TeaSpeak-Client/native/codec/libraries/speex/ti/testenc-TI-C5x.c
2019-10-26 01:51:40 +02:00

295 lines
8.5 KiB
C

/* Copyright (C) 2005 Psi Systems, Inc.
File: testenc-TI-C5x.c
Encoder/Decoder Loop Main file for TI C54xx and C55xx processors
for use with TI Code Composer (TM) DSP development tools.
Modified from speexlib/testenc.c
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/* Modified from speexlib/testenc.c for Code Composer simulator */
#include <speex/speex.h>
#include <stdio.h>
#include <stdlib.h>
#include <speex/speex_callbacks.h>
#include <..\libspeex\arch.h>
#undef DECODE_ONLY
#define CHECK_RESULT /* Compares original file with encoded/decoder file */
#define TESTENC_BYTES_PER_FRAME 20 /* 8kbps */
#define TESTENC_QUALITY 4 /* 8kbps */
//#define TESTENC_BYTES_PER_FRAME 28 /* 11kbps */
//#define TESTENC_QUALITY 5 /* 11 kbps */
/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf)
* {1, 8, 2, 3, 3, 4, 4, 5, 5, 6, 7}
* 0 -> 2150
* 1 -> 3950
* 2 -> 5950
* 3 -> 8000
* 4 -> 8000
* 5 -> 11000
* 6 -> 11000
* 7 -> 15000
* 8 -> 15000
* 9 -> 18200
*10 -> 26400 */
#ifdef FIXED_DEBUG
extern long long spx_mips;
#endif
#include <math.h>
#ifdef MANUAL_ALLOC
/* Take all Speex space from this private heap */
/* This is useful for multichannel applications */
#pragma DATA_SECTION(spxHeap, ".myheap");
static char spxHeap[SPEEX_PERSIST_STACK_SIZE];
#pragma DATA_SECTION(spxScratch, ".myheap");
static char spxScratch[SPEEX_SCRATCH_STACK_SIZE];
char *spxGlobalHeapPtr, *spxGlobalHeapEnd;
char *spxGlobalScratchPtr, *spxGlobalScratchEnd;
#endif
void byte2word(short* pInBuf, short* pOutBuf, int nWords)
{
short *pIn, *pOut, sNext;
int i;
pIn = pInBuf;
pOut = pOutBuf;
for(i=0;i<nWords;i++)
{
sNext = *pIn++; // Get low byte
*pOut++ = (sNext & 0x00ff) | (*pIn++ << 8); // insert high byte
}
}
void word2byte(short* pInBuf, short* pOutBuf, int nWords)
{
short *pIn, *pOut;
int i;
pIn = pInBuf;
pOut = pOutBuf;
for(i=0;i<nWords;i++)
{
*pOut++ = *pIn & 0x00ff; // Get low byte
*pOut++ = (short) ((unsigned short) *pIn++ >> 8);
}
}
void main()
{
char *outFile, *bitsFile;
FILE *fout, *fbits=NULL;
#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
char *inFile;
FILE *fin;
short in_short[FRAME_SIZE];
#endif
short out_short[FRAME_SIZE];
short inout_byte[2*FRAME_SIZE];
#ifndef DECODE_ONLY
int nbChars;
#endif
#ifdef CHECK_RESULT
float sigpow,errpow,snr, seg_snr=0;
int snr_frames = 0;
int i;
#endif
char cbits[TESTENC_BYTES_PER_FRAME/2 + 2]; /* temp store for encoded data */
void *st;
void *dec;
SpeexBits bits;
spx_int32_t tmp;
unsigned long bitCount=0;
spx_int32_t skip_group_delay;
SpeexCallback callback;
/* C54xx defaults to max wait states, even for parts like C5416 with
larger internal memory. Need to force the wait state register to zero */
#ifdef CONFIG_TI_C54X
asm(" STM #0,SWWSR");
#endif
#ifdef CHECK_RESULT
sigpow = 0;
errpow = 0;
#endif
#ifdef MANUAL_ALLOC
spxGlobalHeapPtr = spxHeap;
spxGlobalHeapEnd = spxHeap + sizeof(spxHeap);
spxGlobalScratchPtr = spxScratch;
spxGlobalScratchEnd = spxScratch + sizeof(spxScratch);
#endif
st = speex_encoder_init(&speex_nb_mode);
#ifdef MANUAL_ALLOC
spxGlobalScratchPtr = spxScratch; /* Reuse scratch for decoder */
#endif
dec = speex_decoder_init(&speex_nb_mode);
callback.callback_id = SPEEX_INBAND_CHAR;
callback.func = speex_std_char_handler;
callback.data = stderr;
speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
callback.callback_id = SPEEX_INBAND_MODE_REQUEST;
callback.func = speex_std_mode_request_handler;
callback.data = st;
speex_decoder_ctl(dec, SPEEX_SET_HANDLER, &callback);
tmp=0;
speex_decoder_ctl(dec, SPEEX_SET_ENH, &tmp);
tmp=0;
speex_encoder_ctl(st, SPEEX_SET_VBR, &tmp);
tmp=TESTENC_QUALITY;
speex_encoder_ctl(st, SPEEX_SET_QUALITY, &tmp);
tmp=1; /* Lowest */
speex_encoder_ctl(st, SPEEX_SET_COMPLEXITY, &tmp);
#ifdef DISABLE_HIGHPASS
/* Turn this off if you want to measure SNR (on by default) */
tmp=0;
speex_encoder_ctl(st, SPEEX_SET_HIGHPASS, &tmp);
speex_decoder_ctl(dec, SPEEX_SET_HIGHPASS, &tmp);
#endif
speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &skip_group_delay);
speex_decoder_ctl(dec, SPEEX_GET_LOOKAHEAD, &tmp);
skip_group_delay += tmp;
fprintf (stderr, "decoder lookahead = %ld\n", skip_group_delay);
#ifdef DECODE_ONLY
bitsFile = "c:\\speextrunktest\\samples\\malebitsin.dat";
fbits = fopen(bitsFile, "rb");
#else
bitsFile = "c:\\speextrunktest\\samples\\malebits5x.dat";
fbits = fopen(bitsFile, "wb");
#endif
#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
inFile = "c:\\speextrunktest\\samples\\male.snd";
fin = fopen(inFile, "rb");
#endif
outFile = "c:\\speextrunktest\\samples\\maleout5x.snd";
fout = fopen(outFile, "wb+");
speex_bits_init(&bits);
#ifndef DECODE_ONLY
while (!feof(fin))
{
fread(inout_byte, 2, FRAME_SIZE, fin);
byte2word(inout_byte, in_short, FRAME_SIZE); /* C5x has 16-bit char */
if (feof(fin))
break;
speex_bits_reset(&bits);
speex_encode_int(st, in_short, &bits);
nbChars = speex_bits_write(&bits, cbits,
sizeof(cbits)*BYTES_PER_CHAR) /BYTES_PER_CHAR;
bitCount+=bits.nbBits;
word2byte((short *) cbits, inout_byte, nbChars);
fwrite(inout_byte, 2, nbChars, fbits);
speex_bits_rewind(&bits);
#else /* DECODE_ONLY */
while (!feof(fbits))
{
fread(inout_byte, 1, TESTENC_BYTES_PER_FRAME, fbits);
if (feof(fbits))
break;
byte2word(inout_byte, (short *)cbits, TESTENC_BYTES_PER_FRAME/2);
speex_bits_read_from(&bits, cbits, TESTENC_BYTES_PER_FRAME);
bitCount+=160;
#endif
speex_decode_int(dec, &bits, out_short);
speex_bits_reset(&bits);
word2byte(&out_short[skip_group_delay], inout_byte, FRAME_SIZE-skip_group_delay);
fwrite(inout_byte, 2, FRAME_SIZE-skip_group_delay, fout);
skip_group_delay = 0;
#if 1
fprintf (stderr, "Bits so far: %lu \n", bitCount);
#endif
}
fprintf (stderr, "Total encoded size: %lu bits\n", bitCount);
speex_encoder_destroy(st);
speex_decoder_destroy(dec);
#ifdef CHECK_RESULT
rewind(fin);
rewind(fout);
while ( FRAME_SIZE == fread(inout_byte, 2, FRAME_SIZE, fin))
{
float s=0, e=0;
byte2word(inout_byte, in_short, FRAME_SIZE);
fread(inout_byte, 2, FRAME_SIZE, fout);
byte2word(inout_byte, out_short, FRAME_SIZE);
for (i=0;i<FRAME_SIZE;++i) {
s += (float)in_short[i] * in_short[i];
e += ((float)in_short[i]-out_short[i]) * ((float)in_short[i]-out_short[i]);
}
seg_snr += 10*log10((s+160)/(e+160));
sigpow += s;
errpow += e;
snr_frames++;
}
snr = 10 * log10( sigpow / errpow );
seg_snr /= snr_frames;
fprintf(stderr,"SNR = %f\nsegmental SNR = %f\n",snr, seg_snr);
#ifdef FIXED_DEBUG
printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames));
#endif
#endif /* CHECK_RESULT */
#if !defined(DECODE_ONLY) || defined(CHECK_RESULT)
fclose(fin);
#endif
fclose(fout);
fclose(fbits);
}