# DMRLink SAMPLE CONFIGURATION FILE
#
# Rename to dmrlink.cfg and add your information
# # GLOBAL CONFIGURATION ITEMS
#   There are no global options at this time
#
[GLOBAL]
PATH: /absolute/path/to/DMRlink


# STDOUT REPORTING CONFIG
#   Enabling "REPORT_PEERS" will cause a print-out of the peers in each
#   IPSC each time the periodic reporting loop runs, that perios is
#   specifiec by "REPORT_INTERVAL" in seconds. Likewise, the
#   additional features listed will cause that list to either include
#   or not include MODE and/or SERVICE FLAG details.
#
[REPORTS]
REPORT_PEERS: 0
REPORT_INTERVAL: 60
PEER_REPORT_INC_MODE: 0
PEER_REPORT_INC_FLAGS: 0 


# SYSTEM LOGGER CONFIGURAITON
#   This allows the logger to be configured without chaning the individual
#   python logger stuff in dmrlink.py. LOG_FILE should be a complete
#   path/filename for *your* system. LOG_HANDERLS may be any of the
#   following, please, no spaces in the list if you use several:
#       console
#       console-timed
#       file
#       file-timed
#       syslog
#   LOG_LEVEL may be any of the standard syslog logging levels, though
#   as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones
#   used.
#
[LOGGER]
LOG_FILE: /tmp/dmrlink.log
LOG_HANDLERS: console
LOG_LEVEL: CRITICAL
LOG_NAME: DMRlink


# CONFIGURATION FOR IPSC NETWORKS
# Please read these closely - catastrophic results could result by setting
# certain flags for things DMRlink cannot do.
# 
# [NAME]        The name you want to use to identify the IPSC instance (use
#               something better than "IPSC1"...)
# ENABLED:      Should we communiate with this network? Handy if you need to
#			    shut one down but don't want to lose the config
# RADIO_ID:     This is the radio ID that DMRLink should use to communicate
# IP:           This is the local IPv4 address to listen on. It may be left
                blank if you do not need or wish to specify. It is mostly
                useful when DMRlink uses multiple interfaces to serve as an
                application gatway/proxy from private and/or VPN networks
                to the real world.
# PORT:         This is the UDP source port for DMRLink to use for this
#               IPSC network, must be unique!!!
# ALIVE_TIMER:  Seconds between keep-alive transmissions
# MAX_MISSED:   How many missed keep-alives before we remove a peer
# PEER_OPER:    This signals the master and peers whether or not we are
#               operational. True is the only thing that makes sense.
# IPSC_MODE:    May be 'DIGITAL', 'ANALOG', or 'NONE'. Digital is really the
#               only thing that makes sense.
# TSx_LINK:     Is this time slot linked?
# CSBK_CALL:    Should be False, we cannot process these, but may be useful
#               for debugging.
# RCM:          Repeater Call Monitoring - don't unable unless you plan to
#               actually use it, this craetes extra network traffic.
# CON_APP:      Third Party Console App - exactly what DMRlink is, should
#               be set to True.
# XNL_CALL:     Can cause problems if not set to False, DMRlink does not
#               process XCMP/XNL calls.
# XNL_MASTER:   Obviously, should also be False, see XNL_CALL.
# DATA_CALL:    Process data calls. True if you want to process data calls
# VOICE_CALL:   Process voice calls. True if you want to process voice calls
# MASTER_PEER:  True if DMRlink will be the master, False if we're a peer
# AUTH_ENABLED: Do we use authenticated IPSC?
# AUTH_KEY:     The Authentication key (up to 40 hex characters)
# MASTER_IP:    IP address of the IPSC master (ignored if DMRlink is the master)
# MASTER_PORT:  UDP port of the IPSC master (ignored if DMRlinkn is the master)
#
# ...Repeat the block for each IPSC network to join.
#

[IPSC1]
ENABLED: True
RADIO_ID: 12345
IP: 4.3.2.1
PORT: 50000
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: False
XNL_MASTER: False
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: False
AUTH_ENABLED: True
AUTH_KEY: 1A2B3C
MASTER_IP: 1.2.3.4
MASTER_PORT: 50000