diff --git a/config.py b/config.py index f86628c..efec699 100755 --- a/config.py +++ b/config.py @@ -104,6 +104,7 @@ def build_config(_config_file): CONFIG = {} CONFIG['GLOBAL'] = {} + CONFIG['APRS'] = {} CONFIG['REPORTS'] = {} CONFIG['LOGGER'] = {} CONFIG['ALIASES'] = {} @@ -122,6 +123,15 @@ def build_config(_config_file): 'TG1_ACL': config.get(section, 'TGID_TS1_ACL'), 'TG2_ACL': config.get(section, 'TGID_TS2_ACL') }) + + elif section == 'APRS': + CONFIG['APRS'].update({ + 'ENABLED': config.getboolean(section, 'ENABLED'), + 'CALLSIGN': config.get(section, 'CALLSIGN'), + 'REPORT_INTERVAL': config.getint(section, 'REPORT_INTERVAL'), + 'SERVER': config.get(section, 'SERVER'), + 'MESSAGE': config.get(section, 'MESSAGE') + }) elif section == 'REPORTS': CONFIG['REPORTS'].update({ diff --git a/hblink-SAMPLE.cfg b/hblink-SAMPLE.cfg index a3b616c..3e05f6b 100755 --- a/hblink-SAMPLE.cfg +++ b/hblink-SAMPLE.cfg @@ -1,241 +1,254 @@ -# PROGRAM-WIDE PARAMETERS GO HERE -# PATH - working path for files, leave it alone unless you NEED to change it -# PING_TIME - the interval that peers will ping the master, and re-try registraion -# - how often the Master maintenance loop runs -# MAX_MISSED - how many pings are missed before we give up and re-register -# - number of times the master maintenance loop runs before de-registering a peer -# -# ACLs: -# -# Access Control Lists are a very powerful tool for administering your system. -# But they consume packet processing time. Disable them if you are not using them. -# But be aware that, as of now, the configuration stanzas still need the ACL -# sections configured even if you're not using them. -# -# REGISTRATION ACLS ARE ALWAYS USED, ONLY SUBSCRIBER AND TGID MAY BE DISABLED!!! -# -# The 'action' May be PERMIT|DENY -# Each entry may be a single radio id, or a hypenated range (e.g. 1-2999) -# Format: -# ACL = 'action:id|start-end|,id|start-end,....' -# --for example-- -# SUB_ACL: DENY:1,1000-2000,4500-60000,17 -# -# ACL Types: -# REG_ACL: peer radio IDs for registration (only used on HBP master systems) -# SUB_ACL: subscriber IDs for end-users -# TGID_TS1_ACL: destination talkgroup IDs on Timeslot 1 -# TGID_TS2_ACL: destination talkgroup IDs on Timeslot 2 -# -# ACLs may be repeated for individual systems if needed for granularity -# Global ACLs will be processed BEFORE the system level ACLs -# Packets will be matched against all ACLs, GLOBAL first. If a packet 'passes' -# All elements, processing continues. Packets are discarded at the first -# negative match, or 'reject' from an ACL element. -# -# If you do not wish to use ACLs, set them to 'PERMIT:ALL' -# TGID_TS1_ACL in the global stanza is used for OPENBRIDGE systems, since all -# traffic is passed as TS 1 between OpenBridges -[GLOBAL] -PATH: ./ -PING_TIME: 5 -MAX_MISSED: 3 -USE_ACL: True -REG_ACL: PERMIT:ALL -SUB_ACL: DENY:1 -TGID_TS1_ACL: PERMIT:ALL -TGID_TS2_ACL: PERMIT:ALL - - -# NOT YET WORKING: NETWORK REPORTING CONFIGURATION -# Enabling "REPORT" will configure a socket-based reporting -# system that will send the configuration and other items -# to a another process (local or remote) that may process -# the information for some useful purpose, like a web dashboard. -# -# REPORT - True to enable, False to disable -# REPORT_INTERVAL - Seconds between reports -# REPORT_PORT - TCP port to listen on if "REPORT_NETWORKS" = NETWORK -# REPORT_CLIENTS - comma separated list of IPs you will allow clients -# to connect on. Entering a * will allow all. -# -# ****FOR NOW MUST BE TRUE - USE THE LOOPBACK IF YOU DON'T USE THIS!!!