ShaYmez/DMRlink
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
6aee60c84e
DMRlink/confbridge.py
Cort Buffington 509b3b1173 Remove debugging code
2017-05-17 20:56:12 -05:00

493 lines
26 KiB
Python
Executable File
Raw Blame History

#!/usr/bin/env python
#
###############################################################################
# Copyright (C) 2016 Cortney T. Buffington, N0MJS <n0mjs@me.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
###############################################################################
# This is a sample application to bridge traffic between IPSC systems. it uses
# one required (bridge_rules.py) and one optional (known_bridges.py) additional
# configuration files. Both files have their own documentation for use.
#
# "bridge_rules" contains the IPSC network, Timeslot and TGID matching rules to
# determine which voice calls are bridged between IPSC systems and which are
# not.
#
# "known_bridges" contains DMR radio ID numbers of known bridges. This file is
# used when you want bridge.py to be "polite" or serve as a backup bridge. If
# a known bridge exists in either a source OR target IPSC network, then no
# bridging between those IPSC systems will take place. This behavior is
# dynamic and updates each keep-alive interval (main configuration file).
# For faster failover, configure a short keep-alive time and a low number of
# missed keep-alives before timout. I recommend 5 sec keep-alive and 3 missed.
# That gives a worst-case scenario of 15 seconds to fail over. Recovery will
# typically happen with a single "blip" in the transmission up to about 5
# seconds.
#
# While this file is listed as Beta status, K0USY Group depends on this code
# for the bridigng of it's many repeaters. We consider it reliable, but you
# get what you pay for... as usual, no guarantees.
#
# Use to make test strings: #print('PKT:', "\\x".join("{:02x}".format(ord(c)) for c in _data))
from __future__ import print_function
from twisted.internet.protocol import Factory, Protocol
from twisted.protocols.basic import NetstringReceiver
from twisted.internet import reactor
from twisted.internet import task
from binascii import b2a_hex as ahex
from time import time
from importlib import import_module
import cPickle as pickle
from dmr_utils.utils import hex_str_3, hex_str_4, int_id
from dmrlink import IPSC, mk_ipsc_systems, systems, reportFactory, REPORT_OPCODES, build_aliases
from ipsc.ipsc_const import BURST_DATA_TYPE
__author__ = 'Cortney T. Buffington, N0MJS'
__copyright__ = 'Copyright (c) 2013 - 2016 Cortney T. Buffington, N0MJS and the K0USY Group'
__credits__ = 'Adam Fast, KC0YLK; Dave Kierzkowski, KD8EYF; Steve Zingman, N4IRS; Mike Zingman, N4IRR'
__license__ = 'GNU GPLv3'
__maintainer__ = 'Cort Buffington, N0MJS'
__email__ = 'n0mjs@me.com'
# Minimum time between different subscribers transmitting on the same TGID
#
TS_CLEAR_TIME = .2
# Declare this here so that we can define functions around it
#
BRIDGES = {}
# Timed loop used for reporting IPSC status
#
# REPORT BASED ON THE TYPE SELECTED IN THE MAIN CONFIG FILE
def config_reports(_config, _logger, _factory):
if _config['REPORTS']['REPORT_NETWORKS'] == 'PRINT':
def reporting_loop(_logger):
_logger.debug('Periodic Reporting Loop Started (PRINT)')
for system in _config['SYSTEMS']:
print_master(_config, system)
print_peer_list(_config, system)
reporting = task.LoopingCall(reporting_loop, _logger)
reporting.start(_config['REPORTS']['REPORT_INTERVAL'])
report_server = False
elif _config['REPORTS']['REPORT_NETWORKS'] == 'NETWORK':
def reporting_loop(_logger, _server):
_logger.debug('Periodic Reporting Loop Started (NETWORK)')
_server.send_config()
_server.send_bridge()
_logger.info('DMRlink TCP reporting server starting')
report_server = _factory(_config, _logger)
report_server.clients = []
reactor.listenTCP(_config['REPORTS']['REPORT_PORT'], report_server)
reporting = task.LoopingCall(reporting_loop, _logger, report_server)
reporting.start(_config['REPORTS']['REPORT_INTERVAL'])
else:
def reporting_loop(_logger):
_logger.debug('Periodic Reporting Loop Started (NULL)')
