/* Start: bn_error.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include "mycrypt.h" #include static const struct { int code; char *msg; } msgs[] = { { MP_OKAY, "Successful" }, { MP_MEM, "Out of heap" }, { MP_VAL, "Value out of range" } }; /* return a char * string for a given code */ char *mp_error_to_string(int code) { int x; /* scan the lookup table for the given message */ for (x = 0; x < (int)(sizeof(msgs) / sizeof(msgs[0])); x++) { if (msgs[x].code == code) { return msgs[x].msg; } } /* generic reply for invalid code */ return "Invalid error code"; } /* End: bn_error.c */ /* Start: bn_fast_mp_invmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes the modular inverse via binary extended euclidean algorithm, * that is c = 1/a mod b * * Based on mp_invmod except this is optimized for the case where b is * odd as per HAC Note 14.64 on pp. 610 */ int fast_mp_invmod (mp_int * a, mp_int * b, mp_int * c) { mp_int x, y, u, v, B, D; int res, neg; /* 2. [modified] if a,b are both even then return an error! * * That is if gcd(a,b) = 2**k * q then obviously there is no inverse. */ if (mp_iseven (a) == 1 && mp_iseven (b) == 1) { return MP_VAL; } /* init all our temps */ if ((res = mp_init_multi(&x, &y, &u, &v, &B, &D, NULL)) != MP_OKAY) { return res; } /* x == modulus, y == value to invert */ if ((res = mp_copy (b, &x)) != MP_OKAY) { goto __ERR; } /* we need y = |a| */ if ((res = mp_abs (a, &y)) != MP_OKAY) { goto __ERR; } /* 3. u=x, v=y, A=1, B=0, C=0,D=1 */ if ((res = mp_copy (&x, &u)) != MP_OKAY) { goto __ERR; } if ((res = mp_copy (&y, &v)) != MP_OKAY) { goto __ERR; } mp_set (&D, 1); top: /* 4. while u is even do */ while (mp_iseven (&u) == 1) { /* 4.1 u = u/2 */ if ((res = mp_div_2 (&u, &u)) != MP_OKAY) { goto __ERR; } /* 4.2 if B is odd then */ if (mp_isodd (&B) == 1) { if ((res = mp_sub (&B, &x, &B)) != MP_OKAY) { goto __ERR; } } /* B = B/2 */ if ((res = mp_div_2 (&B, &B)) != MP_OKAY) { goto __ERR; } } /* 5. while v is even do */ while (mp_iseven (&v) == 1) { /* 5.1 v = v/2 */ if ((res = mp_div_2 (&v, &v)) != MP_OKAY) { goto __ERR; } /* 5.2 if D is odd then */ if (mp_isodd (&D) == 1) { /* D = (D-x)/2 */ if ((res = mp_sub (&D, &x, &D)) != MP_OKAY) { goto __ERR; } } /* D = D/2 */ if ((res = mp_div_2 (&D, &D)) != MP_OKAY) { goto __ERR; } } /* 6. if u >= v then */ if (mp_cmp (&u, &v) != MP_LT) { /* u = u - v, B = B - D */ if ((res = mp_sub (&u, &v, &u)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&B, &D, &B)) != MP_OKAY) { goto __ERR; } } else { /* v - v - u, D = D - B */ if ((res = mp_sub (&v, &u, &v)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&D, &B, &D)) != MP_OKAY) { goto __ERR; } } /* if not zero goto step 4 */ if (mp_iszero (&u) == 0) { goto top; } /* now a = C, b = D, gcd == g*v */ /* if v != 1 then there is no inverse */ if (mp_cmp_d (&v, 1) != MP_EQ) { res = MP_VAL; goto __ERR; } /* b is now the inverse */ neg = a->sign; while (D.sign == MP_NEG) { if ((res = mp_add (&D, b, &D)) != MP_OKAY) { goto __ERR; } } mp_exch (&D, c); c->sign = neg; res = MP_OKAY; __ERR:mp_clear_multi (&x, &y, &u, &v, &B, &D, NULL); return res; } /* End: bn_fast_mp_invmod.c */ /* Start: bn_fast_mp_montgomery_reduce.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes xR**-1 == x (mod N) via Montgomery Reduction * * This is an optimized implementation of mp_montgomery_reduce * which uses the comba method to quickly calculate the columns of the * reduction. * * Based on Algorithm 14.32 on pp.601 of HAC. */ int fast_mp_montgomery_reduce (mp_int * x, mp_int * n, mp_digit rho) { int ix, res, olduse; mp_word W[MP_WARRAY]; /* get old used count */ olduse = x->used; /* grow a as required */ if (x->alloc < n->used + 1) { if ((res = mp_grow (x, n->used + 1)) != MP_OKAY) { return res; } } /* first we have to get the digits of the input into * an array of double precision words W[...] */ { register mp_word *_W; register mp_digit *tmpx; /* alias for the W[] array */ _W = W; /* alias for the digits of x*/ tmpx = x->dp; /* copy the digits of a into W[0..a->used-1] */ for (ix = 0; ix < x->used; ix++) { *_W++ = *tmpx++; } /* zero the high words of W[a->used..m->used*2] */ for (; ix < n->used * 2 + 1; ix++) { *_W++ = 0; } } /* now we proceed to zero successive digits * from the least significant upwards */ for (ix = 0; ix < n->used; ix++) { /* mu = ai * m' mod b * * We avoid a double precision multiplication (which isn't required) * by casting the value down to a mp_digit. Note this requires * that W[ix-1] have the carry cleared (see after the inner loop) */ register mp_digit mu; mu = ((W[ix] & MP_MASK) * rho) & MP_MASK; /* a = a + mu * m * b**i * * This is computed in place and on the fly. The multiplication * by b**i is handled by offseting which columns the results * are added to. * * Note the comba method normally doesn't handle carries in the * inner loop In this case we fix the carry from the previous * column since the Montgomery reduction requires digits of the * result (so far) [see above] to work. This is * handled by fixing up one carry after the inner loop. The * carry fixups are done in order so after these loops the * first m->used words of W[] have the carries fixed */ { register int iy; register mp_digit *tmpn; register mp_word *_W; /* alias for the digits of the modulus */ tmpn = n->dp; /* Alias for the columns set by an offset of ix */ _W = W + ix; /* inner loop */ for (iy = 0; iy < n->used; iy++) { *_W++ += ((mp_word)mu) * ((mp_word)*tmpn++); } } /* now fix carry for next digit, W[ix+1] */ W[ix + 1] += W[ix] >> ((mp_word) DIGIT_BIT); } /* now we have to propagate the carries and * shift the words downward [all those least * significant digits we zeroed]. */ { register mp_digit *tmpx; register mp_word *_W, *_W1; /* nox fix rest of carries */ /* alias for current word */ _W1 = W + ix; /* alias for next word, where the carry goes */ _W = W + ++ix; for (; ix <= n->used * 2 + 1; ix++) { *_W++ += *_W1++ >> ((mp_word) DIGIT_BIT); } /* copy out, A = A/b**n * * The result is A/b**n but instead of converting from an * array of mp_word to mp_digit than calling mp_rshd * we just copy them in the right order */ /* alias for destination word */ tmpx = x->dp; /* alias for shifted double precision result */ _W = W + n->used; for (ix = 0; ix < n->used + 1; ix++) { *tmpx++ = (mp_digit)(*_W++ & ((mp_word) MP_MASK)); } /* zero oldused digits, if the input a was larger than * m->used+1 we'll have to clear the digits */ for (; ix < olduse; ix++) { *tmpx++ = 0; } } /* set the max used and clamp */ x->used = n->used + 1; mp_clamp (x); /* if A >= m then A = A - m */ if (mp_cmp_mag (x, n) != MP_LT) { return s_mp_sub (x, n, x); } return MP_OKAY; } /* End: bn_fast_mp_montgomery_reduce.c */ /* Start: bn_fast_s_mp_mul_digs.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* Fast (comba) multiplier * * This is the fast column-array [comba] multiplier. It is * designed to compute the columns of the product first * then handle the carries afterwards. This has the effect * of making the nested loops that compute the columns very * simple and schedulable on super-scalar processors. * * This has been modified to produce a variable number of * digits of output so if say only a half-product is required * you don't have to compute the upper half (a feature * required for fast Barrett reduction). * * Based on Algorithm 14.12 on pp.595 of HAC. * */ int fast_s_mp_mul_digs (mp_int * a, mp_int * b, mp_int * c, int digs) { int olduse, res, pa, ix; mp_word W[MP_WARRAY]; /* grow the destination as required */ if (c->alloc < digs) { if ((res = mp_grow (c, digs)) != MP_OKAY) { return res; } } /* clear temp buf (the columns) */ memset (W, 0, sizeof (mp_word) * digs); /* calculate the columns */ pa = a->used; for (ix = 0; ix < pa; ix++) { /* this multiplier has been modified to allow you to * control how many digits of output are produced. * So at most we want to make upto "digs" digits of output. * * this adds products to distinct columns (at ix+iy) of W * note that each step through the loop is not dependent on * the previous which means the compiler can easily unroll * the loop without scheduling problems */ { register mp_digit tmpx, *tmpy; register mp_word *_W; register int iy, pb; /* alias for the the word on the left e.g. A[ix] * A[iy] */ tmpx = a->dp[ix]; /* alias for the right side */ tmpy = b->dp; /* alias for the columns, each step through the loop adds a new term to each column */ _W = W + ix; /* the number of digits is limited by their placement. E.g. we avoid multiplying digits that will end up above the # of digits of precision requested */ pb = MIN (b->used, digs - ix); for (iy = 0; iy < pb; iy++) { *_W++ += ((mp_word)tmpx) * ((mp_word)*tmpy++); } } } /* setup dest */ olduse = c->used; c->used = digs; { register mp_digit *tmpc; /* At this point W[] contains the sums of each column. To get the * correct result we must take the extra bits from each column and * carry them down * * Note that while this adds extra code to the multiplier it * saves time since the carry propagation is removed from the * above nested loop.This has the effect of reducing the work * from N*(N+N*c)==N**2 + c*N**2 to N**2 + N*c where c is the * cost of the shifting. On very small numbers this is slower * but on most cryptographic size numbers it is faster. * * In this particular implementation we feed the carries from * behind which means when the loop terminates we still have one * last digit to copy */ tmpc = c->dp; for (ix = 1; ix < digs; ix++) { /* forward the carry from the previous temp */ W[ix] += (W[ix - 1] >> ((mp_word) DIGIT_BIT)); /* now extract the previous digit [below the carry] */ *tmpc++ = (mp_digit) (W[ix - 1] & ((mp_word) MP_MASK)); } /* fetch the last digit */ *tmpc++ = (mp_digit) (W[digs - 1] & ((mp_word) MP_MASK)); /* clear unused digits [that existed in the old copy of c] */ for (; ix < olduse; ix++) { *tmpc++ = 0; } } mp_clamp (c); return MP_OKAY; } /* End: bn_fast_s_mp_mul_digs.c */ /* Start: bn_fast_s_mp_mul_high_digs.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* this is a modified version of fast_s_mp_mul_digs that only produces * output digits *above* digs. See the comments for fast_s_mp_mul_digs * to see how it works. * * This is used in the Barrett reduction since for one of the multiplications * only the higher digits were needed. This essentially halves the work. * * Based on Algorithm 14.12 on pp.595 of HAC. */ int fast_s_mp_mul_high_digs (mp_int * a, mp_int * b, mp_int * c, int digs) { int oldused, newused, res, pa, pb, ix; mp_word W[MP_WARRAY]; /* calculate size of product and allocate more space if required */ newused = a->used + b->used + 1; if (c->alloc < newused) { if ((res = mp_grow (c, newused)) != MP_OKAY) { return res; } } /* like the other comba method we compute the columns first */ pa = a->used; pb = b->used; memset (W + digs, 0, (pa + pb + 1 - digs) * sizeof (mp_word)); for (ix = 0; ix < pa; ix++) { { register mp_digit tmpx, *tmpy; register int iy; register mp_word *_W; /* work todo, that is we only calculate digits that are at "digs" or above */ iy = digs - ix; /* copy of word on the left of A[ix] * B[iy] */ tmpx = a->dp[ix]; /* alias for right side */ tmpy = b->dp + iy; /* alias for the columns of output. Offset to be equal to or above the * smallest digit place requested */ _W = W + digs; /* skip cases below zero where ix > digs */ if (iy < 0) { iy = abs(iy); tmpy += iy; _W += iy; iy = 0; } /* compute column products for digits above the minimum */ for (; iy < pb; iy++) { *_W++ += ((mp_word) tmpx) * ((mp_word)*tmpy++); } } } /* setup dest */ oldused = c->used; c->used = newused; /* now convert the array W downto what we need * * See comments in bn_fast_s_mp_mul_digs.c */ for (ix = digs + 1; ix < newused; ix++) { W[ix] += (W[ix - 1] >> ((mp_word) DIGIT_BIT)); c->dp[ix - 1] = (mp_digit) (W[ix - 1] & ((mp_word) MP_MASK)); } c->dp[newused - 1] = (mp_digit) (W[newused - 1] & ((mp_word) MP_MASK)); for (; ix < oldused; ix++) { c->dp[ix] = 0; } mp_clamp (c); return MP_OKAY; } /* End: bn_fast_s_mp_mul_high_digs.c */ /* Start: bn_fast_s_mp_sqr.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* fast squaring * * This is the comba method where the columns of the product * are computed first then the carries are computed. This * has the effect of making a very simple inner loop that * is executed the most * * W2 represents the outer products and W the inner. * * A further optimizations is made because the inner * products are of the form "A * B * 2". The *2 part does * not need to be computed until the end which is good * because 64-bit shifts are slow! * * Based on Algorithm 14.16 on pp.597 of HAC. * */ int fast_s_mp_sqr (mp_int * a, mp_int * b) { int olduse, newused, res, ix, pa; mp_word W2[MP_WARRAY], W[MP_WARRAY]; /* calculate size of product and allocate as required */ pa = a->used; newused = pa + pa + 1; if (b->alloc < newused) { if ((res = mp_grow (b, newused)) != MP_OKAY) { return res; } } /* zero temp buffer (columns) * Note that there are two buffers. Since squaring requires * a outer and inner product and the inner product requires * computing a product and doubling it (a relatively expensive * op to perform n**2 times if you don't have to) the inner and * outer products are computed in different buffers. This way * the inner product can be doubled using n doublings instead of * n**2 */ memset (W, 0, newused * sizeof (mp_word)); memset (W2, 0, newused * sizeof (mp_word)); /* This computes the inner product. To simplify the inner N**2 loop * the multiplication by two is done afterwards in the N loop. */ for (ix = 0; ix < pa; ix++) { /* compute the outer product * * Note that every outer product is computed * for a particular column only once which means that * there is no need todo a double precision addition * into the W2[] array. */ W2[ix + ix] = ((mp_word)a->dp[ix]) * ((mp_word)a->dp[ix]); { register mp_digit tmpx, *tmpy; register mp_word *_W; register int iy; /* copy of left side */ tmpx = a->dp[ix]; /* alias for right side */ tmpy = a->dp + (ix + 1); /* the column to store the result in */ _W = W + (ix + ix + 1); /* inner products */ for (iy = ix + 1; iy < pa; iy++) { *_W++ += ((mp_word)tmpx) * ((mp_word)*tmpy++); } } } /* setup dest */ olduse = b->used; b->used = newused; /* now compute digits * * We have to double the inner product sums, add in the * outer product sums, propagate carries and convert * to single precision. */ { register mp_digit *tmpb; /* double first value, since the inner products are * half of what they should be */ W[0] += W[0] + W2[0]; tmpb = b->dp; for (ix = 1; ix < newused; ix++) { /* double/add next digit */ W[ix] += W[ix] + W2[ix]; /* propagate carry forwards [from the previous digit] */ W[ix] = W[ix] + (W[ix - 1] >> ((mp_word) DIGIT_BIT)); /* store the current digit now that the carry isn't * needed */ *tmpb++ = (mp_digit) (W[ix - 1] & ((mp_word) MP_MASK)); } /* set the last value. Note even if the carry is zero * this is required since the next step will not zero * it if b originally had a value at b->dp[2*a.used] */ *tmpb++ = (mp_digit) (W[(newused) - 1] & ((mp_word) MP_MASK)); /* clear high digits of b if there were any originally */ for (; ix < olduse; ix++) { *tmpb++ = 0; } } mp_clamp (b); return MP_OKAY; } /* End: bn_fast_s_mp_sqr.c */ /* Start: bn_mp_2expt.