**** -[REPORTS] -REPORT: True -REPORT_INTERVAL: 60 -REPORT_PORT: 4321 -REPORT_CLIENTS: 127.0.0.1 - - -# SYSTEM LOGGER CONFIGURAITON -# This allows the logger to be configured without chaning the individual -# python logger stuff. LOG_FILE should be a complete path/filename for *your* -# system -- use /dev/null for non-file handlers. -# LOG_HANDLERS may be any of the following, please, no spaces in the -# list if you use several: -# null -# console -# console-timed -# file -# file-timed -# syslog -# LOG_LEVEL may be any of the standard syslog logging levels, though -# as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones -# used. -# -[LOGGER] -LOG_FILE: /tmp/hblink.log -LOG_HANDLERS: console-timed -LOG_LEVEL: DEBUG -LOG_NAME: HBlink - -# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES -# Ok, not the TGID, there's no master list I know of to download -# This is intended as a facility for other applcations built on top of -# HBlink to use, and will NOT be used in HBlink directly. -# STALE_DAYS is the number of days since the last download before we -# download again. Don't be an ass and change this to less than a few days. -[ALIASES] -TRY_DOWNLOAD: True -PATH: ./ -PEER_FILE: peer_ids.json -SUBSCRIBER_FILE: subscriber_ids.json -TGID_FILE: talkgroup_ids.json -PEER_URL: https://www.radioid.net/static/rptrs.json -SUBSCRIBER_URL: https://www.radioid.net/static/users.json -STALE_DAYS: 7 - -# OPENBRIDGE INSTANCES - DUPLICATE SECTION FOR MULTIPLE CONNECTIONS -# OpenBridge is a protocol originall created by DMR+ for connection between an -# IPSC2 server and Brandmeister. It has been implemented here at the suggestion -# of the Brandmeister team as a way to legitimately connect HBlink to the -# Brandemiester network. -# It is recommended to name the system the ID of the Brandmeister server that -# it connects to, but is not necessary. TARGET_IP and TARGET_PORT are of the -# Brandmeister or IPSC2 server you are connecting to. PASSPHRASE is the password -# that must be agreed upon between you and the operator of the server you are -# connecting to. NETWORK_ID is a number in the format of a DMR Radio ID that -# will be sent to the other server to identify this connection. -# other parameters follow the other system types. -# -# ACLs: -# OpenBridge does not 'register', so registration ACL is meaningless. -# OpenBridge passes all traffic on TS1, so there is only 1 TGID ACL. -# Otherwise ACLs work as described in the global stanza -[OBP-1] -MODE: OPENBRIDGE -ENABLED: True -IP: -PORT: 62035 -NETWORK_ID: 3129100 -PASSPHRASE: password -TARGET_IP: 1.2.3.4 -TARGET_PORT: 62035 -USE_ACL: True -SUB_ACL: DENY:1 -TGID_ACL: PERMIT:ALL - -# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS -# HomeBrew Protocol Master instances go here. -# IP may be left blank if there's one interface on your system. -# Port should be the port