report_server = False
return report_server
# Build the conference bridging structure from the bridge file.
#
def make_bridge_config(_confbridge_rules):
try:
bridge_file = import_module(_confbridge_rules)
logger.info('Bridge configuration file found and imported')
except ImportError:
sys.exit('Bridge configuration file not found or invalid')
# Convert integer GROUP ID numbers from the config into hex strings
# we need to send in the actual data packets.
#
for _bridge in bridge_file.BRIDGES:
for _system in bridge_file.BRIDGES[_bridge]:
if _system['SYSTEM'] not in CONFIG['SYSTEMS']:
sys.exit('ERROR: Conference bridges found for system not configured main configuration')
_system['TGID'] = hex_str_3(_system['TGID'])
for i, e in enumerate(_system['ON']):
_system['ON'][i] = hex_str_3(_system['ON'][i])
for i, e in enumerate(_system['OFF']):
_system['OFF'][i] = hex_str_3(_system['OFF'][i])
_system['TIMEOUT'] = _system['TIMEOUT']*60
_system['TIMER'] = time()
return {'BRIDGE_CONF': bridge_file.BRIDGE_CONF, 'BRIDGES': bridge_file.BRIDGES}
# Import subscriber ACL
# ACL may be a single list of subscriber IDs
# Global action is to allow or deny them. Multiple lists with different actions and ranges
# are not yet implemented.
def build_acl(_sub_acl):
try:
acl_file = import_module(_sub_acl)
for i, e in enumerate(acl_file.ACL):
acl_file.ACL[i] = hex_str_3(acl_file.ACL[i])
logger.info('ACL file found and ACL entries imported')
ACL_ACTION = acl_file.ACL_ACTION
ACL = acl_file.ACL_ACTION
except ImportError:
logger.info('ACL file not found or invalid - all subscriber IDs are valid')
ACL_ACTION = 'NONE'
ACL = []
# Depending on which type of ACL is used (PERMIT, DENY... or there isn't one)
# define a differnet function to be used to check the ACL
global allow_sub
if ACL_ACTION == 'PERMIT':
def allow_sub(_sub):
if _sub in ACL:
return True
else:
return False
elif ACL_ACTION == 'DENY':
def allow_sub(_sub):
if _sub not in ACL:
return True
else:
return False
else:
def allow_sub(_sub):
return True
return ACL
# Run this every minute for rule timer updates
def rule_timer_loop():
logger.info('(ALL IPSC SYSTEMS) Rule timer loop started')
_now = time()
for _bridge in BRIDGES:
for _system in BRIDGES[_bridge]:
if _system['TO_TYPE'] == 'ON':
if _system['ACTIVE'] == True:
if _system['TIMER'] < _now:
_system['ACTIVE'] = False
logger.info('Conference Bridge TIMEOUT: DEACTIVATE System: %s, Bridge: %s, TS: %s, TGID: %s', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']))
else:
timeout_in = _system['TIMER'] - _now
logger.info('Conference Bridge ACTIVE (ON timer running): System: %s Bridge: %s, TS: %s, TGID: %s, Timeout in: %ss,', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']), timeout_in)
elif _system['ACTIVE'] == False:
logger.debug('Conference Bridge INACTIVE (no change): System: %s Bridge: %s, TS: %s, TGID: %s', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']))
elif _system['TO_TYPE'] == 'OFF':
if _system['ACTIVE'] == False:
if _system['TIMER'] < _now:
_system['ACTIVE'] = True
logger.info('Conference Bridge TIMEOUT: ACTIVATE System: %s, Bridge: %s, TS: %s, TGID: %s', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']))
else:
