diff --git a/bridge_gps_data-SAMPLE.cfg b/bridge_gps_data-SAMPLE.cfg
new file mode 100644
index 0000000..aba7999
--- /dev/null
+++ b/bridge_gps_data-SAMPLE.cfg
@@ -0,0 +1,329 @@
+# PROGRAM-WIDE PARAMETERS GO HERE
+# PATH - working path for files, leave it alone unless you NEED to change it
+# PING_TIME - the interval that peers will ping the master, and re-try registraion
+#           - how often the Master maintenance loop runs
+# MAX_MISSED - how many pings are missed before we give up and re-register
+#           - number of times the master maintenance loop runs before de-registering a peer
+#
+# ACLs:
+#
+# Access Control Lists are a very powerful tool for administering your system.
+# But they consume packet processing time. Disable them if you are not using them.
+# But be aware that, as of now, the configuration stanzas still need the ACL
+# sections configured even if you're not using them.
+#
+# REGISTRATION ACLS ARE ALWAYS USED, ONLY SUBSCRIBER AND TGID MAY BE DISABLED!!!
+#
+# The 'action' May be PERMIT|DENY
+# Each entry may be a single radio id, or a hypenated range (e.g. 1-2999)
+# Format:
+# 	ACL = 'action:id|start-end|,id|start-end,....'
+#		--for example--
+#	SUB_ACL: DENY:1,1000-2000,4500-60000,17
+#
+# ACL Types:
+# 	REG_ACL: peer radio IDs for registration (only used on HBP master systems)
+# 	SUB_ACL: subscriber IDs for end-users
+# 	TGID_TS1_ACL: destination talkgroup IDs on Timeslot 1
+# 	TGID_TS2_ACL: destination talkgroup IDs on Timeslot 2
+#
+# ACLs may be repeated for individual systems if needed for granularity
+# Global ACLs will be processed BEFORE the system level ACLs
+# Packets will be matched against all ACLs, GLOBAL first. If a packet 'passes'
+# All elements, processing continues. Packets are discarded at the first
+# negative match, or 'reject' from an ACL element.
+#
+# If you do not wish to use ACLs, set them to 'PERMIT:ALL'
+# TGID_TS1_ACL in the global stanza is used for OPENBRIDGE systems, since all
+# traffic is passed as TS 1 between OpenBridges
+[GLOBAL]
+PATH: ./
+PING_TIME: 5
+MAX_MISSED: 3
+USE_ACL: True
+REG_ACL: PERMIT:ALL
+SUB_ACL: DENY:1
+TGID_TS1_ACL: PERMIT:ALL
+TGID_TS2_ACL: PERMIT:ALL
+
+
+# NOT YET WORKING: NETWORK REPORTING CONFIGURATION
+#   Enabling "REPORT" will configure a socket-based reporting
+#   system that will send the configuration and other items
+#   to a another process (local or remote) that may process
+#   the information for some useful purpose, like a web dashboard.
+#
+#   REPORT - True to enable, False to disable
+#   REPORT_INTERVAL - Seconds between reports
+#   REPORT_PORT - TCP port to listen on if "REPORT_NETWORKS" = NETWORK
+#   REPORT_CLIENTS - comma separated list of IPs you will allow clients
+#       to connect on. Entering a * will allow all.
+#
+# ****FOR NOW MUST BE TRUE - USE THE LOOPBACK IF YOU DON'T USE THIS!!!****
+[REPORTS]
+REPORT: True
+REPORT_INTERVAL: 60
+REPORT_PORT: 4321
+REPORT_CLIENTS: 127.0.0.1
+
+
+# SYSTEM LOGGER CONFIGURAITON
+#   This allows the logger to be configured without chaning the individual
+#   python logger stuff. LOG_FILE should be a complete path/filename for *your*
+#   system -- use /dev/null for non-file handlers.
+#   LOG_HANDLERS may be any of the following, please, no spaces in the
+#   list if you use several:
+#       null
+#       console
+#       console-timed
+#       file
+#       file-timed
+#       syslog
+#   LOG_LEVEL may be any of the standard syslog logging levels, though
+#   as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones
+#   used.
+#
+[LOGGER]
+LOG_FILE: /tmp/hblink.log
+LOG_HANDLERS: console-timed
+LOG_LEVEL: DEBUG
+LOG_NAME: HBlink
+
+# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES
+# Ok, not the TGID, there's no master list I know of to download
+# This is intended as a facility for other applcations built on top of
+# HBlink to use, and will NOT be used in HBlink directly.
+# STALE_DAYS is the number of days since the last download before we
+# download again. Don't be an ass and change this to less than a few days.