you want this master to listen on. It must be unique -# and unused by anything else. -# Repeat - if True, the master repeats traffic to peers, False, it does nothing. -# -# MAX_PEERS -- maximun number of peers that may be connect to this master -# at any given time. This is very handy if you're allowing hotspots to -# connect, or using a limited computer like a Raspberry Pi. -# -# ACLs: -# See comments in the GLOBAL stanza -[MASTER-1] -MODE: MASTER -ENABLED: True -REPEAT: True -MAX_PEERS: 10 -EXPORT_AMBE: False -IP: -PORT: 54000 -PASSPHRASE: s3cr37w0rd -GROUP_HANGTIME: 5 -USE_ACL: True -REG_ACL: DENY:1 -SUB_ACL: DENY:1 -TGID_TS1_ACL: PERMIT:ALL -TGID_TS2_ACL: PERMIT:ALL - -# PEER INSTANCES - DUPLICATE SECTION FOR MULTIPLE PEERS -# There are a LOT of errors in the HB Protocol specifications on this one! -# MOST of these items are just strings and will be properly dealt with by the program -# The TX & RX Frequencies are 9-digit numbers, and are the frequency in Hz. -# Latitude is an 8-digit unsigned floating point number. -# Longitude is a 9-digit signed floating point number. -# Height is in meters -# Setting Loose to True relaxes the validation on packets received from the master. -# This will allow HBlink to connect to a non-compliant system such as XLXD, DMR+ etc. -# -# ACLs: -# See comments in the GLOBAL stanza -[REPEATER-1] -MODE: PEER -ENABLED: True -LOOSE: False -EXPORT_AMBE: False -IP: -PORT: 54001 -MASTER_IP: 172.16.1.1 -MASTER_PORT: 54000 -PASSPHRASE: homebrew -CALLSIGN: W1ABC -RADIO_ID: 312000 -RX_FREQ: 449000000 -TX_FREQ: 444000000 -TX_POWER: 25 -COLORCODE: 1 -SLOTS: 1 -LATITUDE: 38.0000 -LONGITUDE: -095.0000 -HEIGHT: 75 -LOCATION: Anywhere, USA -DESCRIPTION: This is a cool repeater -URL: www.w1abc.org -SOFTWARE_ID: 20170620 -PACKAGE_ID: MMDVM_HBlink -GROUP_HANGTIME: 5 -OPTIONS: -USE_ACL: True -SUB_ACL: DENY:1 -TGID_TS1_ACL: PERMIT:ALL -TGID_TS2_ACL: PERMIT:ALL - -[XLX-1] -MODE: XLXPEER -ENABLED: True -LOOSE: True -EXPORT_AMBE: False -IP: -PORT: 54002 -MASTER_IP: 172.16.1.1 -MASTER_PORT: 62030 -PASSPHRASE: passw0rd -CALLSIGN: W1ABC -RADIO_ID: 312000 -RX_FREQ: 449000000 -TX_FREQ: 444000000 -TX_POWER: 25 -COLORCODE: 1 -SLOTS: 1 -LATITUDE: 38.0000 -LONGITUDE: -095.0000 -HEIGHT: 75 -LOCATION: Anywhere, USA -DESCRIPTION: This is a cool repeater -URL: www.w1abc.org -SOFTWARE_ID: 20170620 -PACKAGE_ID: MMDVM_HBlink -GROUP_HANGTIME: 5 -XLXMODULE: 4004 -USE_ACL: True -SUB_ACL: DENY:1 -TGID_TS1_ACL: PERMIT:ALL -TGID_TS2_ACL: PERMIT:ALL +# PROGRAM-WIDE PARAMETERS GO HERE +# PATH - working path for files, leave it alone unless you NEED to change it +# PING_TIME - the interval that peers will ping the master, and re-try registraion +# - how often the Master maintenance loop runs +# MAX_MISSED - how many pings are missed before we give up and re-register +# - number of times the master maintenance loop runs before de-registering a peer +# +# ACLs: +# +# Access Control Lists are a very powerful tool for administering your system. +# But they consume packet processing time. Disable them if you are not using them. +# But be aware that, as of now, the configuration stanzas still need the ACL +# sections configured even if you're not using them. +# +# REGISTRATION ACLS