add SMS capture
This commit is contained in:
KF7EEL
parent
11a296252d
commit
979fedb218
335
full_bridge.py
335
full_bridge.py
@ -112,7 +112,7 @@ __copyright__ = 'Copyright (c) 2016-2019 Cortney T. Buffington, N0MJS and the K
|
||||
__credits__ = 'Colin Durbridge, G4EML, Steve Zingman, N4IRS; Mike Zingman, N4IRR; Jonathan Naylor, G4KLX; Hans Barthen, DL5DI; Torsten Shultze, DG1HT, Xavier FRS2013'
|
||||
__license__ = 'GNU GPLv3'
|
||||
__maintainer__ = 'Eric Craw, KF7EEL'
|
||||
__email__ = 'n0mjs@me.com'
|
||||
__email__ = 'kf7eel@qsl.net'
|
||||
|
||||
# Module gobal varaibles
|
||||
|
||||
@ -206,6 +206,18 @@ def dashboard_bb_write(call, dmr_id, time, bulletin):
|
||||
logger.info('User bulletin entry saved.')
|
||||
#logger.info(dash_bb)
|
||||
|
||||
def dashboard_sms_write(snd_call, rcv_call, rcv_dmr_id, snd_dmr_id, sms, time):
|
||||
#try:
|
||||
dash_sms = ast.literal_eval(os.popen('cat ' + sms_file).read())
|
||||
# except:
|
||||
# dash_entries = []
|
||||
dash_sms.insert(0, {'snd_call': snd_call, 'rcv_call':rcv_call, 'snd_dmr_id': snd_dmr_id, 'rcv_dmr_id':rcv_dmr_id, 'time': time, 'sms':sms})
|
||||
with open(sms_file, 'w') as user_sms_file:
|
||||
user_sms_file.write(str(dash_sms[:25]))
|
||||
user_sms_file.close()
|
||||
logger.info('User SMS entry saved.')
|
||||
|
||||
|
||||
def mailbox_write(call, dmr_id, time, message, recipient):
|
||||
#try:
|
||||
mail_file = ast.literal_eval(os.popen('cat ' + the_mailbox_file).read())
|
||||
@ -2343,80 +2355,81 @@ class routerHBP(HBSYSTEM):
|
||||
#logger.info(_rf_src)
|
||||
#logger.info((ba2num(bptc_decode(_data)[8:12])))
|
||||
################################################################3###### CHNGED #########
|
||||
if int_id(_dst_id) == data_id:
|
||||
## if int_id(_dst_id) == data_id:
|
||||
#logger.info(type(_seq))
|
||||
if type(_seq) is bytes:
|
||||
pckt_seq = int.from_bytes(_seq, 'big')
|
||||
else:
|
||||
pckt_seq = _seq
|
||||
# Try to classify header
|
||||
# UDT header has DPF of 0101, which is 5.
|
||||
# If 5 is at position 3, then this should be a UDT header for MD-380 type radios.
|
||||
# Coordinates are usually in the very next block after the header, we will discard the rest.
|
||||
#logger.info(ahex(bptc_decode(_data)[0:10]))
|
||||
if _call_type == call_type and header_ID(_data)[3] == '5' and ba2num(bptc_decode(_data)[69:72]) == 0 and ba2num(bptc_decode(_data)[8:12]) == 0 or (_call_type == 'vcsbk' and header_ID(_data)[3] == '5' and ba2num(bptc_decode(_data)[69:72]) == 0 and ba2num(bptc_decode(_data)[8:12]) == 0):
|
||||
global udt_block
|
||||
logger.info('MD-380 type UDT header detected. Very next packet should be location.')
|
||||
hdr_type = '380'
|
||||
if _dtype_vseq == 6 and hdr_type == '380' or _dtype_vseq == 'group' and hdr_type == '380':
|
||||
udt_block = 1
|
||||
if _dtype_vseq == 7 and hdr_type == '380':
|
||||
udt_block = udt_block - 1
|
||||
if udt_block == 0:
|
||||
logger.info('MD-380 type packet. This should contain the GPS location.')
|
||||
logger.info('Packet: ' + str(ahex(bptc_decode(_data))))
|
||||
if ba2num(bptc_decode(_data)[1:2]) == 1:
|
||||
lat_dir = 'N'
|
||||
if ba2num(bptc_decode(_data)[1:2]) == 0:
|
||||
lat_dir = 'S'
|
||||
if ba2num(bptc_decode(_data)[2:3]) == 1:
|
||||
lon_dir = 'E'
|
||||
if ba2num(bptc_decode(_data)[2:3]) == 0:
|
||||
lon_dir = 'W'
|
||||
lat_deg = ba2num(bptc_decode(_data)[11:18])
|
||||
lon_deg = ba2num(bptc_decode(_data)[38:46])
|
||||
lat_min = ba2num(bptc_decode(_data)[18:24])
|
||||
lon_min = ba2num(bptc_decode(_data)[46:52])
|
||||
lat_min_dec = str(ba2num(bptc_decode(_data)[24:38])).zfill(4)
|
||||
lon_min_dec = str(ba2num(bptc_decode(_data)[52:66])).zfill(4)
|
||||
# Old MD-380 coordinate format, keep here until new is confirmed working.
|
||||
#aprs_lat = str(str(lat_deg) + str(lat_min) + '.' + str(lat_min_dec)[0:2]).zfill(7) + lat_dir
|
||||
#aprs_lon = str(str(lon_deg) + str(lon_min) + '.' + str(lon_min_dec)[0:2]).zfill(8) + lon_dir
|
||||
# Fix for MD-380 by G7HIF
|
||||
aprs_lat = str(str(lat_deg) + str(lat_min).zfill(2) + '.' + str(lat_min_dec)[0:2]).zfill(7) + lat_dir
|
||||
aprs_lon = str(str(lon_deg) + str(lon_min).zfill(2) + '.' + str(lon_min_dec)[0:2]).zfill(8) + lon_dir
|
||||
if type(_seq) is bytes:
|
||||
pckt_seq = int.from_bytes(_seq, 'big')
|
||||
else:
|
||||
pckt_seq = _seq
|
||||
# Try to classify header
|
||||
# UDT header has DPF of 0101, which is 5.
|
||||
# If 5 is at position 3, then this should be a UDT header for MD-380 type radios.
|
||||
# Coordinates are usually in the very next block after the header, we will discard the rest.
|
||||
#logger.info(ahex(bptc_decode(_data)[0:10]))
|
||||
if _call_type == call_type and header_ID(_data)[3] == '5' and ba2num(bptc_decode(_data)[69:72]) == 0 and ba2num(bptc_decode(_data)[8:12]) == 0 or (_call_type == 'vcsbk' and header_ID(_data)[3] == '5' and ba2num(bptc_decode(_data)[69:72]) == 0 and ba2num(bptc_decode(_data)[8:12]) == 0):
|
||||
global udt_block
|
||||
logger.info('MD-380 type UDT header detected. Very next packet should be location.')
|
||||
hdr_type = '380'
|
||||
if _dtype_vseq == 6 and hdr_type == '380' or _dtype_vseq == 'group' and hdr_type == '380':
|
||||
udt_block = 1
|
||||
if _dtype_vseq == 7 and hdr_type == '380':
|
||||
udt_block = udt_block - 1
|
||||
if udt_block == 0:
|
||||
logger.info('MD-380 type packet. This should contain the GPS location.')
|
||||
logger.info('Packet: ' + str(ahex(bptc_decode(_data))))
|
||||
if ba2num(bptc_decode(_data)[1:2]) == 1:
|
||||
lat_dir = 'N'
|
||||
if ba2num(bptc_decode(_data)[1:2]) == 0:
|
||||
lat_dir = 'S'
|
||||
if ba2num(bptc_decode(_data)[2:3]) == 1:
|
||||
lon_dir = 'E'
|
||||
if ba2num(bptc_decode(_data)[2:3]) == 0:
|
||||
lon_dir = 'W'
|
||||
lat_deg = ba2num(bptc_decode(_data)[11:18])
|
||||
lon_deg = ba2num(bptc_decode(_data)[38:46])
|
||||
lat_min = ba2num(bptc_decode(_data)[18:24])
|
||||
lon_min = ba2num(bptc_decode(_data)[46:52])
|
||||
lat_min_dec = str(ba2num(bptc_decode(_data)[24:38])).zfill(4)
|
||||
lon_min_dec = str(ba2num(bptc_decode(_data)[52:66])).zfill(4)
|
||||
# Old MD-380 coordinate format, keep here until new is confirmed working.
|
||||
#aprs_lat = str(str(lat_deg) + str(lat_min) + '.' + str(lat_min_dec)[0:2]).zfill(7) + lat_dir
|
||||
#aprs_lon = str(str(lon_deg) + str(lon_min) + '.' + str(lon_min_dec)[0:2]).zfill(8) + lon_dir
|
||||
# Fix for MD-380 by G7HIF
|
||||
aprs_lat = str(str(lat_deg) + str(lat_min).zfill(2) + '.' + str(lat_min_dec)[0:2]).zfill(7) + lat_dir
|
||||
aprs_lon = str(str(lon_deg) + str(lon_min).zfill(2) + '.' + str(lon_min_dec)[0:2]).zfill(8) + lon_dir
|
||||
|
||||
# Form APRS packet
|
||||
#logger.info(aprs_loc_packet)
|
||||
logger.info('Lat: ' + str(aprs_lat) + ' Lon: ' + str(aprs_lon))
|
||||
# 14FRS2013 simplified and moved settings retrieval
|
||||
user_settings = ast.literal_eval(os.popen('cat ' + user_settings_file).read())
|
||||
if int_id(_rf_src) not in user_settings:
|
||||
ssid = str(user_ssid)
|
||||
# Form APRS packet
|
||||
#logger.info(aprs_loc_packet)
|
||||
logger.info('Lat: ' + str(aprs_lat) + ' Lon: ' + str(aprs_lon))
|
||||
# 14FRS2013 simplified and moved settings retrieval
|
||||
user_settings = ast.literal_eval(os.popen('cat ' + user_settings_file).read())
|
||||
if int_id(_rf_src) not in user_settings:
|
||||
ssid = str(user_ssid)
|
||||
icon_table = '/'
|
||||
icon_icon = '['
|
||||
comment = aprs_comment + ' DMR ID: ' + str(int_id(_rf_src))
|
||||
else:
|
||||
if user_settings[int_id(_rf_src)][1]['ssid'] == '':
|
||||
ssid = user_ssid
|
||||
if user_settings[int_id(_rf_src)][3]['comment'] == '':
|
||||
comment = aprs_comment + ' DMR ID: ' + str(int_id(_rf_src))
|
||||
if user_settings[int_id(_rf_src)][2]['icon'] == '':
|
||||
icon_table = '/'
|
||||
icon_icon = '['
|
||||
comment = aprs_comment + ' DMR ID: ' + str(int_id(_rf_src))
|
||||
else:
|
||||
if user_settings[int_id(_rf_src)][1]['ssid'] == '':
|
||||
ssid = user_ssid
|
||||
if user_settings[int_id(_rf_src)][3]['comment'] == '':
|
||||
comment = aprs_comment + ' DMR ID: ' + str(int_id(_rf_src))
|
||||
if user_settings[int_id(_rf_src)][2]['icon'] == '':
|
||||
icon_table = '/'
|
||||
icon_icon = '['
|
||||
if user_settings[int_id(_rf_src)][2]['icon'] != '':
|
||||
icon_table = user_settings[int_id(_rf_src)][2]['icon'][0]
|
||||
icon_icon = user_settings[int_id(_rf_src)][2]['icon'][1]
|
||||
if user_settings[int_id(_rf_src)][1]['ssid'] != '':
|
||||
ssid = user_settings[int_id(_rf_src)][1]['ssid']
|
||||
if user_settings[int_id(_rf_src)][3]['comment'] != '':
|
||||
comment = user_settings[int_id(_rf_src)][3]['comment']
|
||||
aprs_loc_packet = str(get_alias(int_id(_rf_src), subscriber_ids)) + '-' + ssid + '>APHBL3,TCPIP*:@' + str(datetime.datetime.utcnow().strftime("%H%M%Sh")) + str(aprs_lat) + icon_table + str(aprs_lon) + icon_icon + '/' + str(comment)
|
||||
logger.info(aprs_loc_packet)
|
||||
logger.info('User comment: ' + comment)
|
||||
logger.info('User SSID: ' + ssid)
|
||||
logger.info('User icon: ' + icon_table + icon_icon)
|
||||
# Attempt to prevent malformed packets from being uploaded.
|
||||
if user_settings[int_id(_rf_src)][2]['icon'] != '':
|
||||
icon_table = user_settings[int_id(_rf_src)][2]['icon'][0]
|
||||
icon_icon = user_settings[int_id(_rf_src)][2]['icon'][1]
|
||||
if user_settings[int_id(_rf_src)][1]['ssid'] != '':
|
||||
ssid = user_settings[int_id(_rf_src)][1]['ssid']
|
||||
if user_settings[int_id(_rf_src)][3]['comment'] != '':
|
||||
comment = user_settings[int_id(_rf_src)][3]['comment']
|
||||
aprs_loc_packet = str(get_alias(int_id(_rf_src), subscriber_ids)) + '-' + ssid + '>APHBL3,TCPIP*:@' + str(datetime.datetime.utcnow().strftime("%H%M%Sh")) + str(aprs_lat) + icon_table + str(aprs_lon) + icon_icon + '/' + str(comment)
|
||||
logger.info(aprs_loc_packet)
|
||||
logger.info('User comment: ' + comment)
|
||||
logger.info('User SSID: ' + ssid)
|
||||
logger.info('User icon: ' + icon_table + icon_icon)
|
||||
# Attempt to prevent malformed packets from being uploaded.
|
||||
if int_id(_dst_id) == data_id:
|
||||
try:
|
||||
aprslib.parse(aprs_loc_packet)
|
||||
float(lat_deg) < 91
|
||||
@ -2428,60 +2441,61 @@ class routerHBP(HBSYSTEM):
|
||||
logger.info('Error. Failed to send packet. Packet may be malformed.')
|
||||
logger.info(error_exception)
|
||||
logger.info(str(traceback.extract_tb(error_exception.__traceback__)))
|
||||
udt_block = 1
|
||||
hdr_type = ''
|
||||
else:
|
||||
pass
|
||||
#NMEA type packets for Anytone like radios.
|
||||
#if _call_type == call_type or (_call_type == 'vcsbk' and pckt_seq > 3): #int.from_bytes(_seq, 'big') > 3 ):
|
||||
# 14FRS2013 contributed improved header filtering, KF7EEL added conditions to allow both call types at the same time
|
||||
if _call_type == call_type or (_call_type == 'vcsbk' and pckt_seq > 3 and call_type != 'unit') or (_call_type == 'group' and pckt_seq > 3 and call_type != 'unit') or (_call_type == 'group' and pckt_seq > 3 and call_type == 'both') or (_call_type == 'vcsbk' and pckt_seq > 3 and call_type == 'both') or (_call_type == 'unit' and pckt_seq > 3 and call_type == 'both'): #int.from_bytes(_seq, 'big') > 3 ):
|
||||
global packet_assembly, btf
|
||||
if _dtype_vseq == 6 or _dtype_vseq == 'group':
|
||||
global btf, hdr_start
|
||||
hdr_start = str(header_ID(_data))
|
||||
logger.info('Header from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + '. DMR ID: ' + str(int_id(_rf_src)))
|
||||
logger.info(ahex(bptc_decode(_data)))
|
||||
logger.info('Blocks to follow: ' + str(ba2num(bptc_decode(_data)[65:72])))
|
||||
btf = ba2num(bptc_decode(_data)[65:72])
|
||||
# Try resetting packet_assembly
|
||||
udt_block = 1
|
||||
hdr_type = ''
|
||||
else:
|
||||
pass
|
||||
#NMEA type packets for Anytone like radios.
|
||||
#if _call_type == call_type or (_call_type == 'vcsbk' and pckt_seq > 3): #int.from_bytes(_seq, 'big') > 3 ):
|
||||
# 14FRS2013 contributed improved header filtering, KF7EEL added conditions to allow both call types at the same time
|
||||
if _call_type == call_type or (_call_type == 'vcsbk' and pckt_seq > 3 and call_type != 'unit') or (_call_type == 'group' and pckt_seq > 3 and call_type != 'unit') or (_call_type == 'group' and pckt_seq > 3 and call_type == 'both') or (_call_type == 'vcsbk' and pckt_seq > 3 and call_type == 'both') or (_call_type == 'unit' and pckt_seq > 3 and call_type == 'both'): #int.from_bytes(_seq, 'big') > 3 ):
|
||||
global packet_assembly, btf
|
||||
if _dtype_vseq == 6 or _dtype_vseq == 'group':
|
||||
global btf, hdr_start
|
||||
hdr_start = str(header_ID(_data))
|
||||
logger.info('Header from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + '. DMR ID: ' + str(int_id(_rf_src)))
|
||||
logger.info(ahex(bptc_decode(_data)))
|
||||
logger.info('Blocks to follow: ' + str(ba2num(bptc_decode(_data)[65:72])))
|
||||
btf = ba2num(bptc_decode(_data)[65:72])
|
||||
# Try resetting packet_assembly
|
||||
packet_assembly = ''
|
||||
# Data blocks at 1/2 rate, see https://github.com/g4klx/MMDVM/blob/master/DMRDefines.h for data types. _dtype_seq defined here also
|
||||
if _dtype_vseq == 7:
|
||||
btf = btf - 1
|
||||
logger.info('Block #: ' + str(btf))
|
||||
#logger.info(_seq)
|
||||
logger.info('Data block from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + '. DMR ID: ' + str(int_id(_rf_src)) + '. Destination: ' + str(int_id(_dst_id)))
|
||||
logger.info(ahex(bptc_decode(_data)))
|
||||
if _seq == 0:
|
||||
n_packet_assembly = 0
|
||||
packet_assembly = ''
|
||||
# Data blocks at 1/2 rate, see https://github.com/g4klx/MMDVM/blob/master/DMRDefines.h for data types. _dtype_seq defined here also
|
||||
if _dtype_vseq == 7:
|
||||
btf = btf - 1
|
||||
logger.info('Block #: ' + str(btf))
|
||||
#logger.info(_seq)
|
||||
logger.info('Data block from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + '. DMR ID: ' + str(int_id(_rf_src)) + '. Destination: ' + str(int_id(_dst_id)))
|
||||
logger.info(ahex(bptc_decode(_data)))
|
||||
if _seq == 0:
|
||||
n_packet_assembly = 0
|
||||
packet_assembly = ''
|
||||
|
||||
#if btf < btf + 1:
|
||||
# 14FRS2013 removed condition, works great!
|
||||
n_packet_assembly = n_packet_assembly + 1
|
||||
packet_assembly = packet_assembly + str(bptc_decode(_data)) #str((decode_full_lc(b_packet)).strip('bitarray('))
|
||||
# Use block 0 as trigger. $GPRMC must also be in string to indicate NMEA.
|
||||
# This triggers the APRS upload
|
||||
if btf == 0:
|
||||
final_packet = str(bitarray(re.sub("\)|\(|bitarray|'", '', packet_assembly)).tobytes().decode('utf-8', 'ignore'))
|
||||
sms_hex = str(ba2hx(bitarray(re.sub("\)|\(|bitarray|'", '', packet_assembly))))
|
||||
sms_hex_string = re.sub("b'|'", '', str(sms_hex))
|
||||
#NMEA GPS sentence
|
||||
if '$GPRMC' in final_packet or '$GNRMC' in final_packet:
|
||||
logger.info(final_packet + '\n')
|
||||
# Eliminate excess bytes based on NMEA type
|
||||
# GPRMC
|
||||
if 'GPRMC' in final_packet:
|
||||
logger.info('GPRMC location')
|
||||
#nmea_parse = re.sub('A\*.*|.*\$', '', str(final_packet))
|
||||
nmea_parse = re.sub('A\*.*|.*\$|\n.*', '', str(final_packet))
|
||||
# GNRMC
|
||||
if 'GNRMC' in final_packet:
|
||||
logger.info('GNRMC location')
|
||||
nmea_parse = re.sub('.*\$|\n.*|V\*.*', '', final_packet)
|
||||
loc = pynmea2.parse(nmea_parse, check=False)
|
||||
logger.info('Latitude: ' + str(loc.lat) + str(loc.lat_dir) + ' Longitude: ' + str(loc.lon) + str(loc.lon_dir) + ' Direction: ' + str(loc.true_course) + ' Speed: ' + str(loc.spd_over_grnd) + '\n')
|
||||
|
||||
#if btf < btf + 1:
|
||||
# 14FRS2013 removed condition, works great!
|
||||
n_packet_assembly = n_packet_assembly + 1
|
||||
packet_assembly = packet_assembly + str(bptc_decode(_data)) #str((decode_full_lc(b_packet)).strip('bitarray('))
|
||||
# Use block 0 as trigger. $GPRMC must also be in string to indicate NMEA.
|
||||
# This triggers the APRS upload
|
||||
if btf == 0:
|
||||
final_packet = str(bitarray(re.sub("\)|\(|bitarray|'", '', packet_assembly)).tobytes().decode('utf-8', 'ignore'))
|
||||
sms_hex = str(ba2hx(bitarray(re.sub("\)|\(|bitarray|'", '', packet_assembly))))
|
||||
sms_hex_string = re.sub("b'|'", '', str(sms_hex))
|
||||
#NMEA GPS sentence
|
||||
if '$GPRMC' in final_packet or '$GNRMC' in final_packet:
|
||||
logger.info(final_packet + '\n')
|
||||
# Eliminate excess bytes based on NMEA type
|
||||
# GPRMC
|
||||
if 'GPRMC' in final_packet:
|
||||
logger.info('GPRMC location')
|
||||
#nmea_parse = re.sub('A\*.*|.*\$', '', str(final_packet))
|
||||
nmea_parse = re.sub('A\*.*|.*\$|\n.*', '', str(final_packet))
|
||||
# GNRMC
|
||||
if 'GNRMC' in final_packet:
|
||||
logger.info('GNRMC location')
|
||||
nmea_parse = re.sub('.*\$|\n.*|V\*.*', '', final_packet)
|
||||
loc = pynmea2.parse(nmea_parse, check=False)
|
||||
logger.info('Latitude: ' + str(loc.lat) + str(loc.lat_dir) + ' Longitude: ' + str(loc.lon) + str(loc.lon_dir) + ' Direction: ' + str(loc.true_course) + ' Speed: ' + str(loc.spd_over_grnd) + '\n')
|
||||
if int_id(_dst_id) == data_id:
|
||||
try:
|
||||
# Begin APRS format and upload
|
||||
# Disable opening file for reading to reduce "collision" or reading and writing at same time.
|
||||
@ -2532,8 +2546,8 @@ class routerHBP(HBSYSTEM):
|
||||
# Get callsign based on DMR ID
|
||||
# End APRS-IS upload
|
||||
# Assume this is an SMS message
|
||||
elif '$GPRMC' not in final_packet or '$GNRMC' not in final_packet:
|
||||
|
||||
elif '$GPRMC' not in final_packet or '$GNRMC' not in final_packet:
|
||||
|
||||
#### # Motorola type SMS header
|
||||
## if '824a' in hdr_start or '024a' in hdr_start:
|
||||
## logger.info('\nMotorola type SMS')
|
||||
@ -2552,26 +2566,42 @@ class routerHBP(HBSYSTEM):
|
||||
## packet_assembly = ''
|
||||
####
|
||||
## else:
|
||||
logger.info('\nSMS detected. Attempting to parse.')
|
||||
#logger.info(final_packet)
|
||||
logger.info(sms_hex)
|
||||
logger.info('\nSMS detected. Attempting to parse.')
|
||||
#logger.info(final_packet)
|
||||
logger.info(sms_hex)
|
||||
## logger.info(type(sms_hex))
|
||||
logger.info('Attempting to find command...')
|
||||
logger.info('Attempting to find command...')
|
||||
## sms = codecs.decode(bytes.fromhex(''.join(sms_hex[:-8].split('00'))), 'utf-8', 'ignore')
|
||||
sms = codecs.decode(bytes.fromhex(''.join(sms_hex_string[:-8].split('00'))), 'utf-8', 'ignore')
|
||||
msg_found = re.sub('.*\n', '', sms)
|
||||
logger.info('\n\n' + 'Received SMS from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + ', DMR ID: ' + str(int_id(_rf_src)) + ': ' + str(msg_found) + '\n')
|
||||
sms = codecs.decode(bytes.fromhex(''.join(sms_hex_string[:-8].split('00'))), 'utf-8', 'ignore')
|
||||
msg_found = re.sub('.*\n', '', sms)
|
||||
logger.info('\n\n' + 'Received SMS from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + ', DMR ID: ' + str(int_id(_rf_src)) + ': ' + str(msg_found) + '\n')
|
||||
if int_id(_dst_id) == data_id:
|
||||
process_sms(_rf_src, msg_found, _call_type)
|
||||
#packet_assembly = ''
|
||||
if int_id(_dst_id) != data_id:
|
||||
if '//' in sms or sms.count(',') > 4 or sms.count('.') > 3 or 'PIN' in sms:
|
||||
logger.info('Not logging due to possible data error, or double slash.')
|
||||
else:
|
||||
if int_id(_dst_id) == data_id:
|
||||
logger.info('SMS command, not logging')
|
||||
else:
|
||||
logger.info('Log SMS to dashboard and subscriber mailbox')
|
||||
mailbox_write(get_alias(int_id(_rf_src), subscriber_ids), int_id(_rf_src), time(), msg_found, str(get_alias(int_id(_dst_id), subscriber_ids)).upper())
|
||||
dashboard_sms_write(str(get_alias(int_id(_rf_src), subscriber_ids)), str(get_alias(int_id(_dst_id), subscriber_ids)), str(int_id(_dst_id)), str(int_id(_rf_src)), msg_found, time())
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#packet_assembly = ''
|
||||
pass
|
||||
#logger.info(bitarray(re.sub("\)|\(|bitarray|'", '', str(bptc_decode(_data)).tobytes().decode('utf-8', 'ignore'))))
|
||||
#logger.info('\n\n' + 'Received SMS from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + ', DMR ID: ' + str(int_id(_rf_src)) + ': ' + str(sms) + '\n')
|
||||
# Reset the packet assembly to prevent old data from returning.
|
||||
# 14FRS2013 moved variable reset
|
||||
hdr_start = ''
|
||||
n_packet_assembly = 0
|
||||
packet_assembly = ''
|
||||
btf = 0
|
||||
#logger.info(bitarray(re.sub("\)|\(|bitarray|'", '', str(bptc_decode(_data)).tobytes().decode('utf-8', 'ignore'))))
|
||||
#logger.info('\n\n' + 'Received SMS from ' + str(get_alias(int_id(_rf_src), subscriber_ids)) + ', DMR ID: ' + str(int_id(_rf_src)) + ': ' + str(sms) + '\n')
