Update sample config
This commit is contained in:
Simon
parent
a83dcab270
commit
47a14e60e4
188
FreeDMR-SAMPLE-commented.cfg
Executable file
188
FreeDMR-SAMPLE-commented.cfg
Executable file
@ -0,0 +1,188 @@
|
|||||||
|
# PROGRAM-WIDE PARAMETERS GO HERE
|
||||||
|
# PATH - working path for files, leave it alone unless you NEED to change it
|
||||||
|
# PING_TIME - the interval that peers will ping the master, and re-try registraion
|
||||||
|
# - how often the Master maintenance loop runs
|
||||||
|
# MAX_MISSED - how many pings are missed before we give up and re-register
|
||||||
|
# - number of times the master maintenance loop runs before de-registering a peer
|
||||||
|
#
|
||||||
|
# ACLs:
|
||||||
|
#
|
||||||
|
# Access Control Lists are a very powerful tool for administering your system.
|
||||||
|
# But they consume packet processing time. Disable them if you are not using them.
|
||||||
|
# But be aware that, as of now, the configuration stanzas still need the ACL
|
||||||
|
# sections configured even if you're not using them.
|
||||||
|
#
|
||||||
|
# REGISTRATION ACLS ARE ALWAYS USED, ONLY SUBSCRIBER AND TGID MAY BE DISABLED!!!
|
||||||
|
#
|
||||||
|
# The 'action' May be PERMIT|DENY
|
||||||
|
# Each entry may be a single radio id, or a hypenated range (e.g. 1-2999)
|
||||||
|
# Format:
|
||||||
|
# ACL = 'action:id|start-end|,id|start-end,....'
|
||||||
|
# --for example--
|
||||||
|
# SUB_ACL: DENY:1,1000-2000,4500-60000,17
|
||||||
|
#
|
||||||
|
# ACL Types:
|
||||||
|
# REG_ACL: peer radio IDs for registration (only used on HBP master systems)
|
||||||
|
# SUB_ACL: subscriber IDs for end-users
|
||||||
|
# TGID_TS1_ACL: destination talkgroup IDs on Timeslot 1
|
||||||
|
# TGID_TS2_ACL: destination talkgroup IDs on Timeslot 2
|
||||||
|
#
|
||||||
|
# ACLs may be repeated for individual systems if needed for granularity
|
||||||
|
# Global ACLs will be processed BEFORE the system level ACLs
|
||||||
|
# Packets will be matched against all ACLs, GLOBAL first. If a packet 'passes'
|
||||||
|
# All elements, processing continues. Packets are discarded at the first
|
||||||
|
# negative match, or 'reject' from an ACL element.
|
||||||
|
#
|
||||||
|
# If you do not wish to use ACLs, set them to 'PERMIT:ALL'
|
||||||
|
# TGID_TS1_ACL in the global stanza is used for OPENBRIDGE systems, since all
|
||||||
|
# traffic is passed as TS 1 between OpenBridges
|
||||||
|
[GLOBAL]