ARE ALWAYS USED, ONLY SUBSCRIBER AND TGID MAY BE DISABLED!!! +# +# The 'action' May be PERMIT|DENY +# Each entry may be a single radio id, or a hypenated range (e.g. 1-2999) +# Format: +# ACL = 'action:id|start-end|,id|start-end,....' +# --for example-- +# SUB_ACL: DENY:1,1000-2000,4500-60000,17 +# +# ACL Types: +# REG_ACL: peer radio IDs for registration (only used on HBP master systems) +# SUB_ACL: subscriber IDs for end-users +# TGID_TS1_ACL: destination talkgroup IDs on Timeslot 1 +# TGID_TS2_ACL: destination talkgroup IDs on Timeslot 2 +# +# ACLs may be repeated for individual systems if needed for granularity +# Global ACLs will be processed BEFORE the system level ACLs +# Packets will be matched against all ACLs, GLOBAL first. If a packet 'passes' +# All elements, processing continues. Packets are discarded at the first +# negative match, or 'reject' from an ACL element. +# +# If you do not wish to use ACLs, set them to 'PERMIT:ALL' +# TGID_TS1_ACL in the global stanza is used for OPENBRIDGE systems, since all +# traffic is passed as TS 1 between OpenBridges +[GLOBAL] +PATH: ./ +PING_TIME: 5 +MAX_MISSED: 3 +USE_ACL: True +REG_ACL: PERMIT:ALL +SUB_ACL: DENY:1 +TGID_TS1_ACL: PERMIT:ALL +TGID_TS2_ACL: PERMIT:ALL + +# APRS - BY IU7IGU +# Enabling "APRS" will configure APRS-Beaconing of Master's connection +# like repeater and hotspots. +# REPORT_INTERVAL in Minute (ALLOW only > 3 Minutes) +# CALLSIGN: Callsign that will pubblish data on aprs server +# MESSAGE: This message will print on APRS description together RX and TX Frequency + +[APRS] +ENABLED: True +REPORT_INTERVAL: 5 +CALLSIGN:HB1LNK-11 +SERVER:euro.aprs2.net +MESSAGE:Connesso ad HBLINK + +# NOT YET WORKING: NETWORK REPORTING CONFIGURATION +# Enabling "REPORT" will configure a socket-based reporting +# system that will send the configuration and other items +# to a another process (local or remote) that may process +# the information for some useful purpose, like a web dashboard. +# +# REPORT - True to enable, False to disable +# REPORT_INTERVAL - Seconds between reports +# REPORT_PORT - TCP port to listen on if "REPORT_NETWORKS" = NETWORK +# REPORT_CLIENTS - comma separated list of IPs you will allow clients +# to connect on. Entering a * will allow all. +# +# ****FOR NOW MUST BE TRUE - USE THE LOOPBACK IF YOU DON'T USE THIS!!!**** +[REPORTS] +REPORT: True +REPORT_INTERVAL: 60 +REPORT_PORT: 4321 +REPORT_CLIENTS: 127.0.0.1 + + +# SYSTEM LOGGER CONFIGURAITON +# This allows the logger to be configured without chaning the individual +# python logger stuff. LOG_FILE should be a complete path/filename for *your* +# system -- use /dev/null for non-file handlers. +# LOG_HANDLERS may be any of the following, please, no spaces in the +# list if you use several: +# null +# console +# console-timed +# file +# file-timed +# syslog +# LOG_LEVEL may be any of the standard syslog logging levels, though +# as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones +# used. +# +[LOGGER] +LOG_FILE: /tmp/hblink.log +LOG_HANDLERS: console-timed +LOG_LEVEL: DEBUG +LOG_NAME: HBlink + +# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES +# Ok, not the TGID, there's no master list I know of to download +# This is