From 12ef45d42e1dd3097996f705ec9c6eb576c2b2d9 Mon Sep 17 00:00:00 2001 From: Alexander Winkowski Date: Sun, 20 Aug 2023 13:43:44 +0000 Subject: [PATCH] sweet: Move NFC configs to vendor Change-Id: Id6dc9052673afd4ca6f32af154cb8c7a50ccf479 --- configs/nfc/libnfc-nci.conf | 103 ------- configs/nfc/libnfc-nxp.conf | 567 ------------------------------------ device.mk | 4 - proprietary-files.txt | 2 + 4 files changed, 2 insertions(+), 674 deletions(-) delete mode 100644 configs/nfc/libnfc-nci.conf delete mode 100644 configs/nfc/libnfc-nxp.conf diff --git a/configs/nfc/libnfc-nci.conf b/configs/nfc/libnfc-nci.conf deleted file mode 100644 index 0035dda..0000000 --- a/configs/nfc/libnfc-nci.conf +++ /dev/null @@ -1,103 +0,0 @@ -###################### Start of libnfc-common.conf ####################### - -############################################################################### -# Application options -APPL_TRACE_LEVEL=0xFF -PROTOCOL_TRACE_LEVEL=0xFFFFFFFF - -NFC_DEBUG_ENABLED=0x01 - -############################################################################### -# File used for NFA storage -NFA_STORAGE="/data/nfc" - -############################################################################### -# Force UICC to only listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F -UICC_LISTEN_TECH_MASK=0x07 - -############################################################################### -# Configure the default Destination Gate used by HCI (the default is 4, which -# is the ETSI loopback gate. -NFA_HCI_DEFAULT_DEST_GATE=0xF0 - -############################################################################### -# Forcing HOST to listen for a selected protocol -# 0x00 : Disable Host Listen -# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A -# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B -# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F -# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F -HOST_LISTEN_TECH_MASK=0x07 - -############################################################################### -# Enabling/Disabling Forward functionality -# Disable 0x00 -# Enable 0x01 -NXP_FWD_FUNCTIONALITY_ENABLE=0x01 - -############################################################################### -# AID for Empty Select command -# If specified, this AID will be substituted when an Empty SELECT command is -# detected. The first byte is the length of the AID. Maximum length is 16. -AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} - -############################################################################### -# When screen is turned off, specify the desired power state of the controller. -# 0: power-off-sleep state; DEFAULT -# 1: full-power state -# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) -SCREEN_OFF_POWER_STATE=1 - -############################################################################### -# Default poll duration (in ms) -# The defualt is 500ms if not set (see nfc_target.h) -#NFA_DM_DISC_DURATION_POLL=333 - -############################################################################### -# Force tag polling for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | -# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | -# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | -# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE. -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ -# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ -POLLING_TECH_MASK=0xEF - -############################################################################### -# Force P2P to only listen for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | -# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ -# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ -P2P_LISTEN_TECH_MASK=0xC5 - -PRESERVE_STORAGE=0x01 - -############################################################################### -# Deactivate notification wait time out in seconds used in ETSI Reader mode -# 0 - Infinite wait -NFA_DM_DISC_NTF_TIMEOUT=0 - -############################################################################### -# AID_MATCHING constants -# AID_MATCHING_EXACT_ONLY 0x00 -# AID_MATCHING_EXACT_OR_PREFIX 0x01 -# AID_MATCHING_PREFIX_ONLY 0x02 -AID_MATCHING_MODE=0x01 - -############################################################################### \ No newline at end of file diff --git a/configs/nfc/libnfc-nxp.conf b/configs/nfc/libnfc-nxp.conf deleted file mode 100644 index 5f14ca0..0000000 --- a/configs/nfc/libnfc-nxp.conf +++ /dev/null @@ -1,567 +0,0 @@ -#============================================================================ -# File Name: libnfc-nxp.conf -# -# Description: -# NFC configuration management file -# -# Modification History: -# Revision 1.0 2017/01/04 20:50:20 xiaohua.wang@xiaomi.com -# Initial draft version for Xiaomi C1 P2 board -# -# Revision 1.1 2017/03/01 16:32:09 xiaohua.wang@xiaomi.com -# Upgrade NFCC firmware version to 11.1.E -# -# Revision 1.2 2017/06/30 23:45:41 xiaohua.wang@xiaomi.com -# Improved notification management of received NCI Mode Set -# -# Revision 1.3 firmware version to 11.1.13/14 -# Kevin.hu@nxp.com 2017/09/05 16:06:41 -#============================================================================= - -# FW_VERSION=ALMSL 11.1.13/14 -# DEVICE_MANUFACTURER=Xiaomi -# DEVICE_MODEL=E1 - -# This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn5x) -# and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn5x) - -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -# -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/nq-nci" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn553_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 - -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_32MHZ 5 -#define CLK_FREQ_38_4MHZ 6 -#define CLK_FREQ_52MHZ 7 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 - -NXP_SYS_CLOCK_TO_CFG=0x06 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### - -############################################################################### -# Standby enable settings -NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -NXP_EXT_TVDD_CFG=0x01 - -############################################################################### -#config1:SLALM, 3.6V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, 01, 31, 00, 00, 00, 10, 00, 10, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -# monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, BA, 1E, 15, 00, D0, 0C} - -#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC, -# DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 40, 0A} - -NXP_RF_CONF_BLK_1={ - 20, 02, E7, 1B, - A0, 0D, 06, 06, 37, 08, 76, 00, 00, - A0, 0D, 03, 24, 03, 7E, - A0, 0D, 06, 02, 35, 00, 3E, 00, 00, - A0, 0D, 06, 04, 35, 2D, 02, 70, 02, - A0, 0D, 06, C2, 35, 00, 3E, 00, 03, - A0, 0D, 06, 04, 42, F8, 40, FF, FF, - A0, 0D, 04, 32, 42, F8, 40, - A0, 0D, 04, 46, 42, 68, 40, - A0, 0D, 04, 56, 42, 78, 40, - A0, 0D, 04, 5C, 42, 80, 40, - A0, 0D, 04, CA, 42, 68, 40, - A0, 0D, 06, 06, 42, 00, 02, F8, F8, - A0, 0D, 06, 32, 4A, 53, 07, 00, 1B, - A0, 0D, 06, 46, 4A, 33, 07, 00, 07, - A0, 0D, 06, 56, 4A, 43, 07, 00, 07, - A0, 0D, 06, 5C, 4A, 11, 07, 01, 07, - A0, 0D, 06, 34, 44, 66, 0A, 00, 00, - A0, 0D, 06, 48, 44, 65, 0A, 00, 00, - A0, 0D, 06, 58, 44, 55, 08, 00, 00, - A0, 0D, 06, 5E, 44, 55, 08, 00, 00, - A0, 0D, 06, CA, 44, 65, 0A, 00, 00, - A0, 0D, 06, 06, 44, 04, 04, C4, 00, - A0, 0D, 06, 34, 2D, DC, 20, 04, 00, - A0, 0D, 06, 48, 2D, 15, 34, 1F, 01, - A0, 0D, 06, 58, 2D, 0D, 48, 0C, 01, - A0, 0D, 06, 5E, 2D, 0D, 5A, 0C, 01, - A0, 0D, 06, CA, 2D, 15, 34, 1F, 01 -} - -# Enable DLMA -NXP_RF_CONF_BLK_2={ - 20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 47, 40, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 47, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00 -} - -# Disable DPC -NXP_RF_CONF_BLK_3={ - 20, 02, 5B, 01, A0, 0B, 57, 11, 11, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 1F, 00, 00, B9, 1F, 00, 00 -} - -# CE detector/phase -NXP_RF_CONF_BLK_4={ - 20, 02, 21, 04, - A0, 38, 04, 14, 0B, 0B, 00, - A0, 3A, 08, 1E, 00, 1E, 00, 1E, 00, 1E, 00, - A0, 0D, 06, 06, 16, 0E, 00, 1F, 00, - A0, B1, 02, BB, 08 -} -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x01 - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_RF_UPDATE_REQ=0x01 - -############################################################################### -# Core configuration extensions -# A009 - Time-out before standby -# A0EC - Disable/Enable SWP1 interface -# A0ED - Disable/Enable SWP2 interface -# A05E - Send RID automatically in Jewel Reader mode -# A012 - NFCEE interface 2 configuration -# A040 - Low Power Card Detector Enable -# A041 - Low Power Card Detector Threshold -# A042 - Low Power Card Detector Sampling -# A043 - Low Power Card Detector Hybrid -# A0D5 - SWP/DWP desired baudrate -# A0D8 - Configure the number of Sliding Windows used on DWP -# A0DD - Retry on SWP2 interface -# A0F2 - SVDD_PWR_REQ enable -# A09F - Add ON/OFF guard time for SVDD power management(Step value ~1mSec) -# A096 - Notify all AIDs -# A037 - SE DWP system configuration -NXP_CORE_CONF_EXTN={20, 02, 6B, 14, - A0, 09, 02, 90, 01, - A0, EC, 01, 01, - A0, ED, 01, 03, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, 41, 01, 05, - A0, 43, 01, 04, - A0, 46, 02, BA, 27, - A0, 47, 02, BA, 27, - A0, 81, 01, 01, - A0, D5, 01, 0A, - A0, D8, 01, 02, - A0, DD, 01, 2D, - A0, F2, 01, 01, - A0, 9F, 02, 08, 08, - A0, 96, 01, 01, - A0, 37, 01, 35, - A0, 3F, 01, 01, - A0, 29, 17, 19, 07, 40, 1C, 00, 02, 40, 1C, 00, 02, 00, 41, F4, F6, 00, 41, F4, F6, 38, 70, 00, 00, 00 - } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit -# NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01} -# NXP_CORE_RF_FIELD={ 2F, 32, 01, 01} -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2E, 0E, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -# NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 -#PN553 0x07 -#PN80T 0x08 -NXP_NFC_CHIP=0x07 - -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -############################################################################### -NXP_DEFAULT_NFCEE_TIMEOUT=0x06 - -############################################################################### -# Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -# Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### - -# Set the default AID route Location : -# This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 -DEFAULT_AID_ROUTE=0x02 - -############################################################################### -# Set the Mifare Desfire route Location : -# Configure the default NfcA/IsoDep techology and protocol route. Can be -# either a secure element (e.g. 0xF4) or the host (0x00) -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 -DEFAULT_ISODEP_ROUTE=0x02 - -############################################################################### -# Configure the single default SE to use. The default is to use the first -# SE that is detected by the stack. This value might be used when the phone -# supports multiple SE (e.g. 0xC0 and 0x80) but you want to force it to use -# one of them (e.g. 0xC0). -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_OFFHOST_ROUTE=0x02 - -############################################################################### -# Configure the single default SE to use. The default is to use the first -# SE that is detected by the stack. This value might be used when the phone -# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use -# one of them (e.g. 0xF4). -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 -DEFAULT_TECH_ABF_ROUTE=0x02 - -############################################################################### -#Set the default Felica T3T System Code OffHost route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -DEFAULT_SYS_CODE_ROUTE=0x02 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Off -# bit pos 4 = Screen Lock -DEFAULT_AID_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Off -# bit pos 4 = Screen Lock -DEFAULT_ISODEP_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Off -# bit pos 4 = Screen Lock -DEFAULT_OFFHOST_PWR_STATE=0x1B - -############################################################################### -#Set Tech A,B,F Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Off -# bit pos 4 = Screen Lock -DEFAULT_TECH_ABF_PWR_STATE=0x1B - -############################################################################### -#Set the SYS_CODE Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Off -# bit pos 4 = Screen Lock -DEFAULT_SYS_CODE_PWR_STATE=0x00 - -############################################################################### -# Configure the NFC Extras to open and use a static pipe. If the value is -# not set or set to 0, then the default is use a dynamic pipe based on a -# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value -# for each UICC (where F3="UICC0" and F4="UICC1") -OFF_HOST_ESE_PIPE_ID=0x19 -OFF_HOST_SIM_PIPE_ID=0x0A - -############################################################################### -# Bail out mode -# If set to 1, NFCC is using bail out mode for either Type A or Type B poll. -NFA_POLL_BAIL_OUT_MODE=0x00 - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x22 - -############################################################################### -#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 -#msec to 20000 msec and zero is to disable. -NXP_NFCC_STANDBY_TIMEOUT=20000 - -############################################################################### -#Dynamic RSSI feature enable -# Disable 0x00 -# Enable 0x01 -NXP_AGC_DEBUG_ENABLE=0x00 - -############################################################################### -#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode -# For Technology routing to ESE Technology Mask = 4 -# For ISO-DEP Protocol routing to ESE Mask = 2 -# It can also take TECH|PROTO = 6 -# To ignore the delay set mask to = 0 -NXP_ESE_WIRED_PRT_MASK=0x00 - -############################################################################### -#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode -#For Technology routing to UICC Technology Mask = 4 -#For ISO-DEP Protocol routing to UICC set Mask = 2 -#For Select AID Routing to UICC set Mask = 1 -#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay -#set mask = 0 -NXP_UICC_WIRED_PRT_MASK=0x00 - -############################################################################### -#RF field true delay Wired Mode -# delay wired mode = 1 -# allow wired mode = 0 -NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 - -############################################################################### -# UICC mode supported -# Disable 0x00 -# Enable 0x01 -NXP_DUAL_UICC_ENABLE=0x00 -############################################################################### -#Config to allow adding aids -#NFC on/off is required after this config -#1 = enabling adding aid to NFCC routing table. -#0 = disabling adding aid to NFCC routing table. -NXP_ENABLE_ADD_AID=0x01 - -############################################################################### -# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal -# JCOP CP TIMEOUT -NXP_CP_TIMEOUT={00, 77} - -############################################################################### -# Enable/Disable checking default proto SE Id -# Disable 0x00 -# Enable 0x01 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -############################################################################### -#Enable NXP NCI runtime parser library -#Enable 0x01 -#Disable 0x00 -NXP_NCI_PARSER_LIBRARY=0x00 - -############################################################################### -#This config will enable different level of Rf transaction debugs based on the -#following values provided. Decoded information will be printed in adb logcat -#Debug Mode Levels -#Disable Debug 0x00 -#L1 Debug 0x01 -#L2 Debug 0x02 -#L1 & L2 Debug 0x03 -#L1 & L2 & RSSI 0x04 -#L1 & L2 & Felica 0x05 -#NXP_CORE_PROP_SYSTEM_DEBUG=0x00 - -############################################################################### -# Enable/Disable Block Route feature. -# Block Route will restrict routing to first matched rule -# Block Route enable 0x01 -# Block Route disable 0x00 -AID_BLOCK_ROUTE=0x01 - -############################################################################### -# Enable or Disable RF_STATUS_UPDATE to EseHal module -# Disable 0x00 -# Enable 0x01 -RF_STATUS_UPDATE_ENABLE=0x00 - -############################################################################### -# Timeout value in milliseconds to send response for Felica command received -NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 -############################################################################### -# Vendor Specific Proprietary Protocol & Discovery Configuration -# Set to 0xFF if unsupported -# byte[0] NCI_PROTOCOL_18092_ACTIVE -# byte[1] NCI_PROTOCOL_B_PRIME -# byte[2] NCI_PROTOCOL_DUAL -# byte[3] NCI_PROTOCOL_15693 -# byte[4] NCI_PROTOCOL_KOVIO -# byte[5] NCI_PROTOCOL_MIFARE -# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO -# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME -# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME -NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF} - -############################################################################### -#White list of Hosts -#This values will be the Hosts(NFCEEs) in the HCI Network. -DEVICE_HOST_WHITE_LIST={02} - -############################################################################### -#OffHost UICC route location for MultiSE -#UICC1 = 02 -#UICC2 = 03 -OFFHOST_ROUTE_UICC={02} - -############################################################################### -# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1. -# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm -# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block -# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check -PRESENCE_CHECK_ALGORITHM=2 - -############################################################################### -# Extended APDU length for ISO_DEP -ISO_DEP_MAX_TRANSCEIVE=0xFEFF - -############################################################################### -# Enable/Disable mifare desfire CE prio feature -# Disable 0x00 -# Enable 0x01 -NXP_MIFARE_DESFIRE_DISABLE=0x00 diff --git a/device.mk b/device.mk index fb9e66c..34044ad 100644 --- a/device.mk +++ b/device.mk @@ -49,10 +49,6 @@ PRODUCT_PACKAGES += \ PRODUCT_PACKAGES += \ android.hardware.nfc-service.nxp -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/configs/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf \ - $(LOCAL_PATH)/configs/nfc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf - PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/sku_sweet/android.hardware.nfc.ese.xml \ frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/sku_sweet/android.hardware.nfc.hcef.xml \ diff --git a/proprietary-files.txt b/proprietary-files.txt index a4b8278..14535f3 100644 --- a/proprietary-files.txt +++ b/proprietary-files.txt @@ -333,6 +333,8 @@ vendor/firmware/a630_sqe.fw -vendor/lib64/hw/consumerir.default.so:vendor/lib64/hw/consumerir.sm6150.so # NFC +vendor/etc/libnfc-nci.conf +vendor/etc/libnfc-nxp.conf -vendor/lib/libpn553_fw.so # Sensors