|
||||||
|
PATH: ./
|
||||||
|
PING_TIME: 10
|
||||||
|
MAX_MISSED: 3
|
||||||
|
USE_ACL: True
|
||||||
|
REG_ACL: PERMIT:ALL
|
||||||
|
SUB_ACL: DENY:1
|
||||||
|
TGID_TS1_ACL: PERMIT:ALL
|
||||||
|
TGID_TS2_ACL: PERMIT:ALL
|
||||||
|
GEN_STAT_BRIDGES: False
|
||||||
|
ALLOW_NULL_PASSPHRASE: False
|
||||||
|
ANNOUNCEMENT_LANGUAGE: en_GB
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# NOT YET WORKING: NETWORK REPORTING CONFIGURATION
|
||||||
|
# Enabling "REPORT" will configure a socket-based reporting
|
||||||
|
# system that will send the configuration and other items
|
||||||
|
# to a another process (local or remote) that may process
|
||||||
|
# the information for some useful purpose, like a web dashboard.
|
||||||
|
#
|
||||||
|
# REPORT - True to enable, False to disable
|
||||||
|
# REPORT_INTERVAL - Seconds between reports
|
||||||
|
# REPORT_PORT - TCP port to listen on if "REPORT_NETWORKS" = NETWORK
|
||||||
|
# REPORT_CLIENTS - comma separated list of IPs you will allow clients
|
||||||
|
# to connect on. Entering a * will allow all.
|
||||||
|
#
|
||||||
|
# ****FOR NOW MUST BE TRUE - USE THE LOOPBACK IF YOU DON'T USE THIS!!!****
|
||||||
|
[REPORTS]
|
||||||
|
REPORT: True
|
||||||
|
REPORT_INTERVAL: 60
|
||||||
|
REPORT_PORT: 4321
|
||||||
|
REPORT_CLIENTS: 127.0.0.1
|
||||||
|
|
||||||
|
|
||||||
|
# SYSTEM LOGGER CONFIGURAITON
|
||||||
|
# This allows the logger to be configured without chaning the individual
|
||||||
|
# python logger stuff. LOG_FILE should be a complete path/filename for *your*
|
||||||
|
# system -- use /dev/null for non-file handlers.
|
||||||
|
# LOG_HANDLERS may be any of the following, please, no spaces in the
|
||||||
|
# list if you use several:
|
||||||
|
# null
|
||||||
|
# console
|
||||||
|
# console-timed
|
||||||
|
# file
|
||||||
|
# file-timed
|
||||||
|
# syslog
|
||||||
|
# LOG_LEVEL may be any of the standard syslog logging levels, though
|
||||||
|
# as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones
|
||||||
|
# used.
|
||||||
|
#
|
||||||
|
[LOGGER]
|
||||||
|
LOG_FILE: /tmp/hblink.log
|
||||||
|
LOG_HANDLERS: console-timed
|
||||||
|
LOG_LEVEL: DEBUG
|
||||||
|
LOG_NAME: HBlink
|
||||||
|
|
||||||
|
# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES
|
||||||
|
# Ok, not the TGID, there's no master list I know of to download
|
||||||
|
# This is intended as a facility for other applcations built on top of
|
||||||
|
# HBlink to use, and will NOT be used in HBlink directly.
|
||||||
|
# STALE_DAYS is the number of days since the last download before we
|
||||||
|
# download again. Don't be an ass and change this to less than a few days.
|
||||||
|
[ALIASES]
|
||||||
|
TRY_DOWNLOAD: True
|
||||||
|
PATH: ./
|
||||||
|
PEER_FILE: peer_ids.json
|
||||||
|
SUBSCRIBER_FILE: subscriber_ids.json
|
||||||
|
TGID_FILE: talkgroup_ids.json
|
||||||
|
PEER_URL: https://www.radioid.net/static/rptrs.json
|
||||||
|
SUBSCRIBER_URL: https://www.radioid.net/static/users.json
|
||||||
|
STALE_DAYS: 7
|
||||||
|
|
||||||
|
#Read further repeater configs from MySQL
|
||||||
|
[MYSQL]