+[ALIASES]
+TRY_DOWNLOAD: True
+PATH: ./
+PEER_FILE: peer_ids.json
+SUBSCRIBER_FILE: subscriber_ids.json
+TGID_FILE: talkgroup_ids.json
+PEER_URL: https://www.radioid.net/static/rptrs.json
+SUBSCRIBER_URL: https://www.radioid.net/static/users.json
+STALE_DAYS: 1
+
+# GPS/Data Application - by KF7EEL
+# Configure the settings for the DMR GPS to APRS position application here.
+#
+# DATA_DMR_ID - This is the DMR ID that users send DMR GPS data.
+# CALL_TYPE - group, unit, or both. Group if you want users to send data to a talkgroup,
+# unit if you want users to send data as a private call, or both if you want both options.
+# USER_APRS_SSID - Default APRS SSID assigned to user APRS positions.
+# USER_APRS_COMMENT - Default Comment attached to user APRS positions.
+# APRS_LOGIN_CALL, PASSCODE, SERVER, and PORT - Login settings for APRS-IS.
+[GPS_DATA]
+DATA_DMR_ID: 9099
+CALL_TYPE: both
+USER_APRS_SSID: 15
+USER_APRS_COMMENT: HBLink3 D-APRS -
+
+# Setting APRS_LOGIN_CALL to N0CALL will cause the gateway to not upload packets to APRS server.
+APRS_LOGIN_CALL: N0CALL
+APRS_LOGIN_PASSCODE: 12345
+APRS_SERVER: rotate.aprs2.net
+APRS_PORT: 14580
+
+# The following settings are only applicable if you are using the gps_data_beacon_igate script.
+# They do not affect the operation gps_data itself.
+# Time in minutes.
+IGATE_BEACON_TIME = 45
+IGATE_BEACON_COMMENT = HBLink3 D-APRS Gateway
+IGATE_BEACON_ICON = /I
+IGATE_LATITUDE = 0000.00N
+IGATE_LONGITUDE = 00000.00W
+
+# The email gateway settingns below are OPTIONAL. They are NOT REQUIRED if you don't want
+# to enable the email gateway. Leave as is to disable.
+EMAIL_SENDER: 
+EMAIL_PASSWORD: 
+SMTP_SERVER: smtp.gmail.com
+SMTP_PORT: 465
+
+# OPENBRIDGE INSTANCES - DUPLICATE SECTION FOR MULTIPLE CONNECTIONS
+# OpenBridge is a protocol originall created by DMR+ for connection between an
+# IPSC2 server and Brandmeister. It has been implemented here at the suggestion
+# of the Brandmeister team as a way to legitimately connect HBlink to the
+# Brandemiester network.
+# It is recommended to name the system the ID of the Brandmeister server that
+# it connects to, but is not necessary. TARGET_IP and TARGET_PORT are of the
+# Brandmeister or IPSC2 server you are connecting to. PASSPHRASE is the password
+# that must be agreed upon between you and the operator of the server you are
+# connecting to. NETWORK_ID is a number in the format of a DMR Radio ID that
+# will be sent to the other server to identify this connection.
+# other parameters follow the other system types.
+#
+# ACLs:
+# OpenBridge does not 'register', so registration ACL is meaningless.
+# Proper OpenBridge passes all traffic on TS1.
+# HBlink can extend OPB to use both slots for unit calls only.
+# Setting "BOTH_SLOTS" True ONLY affects unit traffic!
+# Otherwise ACLs work as described in the global stanza
+[OBP-1]
+MODE: OPENBRIDGE
+ENABLED: False
+IP:
+PORT: 62035
+NETWORK_ID: 3129100
+PASSPHRASE: password
+TARGET_IP: 1.2.3.4
+TARGET_PORT: 62035
+BOTH_SLOTS: True
+USE_ACL: True
+SUB_ACL: DENY:1
+TGID_ACL: PERMIT:ALL
+
+# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS
+# HomeBrew Protocol Master instances go here.
+# IP may be left blank if there's one interface on your system.
+# Port should be the port you want this master to listen on. It must be unique
+# and unused by anything else.
+# Repeat - if True, the master repeats traffic to peers, False, it does nothing.
+#
+# MAX_PEERS -- maximun number of peers that may be connect to this master
+# at any given time. This is very handy if you're allowing hotspots to
+# connect, or using a limited computer like a Raspberry Pi.
