sdrangel/sdrbase/resources/webapi/doc/swagger/include/LimeRFE.yaml

LimeRFESettings:
  description: LimeRFE
  properties:
    devicePath:
      description: Path to the device serial interface (ex /dev/ttyUSB2)
      type: string
    rxChannels:
      type: integer
      description: >
        Rx channels group (LimeRFEController::ChannelGroups):
          * 0 - Wideband
          * 1 - HAM
          * 2 - cellular
    rxWidebandChannel:
      type: integer
      description: >
        Rx wideband channel selection (LimeRFEController::WidebandChannel)
          * 0 - Low: 1 - 1000 MHz
          * 1 - High: 1 - 4 GHz
    rxHAMChannel:
      type: integer
      description: >
        Rx HAM channel selection (LimeRFEController::HAMChannel)
          * 0 - 30 MHz and lower
          * 1 - 50 - 70 MHz
          * 2 - 144 - 146 MHz
          * 3 - 220 - 225 MHz
          * 4 - 430 - 440 MHz
          * 5 - 902 - 928 MHz
          * 6 - 1240 - 1325 MHz
          * 7 - 2300 - 2450 MHz
          * 8 - 3300 - 3500 MHz
    rxCellularChannel:
      type: integer
      description: >
        Rx cellular channel selection (LimeRFEController::CellularChannel)
          * 0 - Band 1: 1.92 - 1.98 GHz
          * 1 - Band 2: 1.84 - 1.92 GHz
          * 2 - Band 3: 1.71 - 1.79 GHz
          * 3 - Band 7: 2.48 - 2.58 GHz
          * 4 - Band 38: 2.56 - 2.63 GHz
    rxPort:
      type: integer
      description: >
        Rx port selected (LimeRFEController::RxPort)
          * 0 - J3
          * 1 - J5
    attenuationFactor:
      description: Rx attenuation factor. Attenuation is 2 times this factor in dB (0..7 => 0..14dB)
      type: integer
    amfmNotch:
      desciption: Rx AM/FM notch filter (boolean)
      type: integer
    txChannels:
      type: integer
      description: >
        Tx channels group (LimeRFEController::ChannelGroups)
          * 0 - Wideband
          * 1 - HAM
          * 2 - cellular
    txWidebandChannel:
      type: integer
      description: >
        Tx wideband channel selection (LimeRFEController::WidebandChannel)
          * 0 - Low: 1 - 1000 MHz
          * 1 - High: 1 - 4 GHz
    txHAMChannel:
      type: integer
      description: >
        Tx HAM channel selection (LimeRFEController::HAMChannel)
          * 0 - 30 MHz and lower
          * 1 - 50 - 70 MHz
          * 2 - 144 - 146 MHz
          * 3 - 220 - 225 MHz
          * 4 - 430 - 440 MHz
          * 5 - 902 - 928 MHz
          * 6 - 1240 - 1325 MHz
          * 7 - 2300 - 2450 MHz
          * 8 - 3300 - 3500 MHz
    txCellularChannel:
      type: integer
      description: >
        Tx cellular channel selection (LimeRFEController::CellularChannel)
          * 0 - Band 1: 1.92 - 1.98 GHz
          * 1 - Band 2: 1.84 - 1.92 GHz
          * 2 - Band 3: 1.71 - 1.79 GHz
          * 3 - Band 7: 2.48 - 2.58 GHz
          * 4 - Band 38: 2.56 - 2.63 GHz
    txPort:
      type: integer
      description: >
        Tx port selected (LimeRFEController::TxPort)
          * 0 - J3
          * 1 - J4
          * 2 - J5
    swrEnable:
      description: Boolean if SWR measurements are enabled else 0
      type: integer
    swrSource:
      type: integer
      description: >
        SWR measurement source (LimeRFEController::SWRSource)
          * 0 - External
          * 1 - Cellular
    rxOn:
      description: Boolean 1 if Rx is active else 0
      type: integer
    txOn:
      description: Boolean 1 if Tx is active else 0
      type: integer

LimeRFEPower:
  description: report of forward and reflected power measurements
  properties:
    forward:
      description: relative forward power in centi-Bels
      type: integer
    reflected:
      description: relative reflected power in centi-Bels
      type: integer