timeout_in = _system['TIMER'] - _now
logger.info('Conference Bridge INACTIVE (OFF timer running): System: %s Bridge: %s, TS: %s, TGID: %s, Timeout in: %ss,', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']), timeout_in)
elif _system['ACTIVE'] == True:
logger.debug('Conference Bridge ACTIVE (no change): System: %s Bridge: %s, TS: %s, TGID: %s', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']))
else:
logger.debug('Conference Bridge NO ACTION: System: %s, Bridge: %s, TS: %s, TGID: %s', _system['SYSTEM'], _bridge, _system['TS'], int_id(_system['TGID']))
if BRIDGE_CONF['REPORT'] == 'network':
report_server.send_clients('bridge updated')
class confbridgeIPSC(IPSC):
def __init__(self, _name, _config, _logger, _report):
IPSC.__init__(self, _name, _config, _logger, _report)
self.STATUS = {
1: {'RX_TGID':'\x00', 'TX_TGID':'\x00', 'RX_TIME':0, 'TX_TIME':0, 'RX_SRC_SUB':'\x00', 'TX_SRC_SUB':'\x00'},
2: {'RX_TGID':'\x00', 'TX_TGID':'\x00', 'RX_TIME':0, 'TX_TIME':0, 'RX_SRC_SUB':'\x00', 'TX_SRC_SUB':'\x00'}
}
self.last_seq_id = '\x00'
self.call_start = 0
#************************************************
# CALLBACK FUNCTIONS FOR USER PACKET TYPES
#************************************************
#
def group_voice(self, _src_sub, _dst_group, _ts, _end, _peerid, _data):
# Check for ACL match, and return if the subscriber is not allowed
if allow_sub(_src_sub) == False:
self._logger.warning('(%s) Group Voice Packet ***REJECTED BY ACL*** From: %s, IPSC Peer %s, Destination %s', self._system, int_id(_src_sub), int_id(_peerid), int_id(_dst_group))
return
# Process the packet
self._logger.debug('(%s) Group Voice Packet Received From: %s, IPSC Peer %s, Destination %s', self._system, int_id(_src_sub), int_id(_peerid), int_id(_dst_group))
_burst_data_type = _data[30] # Determine the type of voice packet this is (see top of file for possible types)
_seq_id = _data[5]
now = time() # Mark packet arrival time -- we'll need this for call contention handling
for _bridge in BRIDGES:
for _system in BRIDGES[_bridge]:
if (_system['SYSTEM'] == self._system and _system['TGID'] == _dst_group and _system['TS'] == _ts and _system['ACTIVE'] == True):
for _target in BRIDGES[_bridge]:
if _target['SYSTEM'] != self._system:
if _target['ACTIVE']:
_target_status = systems[_target['SYSTEM']].STATUS
_target_system = self._CONFIG['SYSTEMS'][_target['SYSTEM']]
# BEGIN CONTENTION HANDLING
#
# The rules for each of the 4 "ifs" below are listed here for readability. The Frame To Send is:
# From a different group than last RX from this IPSC, but it has been less than Group Hangtime
# From a different group than last TX to this IPSC, but it has been less than Group Hangtime
# From the same group as the last RX from this IPSC, but from a different subscriber, and it has been less than TS Clear Time
# From the same group as the last TX to this IPSC, but from a different subscriber, and it has been less than TS Clear Time
# The "continue" at the end of each means the next iteration of the for loop that tests for matching rules
#
if ((_target['TGID'] != _target_status[_target['TS']]['RX_TGID']) and ((now - _target_status[_target['TS']]['RX_TIME']) < _target_system['LOCAL']['GROUP_HANGTIME'])):
if _burst_data_type == BURST_DATA_TYPE['VOICE_HEAD']:
self._logger.info('(%s) Call not bridged to TGID%s, target active or in group hangtime: IPSC: %s, TS: %s, TGID: %s', self._system, int_id(_target['TGID']), _target['SYSTEM'], _target['TS'], int_id(_target_status[_target['TS']]['RX_TGID']))
continue
if ((_target['TGID'] != _target_status[_target['TS']]['TX_TGID']) and ((now - _target_status[_target['TS']]['TX_TIME']) < _target_system['LOCAL']['GROUP_HANGTIME'])):
if _burst_data_type == BURST_DATA_TYPE['VOICE_HEAD']:
self._logger.info('(%s) Call not bridged to TGID%s, target in group hangtime: IPSC: %s, TS: %s, TGID: %s', self._system, int_id(_target['TGID']), _target['SYSTEM'], _target['TS'], int_id(_target_status[_target['TS']]['TX_TGID']))
continue
if (_target['TGID'] == _target_status[_target['TS']]['RX_TGID']) and ((now - _target_status[_target['TS']]['RX_TIME']) < TS_CLEAR_TIME):
if _burst_data_type == BURST_DATA_TYPE['VOICE_HEAD']:
self._logger.info('(%s) Call not bridged to TGID%s, matching call already active on target: IPSC: %s, TS: %s, TGID: %s', self._system, int_id(_target['TGID']), _target['SYSTEM'], _target['TS'], int_id(_target_status[_target['TS']]['RX_TGID']))
continue
if (_target['TGID'] == _target_status[_target['TS']]['TX_TGID']) and (_src_sub != _target_status[_target['TS']]['TX_SRC_SUB']) and ((now - _target_status[_target['TS']]['TX_TIME']) < TS_CLEAR_TIME):
if _burst_data_type == BURST_DATA_TYPE['VOICE_HEAD']:
self._logger.info('(%s) Call not bridged for subscriber %s, call bridge in progress on target: IPSC: %s, TS: %s, TGID: %s SUB: %s', self._system, int_id(_src_sub), _target['SYSTEM'], _target['TGID'], int_id(_target_status[_target['TS']]['TX_TGID']), int_id(_target_status[_target['TS']]['TX_SRC_SUB']))
continue
#
# END CONTENTION HANDLING
#
#
# BEGIN FRAME FORWARDING
#
# Make a copy of the payload
_tmp_data = _data
# Re-Write the IPSC SRC to match the target network's ID
_tmp_data = _tmp_data.replace(_peerid, _target_system['LOCAL']['RADIO_ID'])
# Re-Write the destination Group ID
_tmp_data = _tmp_data.replace(_dst_group, _target['TGID'])
# Re-Write IPSC timeslot value
_call_info = int_id(_data[17:18])
if _target['TS'] == 1:
_call_info &= ~(1 << 5)
elif _target['TS'] == 2:
_call_info |= 1 << 5
_call_info = chr(_call_info)
_tmp_data = _tmp_data[:17] + _call_info + _tmp_data[18:]
# Re-Write DMR timeslot value
# Determine if the slot is present, so we can translate if need be
if _burst_data_type == BURST_DATA_TYPE['SLOT1_VOICE'] or _burst_data_type == BURST_DATA_TYPE['SLOT2_VOICE']:
_slot_valid = True
else:
_slot_valid = False
# Re-Write timeslot if necessary...
if _slot_valid:
if _target['TS'] == 1:
_burst_data_type = BURST_DATA_TYPE['SLOT1_VOICE']
elif _target['TS'] == 1:
_burst_data_type = BURST_DATA_TYPE['SLOT2_VOICE']
_tmp_data = _tmp_data[:30] + _burst_data_type + _tmp_data[31:]
# Send the packet to all peers in the target IPSC
systems[_target['SYSTEM']].send_to_ipsc(_tmp_data)
#
# END FRAME FORWARDING
#
# Set values for the contention handler to test next time there is a frame to forward
_target_status[_target['TS']]['TX_TGID'] = _target['TGID']
