#!/bin/bash
#A tool to install AMBE server.
#This is essentially a scripted version of:
#https://github.com/LX3JL/xlxd/blob/master/ambed/readme
#Step 1: Install Debian 8, 9 & 10 and make sure it has internet and is up to date.
#Step 2: Plug AMBE Chip(s) into computer.
#Step 3: Run this script on the computer with the ambe chips.
#Step 4: Reboot after installation.
# systemctl status ambed #to show the status
# systemctl stop ambed #to stop ambed
# systemctl start ambed #to start ambed
# ambed logs are part of /var/log/messages
#Lets begin-------------------------------------------------------------------------------------------------
if [ "$EUID" -ne 0 ];
then
  echo ""
  echo "You Must be root to run this script!!"
  exit 0
fi
if [ ! -e "/etc/debian_version" ]
then
  echo ""
  echo "This script is only tested in Debian 8,9,10. for now."
  exit 0
fi
DIRDIR=$(pwd)
LOCAL_IP=$(ip a | grep inet | grep "eth0\|en" | awk '{print $2}' | tr '/' ' ' | awk '{print $1}')
ARC=$(lscpu | grep Arch | awk '{print $2}')
X64=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-x86_64-1.4.6.tgz
X32=http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-i386-1.4.6.tgz
ARM=https://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-arm-v7-hf-1.4.22.tgz
AMBINSTDIR=/root/reflector-install-files/ambed
DEP="wget git g++ build-essential"
GITREPO=https://github.com/LX3JL/xlxd.git
echo "------------------------------------------------------------------------------"
echo " Installing required software..."
echo "------------------------------------------------------------------------------"
apt-get -y install $DEP
mkdir -p /ambed
mkdir -p $AMBINSTDIR
if [ ! -e /usr/local/lib/libftd2xx.so ]
then
  echo ""
        echo "------------------------------------------------------------------------------"
        echo "Downloading and installing FTDI driver...."
        echo "------------------------------------------------------------------------------"
        cd $AMBINSTDIR
        if [ "$ARC" = "x86_64" ];
        then
                wget $X64
                tar xfvz libftd2xx-x86_64-1.4.6.tgz
                cd release/build
                cp libftd2xx.* /usr/local/lib
                chmod 0755 /usr/local/lib/libftd2xx.so.1.4.6
                ln -sf /usr/local/lib/libftd2xx.so.1.4.6 /usr/local/lib/libftd2xx.so
        elif [ "$ARC" = "armv7l" ];
        then
                wget $ARM
                tar zxf libftd2xx-arm-v7-hf-1.4.22.tgz
                cd release/build
                cp libftd2xx.* /usr/local/lib
                chmod 0755 /usr/local/lib/libftd2xx.so.1.4.22
                ln -sf /usr/local/lib/libftd2xx.so.1.4.22 /usr/local/lib/libftd2xx.so
        elif [ "$ARC" = "i686" ];
        then
                wget $X32
                tar xfvz libftd2xx-i386-1.4.6.tgz
                cd release/build
                cp libftd2xx.* /usr/local/lib
                chmod 0755 /usr/local/lib/libftd2xx.so.1.4.6
                ln -sf /usr/local/lib/libftd2xx.so.1.4.6 /usr/local/lib/libftd2xx.so
        fi
else
        echo "------------------------------------------------------------------------------"
        echo "It looks like the driver is already installed. If this is wrong, see what '/usr/local/lib/libftd2xx.so' is up to. Skipping FTDI Driver install. "
fi
echo "------------------------------------------------------------------------------"
echo "Downloading and installing AMBED..."
echo "------------------------------------------------------------------------------"
cd $AMBINSTDIR
git clone $GITREPO
cd $AMBINSTDIR/xlxd/ambed/
make clean
make
make install
if [ -e ambed ]
then
        echo "------------------------------------------------------------------------------"
        echo "It looks like everything compiled successfully. There is an 'ambed' application file. "
        echo "------------------------------------------------------------------------------"
        else
        echo "------------------------------------------------------------------------------"
        echo "I dont see an AMBEd file after compiling. Look at the errors above and try again. Exiting....."
        echo "------------------------------------------------------------------------------"
        exit 0
fi
echo ""
echo ""
echo "------------------------------------------------------------------------------"
echo "Copying ambed files and systemd files... "
echo "------------------------------------------------------------------------------"
cp ambed /ambed
cp $DIRDIR/templates/ambed.service /etc/systemd/system/
sed -i "s/LOCAL-IP/$LOCAL_IP/g" /etc/systemd/system/ambed.service
systemctl daemon-reload
systemctl enable ambed
echo ""
echo ""
echo "************************************************************************"
echo ""
echo ""
echo "                   The install is complete.                             "
echo "              ******* Now reboot the server. *******                    "
echo "         Use 'systemctl status ambed' to check the status.              "
echo "            ambed logs are part of /var/log/messages.                   "
echo "      Just make sure this computer can be accessed over UDP 10100       "
echo ""
echo ""
echo "************************************************************************"