|
||||||
|
USE_MYSQL: False
|
||||||
|
USER: hblink
|
||||||
|
PASS: mypassword
|
||||||
|
DB: hblink
|
||||||
|
SERVER: 127.0.0.1
|
||||||
|
PORT: 3306
|
||||||
|
TABLE: repeaters
|
||||||
|
|
||||||
|
# OPENBRIDGE INSTANCES - DUPLICATE SECTION FOR MULTIPLE CONNECTIONS
|
||||||
|
# OpenBridge is a protocol originall created by DMR+ for connection between an
|
||||||
|
# IPSC2 server and Brandmeister. It has been implemented here at the suggestion
|
||||||
|
# of the Brandmeister team as a way to legitimately connect HBlink to the
|
||||||
|
# Brandemiester network.
|
||||||
|
# It is recommended to name the system the ID of the Brandmeister server that
|
||||||
|
# it connects to, but is not necessary. TARGET_IP and TARGET_PORT are of the
|
||||||
|
# Brandmeister or IPSC2 server you are connecting to. PASSPHRASE is the password
|
||||||
|
# that must be agreed upon between you and the operator of the server you are
|
||||||
|
# connecting to. NETWORK_ID is a number in the format of a DMR Radio ID that
|
||||||
|
# will be sent to the other server to identify this connection.
|
||||||
|
# other parameters follow the other system types.
|
||||||
|
#
|
||||||
|
# ACLs:
|
||||||
|
# OpenBridge does not 'register', so registration ACL is meaningless.
|
||||||
|
# OpenBridge passes all traffic on TS1, so there is only 1 TGID ACL.
|
||||||
|
# Otherwise ACLs work as described in the global stanza
|
||||||
|
[OBP-TEST]
|
||||||
|
MODE: OPENBRIDGE
|
||||||
|
ENABLED: False
|
||||||
|
IP:
|
||||||
|
PORT: 62044
|
||||||
|
NETWORK_ID: 1
|
||||||
|
PASSPHRASE: mypass
|
||||||
|
TARGET_IP:
|
||||||
|
TARGET_PORT: 62044
|
||||||
|
USE_ACL: True
|
||||||
|
SUB_ACL: DENY:1
|
||||||
|
TGID_ACL: PERMIT:ALL
|
||||||
|
RELAX_CHECKS: False
|
||||||
|
ENHANCED_OBP: False
|
||||||
|
|
||||||
|
# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS
|
||||||
|
# HomeBrew Protocol Master instances go here.
|
||||||
|
# IP may be left blank if there's one interface on your system.
|
||||||
|
# Port should be the port you want this master to listen on. It must be unique
|
||||||
|
# and unused by anything else.
|
||||||
|
# Repeat - if True, the master repeats traffic to peers, False, it does nothing.
|
||||||
|
#
|
||||||
|
# MAX_PEERS -- maximun number of peers that may be connect to this master
|
||||||
|
# at any given time. This is very handy if you're allowing hotspots to
|
||||||
|
# connect, or using a limited computer like a Raspberry Pi.
|
||||||
|
#
|
||||||
|
# ACLs:
|
||||||
|
# See comments in the GLOBAL stanza
|
||||||
|
[G9XYZ]
|
||||||
|
MODE: MASTER
|
||||||
|
ENABLED: False
|
||||||
|
REPEAT: True
|
||||||
|
MAX_PEERS: 1
|
||||||
|
EXPORT_AMBE: False
|
||||||
|
IP:
|
||||||
|
PORT: 54001
|
||||||
|
PASSPHRASE: passw0rd
|
||||||
|
GROUP_HANGTIME: 5
|
||||||
|
USE_ACL: True
|
||||||
|
REG_ACL: DENY:1
|
||||||
|
SUB_ACL: DENY:1
|
||||||
|
TGID_TS1_ACL: PERMIT:ALL
|
||||||
|
TGID_TS2_ACL: PERMIT:ALL
|
||||||
|
DEFAULT_UA_TIMER: 10
|
||||||
|
SINGLE_MODE: True
|
||||||
|
VOICE_IDENT: True
|
||||||
|
TS1_STATIC:
|
||||||
|
TS2_STATIC:
|
||||||
|
DEFAULT_REFLECTOR: 0
|
||||||
|
GENERATOR: 1
|
||||||
@ -1,59 +0,0 @@
|
|||||||
[GLOBAL]
|
|
||||||
PATH: ./
|
|
||||||
PING_TIME: 10
|
|
||||||
MAX_MISSED: 3
|
|
||||||
USE_ACL: True
|
|
||||||
REG_ACL: PERMIT:ALL
|
|
||||||
SUB_ACL: DENY:1
|
|
||||||
TGID_TS1_ACL: PERMIT:ALL
|
|
||||||
TGID_TS2_ACL: PERMIT:ALL
|
|
||||||
GEN_STAT_BRIDGES: False
|
|
||||||
ALLOW_NULL_PASSPHRASE: False
|
|
||||||
ANNOUNCEMENT_LANGUAGE: en_GB
|
|