_target_status[_target['TS']]['TX_TIME'] = now
_target_status[_target['TS']]['TX_SRC_SUB'] = _src_sub
# Mark the group and time that a packet was recieved for the contention handler to use later
self.STATUS[_ts]['RX_TGID'] = _dst_group
self.STATUS[_ts]['RX_TIME'] = now
#
# BEGIN IN-BAND SIGNALING BASED ON TGID & VOICE TERMINATOR FRAME
#
# Activate/Deactivate rules based on group voice activity -- PTT or UA for you c-Bridge dorks.
# This will ONLY work for symmetrical rules!!!
# Action happens on key up
if _burst_data_type == BURST_DATA_TYPE['VOICE_HEAD']:
if self.last_seq_id != _seq_id or (self.call_start + TS_CLEAR_TIME) < now:
self.last_seq_id = _seq_id
self.call_start = now
self._logger.info('(%s) GROUP VOICE START: CallID: %s PEER: %s, SUB: %s, TS: %s, TGID: %s', self._system, int_id(_seq_id), int_id(_peerid), int_id(_src_sub), _ts, int_id(_dst_group))
if self._CONFIG['REPORTS']['REPORT_NETWORKS'] == 'NETWORK':
self._report.send_bridgeEvent('({}) GROUP VOICE START: CallID: {} PEER: {}, SUB: {}, TS: {}, TGID: {}'.format(self._system, int_id(_seq_id), int_id(_peerid), int_id(_src_sub), _ts, int_id(_dst_group)))
# Action happens on un-key
if _burst_data_type == BURST_DATA_TYPE['VOICE_TERM']:
if self.last_seq_id == _seq_id:
self.call_duration = now - self.call_start
self._logger.info('(%s) GROUP VOICE END: CallID: %s PEER: %s, SUB: %s, TS: %s, TGID: %s Duration: %.2fs', self._system, int_id(_seq_id), int_id(_peerid), int_id(_src_sub), _ts, int_id(_dst_group), self.call_duration)
if self._CONFIG['REPORTS']['REPORT_NETWORKS'] == 'NETWORK':
self._report.send_bridgeEvent('({}) GROUP VOICE END: CallID: {} PEER: {}, SUB: {}, TS: {}, TGID: {} Duration: {:.2f}s'.format(self._system, int_id(_seq_id), int_id(_peerid), int_id(_src_sub), _ts, int_id(_dst_group), self.call_duration))
else:
self._logger.warning('(%s) GROUP VOICE END WITHOUT MATCHING START: CallID: %s PEER: %s, SUB: %s, TS: %s, TGID: %s', self._system, int_id(_seq_id), int_id(_peerid), int_id(_src_sub), _ts, int_id(_dst_group))
if self._CONFIG['REPORTS']['REPORT_NETWORKS'] == 'NETWORK':
self._report.send_bridgeEvent('(%s) GROUP VOICE END WITHOUT MATCHING START: CallID: %s PEER: %s, SUB: %s, TS: %s, TGID: %s'.format(self._system, int_id(_seq_id), int_id(_peerid), int_id(_src_sub), _ts, int_id(_dst_group)))
# Iterate the rules dictionary
for _bridge in BRIDGES:
for _system in BRIDGES[_bridge]:
if _system['SYSTEM'] == self._system:
# TGID matches an ACTIVATION trigger
if _dst_group in _system['ON']:
# Set the matching rule as ACTIVE
if _system['ACTIVE'] == False:
_system['ACTIVE'] = True
self._logger.info('(%s) Bridge: %s, connection changed to state: %s', self._system, _bridge, _system['ACTIVE'])
# Cancel the timer if we've enabled an "OFF" type timeout
if _system['TO_TYPE'] == 'OFF':
_system['TIMER'] = now
self._logger.info('(%s) Bridge: %s set to "OFF" with an on timer rule: timeout timer cancelled', self._system, _bridge)
# Reset the timer for the rule
if _system['ACTIVE'] == True and _system['TO_TYPE'] == 'ON':
_system['TIMER'] = now + _system['TIMEOUT']
self._logger.info('(%s) Bridge: %s, timeout timer reset to: %s', self._system, _bridge, _system['TIMER'] - now)
# TGID matches an DE-ACTIVATION trigger
if _dst_group in _system['OFF']:
# Set the matching rule as ACTIVE
if _system['ACTIVE'] == True:
_system['ACTIVE'] = False
self._logger.info('(%s) Bridge: %s, connection changed to state: %s', self._system, _bridge, _system['ACTIVE'])
# Cancel the timer if we've enabled an "ON" type timeout
if _system['TO_TYPE'] == 'ON':
_system['TIMER'] = now
self._logger.info('(%s) Bridge: %s set to ON with and "OFF" timer rule: timeout timer cancelled', self._system, _bridge)
# Reset tge timer for the rule
if _system['ACTIVE'] == False and _system['TO_TYPE'] == 'OFF':
_system['TIMER'] = now + _system['TIMEOUT']
self._logger.info('(%s) Bridge: %s, timeout timer reset to: %s', self._system, _bridge, _system['TIMER'] - now)
# Cancel the timer if we've enabled an "ON" type timeout
if _system['ACTIVE'] == True and _system['TO_TYPE'] == 'ON':
_system['TIMER'] = now
self._logger.info('(%s) Bridge: %s set to ON with and "OFF" timer rule: timeout timer cancelled', self._system, _bridge)
#
# END IN-BAND SIGNALLING
#
class confbridgeReportFactory(reportFactory):
def send_bridge(self):
serialized = pickle.dumps(BRIDGES, protocol=pickle.HIGHEST_PROTOCOL)
self.send_clients(REPORT_OPCODES['BRIDGE_SND']+serialized)
def send_bridgeEvent(self, _data):
self.send_clients(REPORT_OPCODES['BRDG_EVENT']+_data)
if __name__ == '__main__':
import argparse
import sys
import os
import signal
from ipsc.dmrlink_config import build_config
from ipsc.dmrlink_log import config_logging
# Change the current directory to the location of the application
os.chdir(os.path.dirname(os.path.realpath(sys.argv[0])))
# CLI argument parser - handles picking up the config file from the command line, and sending a "help" message
parser = argparse.ArgumentParser()
parser.add_argument('-c', '--config', action='store', dest='CFG_FILE', help='/full/path/to/config.file (usually dmrlink.cfg)')
parser.add_argument('-ll', '--log_level', action='store', dest='LOG_LEVEL', help='Override config file logging level.')
parser.add_argument('-lh', '--log_handle', action='store', dest='LOG_HANDLERS', help='Override config file logging handler.')
cli_args = parser.parse_args()
if not cli_args.CFG_FILE:
cli_args.CFG_FILE = os.path.dirname(os.path.abspath(__file__))+'/dmrlink.cfg'
# Call the external routine to build the configuration dictionary
CONFIG = build_config(cli_args.CFG_FILE)
# Call the external routing to start the system logger
if cli_args.LOG_LEVEL:
CONFIG['LOGGER']['LOG_LEVEL'] = cli_args.LOG_LEVEL
if cli_args.LOG_HANDLERS:
CONFIG['LOGGER']['LOG_HANDLERS'] = cli_args.LOG_HANDLERS
logger = config_logging(CONFIG['LOGGER'])
logger.info('DMRlink \'dmrlink.py\' (c) 2013 - 2015 N0MJS & the K0USY Group - SYSTEM STARTING...')
# Set signal handers so that we can gracefully exit if need be
def sig_handler(_signal, _frame):
logger.info('*** DMRLINK IS TERMINATING WITH SIGNAL %s ***', str(_signal))
for system in systems:
systems[system].de_register_self()
reactor.stop()
for sig in [signal.SIGTERM, signal.SIGINT, signal.SIGQUIT]:
signal.signal(sig, sig_handler)
# INITIALIZE THE REPORTING LOOP
report_server = config_reports(CONFIG, logger, confbridgeReportFactory)
# Build ID Aliases
peer_ids, subscriber_ids, talkgroup_ids, local_ids = build_aliases(CONFIG, logger)
# INITIALIZE AN IPSC OBJECT (SELF SUSTAINING) FOR EACH CONFIGURED IPSC
systems = mk_ipsc_systems(CONFIG, logger, systems, confbridgeIPSC, report_server)
# CONFBRIDGE.PY SPECIFIC ITEMS GO HERE:
# Build the routing rules and other configuration
CONFIG_DICT = make_bridge_config('confbridge_rules')
BRIDGE_CONF = CONFIG_DICT['BRIDGE_CONF']
BRIDGES = CONFIG_DICT['BRIDGES']
# Build the Access Control List
ACL = build_acl('sub_acl')
# Initialize the rule timer loop
rule_timer = task.LoopingCall(rule_timer_loop)
rule_timer.start(60)
# INITIALIZATION COMPLETE -- START THE REACTOR
reactor.run()
Reference in New Issue View Git Blame Copy Permalink