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes a = 2**b * * Simple algorithm which zeroes the int, grows it then just sets one bit * as required. */ int mp_2expt (mp_int * a, int b) { int res; /* zero a as per default */ mp_zero (a); /* grow a to accomodate the single bit */ if ((res = mp_grow (a, b / DIGIT_BIT + 1)) != MP_OKAY) { return res; } /* set the used count of where the bit will go */ a->used = b / DIGIT_BIT + 1; /* put the single bit in its place */ a->dp[b / DIGIT_BIT] = 1 << (b % DIGIT_BIT); return MP_OKAY; } /* End: bn_mp_2expt.c */ /* Start: bn_mp_abs.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* b = |a| * * Simple function copies the input and fixes the sign to positive */ int mp_abs (mp_int * a, mp_int * b) { int res; /* copy a to b */ if (a != b) { if ((res = mp_copy (a, b)) != MP_OKAY) { return res; } } /* force the sign of b to positive */ b->sign = MP_ZPOS; return MP_OKAY; } /* End: bn_mp_abs.c */ /* Start: bn_mp_add.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* high level addition (handles signs) */ int mp_add (mp_int * a, mp_int * b, mp_int * c) { int sa, sb, res; /* get sign of both inputs */ sa = a->sign; sb = b->sign; /* handle two cases, not four */ if (sa == sb) { /* both positive or both negative */ /* add their magnitudes, copy the sign */ c->sign = sa; res = s_mp_add (a, b, c); } else { /* one positive, the other negative */ /* subtract the one with the greater magnitude from */ /* the one of the lesser magnitude. The result gets */ /* the sign of the one with the greater magnitude. */ if (mp_cmp_mag (a, b) == MP_LT) { c->sign = sb; res = s_mp_sub (b, a, c); } else { c->sign = sa; res = s_mp_sub (a, b, c); } } return res; } /* End: bn_mp_add.c */ /* Start: bn_mp_add_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* single digit addition */ int mp_add_d (mp_int * a, mp_digit b, mp_int * c) { int res, ix, oldused; mp_digit *tmpa, *tmpc, mu; /* grow c as required */ if (c->alloc < a->used + 1) { if ((res = mp_grow(c, a->used + 1)) != MP_OKAY) { return res; } } /* if a is negative and |a| >= b, call c = |a| - b */ if (a->sign == MP_NEG && (a->used > 1 || a->dp[0] >= b)) { /* temporarily fix sign of a */ a->sign = MP_ZPOS; /* c = |a| - b */ res = mp_sub_d(a, b, c); /* fix sign */ a->sign = c->sign = MP_NEG; return res; } /* old number of used digits in c */ oldused = c->used; /* sign always positive */ c->sign = MP_ZPOS; /* source alias */ tmpa = a->dp; /* destination alias */ tmpc = c->dp; /* if a is positive */ if (a->sign == MP_ZPOS) { /* setup size */ c->used = a->used + 1; /* add digit, after this we're propagating * the carry. */ *tmpc = *tmpa++ + b; mu = *tmpc >> DIGIT_BIT; *tmpc++ &= MP_MASK; /* now handle rest of the digits */ for (ix = 1; ix < a->used; ix++) { *tmpc = *tmpa++ + mu; mu = *tmpc >> DIGIT_BIT; *tmpc++ &= MP_MASK; } /* set final carry */ ix++; *tmpc++ = mu; } else { /* a was negative and |a| < b */ c->used = 1; /* the result is a single digit */ if (a->used == 1) { *tmpc++ = b - a->dp[0]; } else { *tmpc++ = b; } /* setup count so the clearing of oldused * can fall through correctly */ ix = 1; } /* now zero to oldused */ while (ix++ < oldused) { *tmpc++ = 0; } mp_clamp(c); return MP_OKAY; } /* End: bn_mp_add_d.c */ /* Start: bn_mp_addmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* d = a + b (mod c) */ int mp_addmod (mp_int * a, mp_int * b, mp_int * c, mp_int * d) { int res; mp_int t; if ((res = mp_init (&t)) != MP_OKAY) { return res; } if ((res = mp_add (a, b, &t)) != MP_OKAY) { mp_clear (&t); return res; } res = mp_mod (&t, c, d); mp_clear (&t); return res; } /* End: bn_mp_addmod.c */ /* Start: bn_mp_and.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* AND two ints together */ int mp_and (mp_int * a, mp_int * b, mp_int * c) { int res, ix, px; mp_int t, *x; if (a->used > b->used) { if ((res = mp_init_copy (&t, a)) != MP_OKAY) { return res; } px = b->used; x = b; } else { if ((res = mp_init_copy (&t, b)) != MP_OKAY) { return res; } px = a->used; x = a; } for (ix = 0; ix < px; ix++) { t.dp[ix] &= x->dp[ix]; } /* zero digits above the last from the smallest mp_int */ for (; ix < t.used; ix++) { t.dp[ix] = 0; } mp_clamp (&t); mp_exch (c, &t); mp_clear (&t); return MP_OKAY; } /* End: bn_mp_and.c */ /* Start: bn_mp_clamp.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* trim unused digits * * This is used to ensure that leading zero digits are * trimed and the leading "used" digit will be non-zero * Typically very fast. Also fixes the sign if there * are no more leading digits */ void mp_clamp (mp_int * a) { /* decrease used while the most significant digit is * zero. */ while (a->used > 0 && a->dp[a->used - 1] == 0) { --(a->used); } /* reset the sign flag if used == 0 */ if (a->used == 0) { a->sign = MP_ZPOS; } } /* End: bn_mp_clamp.c */ /* Start: bn_mp_clear.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* clear one (frees) */ void mp_clear (mp_int * a) { /* only do anything if a hasn't been freed previously */ if (a->dp != NULL) { /* first zero the digits */ memset (a->dp, 0, sizeof (mp_digit) * a->used); /* free ram */ XFREE (a->dp); /* reset members to make debugging easier */ a->dp = NULL; a->alloc = a->used = 0; a->sign = MP_ZPOS; } } /* End: bn_mp_clear.c */ /* Start: bn_mp_clear_multi.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include #include void mp_clear_multi(mp_int *mp, ...) { mp_int* next_mp = mp; va_list args; va_start(args, mp); while (next_mp != NULL) { mp_clear(next_mp); next_mp = va_arg(args, mp_int*); } va_end(args); } /* End: bn_mp_clear_multi.c */ /* Start: bn_mp_cmp.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* compare two ints (signed)*/ int mp_cmp (mp_int * a, mp_int * b) { /* compare based on sign */ if (a->sign != b->sign) { if (a->sign == MP_NEG) { return MP_LT; } else { return MP_GT; } } /* compare digits */ if (a->sign == MP_NEG) { /* if negative compare opposite direction */ return mp_cmp_mag(b, a); } else { return mp_cmp_mag(a, b); } } /* End: bn_mp_cmp.c */ /* Start: bn_mp_cmp_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* compare a digit */ int mp_cmp_d (mp_int * a, mp_digit b) { /* compare based on sign */ if (a->sign == MP_NEG) { return MP_LT; } /* compare based on magnitude */ if (a->used > 1) { return MP_GT; } /* compare the only digit of a to b */ if (a->dp[0] > b) { return MP_GT; } else if (a->dp[0] < b) { return MP_LT; } else { return MP_EQ; } } /* End: bn_mp_cmp_d.c */ /* Start: bn_mp_cmp_mag.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* compare maginitude of two ints (unsigned) */ int mp_cmp_mag (mp_int * a, mp_int * b) { int n; mp_digit *tmpa, *tmpb; /* compare based on # of non-zero digits */ if (a->used > b->used) { return MP_GT; } if (a->used < b->used) { return MP_LT; } /* alias for a */ tmpa = a->dp + (a->used - 1); /* alias for b */ tmpb = b->dp + (a->used - 1); /* compare based on digits */ for (n = 0; n < a->used; ++n, --tmpa, --tmpb) { if (*tmpa > *tmpb) { return MP_GT; } if (*tmpa < *tmpb) { return MP_LT; } } return MP_EQ; } /* End: bn_mp_cmp_mag.c */ /* Start: bn_mp_cnt_lsb.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* Counts the number of lsbs which are zero before the first zero bit */ int mp_cnt_lsb(mp_int *a) { int x; mp_digit q; /* easy out */ if (mp_iszero(a) == 1) { return 0; } /* scan lower digits until non-zero */ for (x = 0; x < a->used && a->dp[x] == 0; x++); q = a->dp[x]; x *= DIGIT_BIT; /* now scan this digit until a 1 is found */ while ((q & 1) == 0) { q >>= 1; x += 1; } return x; } /* End: bn_mp_cnt_lsb.c */ /* Start: bn_mp_copy.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* copy, b = a */ int mp_copy (mp_int * a, mp_int * b) { int res, n; /* if dst == src do nothing */ if (a == b) { return MP_OKAY; } /* grow dest */ if (b->alloc < a->used) { if ((res = mp_grow (b, a->used)) != MP_OKAY) { return res; } } /* zero b and copy the parameters over */ { register mp_digit *tmpa, *tmpb; /* pointer aliases */ /* source */ tmpa = a->dp; /* destination */ tmpb = b->dp; /* copy all the digits */ for (n = 0; n < a->used; n++) { *tmpb++ = *tmpa++; } /* clear high digits */ for (; n < b->used; n++) { *tmpb++ = 0; } } /* copy used count and sign */ b->used = a->used; b->sign = a->sign; return MP_OKAY; } /* End: bn_mp_copy.c */ /* Start: bn_mp_count_bits.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* returns the number of bits in an int */ int mp_count_bits (mp_int * a) { int r; mp_digit q; /* shortcut */ if (a->used == 0) { return 0; } /* get number of digits and add that */ r = (a->used - 1) * DIGIT_BIT; /* take the last digit and count the bits in it */ q = a->dp[a->used - 1]; while (q > ((mp_digit) 0)) { ++r; q >>= ((mp_digit) 1); } return r; } /* End: bn_mp_count_bits.c */ /* Start: bn_mp_div.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* integer signed division. * c*b + d == a [e.g. a/b, c=quotient, d=remainder] * HAC pp.598 Algorithm 14.20 * * Note that the description in HAC is horribly * incomplete. For example, it doesn't consider * the case where digits are removed from 'x' in * the inner loop. It also doesn't consider the * case that y has fewer than three digits, etc.. * * The overall algorithm is as described as * 14.20 from HAC but fixed to treat these cases. */ int mp_div (mp_int * a, mp_int * b, mp_int * c, mp_int * d) { mp_int q, x, y, t1, t2; int res, n, t, i, norm, neg; /* is divisor zero ? */ if (mp_iszero (b) == 1) { return MP_VAL; } /* if a < b then q=0, r = a */ if (mp_cmp_mag (a, b) == MP_LT) { if (d != NULL) { res = mp_copy (a, d); } else { res = MP_OKAY; } if (c != NULL) { mp_zero (c); } return res; } if ((res = mp_init_size (&q, a->used + 2)) != MP_OKAY) { return res; } q.used = a->used + 2; if ((res = mp_init (&t1)) != MP_OKAY) { goto __Q; } if ((res = mp_init (&t2)) != MP_OKAY) { goto __T1; } if ((res = mp_init_copy (&x, a)) != MP_OKAY) { goto __T2; } if ((res = mp_init_copy (&y, b)) != MP_OKAY) { goto __X; } /* fix the sign */ neg = (a->sign == b->sign) ? MP_ZPOS : MP_NEG; x.sign = y.sign = MP_ZPOS; /* normalize both x and y, ensure that y >= b/2, [b == 2**DIGIT_BIT] */ norm = mp_count_bits(&y) % DIGIT_BIT; if (norm < (int)(DIGIT_BIT-1)) { norm = (DIGIT_BIT-1) - norm; if ((res = mp_mul_2d (&x, norm, &x)) != MP_OKAY) { goto __Y; } if ((res = mp_mul_2d (&y, norm, &y)) != MP_OKAY) { goto __Y; } } else { norm = 0; } /* note hac does 0 based, so if used==5 then its 0,1,2,3,4, e.g. use 4 */ n = x.used - 1; t = y.used - 1; /* while (x >= y*b**n-t) do { q[n-t] += 1; x -= y*b**{n-t} } */ if ((res = mp_lshd (&y, n - t)) != MP_OKAY) { /* y = y*b**{n-t} */ goto __Y; } while (mp_cmp (&x, &y) != MP_LT) { ++(q.dp[n - t]); if ((res = mp_sub (&x, &y, &x)) != MP_OKAY) { goto __Y; } } /* reset y by shifting it back down */ mp_rshd (&y, n - t); /* step 3. for i from n down to (t + 1) */ for (i = n; i >= (t + 1); i--) { if (i > x.used) { continue; } /* step 3.1 if xi == yt then set q{i-t-1} to b-1, * otherwise set q{i-t-1} to (xi*b + x{i-1})/yt */ if (x.dp[i] == y.dp[t]) { q.dp[i - t - 1] = ((((mp_digit)1) << DIGIT_BIT) - 1); } else { mp_word tmp; tmp = ((mp_word) x.dp[i]) << ((mp_word) DIGIT_BIT); tmp |= ((mp_word) x.dp[i - 1]); tmp /= ((mp_word) y.dp[t]); if (tmp > (mp_word) MP_MASK) tmp = MP_MASK; q.dp[i - t - 1] = (mp_digit) (tmp & (mp_word) (MP_MASK)); } /* while (q{i-t-1} * (yt * b + y{t-1})) > xi * b**2 + xi-1 * b + xi-2 do q{i-t-1} -= 1; */ q.dp[i - t - 1] = (q.dp[i - t - 1] + 1) & MP_MASK; do { q.dp[i - t - 1] = (q.dp[i - t - 1] - 1) & MP_MASK; /* find left hand */ mp_zero (&t1); t1.dp[0] = (t - 1 < 0) ? 0 : y.dp[t - 1]; t1.dp[1] = y.dp[t]; t1.used = 2; if ((res = mp_mul_d (&t1, q.dp[i - t - 1], &t1)) != MP_OKAY) { goto __Y; } /* find right hand */ t2.dp[0] = (i - 2 < 0) ? 0 : x.dp[i - 2]; t2.dp[1] = (i - 1 < 0) ? 0 : x.dp[i - 1]; t2.dp[2] = x.dp[i]; t2.used = 3; } while (mp_cmp_mag(&t1, &t2) == MP_GT); /* step 3.3 x = x - q{i-t-1} * y * b**{i-t-1} */ if ((res = mp_mul_d (&y, q.dp[i - t - 1], &t1)) != MP_OKAY) { goto __Y; } if ((res = mp_lshd (&t1, i - t - 1)) != MP_OKAY) { goto __Y; } if ((res = mp_sub (&x, &t1, &x)) != MP_OKAY) { goto __Y; } /* if x < 0 then { x = x + y*b**{i-t-1}; q{i-t-1} -= 1; } */ if (x.sign == MP_NEG) { if ((res = mp_copy (&y, &t1)) != MP_OKAY) { goto __Y; } if ((res = mp_lshd (&t1, i - t - 1)) != MP_OKAY) { goto __Y; } if ((res = mp_add (&x, &t1, &x)) != MP_OKAY) { goto __Y; } q.dp[i - t - 1] = (q.dp[i - t - 1] - 1UL) & MP_MASK; } } /* now q is the quotient and x is the remainder * [which we have to normalize] */ /* get sign before writing to c */ x.sign = a->sign; if (c != NULL) { mp_clamp (&q); mp_exch (&q, c); c->sign = neg; } if (d != NULL) { mp_div_2d (&x, norm, &x, NULL); mp_exch (&x, d); } res = MP_OKAY; __Y:mp_clear (&y); __X:mp_clear (&x); __T2:mp_clear (&t2); __T1:mp_clear (&t1); __Q:mp_clear (&q); return res; } /* End: bn_mp_div.c */ /* Start: bn_mp_div_2.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* b = a/2 */ int mp_div_2 (mp_int * a, mp_int * b) { int x, res, oldused; /* copy */ if (b->alloc < a->used) { if ((res = mp_grow (b, a->used)) != MP_OKAY) { return res; } } oldused = b->used; b->used = a->used; { register mp_digit r, rr, *tmpa, *tmpb; /* source alias */ tmpa = a->dp + b->used - 1; /* dest alias */ tmpb = b->dp + b->used - 1; /* carry */ r = 0; for (x = b->used - 1; x >= 0; x--) { /* get the carry for the next iteration */ rr = *tmpa & 1; /* shift the current digit, add in carry and store */ *tmpb-- = (*tmpa-- >> 1) | (r << (DIGIT_BIT - 1)); /* forward carry to next iteration */ r = rr; } /* zero excess digits */ tmpb = b->dp + b->used; for (x = b->used; x < oldused; x++) { *tmpb++ = 0; } } b->sign = a->sign; mp_clamp (b); return MP_OKAY; } /* End: bn_mp_div_2.c */ /* Start: bn_mp_div_2d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* shift right by a certain bit count (store quotient in c, optional remainder in d) */ int mp_div_2d (mp_int * a, int b, mp_int * c, mp_int * d) { mp_digit D, r, rr; int x, res; mp_int t; /* if the shift count is <= 0 then we do no work */ if (b <= 0) { res = mp_copy (a, c); if (d != NULL) { mp_zero (d); } return res; } if ((res = mp_init (&t)) != MP_OKAY) { return res; } /* get the remainder */ if (d != NULL) { if ((res = mp_mod_2d (a, b, &t)) != MP_OKAY) { mp_clear (&t); return res; } } /* copy */ if ((res = mp_copy (a, c)) != MP_OKAY) { mp_clear (&t); return res; } /* shift by as many digits in the bit count */ if (b >= (int)DIGIT_BIT) { mp_rshd (c, b / DIGIT_BIT); } /* shift any bit count < DIGIT_BIT */ D = (mp_digit) (b % DIGIT_BIT); if (D != 0) { register mp_digit *tmpc, mask, shift; /* mask */ mask = (((mp_digit)1) << D) - 1; /* shift for lsb */ shift = DIGIT_BIT - D; /* alias */ tmpc = c->dp + (c->used - 1); /* carry */ r = 0; for (x = c->used - 1; x >= 0; x--) { /* get the lower bits of this word in a temp */ rr = *tmpc & mask; /* shift the current word and mix in the carry bits from the previous word */ *tmpc = (*tmpc >> D) | (r << shift); --tmpc; /* set the carry to the carry bits of the current word found above */ r = rr; } } mp_clamp (c); if (d != NULL) { mp_exch (&t, d); } mp_clear (&t); return MP_OKAY; } /* End: bn_mp_div_2d.c */ /* Start: bn_mp_div_3.