sdrangel/sdrbase/resources/webapi/doc/swagger/include/WDSPRx.yaml

WDSPRxSettings:
  description: WDSPRx
  properties:
    inputFrequencyOffset:
      type: integer
      format: int64
    profileIndex:
      type: integer
    demod:
      type: integer
      description: >
        Demodulator type:
          * 0 - SSB
          * 1 - AM
          * 2 - SAM
          * 3 - FM
    volume:
      type: number
      format: float
    audioBinaural:
      description: Audio binaural mode (1 if active else 0)
      type: integer
    audioFlipChannels:
      description: Flip audio channels (1 if flipped else 0)
      type: integer
    dsb:
      description: Double sidebands mode (1 if DSB else 0)
      type: integer
    audioMute:
      description: Mute audio (1 if muted else 0)
      type: integer
    agc:
      description: AGC (1 if AGC active else 0)
      type: integer
    agcMode:
      type: integer
      description: >
        AGC Mode:
          * 0 - Long
          * 1 - Slow
          * 2 - Medium
          * 3 - Fast
    agcGain:
      type: integer
      description: Top gain level
    agcSlope:
      type: integer
      description: Slope in centi-Bels
    agcHangThreshold:
      type: integer
    dnb:
      type: integer
      description: >
        Digital Noise Blanker:
          * 0 - Off
          * 1 - On
    nbScheme:
      type: integer
      description: >
        Noise blanker scheme:
          * 0 - NB or Preemptive Wideband Noise Blanker
          * 1 - NB2 or Interpolating Wideband Noise Blanker
    nb2Mode:
      type: integer
      description: >
        NB2 Noise blanking mode:
          * 0 - Zero mode (estimate as zero)
          * 1 - Sample‐hold (take the value of non‐corrupt signal at the beginning of the impulse and hold that throughout the corrupt sequence)
          * 2 - Mean‐hold (average the non‐corrupt values at the beginning and end of the corrupt sequence and use that as the estimate during the corrupt sequence)
          * 3 - hold‐sample (take the value of non‐corrupt signal at the end of the impulse and hold that throughout the corrupt sequence)
          * 4 - linearly interpolate across the corrupt sequence.
    nbSlewTime:
      type: number
      format: float
      description: Advance slew time (s)
    nbLeadTime:
      type: number
      format: float
      description: Advance time (s)
    nbLagTime:
      type: number
      format: float
      description: Hang time (S)
    nbThreshold:
      type: integer
    nbAvgTime:
      type: number
      format: float
    dnr:
      type: integer
      description: >
        Digital Noise Reduction:
          * 0 - Off
          * 1 - On
    anf:
      type: integer
      description: >
        Automatic Notch Filter:
          * 0 - Off
          * 1 - On
    nrScheme:
      type: integer
      description: >
        Noise Reduction Scheme:
          * 0 - NR or LMS Noise Reduction
          * 1 - NR2 or Spectral Noise Reduction
    nr2Gain:
      type: integer
      description: >
        Noise Reduction gain for NR2:
          * 0 - Linear
          * 1 - Log
          * 2 - Gamma
    nr2NPE:
      type: integer
      description: >
        Noise Power Estimation algorithm for NR2:
          * 0 - Optimal Smoothing Minimum Statistics (OSMS)
          * 1 - Minimum Mean‐Square Error (MMSE)
    nrPosition:
      type: integer
      description: >
        Noise reduction position:
          * 0 - Before AGC
          * 1 - After AGC
    nr2ArtifactReduction:
      type: integer
      description: >
        NR2 artifacts reduction:
          * 0 - Off
          * 1 - On
    amFadeLevel:
      type: integer
      description: >
        AM fade levelling:
          * 0 - Off
          * 1 - On
    cwPeaking:
      type: integer
      description: >
        CW peaking filter:
          * 0 - Off
          * 1 - On
    cwPeakFrequency:
      type: number
      format: float
      description: >
        CW peaking filter center frequency (Hz)
    cwBandwidth:
