1
0
mirror of https://github.com/f4exb/sdrangel.git synced 2024-11-11 10:56:12 -05:00
sdrangel/sdrbase/resources/webapi/doc/swagger/include/AudioCATSISO.yaml

143 lines
3.4 KiB
YAML
Raw Normal View History

2023-04-15 12:01:27 -04:00
AudioCATSISOSettings:
description: AudioCATSISO
properties:
rxCenterFrequency:
type: integer
format: int64
txCenterFrequency:
type: integer
format: int64
transverterMode:
type: integer
transverterDeltaFrequency:
type: integer
format: int64
iqOrder:
type: integer
description: >
IQ samples order
* 0 - Q then I (swapped)
* 1 - I then Q (straight)
txEnable:
type: integer
description: >
Enable or disable transmission
* 0 - Disable transmission
* 1 - Enable transmission
pttSpectrumLink:
type: integer
description: >
Main spectrum display (Rx/Tx) follows PTT (GUI)
* 0 - Disable PTT following
* 1 - Enable PTT following
2023-04-15 12:01:27 -04:00
rxDeviceName:
description: The name of the input audio device
type: string
rxIQMapping:
type: integer
description: >
Audio channel to IQ mapping
* 0 - I=L, Q=R
* 1 - I=R, Q=L
* 2 - I=L, Q=0
* 3 - I=R, Q=0
log2Decim:
description: Decimation factor (Rx)
type: integer
fcPosRx:
type: integer
description: >
Decimated bandpass center frequency position
* 0 - Infradyne
* 1 - Supradyne
* 2 - Centered
dcBlock:
type: integer
description: >
Auto DC blocking
* 0 - Off
* 1 - On
iqCorrection:
type: integer
description: >
Auto IQ balance (you need auto DC blocking active)
* 0 - Off
* 1 - On
rxVolume:
type: number
format: float
txDeviceName:
description: The name of the output audio device
type: string
txIQMapping:
type: integer
description: >
Audio channel to IQ mapping
* 0 - I=L, Q=R
* 1 - I=R, Q=L
txVolume:
2023-06-11 20:09:35 -04:00
type: integer
description: Tx volume in dB usually negative
catSpeedIndex:
type: integer
descriptoion: >
CAT serial link baud rate
* 0 - 1200
* 1 - 2400
* 2 - 4800
* 3 - 9800
* 4 - 19200 (default)
* 5 - 38400
* 6 - 57600
* 7 - 115200
catDataBitsIndex:
type: integer
description: >
CAT serial link data bits
* 0 - 7
* 1 - 8 (default)
catStopBitsIndex:
type: integer
description: >
CAT serial linkj stop bits
* 0 - 1 (default)
* 1 - 2
catHandshakeIndex:
type: integer
description: >
CAT serial link handshake type
* 0 - none (default)
* 1 - XON/XOFF
* 2 - hardware
catPTTMethodIndex:
type: integer
description: >
CAT PTT metgod
* 0 - PTT (default)
* 1 - DTR
* 2 - RTS
catDTRHigh:
type: integer
description: >
CAT DTR control
* 0 - low
* 1 - high (default)
catRTSHigh:
type: integer
description: >
CAT RTS control
* 0 - low
* 1 - high (default)
catPollingMs:
type: integer
description: CAT frequency polling interval in milliseconds
2023-04-15 12:01:27 -04:00
useReverseAPI:
description: Synchronize with reverse API (1 for yes, 0 for no)
type: integer
reverseAPIAddress:
type: string
reverseAPIPort:
type: integer
reverseAPIDeviceIndex:
type: integer