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* divide by three (based on routine from MPI and the GMP manual) */ int mp_div_3 (mp_int * a, mp_int *c, mp_digit * d) { mp_int q; mp_word w, t; mp_digit b; int res, ix; /* b = 2**DIGIT_BIT / 3 */ b = (((mp_word)1) << ((mp_word)DIGIT_BIT)) / ((mp_word)3); if ((res = mp_init_size(&q, a->used)) != MP_OKAY) { return res; } q.used = a->used; q.sign = a->sign; w = 0; for (ix = a->used - 1; ix >= 0; ix--) { w = (w << ((mp_word)DIGIT_BIT)) | ((mp_word)a->dp[ix]); if (w >= 3) { /* multiply w by [1/3] */ t = (w * ((mp_word)b)) >> ((mp_word)DIGIT_BIT); /* now subtract 3 * [w/3] from w, to get the remainder */ w -= (t << ((mp_word)1)) + t; /* fixup the remainder as required since * the optimization is not exact. */ while (w >= 3) { t += 1; w -= 3; } } else { t = 0; } q.dp[ix] = (mp_digit)t; } /* [optional] store the remainder */ if (d != NULL) { *d = (mp_digit)w; } /* [optional] store the quotient */ if (c != NULL) { mp_clamp(&q); mp_exch(&q, c); } mp_clear(&q); return res; } /* End: bn_mp_div_3.c */ /* Start: bn_mp_div_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include static int s_is_power_of_two(mp_digit b, int *p) { int x; for (x = 1; x < DIGIT_BIT; x++) { if (b == (((mp_digit)1)<dp[0] & ((1<used)) != MP_OKAY) { return res; } q.used = a->used; q.sign = a->sign; w = 0; for (ix = a->used - 1; ix >= 0; ix--) { w = (w << ((mp_word)DIGIT_BIT)) | ((mp_word)a->dp[ix]); if (w >= b) { t = (mp_digit)(w / b); w = w % b; } else { t = 0; } q.dp[ix] = (mp_digit)t; } if (d != NULL) { *d = (mp_digit)w; } if (c != NULL) { mp_clamp(&q); mp_exch(&q, c); } mp_clear(&q); return res; } /* End: bn_mp_div_d.c */ /* Start: bn_mp_dr_is_modulus.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* determines if a number is a valid DR modulus */ int mp_dr_is_modulus(mp_int *a) { int ix; /* must be at least two digits */ if (a->used < 2) { return 0; } /* must be of the form b**k - a [a <= b] so all * but the first digit must be equal to -1 (mod b). */ for (ix = 1; ix < a->used; ix++) { if (a->dp[ix] != MP_MASK) { return 0; } } return 1; } /* End: bn_mp_dr_is_modulus.c */ /* Start: bn_mp_dr_reduce.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* reduce "x" in place modulo "n" using the Diminished Radix algorithm. * * Based on algorithm from the paper * * "Generating Efficient Primes for Discrete Log Cryptosystems" * Chae Hoon Lim, Pil Loong Lee, * POSTECH Information Research Laboratories * * The modulus must be of a special format [see manual] * * Has been modified to use algorithm 7.10 from the LTM book instead * * Input x must be in the range 0 <= x <= (n-1)^2 */ int mp_dr_reduce (mp_int * x, mp_int * n, mp_digit k) { int err, i, m; mp_word r; mp_digit mu, *tmpx1, *tmpx2; /* m = digits in modulus */ m = n->used; /* ensure that "x" has at least 2m digits */ if (x->alloc < m + m) { if ((err = mp_grow (x, m + m)) != MP_OKAY) { return err; } } /* top of loop, this is where the code resumes if * another reduction pass is required. */ top: /* aliases for digits */ /* alias for lower half of x */ tmpx1 = x->dp; /* alias for upper half of x, or x/B**m */ tmpx2 = x->dp + m; /* set carry to zero */ mu = 0; /* compute (x mod B**m) + k * [x/B**m] inline and inplace */ for (i = 0; i < m; i++) { r = ((mp_word)*tmpx2++) * ((mp_word)k) + *tmpx1 + mu; *tmpx1++ = (mp_digit)(r & MP_MASK); mu = (mp_digit)(r >> ((mp_word)DIGIT_BIT)); } /* set final carry */ *tmpx1++ = mu; /* zero words above m */ for (i = m + 1; i < x->used; i++) { *tmpx1++ = 0; } /* clamp, sub and return */ mp_clamp (x); /* if x >= n then subtract and reduce again * Each successive "recursion" makes the input smaller and smaller. */ if (mp_cmp_mag (x, n) != MP_LT) { s_mp_sub(x, n, x); goto top; } return MP_OKAY; } /* End: bn_mp_dr_reduce.c */ /* Start: bn_mp_dr_setup.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* determines the setup value */ void mp_dr_setup(mp_int *a, mp_digit *d) { /* the casts are required if DIGIT_BIT is one less than * the number of bits in a mp_digit [e.g. DIGIT_BIT==31] */ *d = (mp_digit)((((mp_word)1) << ((mp_word)DIGIT_BIT)) - ((mp_word)a->dp[0])); } /* End: bn_mp_dr_setup.c */ /* Start: bn_mp_exch.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* swap the elements of two integers, for cases where you can't simply swap the * mp_int pointers around */ void mp_exch (mp_int * a, mp_int * b) { mp_int t; t = *a; *a = *b; *b = t; } /* End: bn_mp_exch.c */ /* Start: bn_mp_expt_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* calculate c = a**b using a square-multiply algorithm */ int mp_expt_d (mp_int * a, mp_digit b, mp_int * c) { int res, x; mp_int g; if ((res = mp_init_copy (&g, a)) != MP_OKAY) { return res; } /* set initial result */ mp_set (c, 1); for (x = 0; x < (int) DIGIT_BIT; x++) { /* square */ if ((res = mp_sqr (c, c)) != MP_OKAY) { mp_clear (&g); return res; } /* if the bit is set multiply */ if ((b & (mp_digit) (((mp_digit)1) << (DIGIT_BIT - 1))) != 0) { if ((res = mp_mul (c, &g, c)) != MP_OKAY) { mp_clear (&g); return res; } } /* shift to next bit */ b <<= 1; } mp_clear (&g); return MP_OKAY; } /* End: bn_mp_expt_d.c */ /* Start: bn_mp_exptmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* this is a shell function that calls either the normal or Montgomery * exptmod functions. Originally the call to the montgomery code was * embedded in the normal function but that wasted alot of stack space * for nothing (since 99% of the time the Montgomery code would be called) */ int mp_exptmod (mp_int * G, mp_int * X, mp_int * P, mp_int * Y) { int dr; /* modulus P must be positive */ if (P->sign == MP_NEG) { return MP_VAL; } /* if exponent X is negative we have to recurse */ if (X->sign == MP_NEG) { mp_int tmpG, tmpX; int err; /* first compute 1/G mod P */ if ((err = mp_init(&tmpG)) != MP_OKAY) { return err; } if ((err = mp_invmod(G, P, &tmpG)) != MP_OKAY) { mp_clear(&tmpG); return err; } /* now get |X| */ if ((err = mp_init(&tmpX)) != MP_OKAY) { mp_clear(&tmpG); return err; } if ((err = mp_abs(X, &tmpX)) != MP_OKAY) { mp_clear_multi(&tmpG, &tmpX, NULL); return err; } /* and now compute (1/G)**|X| instead of G**X [X < 0] */ err = mp_exptmod(&tmpG, &tmpX, P, Y); mp_clear_multi(&tmpG, &tmpX, NULL); return err; } /* is it a DR modulus? */ dr = mp_dr_is_modulus(P); /* if not, is it a uDR modulus? */ if (dr == 0) { dr = mp_reduce_is_2k(P) << 1; } /* if the modulus is odd or dr != 0 use the fast method */ if (mp_isodd (P) == 1 || dr != 0) { return mp_exptmod_fast (G, X, P, Y, dr); } else { /* otherwise use the generic Barrett reduction technique */ return s_mp_exptmod (G, X, P, Y); } } /* End: bn_mp_exptmod.c */ /* Start: bn_mp_exptmod_fast.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes Y == G^X mod P, HAC pp.616, Algorithm 14.85 * * Uses a left-to-right k-ary sliding window to compute the modular exponentiation. * The value of k changes based on the size of the exponent. * * Uses Montgomery or Diminished Radix reduction [whichever appropriate] */ #ifdef MP_LOW_MEM #define TAB_SIZE 32 #else #define TAB_SIZE 256 #endif int mp_exptmod_fast (mp_int * G, mp_int * X, mp_int * P, mp_int * Y, int redmode) { mp_int M[TAB_SIZE], res; mp_digit buf, mp; int err, bitbuf, bitcpy, bitcnt, mode, digidx, x, y, winsize; /* use a pointer to the reduction algorithm. This allows us to use * one of many reduction algorithms without modding the guts of * the code with if statements everywhere. */ int (*redux)(mp_int*,mp_int*,mp_digit); /* find window size */ x = mp_count_bits (X); if (x <= 7) { winsize = 2; } else if (x <= 36) { winsize = 3; } else if (x <= 140) { winsize = 4; } else if (x <= 450) { winsize = 5; } else if (x <= 1303) { winsize = 6; } else if (x <= 3529) { winsize = 7; } else { winsize = 8; } #ifdef MP_LOW_MEM if (winsize > 5) { winsize = 5; } #endif /* init M array */ /* init first cell */ if ((err = mp_init(&M[1])) != MP_OKAY) { return err; } /* now init the second half of the array */ for (x = 1<<(winsize-1); x < (1 << winsize); x++) { if ((err = mp_init(&M[x])) != MP_OKAY) { for (y = 1<<(winsize-1); y < x; y++) { mp_clear (&M[y]); } mp_clear(&M[1]); return err; } } /* determine and setup reduction code */ if (redmode == 0) { /* now setup montgomery */ if ((err = mp_montgomery_setup (P, &mp)) != MP_OKAY) { goto __M; } /* automatically pick the comba one if available (saves quite a few calls/ifs) */ if (((P->used * 2 + 1) < MP_WARRAY) && P->used < (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) { redux = fast_mp_montgomery_reduce; } else { /* use slower baseline Montgomery method */ redux = mp_montgomery_reduce; } } else if (redmode == 1) { /* setup DR reduction for moduli of the form B**k - b */ mp_dr_setup(P, &mp); redux = mp_dr_reduce; } else { /* setup DR reduction for moduli of the form 2**k - b */ if ((err = mp_reduce_2k_setup(P, &mp)) != MP_OKAY) { goto __M; } redux = mp_reduce_2k; } /* setup result */ if ((err = mp_init (&res)) != MP_OKAY) { goto __M; } /* create M table * * The M table contains powers of the input base, e.g. M[x] = G^x mod P * * The first half of the table is not computed though accept for M[0] and M[1] */ if (redmode == 0) { /* now we need R mod m */ if ((err = mp_montgomery_calc_normalization (&res, P)) != MP_OKAY) { goto __RES; } /* now set M[1] to G * R mod m */ if ((err = mp_mulmod (G, &res, P, &M[1])) != MP_OKAY) { goto __RES; } } else { mp_set(&res, 1); if ((err = mp_mod(G, P, &M[1])) != MP_OKAY) { goto __RES; } } /* compute the value at M[1<<(winsize-1)] by squaring M[1] (winsize-1) times */ if ((err = mp_copy (&M[1], &M[1 << (winsize - 1)])) != MP_OKAY) { goto __RES; } for (x = 0; x < (winsize - 1); x++) { if ((err = mp_sqr (&M[1 << (winsize - 1)], &M[1 << (winsize - 1)])) != MP_OKAY) { goto __RES; } if ((err = redux (&M[1 << (winsize - 1)], P, mp)) != MP_OKAY) { goto __RES; } } /* create upper table */ for (x = (1 << (winsize - 1)) + 1; x < (1 << winsize); x++) { if ((err = mp_mul (&M[x - 1], &M[1], &M[x])) != MP_OKAY) { goto __RES; } if ((err = redux (&M[x], P, mp)) != MP_OKAY) { goto __RES; } } /* set initial mode and bit cnt */ mode = 0; bitcnt = 1; buf = 0; digidx = X->used - 1; bitcpy = 0; bitbuf = 0; for (;;) { /* grab next digit as required */ if (--bitcnt == 0) { /* if digidx == -1 we are out of digits so break */ if (digidx == -1) { break; } /* read next digit and reset bitcnt */ buf = X->dp[digidx--]; bitcnt = (int)DIGIT_BIT; } /* grab the next msb from the exponent */ y = (mp_digit)(buf >> (DIGIT_BIT - 1)) & 1; buf <<= (mp_digit)1; /* if the bit is zero and mode == 0 then we ignore it * These represent the leading zero bits before the first 1 bit * in the exponent. Technically this opt is not required but it * does lower the # of trivial squaring/reductions used */ if (mode == 0 && y == 0) { continue; } /* if the bit is zero and mode == 1 then we square */ if (mode == 1 && y == 0) { if ((err = mp_sqr (&res, &res)) != MP_OKAY) { goto __RES; } if ((err = redux (&res, P, mp)) != MP_OKAY) { goto __RES; } continue; } /* else we add it to the window */ bitbuf |= (y << (winsize - ++bitcpy)); mode = 2; if (bitcpy == winsize) { /* ok window is filled so square as required and multiply */ /* square first */ for (x = 0; x < winsize; x++) { if ((err = mp_sqr (&res, &res)) != MP_OKAY) { goto __RES; } if ((err = redux (&res, P, mp)) != MP_OKAY) { goto __RES; } } /* then multiply */ if ((err = mp_mul (&res, &M[bitbuf], &res)) != MP_OKAY) { goto __RES; } if ((err = redux (&res, P, mp)) != MP_OKAY) { goto __RES; } /* empty window and reset */ bitcpy = 0; bitbuf = 0; mode = 1; } } /* if bits remain then square/multiply */ if (mode == 2 && bitcpy > 0) { /* square then multiply if the bit is set */ for (x = 0; x < bitcpy; x++) { if ((err = mp_sqr (&res, &res)) != MP_OKAY) { goto __RES; } if ((err = redux (&res, P, mp)) != MP_OKAY) { goto __RES; } /* get next bit of the window */ bitbuf <<= 1; if ((bitbuf & (1 << winsize)) != 0) { /* then multiply */ if ((err = mp_mul (&res, &M[1], &res)) != MP_OKAY) { goto __RES; } if ((err = redux (&res, P, mp)) != MP_OKAY) { goto __RES; } } } } if (redmode == 0) { /* fixup result if Montgomery reduction is used * recall that any value in a Montgomery system is * actually multiplied by R mod n. So we have * to reduce one more time to cancel out the factor * of R. */ if ((err = mp_montgomery_reduce (&res, P, mp)) != MP_OKAY) { goto __RES; } } /* swap res with Y */ mp_exch (&res, Y); err = MP_OKAY; __RES:mp_clear (&res); __M: mp_clear(&M[1]); for (x = 1<<(winsize-1); x < (1 << winsize); x++) { mp_clear (&M[x]); } return err; } /* End: bn_mp_exptmod_fast.c */ /* Start: bn_mp_fread.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* read a bigint from a file stream in ASCII */ int mp_fread(mp_int *a, int radix, FILE *stream) { int err, ch, neg, y; /* clear a */ mp_zero(a); /* if first digit is - then set negative */ ch = fgetc(stream); if (ch == '-') { neg = MP_NEG; ch = fgetc(stream); } else { neg = MP_ZPOS; } for (;;) { /* find y in the radix map */ for (y = 0; y < radix; y++) { if (mp_s_rmap[y] == ch) { break; } } if (y == radix) { break; } /* shift up and add */ if ((err = mp_mul_d(a, radix, a)) != MP_OKAY) { return err; } if ((err = mp_add_d(a, y, a)) != MP_OKAY) { return err; } ch = fgetc(stream); } if (mp_cmp_d(a, 0) != MP_EQ) { a->sign = neg; } return MP_OKAY; } /* End: bn_mp_fread.c */ /* Start: bn_mp_fwrite.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include int mp_fwrite(mp_int *a, int radix, FILE *stream) { char *buf; int err, len, x; len = mp_radix_size(a, radix); if (len == 0) { return MP_VAL; } buf = XMALLOC(len); if (buf == NULL) { return MP_MEM; } if ((err = mp_toradix(a, buf, radix)) != MP_OKAY) { free(buf); return err; } for (x = 0; x < len; x++) { if (fputc(buf[x], stream) == EOF) { free(buf); return MP_VAL; } } free(buf); return MP_OKAY; } /* End: bn_mp_fwrite.c */ /* Start: bn_mp_gcd.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* Greatest Common Divisor using the binary method */ int mp_gcd (mp_int * a, mp_int * b, mp_int * c) { mp_int u, v; int k, u_lsb, v_lsb, res; /* either zero than gcd is the largest */ if (mp_iszero (a) == 1 && mp_iszero (b) == 0) { return mp_abs (b, c); } if (mp_iszero (a) == 0 && mp_iszero (b) == 1) { return mp_abs (a, c); } /* optimized. At this point if a == 0 then * b must equal zero too */ if (mp_iszero (a) == 1) { mp_zero(c); return MP_OKAY; } /* get copies of a and b we can modify */ if ((res = mp_init_copy (&u, a)) != MP_OKAY) { return res; } if ((res = mp_init_copy (&v, b)) != MP_OKAY) { goto __U; } /* must be positive for the remainder of the algorithm */ u.sign = v.sign = MP_ZPOS; /* B1. Find the common power of two for u and v */ u_lsb = mp_cnt_lsb(&u); v_lsb = mp_cnt_lsb(&v); k = MIN(u_lsb, v_lsb); if (k > 0) { /* divide the power of two out */ if ((res = mp_div_2d(&u, k, &u, NULL)) != MP_OKAY) { goto __V; } if ((res = mp_div_2d(&v, k, &v, NULL)) != MP_OKAY) { goto __V; } } /* divide any remaining factors of two out */ if (u_lsb != k) { if ((res = mp_div_2d(&u, u_lsb - k, &u, NULL)) != MP_OKAY) { goto __V; } } if (v_lsb != k) { if ((res = mp_div_2d(&v, v_lsb - k, &v, NULL)) != MP_OKAY) { goto __V; } } while (mp_iszero(&v) == 0) { /* make sure v is the largest */ if (mp_cmp_mag(&u, &v) == MP_GT) { /* swap u and v to make sure v is >= u */ mp_exch(&u, &v); } /* subtract smallest from largest */ if ((res = s_mp_sub(&v, &u, &v)) != MP_OKAY) { goto __V; } /* Divide out all factors of two */ if ((res = mp_div_2d(&v, mp_cnt_lsb(&v), &v, NULL)) != MP_OKAY) { goto __V; } } /* multiply by 2**k which we divided out at the beginning */ if ((res = mp_mul_2d (&u, k, c)) != MP_OKAY) { goto __V; } c->sign = MP_ZPOS; res = MP_OKAY; __V:mp_clear (&u); __U:mp_clear (&v); return res; } /* End: bn_mp_gcd.c */ /* Start: bn_mp_grow.