||||||
|
|
||||||
[REPORTS]
|
|
||||||
REPORT: True
|
|
||||||
REPORT_INTERVAL: 60
|
|
||||||
REPORT_PORT: 4321
|
|
||||||
REPORT_CLIENTS: 127.0.0.1
|
|
||||||
|
|
||||||
[LOGGER]
|
|
||||||
LOG_FILE: freedmr.log
|
|
||||||
LOG_HANDLERS: console-timed
|
|
||||||
LOG_LEVEL: DEBUG
|
|
||||||
LOG_NAME: HBlink
|
|
||||||
|
|
||||||
[ALIASES]
|
|
||||||
TRY_DOWNLOAD: True
|
|
||||||
PATH: ./
|
|
||||||
PEER_FILE: peer_ids.json
|
|
||||||
SUBSCRIBER_FILE: subscriber_ids.json
|
|
||||||
TGID_FILE: talkgroup_ids.json
|
|
||||||
PEER_URL: https://www.radioid.net/static/rptrs.json
|
|
||||||
SUBSCRIBER_URL: https://www.radioid.net/static/users.json
|
|
||||||
STALE_DAYS: 7
|
|
||||||
|
|
||||||
[MYSQL]
|
|
||||||
USE_MYSQL: False
|
|
||||||
USER: hblink
|
|
||||||
PASS: mypassword
|
|
||||||
DB: hblink
|
|
||||||
SERVER: 127.0.0.1
|
|
||||||
PORT: 3306
|
|
||||||
TABLE: repeaters
|
|
||||||
|
|
||||||
[OBP-TEST]
|
|
||||||
MODE: OPENBRIDGE
|
|
||||||
ENABLED: False
|
|
||||||
IP:
|
|
||||||
PORT: 62044
|
|
||||||
NETWORK_ID: 1
|
|
||||||
PASSPHRASE: mypass
|
|
||||||
TARGET_IP:
|
|
||||||
TARGET_PORT: 62044
|
|
||||||
USE_ACL: True
|
|
||||||
SUB_ACL: DENY:1
|
|
||||||
TGID_ACL: PERMIT:ALL
|
|
||||||
RELAX_CHECKS: True
|
|
||||||
ENHANCED_OBP: True
|
|
||||||
|
|
||||||
@ -1,41 +1,3 @@
|
|||||||
# PROGRAM-WIDE PARAMETERS GO HERE
|
|
||||||
# PATH - working path for files, leave it alone unless you NEED to change it
|
|
||||||
# PING_TIME - the interval that peers will ping the master, and re-try registraion
|
|
||||||
# - how often the Master maintenance loop runs
|
|
||||||
# MAX_MISSED - how many pings are missed before we give up and re-register
|
|
||||||
# - number of times the master maintenance loop runs before de-registering a peer
|
|
||||||
#
|
|
||||||
# ACLs:
|
|
||||||
#
|
|
||||||
# Access Control Lists are a very powerful tool for administering your system.
|
|
||||||
# But they consume packet processing time. Disable them if you are not using them.
|
|
||||||
# But be aware that, as of now, the configuration stanzas still need the ACL
|
|
||||||
# sections configured even if you're not using them.
|
|
||||||
#
|
|
||||||
# REGISTRATION ACLS ARE ALWAYS USED, ONLY SUBSCRIBER AND TGID MAY BE DISABLED!!!
|
|
||||||
#
|
|
||||||
# The 'action' May be PERMIT|DENY
|
|
||||||
# Each entry may be a single radio id, or a hypenated range (e.g. 1-2999)
|
|
||||||
# Format:
|
|
||||||
# ACL = 'action:id|start-end|,id|start-end,....'
|
|
||||||
# --for example--
|
|
||||||
# SUB_ACL: DENY:1,1000-2000,4500-60000,17
|
|
||||||
#
|
|
||||||
# ACL Types:
|
|
||||||
# REG_ACL: peer radio IDs for registration (only used on HBP master systems)
|
|
||||||
# SUB_ACL: subscriber IDs for end-users
|
|
||||||
# TGID_TS1_ACL: destination talkgroup IDs on Timeslot 1
|
|
||||||
# TGID_TS2_ACL: destination talkgroup IDs on Timeslot 2
|
|
||||||
#
|
|
||||||
# ACLs may be repeated for individual systems if needed for granularity
|
|
||||||
# Global ACLs will be processed BEFORE the system level ACLs
|
|
||||||
# Packets will be matched against all ACLs, GLOBAL first. If a packet 'passes'
|
|
||||||
# All elements, processing continues. Packets are discarded at the first
|
|
||||||
# negative match, or 'reject' from an ACL element.
|
|
||||||
#
|
|
||||||
# If you do not wish to use ACLs, set them to 'PERMIT:ALL'
|
|
||||||
# TGID_TS1_ACL in the global stanza is used for OPENBRIDGE systems, since all
|
|
||||||
# traffic is passed as TS 1 between OpenBridges
|
|
||||||
[GLOBAL]
|
[GLOBAL]
