Id: I552dc44a32221d2d3cec48e1c64ed72c470d412e
* Setup davinci sku when device is global or chinese.
* Move the nfc manifest entry to davinci hardware sku
variant.
Change-Id: I76ac75cd80f85efa6dfa68753602d934a11000a3
Signed-off-by: Arian <arian.kulmer@web.de>
* libshoebox.so does not exist anymore
* HW_ACCELERATED has been disabled by default as stated in the HAL
E EffectsFactoryConfigLoader: Could not find library in effect directories: libshoebox.so
E EffectsFactoryConfigLoader: Error querying effect 7d1580bd-297f-4683-9239-e475b6d1d69f on lib offload_bundle
E EffectsFactoryConfigLoader: Could not find library shoebox to load effect shoebox
E EffectsFactoryConfigLoader: 3 errors during loading of configuration: /vendor/etc/audio_effects.xml
Change-Id: I2407c03728930995213f16ec0551e4194fbb7476
Signed-off-by: Arian <arian.kulmer@web.de>