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* grow as required */ int mp_grow (mp_int * a, int size) { int i; /* if the alloc size is smaller alloc more ram */ if (a->alloc < size) { /* ensure there are always at least MP_PREC digits extra on top */ size += (MP_PREC * 2) - (size % MP_PREC); a->dp = OPT_CAST XREALLOC (a->dp, sizeof (mp_digit) * size); if (a->dp == NULL) { return MP_MEM; } /* zero excess digits */ i = a->alloc; a->alloc = size; for (; i < a->alloc; i++) { a->dp[i] = 0; } } return MP_OKAY; } /* End: bn_mp_grow.c */ /* Start: bn_mp_init.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* init a new bigint */ int mp_init (mp_int * a) { /* allocate memory required and clear it */ a->dp = OPT_CAST calloc (sizeof (mp_digit), MP_PREC); if (a->dp == NULL) { return MP_MEM; } /* set the used to zero, allocated digits to the default precision * and sign to positive */ a->used = 0; a->alloc = MP_PREC; a->sign = MP_ZPOS; return MP_OKAY; } /* End: bn_mp_init.c */ /* Start: bn_mp_init_copy.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* creates "a" then copies b into it */ int mp_init_copy (mp_int * a, mp_int * b) { int res; if ((res = mp_init (a)) != MP_OKAY) { return res; } return mp_copy (b, a); } /* End: bn_mp_init_copy.c */ /* Start: bn_mp_init_multi.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include #include int mp_init_multi(mp_int *mp, ...) { mp_err res = MP_OKAY; /* Assume ok until proven otherwise */ int n = 0; /* Number of ok inits */ mp_int* cur_arg = mp; va_list args; va_start(args, mp); /* init args to next argument from caller */ while (cur_arg != NULL) { if (mp_init(cur_arg) != MP_OKAY) { /* Oops - error! Back-track and mp_clear what we already succeeded in init-ing, then return error. */ va_list clean_args; /* end the current list */ va_end(args); /* now start cleaning up */ cur_arg = mp; va_start(clean_args, mp); while (n--) { mp_clear(cur_arg); cur_arg = va_arg(clean_args, mp_int*); } va_end(clean_args); res = MP_MEM; break; } n++; cur_arg = va_arg(args, mp_int*); } va_end(args); return res; /* Assumed ok, if error flagged above. */ } /* End: bn_mp_init_multi.c */ /* Start: bn_mp_init_size.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* init an mp_init for a given size */ int mp_init_size (mp_int * a, int size) { /* pad size so there are always extra digits */ size += (MP_PREC * 2) - (size % MP_PREC); /* alloc mem */ a->dp = OPT_CAST calloc (sizeof (mp_digit), size); if (a->dp == NULL) { return MP_MEM; } a->used = 0; a->alloc = size; a->sign = MP_ZPOS; return MP_OKAY; } /* End: bn_mp_init_size.c */ /* Start: bn_mp_invmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* hac 14.61, pp608 */ int mp_invmod (mp_int * a, mp_int * b, mp_int * c) { mp_int x, y, u, v, A, B, C, D; int res; /* b cannot be negative */ if (b->sign == MP_NEG || mp_iszero(b) == 1) { return MP_VAL; } /* if the modulus is odd we can use a faster routine instead */ if (mp_isodd (b) == 1) { return fast_mp_invmod (a, b, c); } /* init temps */ if ((res = mp_init_multi(&x, &y, &u, &v, &A, &B, &C, &D, NULL)) != MP_OKAY) { return res; } /* x = a, y = b */ if ((res = mp_copy (a, &x)) != MP_OKAY) { goto __ERR; } if ((res = mp_copy (b, &y)) != MP_OKAY) { goto __ERR; } /* 2. [modified] if x,y are both even then return an error! */ if (mp_iseven (&x) == 1 && mp_iseven (&y) == 1) { res = MP_VAL; goto __ERR; } /* 3. u=x, v=y, A=1, B=0, C=0,D=1 */ if ((res = mp_copy (&x, &u)) != MP_OKAY) { goto __ERR; } if ((res = mp_copy (&y, &v)) != MP_OKAY) { goto __ERR; } mp_set (&A, 1); mp_set (&D, 1); top: /* 4. while u is even do */ while (mp_iseven (&u) == 1) { /* 4.1 u = u/2 */ if ((res = mp_div_2 (&u, &u)) != MP_OKAY) { goto __ERR; } /* 4.2 if A or B is odd then */ if (mp_isodd (&A) == 1 || mp_isodd (&B) == 1) { /* A = (A+y)/2, B = (B-x)/2 */ if ((res = mp_add (&A, &y, &A)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&B, &x, &B)) != MP_OKAY) { goto __ERR; } } /* A = A/2, B = B/2 */ if ((res = mp_div_2 (&A, &A)) != MP_OKAY) { goto __ERR; } if ((res = mp_div_2 (&B, &B)) != MP_OKAY) { goto __ERR; } } /* 5. while v is even do */ while (mp_iseven (&v) == 1) { /* 5.1 v = v/2 */ if ((res = mp_div_2 (&v, &v)) != MP_OKAY) { goto __ERR; } /* 5.2 if C or D is odd then */ if (mp_isodd (&C) == 1 || mp_isodd (&D) == 1) { /* C = (C+y)/2, D = (D-x)/2 */ if ((res = mp_add (&C, &y, &C)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&D, &x, &D)) != MP_OKAY) { goto __ERR; } } /* C = C/2, D = D/2 */ if ((res = mp_div_2 (&C, &C)) != MP_OKAY) { goto __ERR; } if ((res = mp_div_2 (&D, &D)) != MP_OKAY) { goto __ERR; } } /* 6. if u >= v then */ if (mp_cmp (&u, &v) != MP_LT) { /* u = u - v, A = A - C, B = B - D */ if ((res = mp_sub (&u, &v, &u)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&A, &C, &A)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&B, &D, &B)) != MP_OKAY) { goto __ERR; } } else { /* v - v - u, C = C - A, D = D - B */ if ((res = mp_sub (&v, &u, &v)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&C, &A, &C)) != MP_OKAY) { goto __ERR; } if ((res = mp_sub (&D, &B, &D)) != MP_OKAY) { goto __ERR; } } /* if not zero goto step 4 */ if (mp_iszero (&u) == 0) goto top; /* now a = C, b = D, gcd == g*v */ /* if v != 1 then there is no inverse */ if (mp_cmp_d (&v, 1) != MP_EQ) { res = MP_VAL; goto __ERR; } /* if its too low */ while (mp_cmp_d(&C, 0) == MP_LT) { if ((res = mp_add(&C, b, &C)) != MP_OKAY) { goto __ERR; } } /* too big */ while (mp_cmp_mag(&C, b) != MP_LT) { if ((res = mp_sub(&C, b, &C)) != MP_OKAY) { goto __ERR; } } /* C is now the inverse */ mp_exch (&C, c); res = MP_OKAY; __ERR:mp_clear_multi (&x, &y, &u, &v, &A, &B, &C, &D, NULL); return res; } /* End: bn_mp_invmod.c */ /* Start: bn_mp_jacobi.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes the jacobi c = (a | n) (or Legendre if n is prime) * HAC pp. 73 Algorithm 2.149 */ int mp_jacobi (mp_int * a, mp_int * p, int *c) { mp_int a1, p1; int k, s, r, res; mp_digit residue; /* if p <= 0 return MP_VAL */ if (mp_cmp_d(p, 0) != MP_GT) { return MP_VAL; } /* step 1. if a == 0, return 0 */ if (mp_iszero (a) == 1) { *c = 0; return MP_OKAY; } /* step 2. if a == 1, return 1 */ if (mp_cmp_d (a, 1) == MP_EQ) { *c = 1; return MP_OKAY; } /* default */ s = 0; /* step 3. write a = a1 * 2**k */ if ((res = mp_init_copy (&a1, a)) != MP_OKAY) { return res; } if ((res = mp_init (&p1)) != MP_OKAY) { goto __A1; } /* divide out larger power of two */ k = mp_cnt_lsb(&a1); if ((res = mp_div_2d(&a1, k, &a1, NULL)) != MP_OKAY) { goto __P1; } /* step 4. if e is even set s=1 */ if ((k & 1) == 0) { s = 1; } else { /* else set s=1 if p = 1/7 (mod 8) or s=-1 if p = 3/5 (mod 8) */ residue = p->dp[0] & 7; if (residue == 1 || residue == 7) { s = 1; } else if (residue == 3 || residue == 5) { s = -1; } } /* step 5. if p == 3 (mod 4) *and* a1 == 3 (mod 4) then s = -s */ if ( ((p->dp[0] & 3) == 3) && ((a1.dp[0] & 3) == 3)) { s = -s; } /* if a1 == 1 we're done */ if (mp_cmp_d (&a1, 1) == MP_EQ) { *c = s; } else { /* n1 = n mod a1 */ if ((res = mp_mod (p, &a1, &p1)) != MP_OKAY) { goto __P1; } if ((res = mp_jacobi (&p1, &a1, &r)) != MP_OKAY) { goto __P1; } *c = s * r; } /* done */ res = MP_OKAY; __P1:mp_clear (&p1); __A1:mp_clear (&a1); return res; } /* End: bn_mp_jacobi.c */ /* Start: bn_mp_karatsuba_mul.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* c = |a| * |b| using Karatsuba Multiplication using * three half size multiplications * * Let B represent the radix [e.g. 2**DIGIT_BIT] and * let n represent half of the number of digits in * the min(a,b) * * a = a1 * B**n + a0 * b = b1 * B**n + b0 * * Then, a * b => a1b1 * B**2n + ((a1 - a0)(b1 - b0) + a0b0 + a1b1) * B + a0b0 * * Note that a1b1 and a0b0 are used twice and only need to be * computed once. So in total three half size (half # of * digit) multiplications are performed, a0b0, a1b1 and * (a1-b1)(a0-b0) * * Note that a multiplication of half the digits requires * 1/4th the number of single precision multiplications so in * total after one call 25% of the single precision multiplications * are saved. Note also that the call to mp_mul can end up back * in this function if the a0, a1, b0, or b1 are above the threshold. * This is known as divide-and-conquer and leads to the famous * O(N**lg(3)) or O(N**1.584) work which is asymptopically lower than * the standard O(N**2) that the baseline/comba methods use. * Generally though the overhead of this method doesn't pay off * until a certain size (N ~ 80) is reached. */ int mp_karatsuba_mul (mp_int * a, mp_int * b, mp_int * c) { mp_int x0, x1, y0, y1, t1, x0y0, x1y1; int B, err; /* default the return code to an error */ err = MP_MEM; /* min # of digits */ B = MIN (a->used, b->used); /* now divide in two */ B = B / 2; /* init copy all the temps */ if (mp_init_size (&x0, B) != MP_OKAY) goto ERR; if (mp_init_size (&x1, a->used - B) != MP_OKAY) goto X0; if (mp_init_size (&y0, B) != MP_OKAY) goto X1; if (mp_init_size (&y1, b->used - B) != MP_OKAY) goto Y0; /* init temps */ if (mp_init_size (&t1, B * 2) != MP_OKAY) goto Y1; if (mp_init_size (&x0y0, B * 2) != MP_OKAY) goto T1; if (mp_init_size (&x1y1, B * 2) != MP_OKAY) goto X0Y0; /* now shift the digits */ x0.sign = x1.sign = a->sign; y0.sign = y1.sign = b->sign; x0.used = y0.used = B; x1.used = a->used - B; y1.used = b->used - B; { register int x; register mp_digit *tmpa, *tmpb, *tmpx, *tmpy; /* we copy the digits directly instead of using higher level functions * since we also need to shift the digits */ tmpa = a->dp; tmpb = b->dp; tmpx = x0.dp; tmpy = y0.dp; for (x = 0; x < B; x++) { *tmpx++ = *tmpa++; *tmpy++ = *tmpb++; } tmpx = x1.dp; for (x = B; x < a->used; x++) { *tmpx++ = *tmpa++; } tmpy = y1.dp; for (x = B; x < b->used; x++) { *tmpy++ = *tmpb++; } } /* only need to clamp the lower words since by definition the * upper words x1/y1 must have a known number of digits */ mp_clamp (&x0); mp_clamp (&y0); /* now calc the products x0y0 and x1y1 */ /* after this x0 is no longer required, free temp [x0==t2]! */ if (mp_mul (&x0, &y0, &x0y0) != MP_OKAY) goto X1Y1; /* x0y0 = x0*y0 */ if (mp_mul (&x1, &y1, &x1y1) != MP_OKAY) goto X1Y1; /* x1y1 = x1*y1 */ /* now calc x1-x0 and y1-y0 */ if (mp_sub (&x1, &x0, &t1) != MP_OKAY) goto X1Y1; /* t1 = x1 - x0 */ if (mp_sub (&y1, &y0, &x0) != MP_OKAY) goto X1Y1; /* t2 = y1 - y0 */ if (mp_mul (&t1, &x0, &t1) != MP_OKAY) goto X1Y1; /* t1 = (x1 - x0) * (y1 - y0) */ /* add x0y0 */ if (mp_add (&x0y0, &x1y1, &x0) != MP_OKAY) goto X1Y1; /* t2 = x0y0 + x1y1 */ if (mp_sub (&x0, &t1, &t1) != MP_OKAY) goto X1Y1; /* t1 = x0y0 + x1y1 - (x1-x0)*(y1-y0) */ /* shift by B */ if (mp_lshd (&t1, B) != MP_OKAY) goto X1Y1; /* t1 = (x0y0 + x1y1 - (x1-x0)*(y1-y0))< /* Karatsuba squaring, computes b = a*a using three * half size squarings * * See comments of mp_karatsuba_mul for details. It * is essentially the same algorithm but merely * tuned to perform recursive squarings. */ int mp_karatsuba_sqr (mp_int * a, mp_int * b) { mp_int x0, x1, t1, t2, x0x0, x1x1; int B, err; err = MP_MEM; /* min # of digits */ B = a->used; /* now divide in two */ B = B / 2; /* init copy all the temps */ if (mp_init_size (&x0, B) != MP_OKAY) goto ERR; if (mp_init_size (&x1, a->used - B) != MP_OKAY) goto X0; /* init temps */ if (mp_init_size (&t1, a->used * 2) != MP_OKAY) goto X1; if (mp_init_size (&t2, a->used * 2) != MP_OKAY) goto T1; if (mp_init_size (&x0x0, B * 2) != MP_OKAY) goto T2; if (mp_init_size (&x1x1, (a->used - B) * 2) != MP_OKAY) goto X0X0; { register int x; register mp_digit *dst, *src; src = a->dp; /* now shift the digits */ dst = x0.dp; for (x = 0; x < B; x++) { *dst++ = *src++; } dst = x1.dp; for (x = B; x < a->used; x++) { *dst++ = *src++; } } x0.used = B; x1.used = a->used - B; mp_clamp (&x0); /* now calc the products x0*x0 and x1*x1 */ if (mp_sqr (&x0, &x0x0) != MP_OKAY) goto X1X1; /* x0x0 = x0*x0 */ if (mp_sqr (&x1, &x1x1) != MP_OKAY) goto X1X1; /* x1x1 = x1*x1 */ /* now calc (x1-x0)**2 */ if (mp_sub (&x1, &x0, &t1) != MP_OKAY) goto X1X1; /* t1 = x1 - x0 */ if (mp_sqr (&t1, &t1) != MP_OKAY) goto X1X1; /* t1 = (x1 - x0) * (x1 - x0) */ /* add x0y0 */ if (s_mp_add (&x0x0, &x1x1, &t2) != MP_OKAY) goto X1X1; /* t2 = x0x0 + x1x1 */ if (mp_sub (&t2, &t1, &t1) != MP_OKAY) goto X1X1; /* t1 = x0x0 + x1x1 - (x1-x0)*(x1-x0) */ /* shift by B */ if (mp_lshd (&t1, B) != MP_OKAY) goto X1X1; /* t1 = (x0x0 + x1x1 - (x1-x0)*(x1-x0))< /* computes least common multiple as |a*b|/(a, b) */ int mp_lcm (mp_int * a, mp_int * b, mp_int * c) { int res; mp_int t1, t2; if ((res = mp_init_multi (&t1, &t2, NULL)) != MP_OKAY) { return res; } /* t1 = get the GCD of the two inputs */ if ((res = mp_gcd (a, b, &t1)) != MP_OKAY) { goto __T; } /* divide the smallest by the GCD */ if (mp_cmp_mag(a, b) == MP_LT) { /* store quotient in t2 such that t2 * b is the LCM */ if ((res = mp_div(a, &t1, &t2, NULL)) != MP_OKAY) { goto __T; } res = mp_mul(b, &t2, c); } else { /* store quotient in t2 such that t2 * a is the LCM */ if ((res = mp_div(b, &t1, &t2, NULL)) != MP_OKAY) { goto __T; } res = mp_mul(a, &t2, c); } /* fix the sign to positive */ c->sign = MP_ZPOS; __T: mp_clear_multi (&t1, &t2, NULL); return res; } /* End: bn_mp_lcm.c */ /* Start: bn_mp_lshd.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* shift left a certain amount of digits */ int mp_lshd (mp_int * a, int b) { int x, res; /* if its less than zero return */ if (b <= 0) { return MP_OKAY; } /* grow to fit the new digits */ if (a->alloc < a->used + b) { if ((res = mp_grow (a, a->used + b)) != MP_OKAY) { return res; } } { register mp_digit *top, *bottom; /* increment the used by the shift amount then copy upwards */ a->used += b; /* top */ top = a->dp + a->used - 1; /* base */ bottom = a->dp + a->used - 1 - b; /* much like mp_rshd this is implemented using a sliding window * except the window goes the otherway around. Copying from * the bottom to the top. see bn_mp_rshd.c for more info. */ for (x = a->used - 1; x >= b; x--) { *top-- = *bottom--; } /* zero the lower digits */ top = a->dp; for (x = 0; x < b; x++) { *top++ = 0; } } return MP_OKAY; } /* End: bn_mp_lshd.c */ /* Start: bn_mp_mod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* c = a mod b, 0 <= c < b */ int mp_mod (mp_int * a, mp_int * b, mp_int * c) { mp_int t; int res; if ((res = mp_init (&t)) != MP_OKAY) { return res; } if ((res = mp_div (a, b, NULL, &t)) != MP_OKAY) { mp_clear (&t); return res; } if (t.sign == MP_NEG) { res = mp_add (b, &t, c); } else { res = MP_OKAY; mp_exch (&t, c); } mp_clear (&t); return res; } /* End: bn_mp_mod.c */ /* Start: bn_mp_mod_2d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* calc a value mod 2^b */ int mp_mod_2d (mp_int * a, int b, mp_int * c) { int x, res; /* if b is <= 0 then zero the int */ if (b <= 0) { mp_zero (c); return MP_OKAY; } /* if the modulus is larger than the value than return */ if (b > (int) (a->used * DIGIT_BIT)) { res = mp_copy (a, c); return res; } /* copy */ if ((res = mp_copy (a, c)) != MP_OKAY) { return res; } /* zero digits above the last digit of the modulus */ for (x = (b / DIGIT_BIT) + ((b % DIGIT_BIT) == 0 ? 0 : 1); x < c->used; x++) { c->dp[x] = 0; } /* clear the digit that is not completely outside/inside the modulus */ c->dp[b / DIGIT_BIT] &= (mp_digit) ((((mp_digit) 1) << (((mp_digit) b) % DIGIT_BIT)) - ((mp_digit) 1)); mp_clamp (c); return MP_OKAY; } /* End: bn_mp_mod_2d.c */ /* Start: bn_mp_mod_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include int mp_mod_d (mp_int * a, mp_digit b, mp_digit * c) { return mp_div_d(a, b, NULL, c); } /* End: bn_mp_mod_d.c */ /* Start: bn_mp_montgomery_calc_normalization.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* calculates a = B^n mod b for Montgomery reduction * Where B is the base [e.g. 2^DIGIT_BIT]. * B^n mod b is computed by first computing * A = B^(n-1) which doesn't require a reduction but a simple OR. * then C = A * B = B^n is computed by performing upto DIGIT_BIT * shifts with subtractions when the result is greater than b. * * The method is slightly modified to shift B unconditionally upto just under * the leading bit of b. This saves alot of multiple precision shifting. */ int mp_montgomery_calc_normalization (mp_int * a, mp_int * b) { int x, bits, res; /* how many bits of last digit does b use */ bits = mp_count_bits (b) % DIGIT_BIT; /* compute A = B^(n-1) * 2^(bits-1) */ if ((res = mp_2expt (a, (b->used - 1) * DIGIT_BIT + bits - 1)) != MP_OKAY) { return res; } /* now compute C = A * B mod b */ for (x = bits - 1; x < (int)DIGIT_BIT; x++) { if ((res = mp_mul_2 (a, a)) != MP_OKAY) { return res; } if (mp_cmp_mag (a, b) != MP_LT) { if ((res = s_mp_sub (a, b, a)) != MP_OKAY) { return res; } } } return MP_OKAY; } /* End: bn_mp_montgomery_calc_normalization.c */ /* Start: bn_mp_montgomery_reduce.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes xR**-1 == x (mod N) via Montgomery Reduction */ int mp_montgomery_reduce (mp_int * x, mp_int * n, mp_digit rho) { int ix, res, digs; mp_digit mu; /* can the fast reduction [comba] method be used? * * Note that unlike in mp_mul you're safely allowed *less* * than the available columns [255 per default] since carries * are fixed up in the inner loop. */ digs = n->used * 2 + 1; if ((digs < MP_WARRAY) && n->used < (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) { return fast_mp_montgomery_reduce (x, n, rho); } /* grow the input as required */ if (x->alloc < digs) { if ((res = mp_grow (x, digs)) != MP_OKAY) { return res; } } x->used = digs; for (ix = 0; ix < n->used; ix++) { /* mu = ai * rho mod b * * The value of rho must be precalculated via * bn_mp_montgomery_setup() such that * it equals -1/n0 mod b this allows the * following inner loop to reduce the * input one digit at a time */ mu = ((mp_word)x->dp[ix]) * ((mp_word)rho) & MP_MASK; /* a = a + mu * m * b**i */ { register int iy; register mp_digit *tmpn, *tmpx, u; register mp_word r; /* alias for digits of the modulus */ tmpn = n->dp; /* alias for the digits of x [the input] */ tmpx = x->dp + ix; /* set the carry to zero */ u = 0; /* Multiply and add in place */ for (iy = 0; iy < n->used; iy++) { /* compute product and sum */ r = ((mp_word)mu) * ((mp_word)*tmpn++) + ((mp_word) u) + ((mp_word) * tmpx); /* get carry */ u = (mp_digit)(r >> ((mp_word) DIGIT_BIT)); /* fix digit */ *tmpx++ = (mp_digit)(r & ((mp_word) MP_MASK)); } /* At this point the ix'th digit of x should be zero */ /* propagate carries upwards as required*/ while (u) { *tmpx += u; u = *tmpx >> DIGIT_BIT; *tmpx++ &= MP_MASK; } } } /* at this point the n.used'th least * significant digits of x are all zero * which means we can shift x to the * right by n.used digits and the * residue is unchanged. */ /* x = x/b**n.used */ mp_clamp(x); mp_rshd (x, n->used); /* if x >= n then x = x - n */ if (mp_cmp_mag (x, n) != MP_LT) { return s_mp_sub (x, n, x); } return MP_OKAY; } /* End: bn_mp_montgomery_reduce.c */ /* Start: bn_mp_montgomery_setup.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* setups the montgomery reduction stuff */ int mp_montgomery_setup (mp_int * n, mp_digit * rho) { mp_digit x, b; /* fast inversion mod 2**k * * Based on the fact that * * XA = 1 (mod 2**n) => (X(2-XA)) A = 1 (mod 2**2n) * => 2*X*A - X*X*A*A = 1 * => 2*(1) - (1) = 1 */ b = n->dp[0]; if ((b & 1) == 0) { return MP_VAL; } x = (((b + 2) & 4) << 1) + b; /* here x*a==1 mod 2**4 */ x *= 2 - b * x; /* here x*a==1 mod 2**8 */ #if !defined(MP_8BIT) x *= 2 - b * x; /* here x*a==1 mod 2**16 */ #endif #if defined(MP_64BIT) || !(defined(MP_8BIT) || defined(MP_16BIT)) x *= 2 - b * x; /* here x*a==1 mod 2**32 */ #endif #ifdef MP_64BIT x *= 2 - b * x; /* here x*a==1 mod 2**64 */ #endif /* rho = -1/m mod b */ *rho = (((mp_digit) 1 << ((mp_digit) DIGIT_BIT)) - x) & MP_MASK; return MP_OKAY; } /* End: bn_mp_montgomery_setup.c */ /* Start: bn_mp_mul.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* high level multiplication (handles sign) */ int mp_mul (mp_int * a, mp_int * b, mp_int * c) { int res, neg; neg = (a->sign == b->sign) ? MP_ZPOS : MP_NEG; /* use Toom-Cook? */ if (MIN (a->used, b->used) >= TOOM_MUL_CUTOFF) { res = mp_toom_mul(a, b, c); /* use Karatsuba? */ } else if (MIN (a->used, b->used) >= KARATSUBA_MUL_CUTOFF) { res = mp_karatsuba_mul (a, b, c); } else { /* can we use the fast multiplier? * * The fast multiplier can be used if the output will * have less than MP_WARRAY digits and the number of * digits won't affect carry propagation */ int digs = a->used + b->used + 1; if ((digs < MP_WARRAY) && MIN(a->used, b->used) <= (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) { res = fast_s_mp_mul_digs (a, b, c, digs); } else { res = s_mp_mul (a, b, c); } } c->sign = neg; return res; } /* End: bn_mp_mul.c */ /* Start: bn_mp_mul_2.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* b = a*2 */ int mp_mul_2 (mp_int * a, mp_int * b) { int x, res, oldused; /* grow to accomodate result */ if (b->alloc < a->used + 1) { if ((res = mp_grow (b, a->used + 1)) != MP_OKAY) { return res; } } oldused = b->used; b->used = a->used; { register mp_digit r, rr, *tmpa, *tmpb; /* alias for source */ tmpa = a->dp; /* alias for dest */ tmpb = b->dp; /* carry */ r = 0; for (x = 0; x < a->used; x++) { /* get what will be the *next* carry bit from the * MSB of the current digit */ rr = *tmpa >> ((mp_digit)(DIGIT_BIT - 1)); /* now shift up this digit, add in the carry [from the previous] */ *tmpb++ = ((*tmpa++ << ((mp_digit)1)) | r) & MP_MASK; /* copy the carry that would be from the source * digit into the next iteration */ r = rr; } /* new leading digit? */ if (r != 0) { /* add a MSB which is always 1 at this point */ *tmpb = 1; ++(b->used); } /* now zero any excess digits on the destination * that we didn't write to */ tmpb = b->dp + b->used; for (x = b->used; x < oldused; x++) { *tmpb++ = 0; } } b->sign = a->sign; return MP_OKAY; } /* End: bn_mp_mul_2.c */ /* Start: bn_mp_mul_2d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* shift left by a certain bit count */ int mp_mul_2d (mp_int * a, int b, mp_int * c) { mp_digit d; int res; /* copy */ if (a != c) { if ((res = mp_copy (a, c)) != MP_OKAY) { return res; } } if (c->alloc < (int)(c->used + b/DIGIT_BIT + 1)) { if ((res = mp_grow (c, c->used + b / DIGIT_BIT + 1)) != MP_OKAY) { return res; } } /* shift by as many digits in the bit count */ if (b >= (int)DIGIT_BIT) { if ((res = mp_lshd (c, b / DIGIT_BIT)) != MP_OKAY) { return res; } } /* shift any bit count < DIGIT_BIT */ d = (mp_digit) (b % DIGIT_BIT); if (d != 0) { register mp_digit *tmpc, shift, mask, r, rr; register int x; /* bitmask for carries */ mask = (((mp_digit)1) << d) - 1; /* shift for msbs */ shift = DIGIT_BIT - d; /* alias */ tmpc = c->dp; /* carry */ r = 0; for (x = 0; x < c->used; x++) { /* get the higher bits of the current word */ rr = (*tmpc >> shift) & mask; /* shift the current word and OR in the carry */ *tmpc = ((*tmpc << d) | r) & MP_MASK; ++tmpc; /* set the carry to the carry bits of the current word */ r = rr; } /* set final carry */ if (r != 0) { c->dp[(c->used)++] = r; } } mp_clamp (c); return MP_OKAY; } /* End: bn_mp_mul_2d.c */ /* Start: bn_mp_mul_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* multiply by a digit */ int mp_mul_d (mp_int * a, mp_digit b, mp_int * c) { int res, pa, olduse; /* make sure c is big enough to hold a*b */ pa = a->used; if (c->alloc < pa + 1) { if ((res = mp_grow (c, pa + 1)) != MP_OKAY) { return res; } } /* get the original destinations used count */ olduse = c->used; /* set the new temporary used count */ c->used = pa + 1; c->sign = a->sign; { register mp_digit u, *tmpa, *tmpc; register mp_word r; register int ix; /* alias for a->dp [source] */ tmpa = a->dp; /* alias for c->dp [dest] */ tmpc = c->dp; /* zero carry */ u = 0; for (ix = 0; ix < pa; ix++) { /* compute product and carry sum for this term */ r = ((mp_word) u) + ((mp_word)*tmpa++) * ((mp_word)b); /* mask off higher bits to get a single digit */ *tmpc++ = (mp_digit) (r & ((mp_word) MP_MASK)); /* send carry into next iteration */ u = (mp_digit) (r >> ((mp_word) DIGIT_BIT)); } /* store final carry [if any] */ *tmpc++ = u; /* now zero digits above the top */ for (; pa < olduse; pa++) { *tmpc++ = 0; } } mp_clamp (c); return MP_OKAY; } /* End: bn_mp_mul_d.c */ /* Start: bn_mp_mulmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* d = a * b (mod c) */ int mp_mulmod (mp_int * a, mp_int * b, mp_int * c, mp_int * d) { int res; mp_int t; if ((res = mp_init (&t)) != MP_OKAY) { return res; } if ((res = mp_mul (a, b, &t)) != MP_OKAY) { mp_clear (&t); return res; } res = mp_mod (&t, c, d); mp_clear (&t); return res; } /* End: bn_mp_mulmod.c */ /* Start: bn_mp_n_root.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* find the n'th root of an integer * * Result found such that (c)**b <= a and (c+1)**b > a * * This algorithm uses Newton's approximation * x[i+1] = x[i] - f(x[i])/f'(x[i]) * which will find the root in log(N) time where * each step involves a fair bit. This is not meant to * find huge roots [square and cube, etc]. */ int mp_n_root (mp_int * a, mp_digit b, mp_int * c) { mp_int t1, t2, t3; int res, neg; /* input must be positive if b is even */ if ((b & 1) == 0 && a->sign == MP_NEG) { return MP_VAL; } if ((res = mp_init (&t1)) != MP_OKAY) { return res; } if ((res = mp_init (&t2)) != MP_OKAY) { goto __T1; } if ((res = mp_init (&t3)) != MP_OKAY) { goto __T2; } /* if a is negative fudge the sign but keep track */ neg = a->sign; a->sign = MP_ZPOS; /* t2 = 2 */ mp_set (&t2, 2); do { /* t1 = t2 */ if ((res = mp_copy (&t2, &t1)) != MP_OKAY) { goto __T3; } /* t2 = t1 - ((t1**b - a) / (b * t1**(b-1))) */ /* t3 = t1**(b-1) */ if ((res = mp_expt_d (&t1, b - 1, &t3)) != MP_OKAY) { goto __T3; } /* numerator */ /* t2 = t1**b */ if ((res = mp_mul (&t3, &t1, &t2)) != MP_OKAY) { goto __T3; } /* t2 = t1**b - a */ if ((res = mp_sub (&t2, a, &t2)) != MP_OKAY) { goto __T3; } /* denominator */ /* t3 = t1**(b-1) * b */ if ((res = mp_mul_d (&t3, b, &t3)) != MP_OKAY) { goto __T3; } /* t3 = (t1**b - a)/(b * t1**(b-1)) */ if ((res = mp_div (&t2, &t3, &t3, NULL)) != MP_OKAY) { goto __T3; } if ((res = mp_sub (&t1, &t3, &t2)) != MP_OKAY) { goto __T3; } } while (mp_cmp (&t1, &t2) != MP_EQ); /* result can be off by a few so check */ for (;;) { if ((res = mp_expt_d (&t1, b, &t2)) != MP_OKAY) { goto __T3; } if (mp_cmp (&t2, a) == MP_GT) { if ((res = mp_sub_d (&t1, 1, &t1)) != MP_OKAY) { goto __T3; } } else { break; } } /* reset the sign of a first */ a->sign = neg; /* set the result */ mp_exch (&t1, c); /* set the sign of the result */ c->sign = neg; res = MP_OKAY; __T3:mp_clear (&t3); __T2:mp_clear (&t2); __T1:mp_clear (&t1); return res; } /* End: bn_mp_n_root.c */ /* Start: bn_mp_neg.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* b = -a */ int mp_neg (mp_int * a, mp_int * b) { int res; if ((res = mp_copy (a, b)) != MP_OKAY) { return res; } if (mp_iszero(b) != 1) { b->sign = (a->sign == MP_ZPOS) ? MP_NEG : MP_ZPOS; } return MP_OKAY; } /* End: bn_mp_neg.c */ /* Start: bn_mp_or.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* OR two ints together */ int mp_or (mp_int * a, mp_int * b, mp_int * c) { int res, ix, px; mp_int t, *x; if (a->used > b->used) { if ((res = mp_init_copy (&t, a)) != MP_OKAY) { return res; } px = b->used; x = b; } else { if ((res = mp_init_copy (&t, b)) != MP_OKAY) { return res; } px = a->used; x = a; } for (ix = 0; ix < px; ix++) { t.dp[ix] |= x->dp[ix]; } mp_clamp (&t); mp_exch (c, &t); mp_clear (&t); return MP_OKAY; } /* End: bn_mp_or.c */ /* Start: bn_mp_prime_fermat.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* performs one Fermat test. * * If "a" were prime then b**a == b (mod a) since the order of * the multiplicative sub-group would be phi(a) = a-1. That means * it would be the same as b**(a mod (a-1)) == b**1 == b (mod a). * * Sets result to 1 if the congruence holds, or zero otherwise. */ int mp_prime_fermat (mp_int * a, mp_int * b, int *result) { mp_int t; int err; /* default to composite */ *result = 0; /* ensure b > 1 */ if (mp_cmp_d(b, 1) != MP_GT) { return MP_VAL; } /* init t */ if ((err = mp_init (&t)) != MP_OKAY) { return err; } /* compute t = b**a mod a */ if ((err = mp_exptmod (b, a, a, &t)) != MP_OKAY) { goto __T; } /* is it equal to b? */ if (mp_cmp (&t, b) == MP_EQ) { *result = 1; } err = MP_OKAY; __T:mp_clear (&t); return err; } /* End: bn_mp_prime_fermat.c */ /* Start: bn_mp_prime_is_divisible.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* determines if an integers is divisible by one * of the first PRIME_SIZE primes or not * * sets result to 0 if not, 1 if yes */ int mp_prime_is_divisible (mp_int * a, int *result) { int err, ix; mp_digit res; /* default to not */ *result = 0; for (ix = 0; ix < PRIME_SIZE; ix++) { /* what is a mod __prime_tab[ix] */ if ((err = mp_mod_d (a, __prime_tab[ix], &res)) != MP_OKAY) { return err; } /* is the residue zero? */ if (res == 0) { *result = 1; return MP_OKAY; } } return MP_OKAY; } /* End: bn_mp_prime_is_divisible.c */ /* Start: bn_mp_prime_is_prime.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* performs a variable number of rounds of Miller-Rabin * * Probability of error after t rounds is no more than * (1/4)^t when 1 <= t <= PRIME_SIZE * * Sets result to 1 if probably prime, 0 otherwise */ int mp_prime_is_prime (mp_int * a, int t, int *result) { mp_int b; int ix, err, res; /* default to no */ *result = 0; /* valid value of t? */ if (t <= 0 || t > PRIME_SIZE) { return MP_VAL; } /* is the input equal to one of the primes in the table? */ for (ix = 0; ix < PRIME_SIZE; ix++) { if (mp_cmp_d(a, __prime_tab[ix]) == MP_EQ) { *result = 1; return MP_OKAY; } } /* first perform trial division */ if ((err = mp_prime_is_divisible (a, &res)) != MP_OKAY) { return err; } /* return if it was trivially divisible */ if (res == 1) { return MP_OKAY; } /* now perform the miller-rabin rounds */ if ((err = mp_init (&b)) != MP_OKAY) { return err; } for (ix = 0; ix < t; ix++) { /* set the prime */ mp_set (&b, __prime_tab[ix]); if ((err = mp_prime_miller_rabin (a, &b, &res)) != MP_OKAY) { goto __B; } if (res == 0) { goto __B; } } /* passed the test */ *result = 1; __B:mp_clear (&b); return err; } /* End: bn_mp_prime_is_prime.c */ /* Start: bn_mp_prime_miller_rabin.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* Miller-Rabin test of "a" to the base of "b" as described in * HAC pp. 139 Algorithm 4.24 * * Sets result to 0 if definitely composite or 1 if probably prime. * Randomly the chance of error is no more than 1/4 and often * very much lower. */ int mp_prime_miller_rabin (mp_int * a, mp_int * b, int *result) { mp_int n1, y, r; int s, j, err; /* default */ *result = 0; /* ensure b > 1 */ if (mp_cmp_d(b, 1) != MP_GT) { return MP_VAL; } /* get n1 = a - 1 */ if ((err = mp_init_copy (&n1, a)) != MP_OKAY) { return err; } if ((err = mp_sub_d (&n1, 1, &n1)) != MP_OKAY) { goto __N1; } /* set 2**s * r = n1 */ if ((err = mp_init_copy (&r, &n1)) != MP_OKAY) { goto __N1; } /* count the number of least significant bits * which are zero */ s = mp_cnt_lsb(&r); /* now divide n - 1 by 2**s */ if ((err = mp_div_2d (&r, s, &r, NULL)) != MP_OKAY) { goto __R; } /* compute y = b**r mod a */ if ((err = mp_init (&y)) != MP_OKAY) { goto __R; } if ((err = mp_exptmod (b, &r, a, &y)) != MP_OKAY) { goto __Y; } /* if y != 1 and y != n1 do */ if (mp_cmp_d (&y, 1) != MP_EQ && mp_cmp (&y, &n1) != MP_EQ) { j = 1; /* while j <= s-1 and y != n1 */ while ((j <= (s - 1)) && mp_cmp (&y, &n1) != MP_EQ) { if ((err = mp_sqrmod (&y, a, &y)) != MP_OKAY) { goto __Y; } /* if y == 1 then composite */ if (mp_cmp_d (&y, 1) == MP_EQ) { goto __Y; } ++j; } /* if y != n1 then composite */ if (mp_cmp (&y, &n1) != MP_EQ) { goto __Y; } } /* probably prime now */ *result = 1; __Y:mp_clear (&y); __R:mp_clear (&r); __N1:mp_clear (&n1); return err; } /* End: bn_mp_prime_miller_rabin.c */ /* Start: bn_mp_prime_next_prime.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* finds the next prime after the number "a" using "t" trials * of Miller-Rabin. * * bbs_style = 1 means the prime must be congruent to 3 mod 4 */ int mp_prime_next_prime(mp_int *a, int t, int bbs_style) { int err, res, x, y; mp_digit res_tab[PRIME_SIZE], step, kstep; mp_int b; /* ensure t is valid */ if (t <= 0 || t > PRIME_SIZE) { return MP_VAL; } /* force positive */ a->sign = MP_ZPOS; /* simple algo if a is less than the largest prime in the table */ if (mp_cmp_d(a, __prime_tab[PRIME_SIZE-1]) == MP_LT) { /* find which prime it is bigger than */ for (x = PRIME_SIZE - 2; x >= 0; x--) { if (mp_cmp_d(a, __prime_tab[x]) != MP_LT) { if (bbs_style == 1) { /* ok we found a prime smaller or * equal [so the next is larger] * * however, the prime must be * congruent to 3 mod 4 */ if ((__prime_tab[x + 1] & 3) != 3) { /* scan upwards for a prime congruent to 3 mod 4 */ for (y = x + 1; y < PRIME_SIZE; y++) { if ((__prime_tab[y] & 3) == 3) { mp_set(a, __prime_tab[y]); return MP_OKAY; } } } } else { mp_set(a, __prime_tab[x + 1]); return MP_OKAY; } } } /* at this point a maybe 1 */ if (mp_cmp_d(a, 1) == MP_EQ) { mp_set(a, 2); return MP_OKAY; } /* fall through to the sieve */ } /* generate a prime congruent to 3 mod 4 or 1/3 mod 4? */ if (bbs_style == 1) { kstep = 4; } else { kstep = 2; } /* at this point we will use a combination of a sieve and Miller-Rabin */ if (bbs_style == 1) { /* if a mod 4 != 3 subtract the correct value to make it so */ if ((a->dp[0] & 3) != 3) { if ((err = mp_sub_d(a, (a->dp[0] & 3) + 1, a)) != MP_OKAY) { return err; }; } } else { if (mp_iseven(a) == 1) { /* force odd */ if ((err = mp_sub_d(a, 1, a)) != MP_OKAY) { return err; } } } /* generate the restable */ for (x = 1; x < PRIME_SIZE; x++) { if ((err = mp_mod_d(a, __prime_tab[x], res_tab + x)) != MP_OKAY) { return err; } } /* init temp used for Miller-Rabin Testing */ if ((err = mp_init(&b)) != MP_OKAY) { return err; } for (;;) { /* skip to the next non-trivially divisible candidate */ step = 0; do { /* y == 1 if any residue was zero [e.g. cannot be prime] */ y = 0; /* increase step to next candidate */ step += kstep; /* compute the new residue without using division */ for (x = 1; x < PRIME_SIZE; x++) { /* add the step to each residue */ res_tab[x] += kstep; /* subtract the modulus [instead of using division] */ if (res_tab[x] >= __prime_tab[x]) { res_tab[x] -= __prime_tab[x]; } /* set flag if zero */ if (res_tab[x] == 0) { y = 1; } } } while (y == 1 && step < ((((mp_digit)1)<= ((((mp_digit)1)< /* returns size of ASCII reprensentation */ int mp_radix_size (mp_int * a, int radix) { int res, digs; mp_int t; mp_digit d; /* special case for binary */ if (radix == 2) { return mp_count_bits (a) + (a->sign == MP_NEG ? 1 : 0) + 1; } if (radix < 2 || radix > 64) { return 0; } if ((res = mp_init_copy (&t, a)) != MP_OKAY) { return 0; } digs = 0; if (t.sign == MP_NEG) { ++digs; t.sign = MP_ZPOS; } while (mp_iszero (&t) == 0) { if ((res = mp_div_d (&t, (mp_digit) radix, &t, &d)) != MP_OKAY) { mp_clear (&t); return 0; } ++digs; } mp_clear (&t); return digs + 1; } /* End: bn_mp_radix_size.c */ /* Start: bn_mp_radix_smap.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* chars used in radix conversions */ const char *mp_s_rmap = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz+/"; /* End: bn_mp_radix_smap.c */ /* Start: bn_mp_rand.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* makes a pseudo-random int of a given size */ int mp_rand (mp_int * a, int digits) { int res; mp_digit d; mp_zero (a); if (digits <= 0) { return MP_OKAY; } /* first place a random non-zero digit */ do { d = ((mp_digit) abs (rand ())); } while (d == 0); if ((res = mp_add_d (a, d, a)) != MP_OKAY) { return res; } while (digits-- > 0) { if ((res = mp_lshd (a, 1)) != MP_OKAY) { return res; } if ((res = mp_add_d (a, ((mp_digit) abs (rand ())), a)) != MP_OKAY) { return res; } } return MP_OKAY; } /* End: bn_mp_rand.c */ /* Start: bn_mp_read_radix.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* read a string [ASCII] in a given radix */ int mp_read_radix (mp_int * a, char *str, int radix) { int y, res, neg; char ch; /* make sure the radix is ok */ if (radix < 2 || radix > 64) { return MP_VAL; } /* if the leading digit is a * minus set the sign to negative. */ if (*str == '-') { ++str; neg = MP_NEG; } else { neg = MP_ZPOS; } /* set the integer to the default of zero */ mp_zero (a); /* process each digit of the string */ while (*str) { /* if the radix < 36 the conversion is case insensitive * this allows numbers like 1AB and 1ab to represent the same value * [e.g. in hex] */ ch = (char) ((radix < 36) ? toupper (*str) : *str); for (y = 0; y < 64; y++) { if (ch == mp_s_rmap[y]) { break; } } /* if the char was found in the map * and is less than the given radix add it * to the number, otherwise exit the loop. */ if (y < radix) { if ((res = mp_mul_d (a, (mp_digit) radix, a)) != MP_OKAY) { return res; } if ((res = mp_add_d (a, (mp_digit) y, a)) != MP_OKAY) { return res; } } else { break; } ++str; } /* set the sign only if a != 0 */ if (mp_iszero(a) != 1) { a->sign = neg; } return MP_OKAY; } /* End: bn_mp_read_radix.c */ /* Start: bn_mp_read_signed_bin.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* read signed bin, big endian, first byte is 0==positive or 1==negative */ int mp_read_signed_bin (mp_int * a, unsigned char *b, int c) { int res; /* read magnitude */ if ((res = mp_read_unsigned_bin (a, b + 1, c - 1)) != MP_OKAY) { return res; } /* first byte is 0 for positive, non-zero for negative */ if (b[0] == 0) { a->sign = MP_ZPOS; } else { a->sign = MP_NEG; } return MP_OKAY; } /* End: bn_mp_read_signed_bin.c */ /* Start: bn_mp_read_unsigned_bin.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* reads a unsigned char array, assumes the msb is stored first [big endian] */ int mp_read_unsigned_bin (mp_int * a, unsigned char *b, int c) { int res; /* make sure there are at least two digits */ if (a->alloc < 2) { if ((res = mp_grow(a, 2)) != MP_OKAY) { return res; } } /* zero the int */ mp_zero (a); /* read the bytes in */ while (c-- > 0) { if ((res = mp_mul_2d (a, 8, a)) != MP_OKAY) { return res; } #ifndef MP_8BIT a->dp[0] |= *b++; a->used += 1; #else a->dp[0] = (*b & MP_MASK); a->dp[1] |= ((*b++ >> 7U) & 1); a->used += 2; #endif } mp_clamp (a); return MP_OKAY; } /* End: bn_mp_read_unsigned_bin.c */ /* Start: bn_mp_reduce.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* reduces x mod m, assumes 0 < x < m**2, mu is * precomputed via mp_reduce_setup. * From HAC pp.604 Algorithm 14.42 */ int mp_reduce (mp_int * x, mp_int * m, mp_int * mu) { mp_int q; int res, um = m->used; /* q = x */ if ((res = mp_init_copy (&q, x)) != MP_OKAY) { return res; } /* q1 = x / b**(k-1) */ mp_rshd (&q, um - 1); /* according to HAC this optimization is ok */ if (((unsigned long) um) > (((mp_digit)1) << (DIGIT_BIT - 1))) { if ((res = mp_mul (&q, mu, &q)) != MP_OKAY) { goto CLEANUP; } } else { if ((res = s_mp_mul_high_digs (&q, mu, &q, um - 1)) != MP_OKAY) { goto CLEANUP; } } /* q3 = q2 / b**(k+1) */ mp_rshd (&q, um + 1); /* x = x mod b**(k+1), quick (no division) */ if ((res = mp_mod_2d (x, DIGIT_BIT * (um + 1), x)) != MP_OKAY) { goto CLEANUP; } /* q = q * m mod b**(k+1), quick (no division) */ if ((res = s_mp_mul_digs (&q, m, &q, um + 1)) != MP_OKAY) { goto CLEANUP; } /* x = x - q */ if ((res = mp_sub (x, &q, x)) != MP_OKAY) { goto CLEANUP; } /* If x < 0, add b**(k+1) to it */ if (mp_cmp_d (x, 0) == MP_LT) { mp_set (&q, 1); if ((res = mp_lshd (&q, um + 1)) != MP_OKAY) goto CLEANUP; if ((res = mp_add (x, &q, x)) != MP_OKAY) goto CLEANUP; } /* Back off if it's too big */ while (mp_cmp (x, m) != MP_LT) { if ((res = s_mp_sub (x, m, x)) != MP_OKAY) { goto CLEANUP; } } CLEANUP: mp_clear (&q); return res; } /* End: bn_mp_reduce.c */ /* Start: bn_mp_reduce_2k.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* reduces a modulo n where n is of the form 2**p - k */ int mp_reduce_2k(mp_int *a, mp_int *n, mp_digit k) { mp_int q; int p, res; if ((res = mp_init(&q)) != MP_OKAY) { return res; } p = mp_count_bits(n); top: /* q = a/2**p, a = a mod 2**p */ if ((res = mp_div_2d(a, p, &q, a)) != MP_OKAY) { goto ERR; } if (k != 1) { /* q = q * k */ if ((res = mp_mul_d(&q, k, &q)) != MP_OKAY) { goto ERR; } } /* a = a + q */ if ((res = s_mp_add(a, &q, a)) != MP_OKAY) { goto ERR; } if (mp_cmp_mag(a, n) != MP_LT) { s_mp_sub(a, n, a); goto top; } ERR: mp_clear(&q); return res; } /* End: bn_mp_reduce_2k.c */ /* Start: bn_mp_reduce_2k_setup.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* determines the setup value */ int mp_reduce_2k_setup(mp_int *a, mp_digit *d) { int res, p; mp_int tmp; if ((res = mp_init(&tmp)) != MP_OKAY) { return res; } p = mp_count_bits(a); if ((res = mp_2expt(&tmp, p)) != MP_OKAY) { mp_clear(&tmp); return res; } if ((res = s_mp_sub(&tmp, a, &tmp)) != MP_OKAY) { mp_clear(&tmp); return res; } *d = tmp.dp[0]; mp_clear(&tmp); return MP_OKAY; } /* End: bn_mp_reduce_2k_setup.c */ /* Start: bn_mp_reduce_is_2k.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* determines if mp_reduce_2k can be used */ int mp_reduce_is_2k(mp_int *a) { int ix, iy; if (a->used == 0) { return 0; } else if (a->used == 1) { return 1; } else if (a->used > 1) { iy = mp_count_bits(a); for (ix = DIGIT_BIT; ix < iy; ix++) { if ((a->dp[ix/DIGIT_BIT] & ((mp_digit)1 << (mp_digit)(ix % DIGIT_BIT))) == 0) { return 0; } } } return 1; } /* End: bn_mp_reduce_is_2k.c */ /* Start: bn_mp_reduce_setup.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* pre-calculate the value required for Barrett reduction * For a given modulus "b" it calulates the value required in "a" */ int mp_reduce_setup (mp_int * a, mp_int * b) { int res; if ((res = mp_2expt (a, b->used * 2 * DIGIT_BIT)) != MP_OKAY) { return res; } return mp_div (a, b, a, NULL); } /* End: bn_mp_reduce_setup.c */ /* Start: bn_mp_rshd.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* shift right a certain amount of digits */ void mp_rshd (mp_int * a, int b) { int x; /* if b <= 0 then ignore it */ if (b <= 0) { return; } /* if b > used then simply zero it and return */ if (a->used <= b) { mp_zero (a); return; } { register mp_digit *bottom, *top; /* shift the digits down */ /* bottom */ bottom = a->dp; /* top [offset into digits] */ top = a->dp + b; /* this is implemented as a sliding window where * the window is b-digits long and digits from * the top of the window are copied to the bottom * * e.g. b-2 | b-1 | b0 | b1 | b2 | ... | bb | ----> /\ | ----> \-------------------/ ----> */ for (x = 0; x < (a->used - b); x++) { *bottom++ = *top++; } /* zero the top digits */ for (; x < a->used; x++) { *bottom++ = 0; } } /* remove excess digits */ a->used -= b; } /* End: bn_mp_rshd.c */ /* Start: bn_mp_set.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* set to a digit */ void mp_set (mp_int * a, mp_digit b) { mp_zero (a); a->dp[0] = b & MP_MASK; a->used = (a->dp[0] != 0) ? 1 : 0; } /* End: bn_mp_set.c */ /* Start: bn_mp_set_int.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* set a 32-bit const */ int mp_set_int (mp_int * a, unsigned int b) { int x, res; mp_zero (a); /* set four bits at a time */ for (x = 0; x < 8; x++) { /* shift the number up four bits */ if ((res = mp_mul_2d (a, 4, a)) != MP_OKAY) { return res; } /* OR in the top four bits of the source */ a->dp[0] |= (b >> 28) & 15; /* shift the source up to the next four bits */ b <<= 4; /* ensure that digits are not clamped off */ a->used += 1; } mp_clamp (a); return MP_OKAY; } /* End: bn_mp_set_int.c */ /* Start: bn_mp_shrink.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* shrink a bignum */ int mp_shrink (mp_int * a) { if (a->alloc != a->used) { if ((a->dp = OPT_CAST XREALLOC (a->dp, sizeof (mp_digit) * a->used)) == NULL) { return MP_MEM; } a->alloc = a->used; } return MP_OKAY; } /* End: bn_mp_shrink.c */ /* Start: bn_mp_signed_bin_size.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* get the size for an signed equivalent */ int mp_signed_bin_size (mp_int * a) { return 1 + mp_unsigned_bin_size (a); } /* End: bn_mp_signed_bin_size.c */ /* Start: bn_mp_sqr.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* computes b = a*a */ int mp_sqr (mp_int * a, mp_int * b) { int res; /* use Toom-Cook? */ if (a->used >= TOOM_SQR_CUTOFF) { res = mp_toom_sqr(a, b); /* Karatsuba? */ } else if (a->used >= KARATSUBA_SQR_CUTOFF) { res = mp_karatsuba_sqr (a, b); } else { /* can we use the fast comba multiplier? */ if ((a->used * 2 + 1) < MP_WARRAY && a->used < (1 << (sizeof(mp_word) * CHAR_BIT - 2*DIGIT_BIT - 1))) { res = fast_s_mp_sqr (a, b); } else { res = s_mp_sqr (a, b); } } b->sign = MP_ZPOS; return res; } /* End: bn_mp_sqr.c */ /* Start: bn_mp_sqrmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* c = a * a (mod b) */ int mp_sqrmod (mp_int * a, mp_int * b, mp_int * c) { int res; mp_int t; if ((res = mp_init (&t)) != MP_OKAY) { return res; } if ((res = mp_sqr (a, &t)) != MP_OKAY) { mp_clear (&t); return res; } res = mp_mod (&t, b, c); mp_clear (&t); return res; } /* End: bn_mp_sqrmod.c */ /* Start: bn_mp_sub.