added systemc unit file and cleaned script up

ambe-debian-installer

@@ -2,20 +2,14 @@
 #A tool to install AMBE server.
 #This is essentially a scripted version of:
 #https://github.com/LX3JL/xlxd/blob/master/ambed/readme
-#Step 1: Install Debian 8 or 9 and make sure it has internet and is up to date.
+#Step 1: Install Debian 9.x and make sure it has internet and is up to date.
 #Step 2: Plug AMBE Chip(s) into computer.
 #Step 3: Run this script on the computer with the ambe chips.
-#Step 4: Reboot
+#Step 4: Reboot after installation.
-#Step 5: Execute /ambed/run
+# systemctl status ambed #to show the status
-#"To start your AMBE server manually, start a screen session. Just type 'screen' "
+# systemctl stop ambed #to stop ambed
-#"cd /ambe "
+# systemctl start ambed #to start ambed
-#"./run "
+# ambed logs are part of /var/log/messages
-#"Leave screen session running"
-#
-#"To stop AMBE...."
-#"ps aux | grep ambe"
-#"kill <THE PID #>,Thats the official step for now"
-
 #Lets begin-------------------------------------------------------------------------------------------------
 WHO=$(whoami)
 #Have to be ROOT to run this script
@@ -31,11 +25,11 @@ if [ ! -e "/etc/debian_version" ]
 then
   echo ""
   echo "This script is only tested in Debian 8,9 and x64 cpu Arch. for now."
-  #echo "This script is only tested in Debian 8,9 and Raspian Stretch for now."
   exit 0
 fi
 
 #Gather variables
+DIRDIR=$(pwd)
 LOCAL_IP=$(ip a | grep inet | grep "eth0\|en" | awk '{print $2}' | tr '/' ' ' | awk '{print $1}')
 ARC=$(lscpu | grep Arch | awk '{print $2}')
 X64=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-x86_64-1.4.6.tgz
@@ -43,7 +37,7 @@ X32=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-i386-1.4.6.tgz
 #ARM=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-arm-v7-hf-1.4.8.gz
 
 #Install dependicies
-echo ""
+echo "------------------------------------------------------------------------------"
 echo "Installing required software..."
 apt-get -y install wget
 apt-get -y install git
@@ -54,12 +48,13 @@ apt-get -y install build-essential
 
 #Make Directories and get the FTDI driver.
 mkdir -p /ambed
-mkdir -p /root/ambed-install-files
+mkdir -p /root/reflector-install-files/ambed
 if [ ! -e /usr/local/lib/libftd2xx.so ]
 then
   echo ""
+        echo "------------------------------------------------------------------------------"
         echo "Downloading driver and installing it....."
-        cd /root/ambed-install-files
+        cd /root/reflector-install-files/ambed
         if [ "$ARC" = "x86_64" ]
         then
                 wget $X64
@@ -77,18 +72,18 @@ then
                 ln -sf /usr/local/lib/libftd2xx.so.1.4.6 /usr/local/lib/libftd2xx.so
         fi
 else
-        echo ""
+        echo "------------------------------------------------------------------------------"
         echo "It looks like the driver is already installed. If this is wrong, see what '/usr/local/lib/libftd2xx.so' is up to. Skipping FTDI Driver install. "
 fi
 
 #Time to get the xlx/ambe software from git
-echo ""
+echo "------------------------------------------------------------------------------"
 echo "Getting xlx/ambed from github..."
-cd /root/ambed-install-files
+cd /root/reflector-install-files/ambed
 git clone https://github.com/LX3JL/xlxd.git
-echo ""
+echo "------------------------------------------------------------------------------"
 echo "Installing ambed....."
-cd xlxd/ambed/
+cd /root/reflector-install-files/ambed/xlxd/ambed/
 make clean
 make
 make install
@@ -99,30 +94,22 @@ then
         echo "/ambe directory exists already, I dont need to add it."
         exit 0
 fi
+echo "------------------------------------------------------------------------------"
+echo "Copying ambed files and systemd files... "
 cp ambed /ambed
-cp run /ambed
+cp $DIRDIR/templates/ambed.service /etc/systemd/system/
-chmod 755 /ambed/run
+sed -i "s/LOCAL-IP/$LOCAL_IP/g" /etc/systemd/system/ambed.service
-sed -i "s/127.0.0.1/$LOCAL_IP/g" /ambed/run
+systemctl daemon-reload
-sed -i "s/sudo//g" /ambed/run
-
 #That should be it for the install.
-echo "************************************************************************"
-echo ""
-echo ""
-echo "To start your AMBE Server, start a screen session. Just type 'screen' "
-echo "cd /ambe "
-echo "./run "
-echo "Leave screen session running"
-echo ""
-echo ""
-echo "To stop AMBE...."
-echo "ps aux | grep ambe"
-echo "kill <THE PID #>"
 echo ""
 echo ""
 echo "************************************************************************"
 echo ""
 echo ""
-echo "After reading the above, reboot the server and you should be ready to start ambeD :) "
+echo "                   The install is complete.                             "
+echo "                     Now reboot the server.                             "
+echo "         Use 'systemctl status ambed' to check the status.              "
+echo "            ambed logs are part of /var/log/messages.                   "
 echo ""
 echo ""
+echo "************************************************************************"

templates/ambed.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=AMBED
+
+[Service]
+Type=simple
+ExecStartPre=-/sbin/rmmod ftdi_sio
+ExecStartPre=-/sbin/rmmod usbserial 
+ExecStart=/ambed/ambed LOCAL-IP
+
+[Install]
+WantedBy=multi-user.target
+Alias=xlxd.service