intended as a facility for other applcations built on top of +# HBlink to use, and will NOT be used in HBlink directly. +# STALE_DAYS is the number of days since the last download before we +# download again. Don't be an ass and change this to less than a few days. +[ALIASES] +TRY_DOWNLOAD: True +PATH: ./ +PEER_FILE: peer_ids.json +SUBSCRIBER_FILE: subscriber_ids.json +TGID_FILE: talkgroup_ids.json +PEER_URL: https://www.radioid.net/static/rptrs.json +SUBSCRIBER_URL: https://www.radioid.net/static/users.json +STALE_DAYS: 7 + +# OPENBRIDGE INSTANCES - DUPLICATE SECTION FOR MULTIPLE CONNECTIONS +# OpenBridge is a protocol originall created by DMR+ for connection between an +# IPSC2 server and Brandmeister. It has been implemented here at the suggestion +# of the Brandmeister team as a way to legitimately connect HBlink to the +# Brandemiester network. +# It is recommended to name the system the ID of the Brandmeister server that +# it connects to, but is not necessary. TARGET_IP and TARGET_PORT are of the +# Brandmeister or IPSC2 server you are connecting to. PASSPHRASE is the password +# that must be agreed upon between you and the operator of the server you are +# connecting to. NETWORK_ID is a number in the format of a DMR Radio ID that +# will be sent to the other server to identify this connection. +# other parameters follow the other system types. +# +# ACLs: +# OpenBridge does not 'register', so registration ACL is meaningless. +# OpenBridge passes all traffic on TS1, so there is only 1 TGID ACL. +# Otherwise ACLs work as described in the global stanza +[OBP-1] +MODE: OPENBRIDGE +ENABLED: True +IP: +PORT: 62035 +NETWORK_ID: 3129100 +PASSPHRASE: password +TARGET_IP: 1.2.3.4 +TARGET_PORT: 62035 +USE_ACL: True +SUB_ACL: DENY:1 +TGID_ACL: PERMIT:ALL + +# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS +# HomeBrew Protocol Master instances go here. +# IP may be left blank if there's one interface on your system. +# Port should be the port you want this master to listen on. It must be unique +# and unused by anything else. +# Repeat - if True, the master repeats traffic to peers, False, it does nothing. +# +# MAX_PEERS -- maximun number of peers that may be connect to this master +# at any given time. This is very handy if you're allowing hotspots to +# connect, or using a limited computer like a Raspberry Pi. +# +# ACLs: +# See comments in the GLOBAL stanza +[MASTER-1] +MODE: MASTER +ENABLED: True +REPEAT: True +MAX_PEERS: 10 +EXPORT_AMBE: False +IP: +PORT: 54000 +PASSPHRASE: s3cr37w0rd +GROUP_HANGTIME: 5 +USE_ACL: True +REG_ACL: DENY:1 +SUB_ACL: DENY:1 +TGID_TS1_ACL: PERMIT:ALL +TGID_TS2_ACL: PERMIT:ALL + +# PEER INSTANCES - DUPLICATE SECTION FOR MULTIPLE PEERS +# There are a LOT of errors in the HB Protocol specifications on this one! +# MOST of these items are just strings and will be properly dealt with by the program +# The TX & RX Frequencies are 9-digit numbers, and are the frequency in Hz. +# Latitude is an 8-digit unsigned floating point number. +# Longitude is a 9-digit signed floating point number. +# Height is in meters +# Setting Loose to True relaxes the validation on packets received from the master. +# This will allow HBlink to connect to a non-compliant system such as XLXD, DMR+ etc. +# +# ACLs: +# See comments in the GLOBAL stanza +[REPEATER-1] +MODE: PEER +ENABLED: True +LOOSE: False +EXPORT_AMBE: False +IP: +PORT: 54001 +MASTER_IP: 172.16.1.1 +MASTER_PORT: 54000 +PASSPHRASE: homebrew +CALLSIGN: W1ABC +RADIO_ID: 312000 +RX_FREQ: 449000000 +TX_FREQ: 444000000 +TX_POWER: 25 +COLORCODE: 1 +SLOTS: 1 +LATITUDE: 38.0000 +LONGITUDE: -095.0000 +HEIGHT: 75 +LOCATION: Anywhere, USA +DESCRIPTION: This is a cool repeater +URL: www.w1abc.org +SOFTWARE_ID: 20170620 +PACKAGE_ID: MMDVM_HBlink +GROUP_HANGTIME: 5 +OPTIONS: +USE_ACL: True +SUB_ACL: DENY:1 +TGID_TS1_ACL: PERMIT:ALL +TGID_TS2_ACL: PERMIT:ALL + +[XLX-1] +MODE: XLXPEER +ENABLED: True +LOOSE: True +EXPORT_AMBE: False +IP: +PORT: 54002 +MASTER_IP: 172.16.1.1 +MASTER_PORT: 62030 +PASSPHRASE: passw0rd +CALLSIGN: W1ABC +RADIO_ID: 312000 +RX_FREQ: 449000000 +TX_FREQ: 444000000 +TX_POWER: 25 +COLORCODE: 1 +SLOTS: 1 +LATITUDE: 38.0000 +LONGITUDE: -095.0000 +HEIGHT: 75 +LOCATION: Anywhere, USA +DESCRIPTION: This is a cool repeater +URL: www.w1abc.org +SOFTWARE_ID: 20170620 +PACKAGE_ID: MMDVM_HBlink +GROUP_HANGTIME: 5 +XLXMODULE: 4004 +USE_ACL: True +SUB_ACL: DENY:1 +TGID_TS1_ACL: PERMIT:ALL +TGID_TS2_ACL: PERMIT:ALL diff --git a/hblink.py b/hblink.py index 83b67ad..909d169 100755 --- a/hblink.py +++ b/hblink.py @@ -35,6 +35,9 @@ from hashlib import sha256, sha1 from hmac import new as hmac_new, compare_digest from time import time from collections import deque +import aprslib +import os + # Twisted is pretty important, so I keep it separate from twisted.internet.protocol import DatagramProtocol, Factory, Protocol @@ -66,6 +69,8 @@ __email__ = 'n0mjs@me.com' # Global variables used whether we are a module or __main__ systems = {} +open("nom_aprs","w").close + # Timed loop used for reporting HBP status def config_reports(_config, _factory): def reporting_loop(_logger, _server): @@ -80,10 +85,10 @@ def config_reports(_config, _factory): reporting = task.LoopingCall(reporting_loop, logger, report_server) reporting.start(_config['REPORTS']['REPORT_INTERVAL']) - return report_server + # Shut ourselves down gracefully by disconnecting from the masters and peers. def hblink_handler(_signal, _frame): for system in systems: @@ -104,6 +109,7 @@ def acl_check(_id, _acl): # OPENBRIDGE CLASS #************************************************ + class OPENBRIDGE(DatagramProtocol): def __init__(self, _name, _config, _report): # Define a few shortcuts to make the rest of the class more readable @@ -112,7 +118,9 @@ class OPENBRIDGE(DatagramProtocol): self._report = _report self._config = self._CONFIG['SYSTEMS'][self._system] self._laststrid = deque([], 20) - + + + def dereg(self): logger.info('(%s) is mode OPENBRIDGE. No De-Registration required, continuing shutdown', self._system) @@ -474,8 +482,18 @@ class HBSYSTEM(DatagramProtocol): and self._peers[_peer_id]['SOCKADDR'] == _sockaddr: logger.info('(%s) Peer is closing down: %s (%s)', self._system, self._peers[_peer_id]['CALLSIGN'], int_id(_peer_id)) self.transport.write(b''.join([MSTNAK, _peer_id]), _sockaddr) + if self._CONFIG['APRS']['ENABLED']: + fn = 'nom_aprs' + f = open(fn) + output = [] + for line in f: + if not