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* high level subtraction (handles signs) */ int mp_sub (mp_int * a, mp_int * b, mp_int * c) { int sa, sb, res; sa = a->sign; sb = b->sign; if (sa != sb) { /* subtract a negative from a positive, OR */ /* subtract a positive from a negative. */ /* In either case, ADD their magnitudes, */ /* and use the sign of the first number. */ c->sign = sa; res = s_mp_add (a, b, c); } else { /* subtract a positive from a positive, OR */ /* subtract a negative from a negative. */ /* First, take the difference between their */ /* magnitudes, then... */ if (mp_cmp_mag (a, b) != MP_LT) { /* Copy the sign from the first */ c->sign = sa; /* The first has a larger or equal magnitude */ res = s_mp_sub (a, b, c); } else { /* The result has the *opposite* sign from */ /* the first number. */ c->sign = (sa == MP_ZPOS) ? MP_NEG : MP_ZPOS; /* The second has a larger magnitude */ res = s_mp_sub (b, a, c); } } return res; } /* End: bn_mp_sub.c */ /* Start: bn_mp_sub_d.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* single digit subtraction */ int mp_sub_d (mp_int * a, mp_digit b, mp_int * c) { mp_digit *tmpa, *tmpc, mu; int res, ix, oldused; /* grow c as required */ if (c->alloc < a->used + 1) { if ((res = mp_grow(c, a->used + 1)) != MP_OKAY) { return res; } } /* if a is negative just do an unsigned * addition [with fudged signs] */ if (a->sign == MP_NEG) { a->sign = MP_ZPOS; res = mp_add_d(a, b, c); a->sign = c->sign = MP_NEG; return res; } /* setup regs */ oldused = c->used; tmpa = a->dp; tmpc = c->dp; /* if a <= b simply fix the single digit */ if ((a->used == 1 && a->dp[0] <= b) || a->used == 0) { if (a->used == 1) { *tmpc++ = b - *tmpa; } else { *tmpc++ = b; } ix = 1; /* negative/1digit */ c->sign = MP_NEG; c->used = 1; } else { /* positive/size */ c->sign = MP_ZPOS; c->used = a->used; /* subtract first digit */ *tmpc = *tmpa++ - b; mu = *tmpc >> (sizeof(mp_digit) * CHAR_BIT - 1); *tmpc++ &= MP_MASK; /* handle rest of the digits */ for (ix = 1; ix < a->used; ix++) { *tmpc = *tmpa++ - mu; mu = *tmpc >> (sizeof(mp_digit) * CHAR_BIT - 1); *tmpc++ &= MP_MASK; } } for (; ix < oldused; ix++) { *tmpc++ = 0; } mp_clamp(c); return MP_OKAY; } /* End: bn_mp_sub_d.c */ /* Start: bn_mp_submod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* d = a - b (mod c) */ int mp_submod (mp_int * a, mp_int * b, mp_int * c, mp_int * d) { int res; mp_int t; if ((res = mp_init (&t)) != MP_OKAY) { return res; } if ((res = mp_sub (a, b, &t)) != MP_OKAY) { mp_clear (&t); return res; } res = mp_mod (&t, c, d); mp_clear (&t); return res; } /* End: bn_mp_submod.c */ /* Start: bn_mp_to_signed_bin.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* store in signed [big endian] format */ int mp_to_signed_bin (mp_int * a, unsigned char *b) { int res; if ((res = mp_to_unsigned_bin (a, b + 1)) != MP_OKAY) { return res; } b[0] = (unsigned char) ((a->sign == MP_ZPOS) ? 0 : 1); return MP_OKAY; } /* End: bn_mp_to_signed_bin.c */ /* Start: bn_mp_to_unsigned_bin.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* store in unsigned [big endian] format */ int mp_to_unsigned_bin (mp_int * a, unsigned char *b) { int x, res; mp_int t; if ((res = mp_init_copy (&t, a)) != MP_OKAY) { return res; } x = 0; while (mp_iszero (&t) == 0) { #ifndef MP_8BIT b[x++] = (unsigned char) (t.dp[0] & 255); #else b[x++] = (unsigned char) (t.dp[0] | ((t.dp[1] & 0x01) << 7)); #endif if ((res = mp_div_2d (&t, 8, &t, NULL)) != MP_OKAY) { mp_clear (&t); return res; } } bn_reverse (b, x); mp_clear (&t); return MP_OKAY; } /* End: bn_mp_to_unsigned_bin.c */ /* Start: bn_mp_toom_mul.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* multiplication using the Toom-Cook 3-way algorithm */ int mp_toom_mul(mp_int *a, mp_int *b, mp_int *c) { mp_int w0, w1, w2, w3, w4, tmp1, tmp2, a0, a1, a2, b0, b1, b2; int res, B; /* init temps */ if ((res = mp_init_multi(&w0, &w1, &w2, &w3, &w4, &a0, &a1, &a2, &b0, &b1, &b2, &tmp1, &tmp2, NULL)) != MP_OKAY) { return res; } /* B */ B = MIN(a->used, b->used) / 3; /* a = a2 * B**2 + a1 * B + a0 */ if ((res = mp_mod_2d(a, DIGIT_BIT * B, &a0)) != MP_OKAY) { goto ERR; } if ((res = mp_copy(a, &a1)) != MP_OKAY) { goto ERR; } mp_rshd(&a1, B); mp_mod_2d(&a1, DIGIT_BIT * B, &a1); if ((res = mp_copy(a, &a2)) != MP_OKAY) { goto ERR; } mp_rshd(&a2, B*2); /* b = b2 * B**2 + b1 * B + b0 */ if ((res = mp_mod_2d(b, DIGIT_BIT * B, &b0)) != MP_OKAY) { goto ERR; } if ((res = mp_copy(b, &b1)) != MP_OKAY) { goto ERR; } mp_rshd(&b1, B); mp_mod_2d(&b1, DIGIT_BIT * B, &b1); if ((res = mp_copy(b, &b2)) != MP_OKAY) { goto ERR; } mp_rshd(&b2, B*2); /* w0 = a0*b0 */ if ((res = mp_mul(&a0, &b0, &w0)) != MP_OKAY) { goto ERR; } /* w4 = a2 * b2 */ if ((res = mp_mul(&a2, &b2, &w4)) != MP_OKAY) { goto ERR; } /* w1 = (a2 + 2(a1 + 2a0))(b2 + 2(b1 + 2b0)) */ if ((res = mp_mul_2(&a0, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&tmp1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a2, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&b0, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp2, &b1, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&tmp2, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp2, &b2, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_mul(&tmp1, &tmp2, &w1)) != MP_OKAY) { goto ERR; } /* w3 = (a0 + 2(a1 + 2a2))(b0 + 2(b1 + 2b2)) */ if ((res = mp_mul_2(&a2, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&tmp1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a0, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&b2, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp2, &b1, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&tmp2, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp2, &b0, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_mul(&tmp1, &tmp2, &w3)) != MP_OKAY) { goto ERR; } /* w2 = (a2 + a1 + a0)(b2 + b1 + b0) */ if ((res = mp_add(&a2, &a1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a0, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&b2, &b1, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp2, &b0, &tmp2)) != MP_OKAY) { goto ERR; } if ((res = mp_mul(&tmp1, &tmp2, &w2)) != MP_OKAY) { goto ERR; } /* now solve the matrix 0 0 0 0 1 1 2 4 8 16 1 1 1 1 1 16 8 4 2 1 1 0 0 0 0 using 12 subtractions, 4 shifts, 2 small divisions and 1 small multiplication */ /* r1 - r4 */ if ((res = mp_sub(&w1, &w4, &w1)) != MP_OKAY) { goto ERR; } /* r3 - r0 */ if ((res = mp_sub(&w3, &w0, &w3)) != MP_OKAY) { goto ERR; } /* r1/2 */ if ((res = mp_div_2(&w1, &w1)) != MP_OKAY) { goto ERR; } /* r3/2 */ if ((res = mp_div_2(&w3, &w3)) != MP_OKAY) { goto ERR; } /* r2 - r0 - r4 */ if ((res = mp_sub(&w2, &w0, &w2)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w2, &w4, &w2)) != MP_OKAY) { goto ERR; } /* r1 - r2 */ if ((res = mp_sub(&w1, &w2, &w1)) != MP_OKAY) { goto ERR; } /* r3 - r2 */ if ((res = mp_sub(&w3, &w2, &w3)) != MP_OKAY) { goto ERR; } /* r1 - 8r0 */ if ((res = mp_mul_2d(&w0, 3, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w1, &tmp1, &w1)) != MP_OKAY) { goto ERR; } /* r3 - 8r4 */ if ((res = mp_mul_2d(&w4, 3, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w3, &tmp1, &w3)) != MP_OKAY) { goto ERR; } /* 3r2 - r1 - r3 */ if ((res = mp_mul_d(&w2, 3, &w2)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w2, &w1, &w2)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w2, &w3, &w2)) != MP_OKAY) { goto ERR; } /* r1 - r2 */ if ((res = mp_sub(&w1, &w2, &w1)) != MP_OKAY) { goto ERR; } /* r3 - r2 */ if ((res = mp_sub(&w3, &w2, &w3)) != MP_OKAY) { goto ERR; } /* r1/3 */ if ((res = mp_div_3(&w1, &w1, NULL)) != MP_OKAY) { goto ERR; } /* r3/3 */ if ((res = mp_div_3(&w3, &w3, NULL)) != MP_OKAY) { goto ERR; } /* at this point shift W[n] by B*n */ if ((res = mp_lshd(&w1, 1*B)) != MP_OKAY) { goto ERR; } if ((res = mp_lshd(&w2, 2*B)) != MP_OKAY) { goto ERR; } if ((res = mp_lshd(&w3, 3*B)) != MP_OKAY) { goto ERR; } if ((res = mp_lshd(&w4, 4*B)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&w0, &w1, c)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&w2, &w3, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&w4, &tmp1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, c, c)) != MP_OKAY) { goto ERR; } ERR: mp_clear_multi(&w0, &w1, &w2, &w3, &w4, &a0, &a1, &a2, &b0, &b1, &b2, &tmp1, &tmp2, NULL); return res; } /* End: bn_mp_toom_mul.c */ /* Start: bn_mp_toom_sqr.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* squaring using Toom-Cook 3-way algorithm */ int mp_toom_sqr(mp_int *a, mp_int *b) { mp_int w0, w1, w2, w3, w4, tmp1, a0, a1, a2; int res, B; /* init temps */ if ((res = mp_init_multi(&w0, &w1, &w2, &w3, &w4, &a0, &a1, &a2, &tmp1, NULL)) != MP_OKAY) { return res; } /* B */ B = a->used / 3; /* a = a2 * B^2 + a1 * B + a0 */ if ((res = mp_mod_2d(a, DIGIT_BIT * B, &a0)) != MP_OKAY) { goto ERR; } if ((res = mp_copy(a, &a1)) != MP_OKAY) { goto ERR; } mp_rshd(&a1, B); mp_mod_2d(&a1, DIGIT_BIT * B, &a1); if ((res = mp_copy(a, &a2)) != MP_OKAY) { goto ERR; } mp_rshd(&a2, B*2); /* w0 = a0*a0 */ if ((res = mp_sqr(&a0, &w0)) != MP_OKAY) { goto ERR; } /* w4 = a2 * a2 */ if ((res = mp_sqr(&a2, &w4)) != MP_OKAY) { goto ERR; } /* w1 = (a2 + 2(a1 + 2a0))**2 */ if ((res = mp_mul_2(&a0, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&tmp1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a2, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sqr(&tmp1, &w1)) != MP_OKAY) { goto ERR; } /* w3 = (a0 + 2(a1 + 2a2))**2 */ if ((res = mp_mul_2(&a2, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_mul_2(&tmp1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a0, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sqr(&tmp1, &w3)) != MP_OKAY) { goto ERR; } /* w2 = (a2 + a1 + a0)**2 */ if ((res = mp_add(&a2, &a1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, &a0, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sqr(&tmp1, &w2)) != MP_OKAY) { goto ERR; } /* now solve the matrix 0 0 0 0 1 1 2 4 8 16 1 1 1 1 1 16 8 4 2 1 1 0 0 0 0 using 12 subtractions, 4 shifts, 2 small divisions and 1 small multiplication. */ /* r1 - r4 */ if ((res = mp_sub(&w1, &w4, &w1)) != MP_OKAY) { goto ERR; } /* r3 - r0 */ if ((res = mp_sub(&w3, &w0, &w3)) != MP_OKAY) { goto ERR; } /* r1/2 */ if ((res = mp_div_2(&w1, &w1)) != MP_OKAY) { goto ERR; } /* r3/2 */ if ((res = mp_div_2(&w3, &w3)) != MP_OKAY) { goto ERR; } /* r2 - r0 - r4 */ if ((res = mp_sub(&w2, &w0, &w2)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w2, &w4, &w2)) != MP_OKAY) { goto ERR; } /* r1 - r2 */ if ((res = mp_sub(&w1, &w2, &w1)) != MP_OKAY) { goto ERR; } /* r3 - r2 */ if ((res = mp_sub(&w3, &w2, &w3)) != MP_OKAY) { goto ERR; } /* r1 - 8r0 */ if ((res = mp_mul_2d(&w0, 3, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w1, &tmp1, &w1)) != MP_OKAY) { goto ERR; } /* r3 - 8r4 */ if ((res = mp_mul_2d(&w4, 3, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w3, &tmp1, &w3)) != MP_OKAY) { goto ERR; } /* 3r2 - r1 - r3 */ if ((res = mp_mul_d(&w2, 3, &w2)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w2, &w1, &w2)) != MP_OKAY) { goto ERR; } if ((res = mp_sub(&w2, &w3, &w2)) != MP_OKAY) { goto ERR; } /* r1 - r2 */ if ((res = mp_sub(&w1, &w2, &w1)) != MP_OKAY) { goto ERR; } /* r3 - r2 */ if ((res = mp_sub(&w3, &w2, &w3)) != MP_OKAY) { goto ERR; } /* r1/3 */ if ((res = mp_div_3(&w1, &w1, NULL)) != MP_OKAY) { goto ERR; } /* r3/3 */ if ((res = mp_div_3(&w3, &w3, NULL)) != MP_OKAY) { goto ERR; } /* at this point shift W[n] by B*n */ if ((res = mp_lshd(&w1, 1*B)) != MP_OKAY) { goto ERR; } if ((res = mp_lshd(&w2, 2*B)) != MP_OKAY) { goto ERR; } if ((res = mp_lshd(&w3, 3*B)) != MP_OKAY) { goto ERR; } if ((res = mp_lshd(&w4, 4*B)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&w0, &w1, b)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&w2, &w3, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&w4, &tmp1, &tmp1)) != MP_OKAY) { goto ERR; } if ((res = mp_add(&tmp1, b, b)) != MP_OKAY) { goto ERR; } ERR: mp_clear_multi(&w0, &w1, &w2, &w3, &w4, &a0, &a1, &a2, &tmp1, NULL); return res; } /* End: bn_mp_toom_sqr.c */ /* Start: bn_mp_toradix.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* stores a bignum as a ASCII string in a given radix (2..64) */ int mp_toradix (mp_int * a, char *str, int radix) { int res, digs; mp_int t; mp_digit d; char *_s = str; if (radix < 2 || radix > 64) { return MP_VAL; } /* quick out if its zero */ if (mp_iszero(a) == 1) { *str++ = '0'; *str = '\0'; return MP_OKAY; } if ((res = mp_init_copy (&t, a)) != MP_OKAY) { return res; } /* if it is negative output a - */ if (t.sign == MP_NEG) { ++_s; *str++ = '-'; t.sign = MP_ZPOS; } digs = 0; while (mp_iszero (&t) == 0) { if ((res = mp_div_d (&t, (mp_digit) radix, &t, &d)) != MP_OKAY) { mp_clear (&t); return res; } *str++ = mp_s_rmap[d]; ++digs; } /* reverse the digits of the string. In this case _s points * to the first digit [exluding the sign] of the number] */ bn_reverse ((unsigned char *)_s, digs); /* append a NULL so the string is properly terminated */ *str++ = '\0'; mp_clear (&t); return MP_OKAY; } /* End: bn_mp_toradix.c */ /* Start: bn_mp_unsigned_bin_size.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* get the size for an unsigned equivalent */ int mp_unsigned_bin_size (mp_int * a) { int size = mp_count_bits (a); return (size / 8 + ((size & 7) != 0 ? 1 : 0)); } /* End: bn_mp_unsigned_bin_size.c */ /* Start: bn_mp_xor.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* XOR two ints together */ int mp_xor (mp_int * a, mp_int * b, mp_int * c) { int res, ix, px; mp_int t, *x; if (a->used > b->used) { if ((res = mp_init_copy (&t, a)) != MP_OKAY) { return res; } px = b->used; x = b; } else { if ((res = mp_init_copy (&t, b)) != MP_OKAY) { return res; } px = a->used; x = a; } for (ix = 0; ix < px; ix++) { t.dp[ix] ^= x->dp[ix]; } mp_clamp (&t); mp_exch (c, &t); mp_clear (&t); return MP_OKAY; } /* End: bn_mp_xor.c */ /* Start: bn_mp_zero.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* set to zero */ void mp_zero (mp_int * a) { a->sign = MP_ZPOS; a->used = 0; memset (a->dp, 0, sizeof (mp_digit) * a->alloc); } /* End: bn_mp_zero.c */ /* Start: bn_prime_tab.