|
||||
# Reset the packet assembly to prevent old data from returning.
|
||||
# 14FRS2013 moved variable reset
|
||||
hdr_start = ''
|
||||
n_packet_assembly = 0
|
||||
packet_assembly = ''
|
||||
btf = 0
|
||||
#logger.info(_seq)
|
||||
#packet_assembly = '' #logger.info(_dtype_vseq)
|
||||
#logger.info(ahex(bptc_decode(_data)).decode('utf-8', 'ignore'))
|
||||
@ -2585,16 +2615,16 @@ class routerHBP(HBSYSTEM):
|
||||
if _call_type == 'group':
|
||||
self.group_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
# If destination ID = to DATA_DMR_ID, process packet
|
||||
if int_id(_dst_id) == data_id:
|
||||
self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
#if int_id(_dst_id) == data_id:
|
||||
self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
# Used for dev, leave commented out
|
||||
#self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
|
||||
elif _call_type == 'unit':
|
||||
# If destination ID = to DATA_DMR_ID, process packet
|
||||
if int_id(_dst_id) == data_id:
|
||||
#if int_id(_dst_id) == data_id:
|
||||
#logger.info('btf' + str(btf))
|
||||
self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
# Used for dev, leave commented out
|
||||
#self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
|
||||
@ -2608,8 +2638,8 @@ class routerHBP(HBSYSTEM):
|
||||
self.group_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
logger.debug('CSBK recieved, but HBlink does not process them currently. Packets routed to talkgroup.')
|
||||
# If destination ID = to DATA_DMR_ID, process packet
|
||||
if int_id(_dst_id) == data_id:
|
||||
self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
#if int_id(_dst_id) == data_id:
|
||||
self.data_received(_peer_id, _rf_src, _dst_id, _seq, _slot, _call_type, _frame_type, _dtype_vseq, _stream_id, _data)
|
||||
else:
|
||||
logger.error('Unknown call type recieved -- not processed')
|
||||
|
||||
@ -2679,6 +2709,7 @@ if __name__ == '__main__':
|
||||
loc_file = CONFIG['GPS_DATA']['LOCATION_FILE']
|
||||
the_mailbox_file = CONFIG['GPS_DATA']['MAILBOX_FILE']
|
||||
emergency_sos_file = CONFIG['GPS_DATA']['EMERGENCY_SOS_FILE']
|
||||
sms_file = CONFIG['GPS_DATA']['SMS_FILE']
|
||||
# User APRS settings
|
||||
user_settings_file = CONFIG['GPS_DATA']['USER_SETTINGS_FILE']
|
||||
|
||||
@ -2707,6 +2738,14 @@ if __name__ == '__main__':
|
||||
with open(bb_file, 'w') as user_bb_file:
|
||||
user_bb_file.write("[]")
|
||||
user_bb_file.close()
|
||||
|
||||
if Path(sms_file).is_file():
|
||||
pass
|
||||
else:
|
||||
Path(sms_file).touch()
|
||||
with open(sms_file, 'w') as user_sms_file:
|
||||
user_sms_file.write("[]")
|
||||
user_sms_file.close()
|
||||
#Only create if API enabled
|
||||
if use_api == True:
|
||||
# Generate the apps dictionary
|
||||
|
||||
@ -92,6 +92,52 @@ def get_loc_data():
|
||||
except:
|
||||
return str('<h1 style="text-align: center;">No data</h1>')
|
||||
|
||||
def get_sms_data():
|
||||
try:
|
||||
dash_sms = ast.literal_eval(os.popen('cat ' + sms_file).read())
|
||||
tmp_sms = ''
|
||||
|
||||
sms_hdr = '''
|
||||
|
||||
<tr>
|
||||
<td style="text-align: center;">
|
||||
<h2><strong> Source <br /></strong></h2>
|
||||
</td>
|
||||
<td style="text-align: center;">
|
||||
<h2> <strong>Destination</strong> </h2>
|
||||
</td>
|
||||
<td style="text-align: center;">
|
||||
<h2> <strong>SMS</strong> </h2>
|
||||
</td>
|
||||
<td style="text-align: center;">
|
||||
<h2> <strong>Local Time</strong> </h2>
|
||||
</td>
|
||||
</tr>
|
||||
'''
|
||||
|
||||
for e in dash_sms:
|
||||
if type(e['time']) == str:
|
||||
