# PROGRAM-WIDE PARAMETERS GO HERE
# PATH - working path for files, leave it alone unless you NEED to change it
# PING_TIME - the interval that peers will ping the master, and re-try registraion
#           - how often the Master maintenance loop runs
# MAX_MISSED - how many pings are missed before we give up and re-register
#           - number of times the master maintenance loop runs before de-registering a peer
#
# ACLs:
#
# Access Control Lists are a very powerful tool for administering your system.
# But they consume packet processing time. Disable them if you are not using them.
# But be aware that, as of now, the configuration stanzas still need the ACL
# sections configured even if you're not using them.
#
# REGISTRATION ACLS ARE ALWAYS USED, ONLY SUBSCRIBER AND TGID MAY BE DISABLED!!!
#
# The 'action' May be PERMIT|DENY
# Each entry may be a single radio id, or a hypenated range (e.g. 1-2999)
# Format:
# 	ACL = 'action:id|start-end|,id|start-end,....'
#		--for example--
#	SUB_ACL: DENY:1,1000-2000,4500-60000,17
#
# ACL Types:
# 	REG_ACL: peer radio IDs for registration (only used on HBP master systems)
# 	SUB_ACL: subscriber IDs for end-users
# 	TGID_TS1_ACL: destination talkgroup IDs on Timeslot 1
# 	TGID_TS2_ACL: destination talkgroup IDs on Timeslot 2
#
# ACLs may be repeated for individual systems if needed for granularity
# Global ACLs will be processed BEFORE the system level ACLs
# Packets will be matched against all ACLs, GLOBAL first. If a packet 'passes'
# All elements, processing continues. Packets are discarded at the first
# negative match, or 'reject' from an ACL element.
#
# If you do not wish to use ACLs, set them to 'PERMIT:ALL'
# TGID_TS1_ACL in the global stanza is used for OPENBRIDGE systems, since all
# traffic is passed as TS 1 between OpenBridges
[GLOBAL]
PATH: ./
PING_TIME: 5
MAX_MISSED: 3
USE_ACL: True
REG_ACL: PERMIT:ALL
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL


# NOT YET WORKING: NETWORK REPORTING CONFIGURATION
#   Enabling "REPORT" will configure a socket-based reporting
#   system that will send the configuration and other items
#   to a another process (local or remote) that may process
#   the information for some useful purpose, like a web dashboard.
#
#   REPORT - True to enable, False to disable
#   REPORT_INTERVAL - Seconds between reports
#   REPORT_PORT - TCP port to listen on if "REPORT_NETWORKS" = NETWORK
#   REPORT_CLIENTS - comma separated list of IPs you will allow clients
#       to connect on. Entering a * will allow all.
#
# ****FOR NOW MUST BE TRUE - USE THE LOOPBACK IF YOU DON'T USE THIS!!!****
[REPORTS]
REPORT: True
REPORT_INTERVAL: 60
REPORT_PORT: 4321
REPORT_CLIENTS: 127.0.0.1


# SYSTEM LOGGER CONFIGURAITON
#   This allows the logger to be configured without chaning the individual
#   python logger stuff. LOG_FILE should be a complete path/filename for *your*
#   system -- use /dev/null for non-file handlers.
#   LOG_HANDLERS may be any of the following, please, no spaces in the
#   list if you use several:
#       null
#       console
#       console-timed
#       file
#       file-timed
#       syslog
#   LOG_LEVEL may be any of the standard syslog logging levels, though
#   as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones
#   used.
#
[LOGGER]
LOG_FILE: /tmp/hblink.log
LOG_HANDLERS: console-timed
LOG_LEVEL: DEBUG
LOG_NAME: HBlink

# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES
# Ok, not the TGID, there's no master list I know of to download
# This is intended as a facility for other applcations built on top of
# HBlink to use, and will NOT be used in HBlink directly.
# STALE_DAYS is the number of days since the last download before we
# download again. Don't be an ass and change this to less than a few days.
[ALIASES]
TRY_DOWNLOAD: True
PATH: ./
PEER_FILE: peer_ids.json
SUBSCRIBER_FILE: subscriber_ids.json
TGID_FILE: talkgroup_ids.json
PEER_URL: https://www.radioid.net/static/rptrs.json
SUBSCRIBER_URL: https://www.radioid.net/static/users.json
STALE_DAYS: 7