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include const mp_digit __prime_tab[] = { 0x0002, 0x0003, 0x0005, 0x0007, 0x000B, 0x000D, 0x0011, 0x0013, 0x0017, 0x001D, 0x001F, 0x0025, 0x0029, 0x002B, 0x002F, 0x0035, 0x003B, 0x003D, 0x0043, 0x0047, 0x0049, 0x004F, 0x0053, 0x0059, 0x0061, 0x0065, 0x0067, 0x006B, 0x006D, 0x0071, 0x007F, #ifndef MP_8BIT 0x0083, 0x0089, 0x008B, 0x0095, 0x0097, 0x009D, 0x00A3, 0x00A7, 0x00AD, 0x00B3, 0x00B5, 0x00BF, 0x00C1, 0x00C5, 0x00C7, 0x00D3, 0x00DF, 0x00E3, 0x00E5, 0x00E9, 0x00EF, 0x00F1, 0x00FB, 0x0101, 0x0107, 0x010D, 0x010F, 0x0115, 0x0119, 0x011B, 0x0125, 0x0133, 0x0137, 0x0139, 0x013D, 0x014B, 0x0151, 0x015B, 0x015D, 0x0161, 0x0167, 0x016F, 0x0175, 0x017B, 0x017F, 0x0185, 0x018D, 0x0191, 0x0199, 0x01A3, 0x01A5, 0x01AF, 0x01B1, 0x01B7, 0x01BB, 0x01C1, 0x01C9, 0x01CD, 0x01CF, 0x01D3, 0x01DF, 0x01E7, 0x01EB, 0x01F3, 0x01F7, 0x01FD, 0x0209, 0x020B, 0x021D, 0x0223, 0x022D, 0x0233, 0x0239, 0x023B, 0x0241, 0x024B, 0x0251, 0x0257, 0x0259, 0x025F, 0x0265, 0x0269, 0x026B, 0x0277, 0x0281, 0x0283, 0x0287, 0x028D, 0x0293, 0x0295, 0x02A1, 0x02A5, 0x02AB, 0x02B3, 0x02BD, 0x02C5, 0x02CF, 0x02D7, 0x02DD, 0x02E3, 0x02E7, 0x02EF, 0x02F5, 0x02F9, 0x0301, 0x0305, 0x0313, 0x031D, 0x0329, 0x032B, 0x0335, 0x0337, 0x033B, 0x033D, 0x0347, 0x0355, 0x0359, 0x035B, 0x035F, 0x036D, 0x0371, 0x0373, 0x0377, 0x038B, 0x038F, 0x0397, 0x03A1, 0x03A9, 0x03AD, 0x03B3, 0x03B9, 0x03C7, 0x03CB, 0x03D1, 0x03D7, 0x03DF, 0x03E5, 0x03F1, 0x03F5, 0x03FB, 0x03FD, 0x0407, 0x0409, 0x040F, 0x0419, 0x041B, 0x0425, 0x0427, 0x042D, 0x043F, 0x0443, 0x0445, 0x0449, 0x044F, 0x0455, 0x045D, 0x0463, 0x0469, 0x047F, 0x0481, 0x048B, 0x0493, 0x049D, 0x04A3, 0x04A9, 0x04B1, 0x04BD, 0x04C1, 0x04C7, 0x04CD, 0x04CF, 0x04D5, 0x04E1, 0x04EB, 0x04FD, 0x04FF, 0x0503, 0x0509, 0x050B, 0x0511, 0x0515, 0x0517, 0x051B, 0x0527, 0x0529, 0x052F, 0x0551, 0x0557, 0x055D, 0x0565, 0x0577, 0x0581, 0x058F, 0x0593, 0x0595, 0x0599, 0x059F, 0x05A7, 0x05AB, 0x05AD, 0x05B3, 0x05BF, 0x05C9, 0x05CB, 0x05CF, 0x05D1, 0x05D5, 0x05DB, 0x05E7, 0x05F3, 0x05FB, 0x0607, 0x060D, 0x0611, 0x0617, 0x061F, 0x0623, 0x062B, 0x062F, 0x063D, 0x0641, 0x0647, 0x0649, 0x064D, 0x0653 #endif }; /* End: bn_prime_tab.c */ /* Start: bn_reverse.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* reverse an array, used for radix code */ void bn_reverse (unsigned char *s, int len) { int ix, iy; unsigned char t; ix = 0; iy = len - 1; while (ix < iy) { t = s[ix]; s[ix] = s[iy]; s[iy] = t; ++ix; --iy; } } /* End: bn_reverse.c */ /* Start: bn_s_mp_add.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* low level addition, based on HAC pp.594, Algorithm 14.7 */ int s_mp_add (mp_int * a, mp_int * b, mp_int * c) { mp_int *x; int olduse, res, min, max; /* find sizes, we let |a| <= |b| which means we have to sort * them. "x" will point to the input with the most digits */ if (a->used > b->used) { min = b->used; max = a->used; x = a; } else { min = a->used; max = b->used; x = b; } /* init result */ if (c->alloc < max + 1) { if ((res = mp_grow (c, max + 1)) != MP_OKAY) { return res; } } /* get old used digit count and set new one */ olduse = c->used; c->used = max + 1; { register mp_digit u, *tmpa, *tmpb, *tmpc; register int i; /* alias for digit pointers */ /* first input */ tmpa = a->dp; /* second input */ tmpb = b->dp; /* destination */ tmpc = c->dp; /* zero the carry */ u = 0; for (i = 0; i < min; i++) { /* Compute the sum at one digit, T[i] = A[i] + B[i] + U */ *tmpc = *tmpa++ + *tmpb++ + u; /* U = carry bit of T[i] */ u = *tmpc >> ((mp_digit)DIGIT_BIT); /* take away carry bit from T[i] */ *tmpc++ &= MP_MASK; } /* now copy higher words if any, that is in A+B * if A or B has more digits add those in */ if (min != max) { for (; i < max; i++) { /* T[i] = X[i] + U */ *tmpc = x->dp[i] + u; /* U = carry bit of T[i] */ u = *tmpc >> ((mp_digit)DIGIT_BIT); /* take away carry bit from T[i] */ *tmpc++ &= MP_MASK; } } /* add carry */ *tmpc++ = u; /* clear digits above oldused */ for (i = c->used; i < olduse; i++) { *tmpc++ = 0; } } mp_clamp (c); return MP_OKAY; } /* End: bn_s_mp_add.c */ /* Start: bn_s_mp_exptmod.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include #ifdef MP_LOW_MEM #define TAB_SIZE 32 #else #define TAB_SIZE 256 #endif int s_mp_exptmod (mp_int * G, mp_int * X, mp_int * P, mp_int * Y) { mp_int M[TAB_SIZE], res, mu; mp_digit buf; int err, bitbuf, bitcpy, bitcnt, mode, digidx, x, y, winsize; /* find window size */ x = mp_count_bits (X); if (x <= 7) { winsize = 2; } else if (x <= 36) { winsize = 3; } else if (x <= 140) { winsize = 4; } else if (x <= 450) { winsize = 5; } else if (x <= 1303) { winsize = 6; } else if (x <= 3529) { winsize = 7; } else { winsize = 8; } #ifdef MP_LOW_MEM if (winsize > 5) { winsize = 5; } #endif /* init M array */ /* init first cell */ if ((err = mp_init(&M[1])) != MP_OKAY) { return err; } /* now init the second half of the array */ for (x = 1<<(winsize-1); x < (1 << winsize); x++) { if ((err = mp_init(&M[x])) != MP_OKAY) { for (y = 1<<(winsize-1); y < x; y++) { mp_clear (&M[y]); } mp_clear(&M[1]); return err; } } /* create mu, used for Barrett reduction */ if ((err = mp_init (&mu)) != MP_OKAY) { goto __M; } if ((err = mp_reduce_setup (&mu, P)) != MP_OKAY) { goto __MU; } /* create M table * * The M table contains powers of the base, * e.g. M[x] = G**x mod P * * The first half of the table is not * computed though accept for M[0] and M[1] */ if ((err = mp_mod (G, P, &M[1])) != MP_OKAY) { goto __MU; } /* compute the value at M[1<<(winsize-1)] by squaring * M[1] (winsize-1) times */ if ((err = mp_copy (&M[1], &M[1 << (winsize - 1)])) != MP_OKAY) { goto __MU; } for (x = 0; x < (winsize - 1); x++) { if ((err = mp_sqr (&M[1 << (winsize - 1)], &M[1 << (winsize - 1)])) != MP_OKAY) { goto __MU; } if ((err = mp_reduce (&M[1 << (winsize - 1)], P, &mu)) != MP_OKAY) { goto __MU; } } /* create upper table, that is M[x] = M[x-1] * M[1] (mod P) * for x = (2**(winsize - 1) + 1) to (2**winsize - 1) */ for (x = (1 << (winsize - 1)) + 1; x < (1 << winsize); x++) { if ((err = mp_mul (&M[x - 1], &M[1], &M[x])) != MP_OKAY) { goto __MU; } if ((err = mp_reduce (&M[x], P, &mu)) != MP_OKAY) { goto __MU; } } /* setup result */ if ((err = mp_init (&res)) != MP_OKAY) { goto __MU; } mp_set (&res, 1); /* set initial mode and bit cnt */ mode = 0; bitcnt = 1; buf = 0; digidx = X->used - 1; bitcpy = 0; bitbuf = 0; for (;;) { /* grab next digit as required */ if (--bitcnt == 0) { /* if digidx == -1 we are out of digits */ if (digidx == -1) { break; } /* read next digit and reset the bitcnt */ buf = X->dp[digidx--]; bitcnt = (int) DIGIT_BIT; } /* grab the next msb from the exponent */ y = (buf >> (mp_digit)(DIGIT_BIT - 1)) & 1; buf <<= (mp_digit)1; /* if the bit is zero and mode == 0 then we ignore it * These represent the leading zero bits before the first 1 bit * in the exponent. Technically this opt is not required but it * does lower the # of trivial squaring/reductions used */ if (mode == 0 && y == 0) { continue; } /* if the bit is zero and mode == 1 then we square */ if (mode == 1 && y == 0) { if ((err = mp_sqr (&res, &res)) != MP_OKAY) { goto __RES; } if ((err = mp_reduce (&res, P, &mu)) != MP_OKAY) { goto __RES; } continue; } /* else we add it to the window */ bitbuf |= (y << (winsize - ++bitcpy)); mode = 2; if (bitcpy == winsize) { /* ok window is filled so square as required and multiply */ /* square first */ for (x = 0; x < winsize; x++) { if ((err = mp_sqr (&res, &res)) != MP_OKAY) { goto __RES; } if ((err = mp_reduce (&res, P, &mu)) != MP_OKAY) { goto __RES; } } /* then multiply */ if ((err = mp_mul (&res, &M[bitbuf], &res)) != MP_OKAY) { goto __MU; } if ((err = mp_reduce (&res, P, &mu)) != MP_OKAY) { goto __MU; } /* empty window and reset */ bitcpy = 0; bitbuf = 0; mode = 1; } } /* if bits remain then square/multiply */ if (mode == 2 && bitcpy > 0) { /* square then multiply if the bit is set */ for (x = 0; x < bitcpy; x++) { if ((err = mp_sqr (&res, &res)) != MP_OKAY) { goto __RES; } if ((err = mp_reduce (&res, P, &mu)) != MP_OKAY) { goto __RES; } bitbuf <<= 1; if ((bitbuf & (1 << winsize)) != 0) { /* then multiply */ if ((err = mp_mul (&res, &M[1], &res)) != MP_OKAY) { goto __RES; } if ((err = mp_reduce (&res, P, &mu)) != MP_OKAY) { goto __RES; } } } } mp_exch (&res, Y); err = MP_OKAY; __RES:mp_clear (&res); __MU:mp_clear (&mu); __M: mp_clear(&M[1]); for (x = 1<<(winsize-1); x < (1 << winsize); x++) { mp_clear (&M[x]); } return err; } /* End: bn_s_mp_exptmod.c */ /* Start: bn_s_mp_mul_digs.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* multiplies |a| * |b| and only computes upto digs digits of result * HAC pp. 595, Algorithm 14.12 Modified so you can control how * many digits of output are created. */ int s_mp_mul_digs (mp_int * a, mp_int * b, mp_int * c, int digs) { mp_int t; int res, pa, pb, ix, iy; mp_digit u; mp_word r; mp_digit tmpx, *tmpt, *tmpy; /* can we use the fast multiplier? */ if (((digs) < MP_WARRAY) && MIN (a->used, b->used) < (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) { return fast_s_mp_mul_digs (a, b, c, digs); } if ((res = mp_init_size (&t, digs)) != MP_OKAY) { return res; } t.used = digs; /* compute the digits of the product directly */ pa = a->used; for (ix = 0; ix < pa; ix++) { /* set the carry to zero */ u = 0; /* limit ourselves to making digs digits of output */ pb = MIN (b->used, digs - ix); /* setup some aliases */ /* copy of the digit from a used within the nested loop */ tmpx = a->dp[ix]; /* an alias for the destination shifted ix places */ tmpt = t.dp + ix; /* an alias for the digits of b */ tmpy = b->dp; /* compute the columns of the output and propagate the carry */ for (iy = 0; iy < pb; iy++) { /* compute the column as a mp_word */ r = ((mp_word)*tmpt) + ((mp_word)tmpx) * ((mp_word)*tmpy++) + ((mp_word) u); /* the new column is the lower part of the result */ *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK)); /* get the carry word from the result */ u = (mp_digit) (r >> ((mp_word) DIGIT_BIT)); } /* set carry if it is placed below digs */ if (ix + iy < digs) { *tmpt = u; } } mp_clamp (&t); mp_exch (&t, c); mp_clear (&t); return MP_OKAY; } /* End: bn_s_mp_mul_digs.c */ /* Start: bn_s_mp_mul_high_digs.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* multiplies |a| * |b| and does not compute the lower digs digits * [meant to get the higher part of the product] */ int s_mp_mul_high_digs (mp_int * a, mp_int * b, mp_int * c, int digs) { mp_int t; int res, pa, pb, ix, iy; mp_digit u; mp_word r; mp_digit tmpx, *tmpt, *tmpy; /* can we use the fast multiplier? */ if (((a->used + b->used + 1) < MP_WARRAY) && MIN (a->used, b->used) < (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) { return fast_s_mp_mul_high_digs (a, b, c, digs); } if ((res = mp_init_size (&t, a->used + b->used + 1)) != MP_OKAY) { return res; } t.used = a->used + b->used + 1; pa = a->used; pb = b->used; for (ix = 0; ix < pa; ix++) { /* clear the carry */ u = 0; /* left hand side of A[ix] * B[iy] */ tmpx = a->dp[ix]; /* alias to the address of where the digits will be stored */ tmpt = &(t.dp[digs]); /* alias for where to read the right hand side from */ tmpy = b->dp + (digs - ix); for (iy = digs - ix; iy < pb; iy++) { /* calculate the double precision result */ r = ((mp_word)*tmpt) + ((mp_word)tmpx) * ((mp_word)*tmpy++) + ((mp_word) u); /* get the lower part */ *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK)); /* carry the carry */ u = (mp_digit) (r >> ((mp_word) DIGIT_BIT)); } *tmpt = u; } mp_clamp (&t); mp_exch (&t, c); mp_clear (&t); return MP_OKAY; } /* End: bn_s_mp_mul_high_digs.c */ /* Start: bn_s_mp_sqr.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* low level squaring, b = a*a, HAC pp.596-597, Algorithm 14.16 */ int s_mp_sqr (mp_int * a, mp_int * b) { mp_int t; int res, ix, iy, pa; mp_word r; mp_digit u, tmpx, *tmpt; pa = a->used; if ((res = mp_init_size (&t, 2*pa + 1)) != MP_OKAY) { return res; } t.used = 2*pa + 1; for (ix = 0; ix < pa; ix++) { /* first calculate the digit at 2*ix */ /* calculate double precision result */ r = ((mp_word) t.dp[2*ix]) + ((mp_word)a->dp[ix])*((mp_word)a->dp[ix]); /* store lower part in result */ t.dp[2*ix] = (mp_digit) (r & ((mp_word) MP_MASK)); /* get the carry */ u = (mp_digit)(r >> ((mp_word) DIGIT_BIT)); /* left hand side of A[ix] * A[iy] */ tmpx = a->dp[ix]; /* alias for where to store the results */ tmpt = t.dp + (2*ix + 1); for (iy = ix + 1; iy < pa; iy++) { /* first calculate the product */ r = ((mp_word)tmpx) * ((mp_word)a->dp[iy]); /* now calculate the double precision result, note we use * addition instead of *2 since it's easier to optimize */ r = ((mp_word) *tmpt) + r + r + ((mp_word) u); /* store lower part */ *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK)); /* get carry */ u = (mp_digit)(r >> ((mp_word) DIGIT_BIT)); } /* propagate upwards */ while (u != ((mp_digit) 0)) { r = ((mp_word) *tmpt) + ((mp_word) u); *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK)); u = (mp_digit)(r >> ((mp_word) DIGIT_BIT)); } } mp_clamp (&t); mp_exch (&t, b); mp_clear (&t); return MP_OKAY; } /* End: bn_s_mp_sqr.c */ /* Start: bn_s_mp_sub.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* low level subtraction (assumes |a| > |b|), HAC pp.595 Algorithm 14.9 */ int s_mp_sub (mp_int * a, mp_int * b, mp_int * c) { int olduse, res, min, max; /* find sizes */ min = b->used; max = a->used; /* init result */ if (c->alloc < max) { if ((res = mp_grow (c, max)) != MP_OKAY) { return res; } } olduse = c->used; c->used = max; { register mp_digit u, *tmpa, *tmpb, *tmpc; register int i; /* alias for digit pointers */ tmpa = a->dp; tmpb = b->dp; tmpc = c->dp; /* set carry to zero */ u = 0; for (i = 0; i < min; i++) { /* T[i] = A[i] - B[i] - U */ *tmpc = *tmpa++ - *tmpb++ - u; /* U = carry bit of T[i] * Note this saves performing an AND operation since * if a carry does occur it will propagate all the way to the * MSB. As a result a single shift is enough to get the carry */ u = *tmpc >> ((mp_digit)(CHAR_BIT * sizeof (mp_digit) - 1)); /* Clear carry from T[i] */ *tmpc++ &= MP_MASK; } /* now copy higher words if any, e.g. if A has more digits than B */ for (; i < max; i++) { /* T[i] = A[i] - U */ *tmpc = *tmpa++ - u; /* U = carry bit of T[i] */ u = *tmpc >> ((mp_digit)(CHAR_BIT * sizeof (mp_digit) - 1)); /* Clear carry from T[i] */ *tmpc++ &= MP_MASK; } /* clear digits above used (since we may not have grown result above) */ for (i = c->used; i < olduse; i++) { *tmpc++ = 0; } } mp_clamp (c); return MP_OKAY; } /* End: bn_s_mp_sub.c */ /* Start: bncore.c */ /* LibTomMath, multiple-precision integer library -- Tom St Denis * * LibTomMath is a library that provides multiple-precision * integer arithmetic as well as number theoretic functionality. * * The library was designed directly after the MPI library by * Michael Fromberger but has been written from scratch with * additional optimizations in place. * * The library is free for all purposes without any express * guarantee it works. * * Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org */ #include /* Known optimal configurations CPU /Compiler /MUL CUTOFF/SQR CUTOFF ------------------------------------------------------------- Intel P4 /GCC v3.2 / 70/ 108 AMD Athlon XP /GCC v3.2 / 109/ 127 */ /* configured for a AMD XP Thoroughbred core with etc/tune.c */ int KARATSUBA_MUL_CUTOFF = 109, /* Min. number of digits before Karatsuba multiplication is used. */ KARATSUBA_SQR_CUTOFF = 127, /* Min. number of digits before Karatsuba squaring is used. */ TOOM_MUL_CUTOFF = 350, /* no optimal values of these are known yet so set em high */ TOOM_SQR_CUTOFF = 400; /* End: bncore.c */ /* EOF */