      type: number
      format: float
      description: >
        CW peaking filter bandwidth (Hz)
    cwGain:
      type: number
      format: float
      description: >
        CW peaking filter gain (linear)
    fmDeviation:
      type: number
      format: float
      description: >
        FM demodulator deviation (Hz)
    fmAFLow:
      type: number
      format: float
      description: >
        FM Audio filter low cutoff frequency (HZ)
    fmAFHigh:
      type: number
      format: float
      description: >
        FM Audio filter high cutoff frequency (HZ)
    fmAFLimiter:
      type: integer
      description: >
        FM Audio level limiter (audio AGC)
          * 0 - Off
          * 1 - On
    fmAFLimiterGain:
      type: number
      format: float
      description: >
        FM Audio level limiter top gain (Audio AGC top gain)
    fmCTCSSNotch:
      type: integer
      description: >
        FM CTCSS notch filter
          * 0 - Off
          * 1 - On
    fmCTCSSNotchFrequency:
      type: number
      format: float
      description: >
        FM CTCSS notch filter frequency (Hz)
    squelch:
      type: integer
      description: >
        Squelch:
          * 0 - Off
          * 1 - On
    squelchThreshold:
      type: integer
      description: Squelch threshold (percent)
    squelchMode:
      type: integer
      description: >
        Squelch mode:
          * 0 - Voice squelch (for SSB). Based on voice artifacts.
          * 1 - AM squelch (for AM, SAM, CW). Signal power based.
          * 2 - FM squelch (for FM). Demod noise based squelch
    ssqlTauMute:
      type: number
      format: float
      description: Voice squelch tau mute (s)
    ssqlTauUnmute:
      type: number
      format: float
      description: Voice squelch tau unmute (s)
    amsqMaxTail:
      type: number
      format: float
      description: AM squelch max tail length (s)
    equalizer:
      type: integer
      description: >
        AF equalizer:
          * 0 - Off
          * 1 - On
    eqF:
      description: Frequency points (Hz). Position 0 is preamp then 10 frequency points
      type: array
      items:
        type: number
        format: float
    eqG:
      description: Frequency points gains (dB). Position 0 is for preamp gain then for the 10 frequency points
      type: array
      items:
        type: number
        format: float
    rit:
      type: integer
      description: >
        RIT:
          * 0 - Off
          * 1 - On
    ritFrequency:
      type: number
      format: float
      description: RIT shift frequency (Hz)
    spanLog2:
      type: integer
    rfBandwidth:
      type: number
      format: float
    lowCutoff:
      type: number
      format: float
    fftWindow:
      type: integer
      description: >
        FFT Window index (FFTWindow::Function):
          * 0 - Blackman-Harris 4 term
          * 1 - Blackman-Harris 7 term
    rgbColor:
      type: integer
    title:
      type: string
    audioDeviceName:
      type: string
    streamIndex:
      description: MIMO channel. Not relevant when connected to SI (single Rx).
      type: integer
    useReverseAPI:
      description: Synchronize with reverse API (1 for yes, 0 for no)
      type: integer
    reverseAPIAddress:
      type: string
    reverseAPIPort:
      type: integer
    reverseAPIDeviceIndex:
      type: integer
    reverseAPIChannelIndex:
      type: integer
    spectrumConfig:
      $ref: "/doc/swagger/include/GLSpectrum.yaml#/GLSpectrum"
    channelMarker:
      $ref: "/doc/swagger/include/ChannelMarker.yaml#/ChannelMarker"
    rollupState:
      $ref: "/doc/swagger/include/RollupState.yaml#/RollupState"

WDSPRxReport:
  description: WDSPRx
  properties:
    channelPowerDB:
      description: power received in channel (dB)
      type: number
      format: float
    squelch:
      description: Audio squelch status (1 if open else 0)
      type: integer
    audioSampleRate:
      type: integer
    channelSampleRate:
      type: integer