|
||||||
PATH: ./
|
PATH: ./
|
||||||
PING_TIME: 10
|
PING_TIME: 10
|
||||||
@ -45,60 +7,22 @@ REG_ACL: PERMIT:ALL
|
|||||||
SUB_ACL: DENY:1
|
SUB_ACL: DENY:1
|
||||||
TGID_TS1_ACL: PERMIT:ALL
|
TGID_TS1_ACL: PERMIT:ALL
|
||||||
TGID_TS2_ACL: PERMIT:ALL
|
TGID_TS2_ACL: PERMIT:ALL
|
||||||
GEN_STAT_BRIDGES: False
|
GEN_STAT_BRIDGES: True
|
||||||
ALLOW_NULL_PASSPHRASE: False
|
ALLOW_NULL_PASSPHRASE: True
|
||||||
ANNOUNCEMENT_LANGUAGE: en_GB
|
ANNOUNCEMENT_LANGUAGE: en_GB
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# NOT YET WORKING: NETWORK REPORTING CONFIGURATION
|
|
||||||
# Enabling "REPORT" will configure a socket-based reporting
|
|
||||||
# system that will send the configuration and other items
|
|
||||||
# to a another process (local or remote) that may process
|
|
||||||
# the information for some useful purpose, like a web dashboard.
|
|
||||||
#
|
|
||||||
# REPORT - True to enable, False to disable
|
|
||||||
# REPORT_INTERVAL - Seconds between reports
|
|
||||||
# REPORT_PORT - TCP port to listen on if "REPORT_NETWORKS" = NETWORK
|
|
||||||
# REPORT_CLIENTS - comma separated list of IPs you will allow clients
|
|
||||||
# to connect on. Entering a * will allow all.
|
|
||||||
#
|
|
||||||
# ****FOR NOW MUST BE TRUE - USE THE LOOPBACK IF YOU DON'T USE THIS!!!****
|
|
||||||
[REPORTS]
|
[REPORTS]
|
||||||
REPORT: True
|
REPORT: True
|
||||||
REPORT_INTERVAL: 60
|
REPORT_INTERVAL: 60
|
||||||
REPORT_PORT: 4321
|
REPORT_PORT: 4321
|
||||||
REPORT_CLIENTS: 127.0.0.1
|
REPORT_CLIENTS: 127.0.0.1
|
||||||
|
|
||||||
|
|
||||||
# SYSTEM LOGGER CONFIGURAITON
|
|
||||||
# This allows the logger to be configured without chaning the individual
|
|
||||||
# python logger stuff. LOG_FILE should be a complete path/filename for *your*
|
|
||||||
# system -- use /dev/null for non-file handlers.
|
|
||||||
# LOG_HANDLERS may be any of the following, please, no spaces in the
|
|
||||||
# list if you use several:
|
|
||||||
# null
|
|
||||||
# console
|
|
||||||
# console-timed
|
|
||||||
# file
|
|
||||||
# file-timed
|
|
||||||
# syslog
|
|
||||||
# LOG_LEVEL may be any of the standard syslog logging levels, though
|
|
||||||
# as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones
|
|
||||||
# used.
|
|
||||||
#
|
|
||||||
[LOGGER]
|
[LOGGER]
|
||||||
LOG_FILE: /tmp/hblink.log
|
LOG_FILE: freedmr.log
|
||||||
LOG_HANDLERS: console-timed
|
LOG_HANDLERS: file-timed
|
||||||
LOG_LEVEL: DEBUG
|
LOG_LEVEL: INFO
|
||||||
LOG_NAME: HBlink
|
LOG_NAME: FreeDMR
|
||||||
|
|
||||||
# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES
|
|
||||||
# Ok, not the TGID, there's no master list I know of to download
|
|
||||||
# This is intended as a facility for other applcations built on top of
|
|
||||||
# HBlink to use, and will NOT be used in HBlink directly.
|
|
||||||
# STALE_DAYS is the number of days since the last download before we
|
|
||||||
# download again. Don't be an ass and change this to less than a few days.
|
|
||||||
[ALIASES]
|
[ALIASES]
|
||||||
TRY_DOWNLOAD: True
|
TRY_DOWNLOAD: True
|
||||||
PATH: ./
|
PATH: ./
|
||||||
@ -109,7 +33,6 @@ PEER_URL: https://www.radioid.net/static/rptrs.json
|
|||||||
SUBSCRIBER_URL: https://www.radioid.net/static/users.json
|
SUBSCRIBER_URL: https://www.radioid.net/static/users.json
|
||||||
STALE_DAYS: 7
|
STALE_DAYS: 7
|
||||||
|
|
||||||
#Read further repeater configs from MySQL
|
|
||||||
[MYSQL]
|
[MYSQL]