# USER MANAGER
# This is where to configure the details for use with a user managment script
[USER_MANAGER]
THIS_SERVER_NAME: My MMDVM Server
REMOTE_CONFIG_ENABLED: True
# URL of the user managment server
URL: http://localhost:8080/svr
# Integer appended to DMR ID during the generation of a passphrase
APPEND_INT: 1
EXTRA_INT_1: 5
EXTRA_INT_2: 8
EXTRA_1: TeSt
EXTRA_2: DmR4
# Secret used to authenticate with user managment server, before checking if user login is approved
SHARED_SECRET: test
# Shorten passphrases
SHORTEN_PASSPHRASE: False
SHORTEN_SAMPLE: 4
SHORTEN_LENGTH: 4
BURN_FILE: ./burn_ids.txt
BURN_INT: 5


# OPENBRIDGE INSTANCES - DUPLICATE SECTION FOR MULTIPLE CONNECTIONS
# OpenBridge is a protocol originall created by DMR+ for connection between an
# IPSC2 server and Brandmeister. It has been implemented here at the suggestion
# of the Brandmeister team as a way to legitimately connect HBlink to the
# Brandemiester network.
# It is recommended to name the system the ID of the Brandmeister server that
# it connects to, but is not necessary. TARGET_IP and TARGET_PORT are of the
# Brandmeister or IPSC2 server you are connecting to. PASSPHRASE is the password
# that must be agreed upon between you and the operator of the server you are
# connecting to. NETWORK_ID is a number in the format of a DMR Radio ID that
# will be sent to the other server to identify this connection.
# other parameters follow the other system types.
#
# ACLs:
# OpenBridge does not 'register', so registration ACL is meaningless.
# Proper OpenBridge passes all traffic on TS1.
# HBlink can extend OPB to use both slots for unit calls only.
# Setting "BOTH_SLOTS" True ONLY affects unit traffic!
# Otherwise ACLs work as described in the global stanza
[OBP-1]
MODE: OPENBRIDGE
ENABLED: False
IP:
PORT: 62035
NETWORK_ID: 3129100
PASSPHRASE: password
TARGET_IP: 1.2.3.4
TARGET_PORT: 62035
BOTH_SLOTS: True
USE_ACL: True
SUB_ACL: DENY:1
TGID_ACL: PERMIT:ALL

# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS
# HomeBrew Protocol Master instances go here.
# IP may be left blank if there's one interface on your system.
# Port should be the port you want this master to listen on. It must be unique
# and unused by anything else.
# Repeat - if True, the master repeats traffic to peers, False, it does nothing.
#
# MAX_PEERS -- maximun number of peers that may be connect to this master
# at any given time. This is very handy if you're allowing hotspots to
# connect, or using a limited computer like a Raspberry Pi.
#
# ACLs:
# See comments in the GLOBAL stanza
[MASTER-1]
MODE: MASTER
ENABLED: True

# Use the user manager? If False, MASTER instance will operate as normal.
USE_USER_MAN: False

REPEAT: True
MAX_PEERS: 10
EXPORT_AMBE: False
IP:
PORT: 54000
PASSPHRASE: s3cr37w0rd
GROUP_HANGTIME: 5
USE_ACL: True
REG_ACL: DENY:1
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL

# PEER INSTANCES - DUPLICATE SECTION FOR MULTIPLE PEERS
# There are a LOT of errors in the HB Protocol specifications on this one!
# MOST of these items are just strings and will be properly dealt with by the program
# The TX & RX Frequencies are 9-digit numbers, and are the frequency in Hz.
# Latitude is an 8-digit unsigned floating point number.
# Longitude is a 9-digit signed floating point number.
# Height is in meters
# Setting Loose to True relaxes the validation on packets received from the master.
# This will allow HBlink to connect to a non-compliant system such as XLXD, DMR+ etc.
#
# ACLs:
# See comments in the GLOBAL stanza
[REPEATER-1]
MODE: PEER
ENABLED: False
LOOSE: False
EXPORT_AMBE: False
IP: 
PORT: 54001
MASTER_IP: 172.16.1.1
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: W1ABC
RADIO_ID: 312000
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:
USE_ACL: True
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL

[XLX-1]
MODE: XLXPEER
ENABLED: False
LOOSE: True
EXPORT_AMBE: False
IP: 
PORT: 54002
MASTER_IP: 172.16.1.1
MASTER_PORT: 62030
PASSPHRASE: passw0rd
CALLSIGN: W1ABC
RADIO_ID: 312000
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
XLXMODULE: 4004
USE_ACL: True
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL