DMRlink/ambe_audio.cfg
2016-07-10 09:53:36 -04:00

54 lines
2.2 KiB
INI
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

################################################
# ambe_audio configuration file.
################################################
# DEFAULTS - General settings. These values are
#inherited in each subsequent section (defined by section value).
[DEFAULTS]
debug = False # Debug output for each VOICE frame
outToFile = False # Write each AMBE frame to a file called ambe.bin
outToUDP = True # Send each AMBE frame to the _sock object (turn on/off DMRGateway operation)
gateway = 127.0.0.1 # IP address of DMRGateway app
toGatewayPort = 31000 # Port DMRGateway is listening on for AMBE frames to decode
remoteControlPort = 31002 # Port that ambe_audio is listening on for remote control commands
fromGatewayPort = 31003 # Port to listen on for AMBE frames to transmit to all peers
gatewayDmrId = 0 # id to use when transmitting from the gateway
tgFilter = 9 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
txTg = 9 # TG to use for all frames received from DMRGateway -> IPSC
txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC
#
# The section setting defines the current section to use. By default, the ENABLED section in dmrlink.cfg is used.
# Any values in the named section override the values from the DEFAULTS section. For example, if the BM section
# has a value for gatewayDmrId it would override the value above. Only one section should be set here. Think
# of this as an easy way to switch between several different configurations with a single line.
#
#section = BM # Use BM section values
#section = Sandbox # Use SANDBOX section values
[BM] # BrandMeister
tgFilter = 3100,31094 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
txTg = 3100 # TG to use for all frames received from DMRGateway -> IPSC
txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC
[BM2] # Alternate BM configuration
tgFilter = 31094
txTg = 31094
txTs = 2
[Sandbox] # DMR MARC sandbox network
tgFilter = 3120
txTg = 3120
txTs = 2
[Sandbox2] # DMR MARC sandbox network
tgFilter = 1
txTg = 1
txTs = 1
[N4IRS] # N4IRS/INAD network
tgFilter = 1,2,3,13,3174,3777215,3100,9,9998,3112,3136,310,311,312,9997
txTg = 9998
txTs = 2