str(int_id(_peer_id)) in line: + output.append(line) + f.close() + f = open(fn, 'w') + f.writelines(output) + f.close() del self._peers[_peer_id] - else: _peer_id = _data[4:8] # Configure Command if _peer_id in self._peers \ @@ -502,6 +520,124 @@ class HBSYSTEM(DatagramProtocol): self.send_peer(_peer_id, b''.join([RPTACK, _peer_id])) logger.info('(%s) Peer %s (%s) has sent repeater configuration', self._system, _this_peer['CALLSIGN'], _this_peer['RADIO_ID']) + #APRS IMPLEMENTATION + conta = 0 + lista_blocco=['ysf', 'xlx', 'nxdn', 'dstar', 'echolink','p25', 'svx'] + if self._CONFIG['APRS']['ENABLED'] and not str(_this_peer['CALLSIGN'].decode('UTF-8')).replace(' ', '').isalpha() : + file = open("nom_aprs","r") + linee = file.readlines() + file.close() + for link in lista_blocco: + if int(str(_this_peer['CALLSIGN'].decode('UTF-8')).replace(' ', '').find(link.upper())) == 0: + conta = conta + 1 + if len(linee) > 0: + logging.info('Leggo') + for linea in linee: + dati_l = linea.split(':') + if str(_this_peer['RADIO_ID']) == str(dati_l[1]): + conta = conta + 1 + + if conta == 0: + file=open("nom_aprs",'a') + if len(str(_this_peer['RADIO_ID'])) > 7: + id_pr=int(str(_this_peer['RADIO_ID'])[-2:]) + callsign_u=str(_this_peer['CALLSIGN'].decode('UTF-8'))+"-"+str(id_pr) + file.write(callsign_u.replace(' ', '')+ ":"+ str(_this_peer['RADIO_ID']) +":"+ str(_this_peer['RX_FREQ'].decode('UTF-8')) + ":" + str(_this_peer['TX_FREQ'].decode('UTF-8'))+ ":" + str(_this_peer['LATITUDE'].decode('UTF-8')) + ":" + str(_this_peer['LONGITUDE'].decode('UTF-8')) + "\n") + file.close() + else: + file.write(str(_this_peer['CALLSIGN'].decode('UTF-8')).replace(' ', '')+ ":"+ str(_this_peer['RADIO_ID']) +":"+ str(_this_peer['RX_FREQ'].decode('UTF-8')) + ":" + str(_this_peer['TX_FREQ'].decode('UTF-8'))+ ":" + str(_this_peer['LATITUDE'].decode('UTF-8')) + ":" + str(_this_peer['LONGITUDE'].decode('UTF-8')) + "\n") + file.close() + else: + if conta == 0: + file=open("nom_aprs",'a') + if len(str(_this_peer['RADIO_ID'])) > 7: + id_pr=int(str(_this_peer['RADIO_ID'])[-2:]) + callsign_u=str(_this_peer['CALLSIGN'].decode('UTF-8'))+"-"+str(id_pr) + file.write(callsign_u.replace(' ', '')+ ":"+ str(_this_peer['RADIO_ID']) +":"+ str(_this_peer['RX_FREQ'].decode('UTF-8')) + ":" + str(_this_peer['TX_FREQ'].decode('UTF-8'))+ ":" + str(_this_peer['LATITUDE'].decode('UTF-8')) + ":" + str(_this_peer['LONGITUDE'].decode('UTF-8')) + "\n") + file.close() + else: + file.write(str(_this_peer['CALLSIGN'].decode('UTF-8')).replace(' ', '')+ ":"+ str(_this_peer['RADIO_ID']) +":"+ str(_this_peer['RX_FREQ'].decode('UTF-8')) + ":" + str(_this_peer['TX_FREQ'].decode('UTF-8'))+ ":" + str(_this_peer['LATITUDE'].decode('UTF-8')) + ":" + str(_this_peer['LONGITUDE'].decode('UTF-8')) + "\n") + file.close() + + def sendAprs(): + AIS = aprslib.IS(str(self._CONFIG['APRS']['CALLSIGN']), passwd=aprslib.passcode(str(self._CONFIG['APRS']['CALLSIGN'])), host=str(self._CONFIG['APRS']['SERVER']), port=14580) + AIS.connect() + f = open('nom_aprs', 'r') + lines = f.readlines() + if lines: + for line in lines: + if line != ' ': + lat_verso = '' + lon_verso = '' + dati = line.split(":") + d1_c = int(float(dati[4])) + d2_c = int(float(dati[5])) + + if