|
||||||
USE_MYSQL: False
|
USE_MYSQL: False
|
||||||
USER: hblink
|
USER: hblink
|
||||||
@ -119,23 +42,6 @@ SERVER: 127.0.0.1
|
|||||||
PORT: 3306
|
PORT: 3306
|
||||||
TABLE: repeaters
|
TABLE: repeaters
|
||||||
|
|
||||||
# OPENBRIDGE INSTANCES - DUPLICATE SECTION FOR MULTIPLE CONNECTIONS
|
|
||||||
# OpenBridge is a protocol originall created by DMR+ for connection between an
|
|
||||||
# IPSC2 server and Brandmeister. It has been implemented here at the suggestion
|
|
||||||
# of the Brandmeister team as a way to legitimately connect HBlink to the
|
|
||||||
# Brandemiester network.
|
|
||||||
# It is recommended to name the system the ID of the Brandmeister server that
|
|
||||||
# it connects to, but is not necessary. TARGET_IP and TARGET_PORT are of the
|
|
||||||
# Brandmeister or IPSC2 server you are connecting to. PASSPHRASE is the password
|
|
||||||
# that must be agreed upon between you and the operator of the server you are
|
|
||||||
# connecting to. NETWORK_ID is a number in the format of a DMR Radio ID that
|
|
||||||
# will be sent to the other server to identify this connection.
|
|
||||||
# other parameters follow the other system types.
|
|
||||||
#
|
|
||||||
# ACLs:
|
|
||||||
# OpenBridge does not 'register', so registration ACL is meaningless.
|
|
||||||
# OpenBridge passes all traffic on TS1, so there is only 1 TGID ACL.
|
|
||||||
# Otherwise ACLs work as described in the global stanza
|
|
||||||
[OBP-TEST]
|
[OBP-TEST]
|
||||||
MODE: OPENBRIDGE
|
MODE: OPENBRIDGE
|
||||||
ENABLED: False
|
ENABLED: False
|
||||||
@ -148,41 +54,28 @@ TARGET_PORT: 62044
|
|||||||
USE_ACL: True
|
USE_ACL: True
|
||||||
SUB_ACL: DENY:1
|
SUB_ACL: DENY:1
|
||||||
TGID_ACL: PERMIT:ALL
|
TGID_ACL: PERMIT:ALL
|
||||||
RELAX_CHECKS: False
|
RELAX_CHECKS: True
|
||||||
ENHANCED_OBP: False
|
ENHANCED_OBP: True
|
||||||
|
|
||||||
# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS
|
[SYSTEM]
|
||||||
# HomeBrew Protocol Master instances go here.
|
|
||||||
# IP may be left blank if there's one interface on your system.
|
|
||||||
# Port should be the port you want this master to listen on. It must be unique
|
|
||||||
# and unused by anything else.
|
|
||||||
# Repeat - if True, the master repeats traffic to peers, False, it does nothing.
|
|
||||||
#
|
|
||||||
# MAX_PEERS -- maximun number of peers that may be connect to this master
|
|
||||||
# at any given time. This is very handy if you're allowing hotspots to
|
|
||||||
# connect, or using a limited computer like a Raspberry Pi.
|
|
||||||
#
|
|
||||||
# ACLs:
|
|
||||||
# See comments in the GLOBAL stanza
|
|
||||||
[G9XYZ]
|
|
||||||
MODE: MASTER
|
MODE: MASTER
|
||||||
ENABLED: False
|
ENABLED: True
|
||||||
REPEAT: True
|
REPEAT: True
|
||||||
MAX_PEERS: 1
|
MAX_PEERS: 1
|
||||||
EXPORT_AMBE: False
|
EXPORT_AMBE: False
|
||||||
IP:
|
IP: 127.0.0.1
|
||||||
PORT: 54001
|
PORT: 54000
|
||||||
PASSPHRASE: passw0rd
|
PASSPHRASE:
|
||||||
GROUP_HANGTIME: 5
|
GROUP_HANGTIME: 5
|
||||||
USE_ACL: True
|
USE_ACL: True
|
||||||
REG_ACL: DENY:1
|
REG_ACL: DENY:1
|
||||||
SUB_ACL: DENY:1
|
SUB_ACL: DENY:1
|
||||||
TGID_TS1_ACL: PERMIT:ALL
|
TGID_TS1_ACL: PERMIT:ALL
|
||||||
TGID_TS2_ACL: PERMIT:ALL
|
TGID_TS2_ACL: PERMIT:ALL
|
||||||
DEFAULT_UA_TIMER: 10
|
DEFAULT_UA_TIMER: 60
|
||||||
SINGLE_MODE: True
|
SINGLE_MODE: True
|
||||||
VOICE_IDENT: True
|
VOICE_IDENT: True
|
||||||
TS1_STATIC:
|
TS1_STATIC:
|
||||||
TS2_STATIC:
|
TS2_STATIC:
|
||||||
DEFAULT_REFLECTOR: 0
|
DEFAULT_REFLECTOR: 0
|
||||||
GENERATOR: 1
|
GENERATOR: 100
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user