+#
+# ACLs:
+# See comments in the GLOBAL stanza
+[MASTER-1]
+MODE: MASTER
+ENABLED: True
+REPEAT: True
+MAX_PEERS: 10
+EXPORT_AMBE: False
+IP:
+PORT: 54000
+PASSPHRASE: s3cr37w0rd
+GROUP_HANGTIME: 5
+USE_ACL: True
+REG_ACL: DENY:1
+SUB_ACL: DENY:1
+TGID_TS1_ACL: PERMIT:ALL
+TGID_TS2_ACL: PERMIT:ALL
+
+[D-APRS]
+MODE: MASTER
+ENABLED: True
+REPEAT: True
+MAX_PEERS: 2
+EXPORT_AMBE: False
+IP:
+PORT: 54070
+PASSPHRASE: passw0rd
+GROUP_HANGTIME: 5
+USE_ACL: True
+REG_ACL: DENY:1
+SUB_ACL: DENY:1
+TGID_TS1_ACL: PERMIT:ALL
+TGID_TS2_ACL: PERMIT:ALL
+
+# PEER INSTANCES - DUPLICATE SECTION FOR MULTIPLE PEERS
+# There are a LOT of errors in the HB Protocol specifications on this one!
+# MOST of these items are just strings and will be properly dealt with by the program
+# The TX & RX Frequencies are 9-digit numbers, and are the frequency in Hz.
+# Latitude is an 8-digit unsigned floating point number.
+# Longitude is a 9-digit signed floating point number.
+# Height is in meters
+# Setting Loose to True relaxes the validation on packets received from the master.
+# This will allow HBlink to connect to a non-compliant system such as XLXD, DMR+ etc.
+#
+# ACLs:
+# See comments in the GLOBAL stanza
+[REPEATER-1]
+MODE: PEER
+ENABLED: False
+LOOSE: False
+EXPORT_AMBE: False
+IP: 
+PORT: 54001
+MASTER_IP: 172.16.1.1
+MASTER_PORT: 54000
+PASSPHRASE: homebrew
+CALLSIGN: W1ABC
+RADIO_ID: 312000
+RX_FREQ: 449000000
+TX_FREQ: 444000000
+TX_POWER: 25
+COLORCODE: 1
+SLOTS: 1
+LATITUDE: 38.0000
+LONGITUDE: -095.0000
+HEIGHT: 75
+LOCATION: Anywhere, USA
+DESCRIPTION: This is a cool repeater
+URL: www.w1abc.org
+SOFTWARE_ID: 20170620
+PACKAGE_ID: MMDVM_HBlink
+GROUP_HANGTIME: 5
+OPTIONS:
+USE_ACL: True
+SUB_ACL: DENY:1
+TGID_TS1_ACL: PERMIT:ALL
+TGID_TS2_ACL: PERMIT:ALL
+
+[ECHO]
+MODE: PEER
+ENABLED: True
+LOOSE: False
+EXPORT_AMBE: False
+IP: 
+PORT: 54073
+MASTER_IP: localhost
+MASTER_PORT: 54072
+passphrase: passw0rd
+CALLSIGN: ECHO
+RADIO_ID: 9999
+RX_FREQ: 000000000
+TX_FREQ: 000000000
+TX_POWER: 0
+COLORCODE: 1
+SLOTS: 1
+LATITUDE: 00.0000
+LONGITUDE: 000.0000
+HEIGHT: 0
+LOCATION: This Server
+DESCRIPTION: Echo Server
+URL: www.github.com/kf7eel/hblink3
+SOFTWARE_ID: 20170620
+PACKAGE_ID: MMDVM_HBlink
+GROUP_HANGTIME: 5
+OPTIONS:
+USE_ACL: True
+SUB_ACL: DENY:1
+TGID_TS1_ACL: PERMIT:ALL
+TGID_TS2_ACL: PERMIT:ALL
+
+[XLX-1]
+MODE: XLXPEER
+ENABLED: False
+LOOSE: True
+EXPORT_AMBE: False
+IP: 
+PORT: 54002
+MASTER_IP: 172.16.1.1
+MASTER_PORT: 62030
+PASSPHRASE: passw0rd
+CALLSIGN: W1ABC
+RADIO_ID: 312000
+RX_FREQ: 449000000
+TX_FREQ: 444000000
+TX_POWER: 25
+COLORCODE: 1
+SLOTS: 1
+LATITUDE: 38.0000
+LONGITUDE: -095.0000
+HEIGHT: 75
+LOCATION: Anywhere, USA
+DESCRIPTION: This is a cool repeater
+URL: www.w1abc.org
+SOFTWARE_ID: 20170620
+PACKAGE_ID: MMDVM_HBlink
+GROUP_HANGTIME: 5
+XLXMODULE: 4004
+USE_ACL: True
+SUB_ACL: DENY:1
+TGID_TS1_ACL: PERMIT:ALL
+TGID_TS2_ACL: PERMIT:ALL