d1_c < 0: + d1 = abs(d1_c) + dm1=abs(float(dati[4])) - d1 + dm1_s= float(dm1) * 60 + dm1_u="{:.4f}".format(dm1_s) + if d1 < 10 and d1 > -10: + lat_utile='0'+str(d1)+str(dm1_u) + else: + lat_utile = str(d1)+str(dm1_u) + lat_verso = 'S' + else: + d1 = int(float(dati[4])) + dm1=float(dati[4]) - d1 + dm1_s= float(dm1) * 60 + dm1_u="{:.4f}".format(dm1_s) + if d1 < 10 and d1 > -10: + lat_utile='0'+str(d1)+str(dm1_u) + else: + lat_utile = str(d1)+str(dm1_u) + lat_verso = 'N' + + + if d2_c < 0: + d2=abs(d2_c) + dm2=abs(float(dati[5])) - d2 + dm2_s= float(dm2) * 60 + dm2_u="{:.3f}".format(dm2_s) + if d2 < 10 and d2 > -10: + lon_utile = '00'+str(d2)+str(dm2_u) + elif d2 < 100: + lon_utile = '0'+str(d2)+str(dm2_u) + else: + lon_utile = str(d2)+str(dm2_s) + lon_verso = 'W' + + else: + d2=int(float(dati[5])) + dm2=float(dati[5]) - d2 + dm2_s= float(dm2) * 60 + dm2_u="{:.3f}".format(dm2_s) + if d2 < 10 and d2 > -10: + lon_utile = '00'+str(d2)+str(dm2_u) + elif d2 < 100: + lon_utile = '0'+str(d2)+str(dm2_u) + else: + lon_utile = str(d2)+str(dm2_u) + lon_verso = 'E' + + rx_utile = dati[2][0:3]+'.'+dati[2][3:] + tx_utile = dati[3][0:3]+'.'+dati[3][3:] + + + AIS.sendall(str(dati[0])+">APRS,TCPIP*,qAC,"+str(self._CONFIG['APRS']['CALLSIGN'])+":!"+str(lat_utile)[:-2]+lat_verso+"/"+str(lon_utile)[:-1]+lon_verso+"r"+str(self._CONFIG['APRS']['MESSAGE'])+' RX: '+str(rx_utile)+' TX: '+str(tx_utile)) + logging.info('APRS INVIATO') + + if conta == 0: + if self._CONFIG['APRS']['REPORT_INTERVAL'] > 3: + l=task.LoopingCall(sendAprs) + l.start(float(int(self._CONFIG['APRS']['REPORT_INTERVAL']*60))) + else: + l=task.LoopingCall(sendAprs) + l.start(5*60) + logger.info('Report Time APRS to short') + + else: self.transport.write(b''.join([MSTNAK, _peer_id]), _sockaddr) logger.warning('(%s) Peer info from Radio ID that has not logged in: %s', self._system, int_id(_peer_id)) @@ -768,6 +904,8 @@ if __name__ == '__main__': import sys import os import signal + import aprslib + import threading # Change the current directory to the location of the application os.chdir(os.path.dirname(os.path.realpath(sys.argv[0]))) @@ -789,12 +927,12 @@ if __name__ == '__main__': if cli_args.LOG_LEVEL: CONFIG['LOGGER']['LOG_LEVEL'] = cli_args.LOG_LEVEL logger = log.config_logging(CONFIG['LOGGER']) - logger.info('\n\nCopyright (c) 2013, 2014, 2015, 2016, 2018, 2019\n\tThe Regents of the K0USY Group. All rights reserved.\n') + logger.info('APRS IMPLEMENTATION BY IU7IGU email: iu7igu@yahoo.com \n\nCopyright (c) 2013, 2014, 2015, 2016, 2018, 2019\n\tThe Regents of the K0USY Group. All rights reserved.') logger.debug('(GLOBAL) Logging system started, anything from here on gets logged') # Set up the signal handler def sig_handler(_signal, _frame): - logger.info('(GLOBAL) SHUTDOWN: HBLINK IS TERMINATING WITH SIGNAL %s', str(_signal)) + logger.info('(GLOBAL) SHUTDOWN: HBLINK IS TERMINATING WITH SIGNAL %s', str(_signal)) hblink_handler(_signal, _frame) logger.info('(GLOBAL) SHUTDOWN: ALL SYSTEM HANDLERS EXECUTED - STOPPING REACTOR') reactor.stop() @@ -824,3 +962,4 @@ if __name__ == '__main__': logger.debug('(GLOBAL) %s instance created: %s, %s', CONFIG['SYSTEMS'][system]['MODE'], system, systems[system]) reactor.run() +