loc_time = str(e['time'])
|
||||
if type(e['time']) == int or type(e['time']) == float:
|
||||
loc_time = datetime.fromtimestamp(e['time']).strftime(time_format)
|
||||
tmp_sms = tmp_sms + '''
|
||||
<tr>
|
||||
<td style="text-align: center;">
|
||||
<p><strong> ''' + e['snd_call'] + ''' <br /></strong>''' + e['snd_dmr_id'] + '''<strong><br /></strong></p>
|
||||
</td>
|
||||
<td style="text-align: center;">
|
||||
<p><strong>''' + e['rcv_call'] + '''</strong><br />''' + e['rcv_dmr_id'] + '''</p>
|
||||
</td>
|
||||
<td style="text-align: center;"><strong> ''' + e['sms'] + ''' </strong></td>
|
||||
<td style="text-align: center;"> ''' + loc_time + ''' </td>
|
||||
</tr>
|
||||
'''
|
||||
|
||||
return str('<h1 style="text-align: center;">SMS</h1>' + tbl_hdr + sms_hdr + tmp_sms + tbl_ftr)
|
||||
except:
|
||||
return str('<h1 style="text-align: center;">No data</h1>')
|
||||
|
||||
|
||||
|
||||
def get_bb_data():
|
||||
try:
|
||||
@ -241,6 +287,12 @@ def dash_loc():
|
||||
def help():
|
||||
#return get_data()
|
||||
return render_template('help.html', title = dashboard_title, dashboard_url = dashboard_url, logo = logo, description = description, api = use_api, data_call_type = data_call_type, data_call_id = data_call_id, aprs_ssid = aprs_ssid)
|
||||
@app.route('/sms/')
|
||||
def dash_template_sms():
|
||||
#return get_data()
|
||||
#return render_template('sms.html', title = dashboard_title, logo = logo)
|
||||
return render_template('generic.html', title = dashboard_title, dashboard_url = dashboard_url, logo = logo, content = Markup(get_sms_data()))
|
||||
|
||||
@app.route('/about/')
|
||||
def about():
|
||||
#return get_data()
|
||||
@ -1001,6 +1053,8 @@ if __name__ == '__main__':
|
||||
user_settings_file = parser.get('GPS_DATA', 'USER_SETTINGS_FILE')
|
||||
|
||||
auth_token_file = parser.get('GPS_DATA', 'AUTHORIZED_TOKENS_FILE')
|
||||
sms_file = parser.get('GPS_DATA', 'SMS_FILE')
|
||||
|
||||
use_api = parser.get('GPS_DATA', 'USE_API')
|
||||
#access_systems_file = parser.get('GPS_DATA', 'ACCESS_SYSTEMS_FILE')
|
||||
#authorized_users_file = parser.get('GPS_DATA', 'AUTHORIZED_USERS_FILE')
|
||||
|
||||
@ -7,6 +7,7 @@
|
||||
<td style="text-align: center;"><button onclick="window.location.href='{{dashboard_url}}/';"> Dashboard Home </button></td>
|
||||
<td style="text-align: center;"><button onclick="window.location.href='{{dashboard_url}}/map';"> Station Map </button></td>
|
||||
<td style="text-align: center;"><button onclick="window.location.href='{{dashboard_url}}/mailbox';"> The Mailbox </button></td>
|
||||
<td style="text-align: center;"><button onclick="window.location.href='{{dashboard_url}}/sms';"> SMS Capture </button></td>
|
||||
<td style="text-align: center;"><button onclick="window.location.href='{{dashboard_url}}/user';"> User Settings </button></td>
|
||||
{% if api %}
|
||||
<td style="text-align: center;"><button onclick="window.location.href='{{dashboard_url}}/external_apps';"> External Applications </button></td>
|
||||
|
||||
@ -168,6 +168,7 @@ def build_config(_config_file):
|
||||
'LOCATION_FILE': config.get(section, 'LOCATION_FILE'),
|
||||
'BULLETIN_BOARD_FILE': config.get(section, 'BULLETIN_BOARD_FILE'),
|
||||
'MAILBOX_FILE': config.get(section, 'MAILBOX_FILE'),
|
||||
'SMS_FILE': config.get(section, 'SMS_FILE'),
|
||||
'EMERGENCY_SOS_FILE': config.get(section, 'EMERGENCY_SOS_FILE'),
|
||||
'USER_SETTINGS_FILE': config.get(section, 'USER_SETTINGS_FILE'),
|
||||
'USE_API': config.getboolean(section, 'USE_API'),
|
||||
|
||||
Loading…
Reference in New Issue
Block a user