ambed-debian-installer/ambe-debian-installer

120 lines
5.1 KiB
Plaintext
Raw Normal View History

#!/bin/bash
#A tool to install AMBE server.
#This is essentially a scripted version of:
#https://github.com/LX3JL/xlxd/blob/master/ambed/readme
#Step 1: Install Debian 9.x and make sure it has internet and is up to date.
#Step 2: Plug AMBE Chip(s) into computer.
#Step 3: Run this script on the computer with the ambe chips.
#Step 4: Reboot after installation.
# systemctl status ambed #to show the status
# systemctl stop ambed #to stop ambed
# systemctl start ambed #to start ambed
# ambed logs are part of /var/log/messages
#Lets begin-------------------------------------------------------------------------------------------------
WHO=$(whoami)
if [ "$WHO" != "root" ];
then
echo ""
echo "You Must be root to run this script!!"
exit 0
fi
if [ ! -e "/etc/debian_version" ]
then
echo ""
echo "This script is only tested in Debian 8,9 and x64 cpu Arch. for now."
exit 0
fi
DIRDIR=$(pwd)
LOCAL_IP=$(ip a | grep inet | grep "eth0\|en" | awk '{print $2}' | tr '/' ' ' | awk '{print $1}')
ARC=$(lscpu | grep Arch | awk '{print $2}')
X64=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-x86_64-1.4.6.tgz
X32=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-i386-1.4.6.tgz
2021-01-16 22:11:02 -05:00
ARM=https://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-arm-v7-hf-1.4.22.tgz
2018-12-17 20:08:01 -05:00
AMBINSTDIR=/root/reflector-install-files/ambed
DEP="wget git build-essential"
GITREPO=https://github.com/LX3JL/xlxd.git
echo "------------------------------------------------------------------------------"
2018-12-17 20:08:01 -05:00
echo " Installing required software..."
echo "------------------------------------------------------------------------------"
apt-get -y install $DEP
mkdir -p /ambed
2018-12-17 20:08:01 -05:00
mkdir -p $AMBINSTDIR
if [ ! -e /usr/local/lib/libftd2xx.so ]
then
echo ""
echo "------------------------------------------------------------------------------"
2018-12-17 20:08:01 -05:00
echo "Downloading and installing FTDI driver...."
echo "------------------------------------------------------------------------------"
cd $AMBINSTDIR
2021-01-16 22:11:02 -05:00
if [ $ARC = x86_64 ]
then
wget $X64
tar xfvz libftd2xx-x86_64-1.4.6.tgz
cd release/build
cp libftd2xx.* /usr/local/lib
chmod 0755 /usr/local/lib/libftd2xx.so.1.4.6
ln -sf /usr/local/lib/libftd2xx.so.1.4.6 /usr/local/lib/libftd2xx.so
2021-01-16 22:11:02 -05:00
elif [ $ARC = armv71 ]
then
wget $ARM
tar libftd2xx-arm-v7-hf-1.4.22.tgz
cd release/build
cp libftd2xx.* /usr/local/lib
chmod 0755 /usr/local/lib/libftd2xx.so.1.4.22
ln -sf /usr/local/lib/libftd2xx.so.1.4.22 /usr/local/lib/libftd2xx.so
2021-01-16 22:34:50 -05:00
elif [ $ARC = i686 ]
2021-01-16 22:11:02 -05:00
then
wget $X32
tar xfvz libftd2xx-i386-1.4.6.tgz
cd release/build
cp libftd2xx.* /usr/local/lib
chmod 0755 /usr/local/lib/libftd2xx.so.1.4.6
2021-01-16 22:34:50 -05:00
ln -sf /usr/local/lib/libftd2xx.so.1.4.6 /usr/local/lib/libftd2xx.so
fi
else
echo "------------------------------------------------------------------------------"
echo "It looks like the driver is already installed. If this is wrong, see what '/usr/local/lib/libftd2xx.so' is up to. Skipping FTDI Driver install. "
fi
echo "------------------------------------------------------------------------------"
2018-12-17 20:08:01 -05:00
echo "Downloading and installing AMBED..."
echo "------------------------------------------------------------------------------"
2018-12-17 20:08:01 -05:00
cd $AMBINSTDIR
git clone $GITREPO
cd $AMBINSTDIR/xlxd/ambed/
make clean
make
make install
if [ -e ambed ]
then
2018-12-17 20:08:01 -05:00
echo "------------------------------------------------------------------------------"
echo "It looks like everything compiled successfully. There is an 'ambed' application file. "
2018-12-17 20:08:01 -05:00
echo "------------------------------------------------------------------------------"
else
2018-12-17 20:08:01 -05:00
echo "------------------------------------------------------------------------------"
echo "I dont see an AMBED file after compiling. Look at the errors above and try again. Exiting....."
echo "------------------------------------------------------------------------------"
exit 0
fi
2018-12-17 20:08:01 -05:00
echo ""
echo ""
echo "------------------------------------------------------------------------------"
echo "Copying ambed files and systemd files... "
2018-12-17 20:08:01 -05:00
echo "------------------------------------------------------------------------------"
cp ambed /ambed
cp $DIRDIR/templates/ambed.service /etc/systemd/system/
sed -i "s/LOCAL-IP/$LOCAL_IP/g" /etc/systemd/system/ambed.service
systemctl daemon-reload
echo ""
echo ""
echo "************************************************************************"
echo ""
echo ""
echo " The install is complete. "
2018-12-17 20:08:01 -05:00
echo " ******* Now reboot the server. ******* "
echo " Use 'systemctl status ambed' to check the status. "
echo " ambed logs are part of /var/log/messages. "
2018-12-17 20:08:01 -05:00
echo " Just make sure this computer can be accessed over UDP 10100 "
echo ""
echo ""
echo "************************************************************************"