ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
///////////////////////////////////////////////////////////////////////////////////
|
|
|
|
// Copyright (C) 2020 Jon Beniston, M7RCE //
|
|
|
|
// //
|
|
|
|
// This program is free software; you can redistribute it and/or modify //
|
|
|
|
// it under the terms of the GNU General Public License as published by //
|
|
|
|
// the Free Software Foundation as version 3 of the License, or //
|
|
|
|
// (at your option) any later version. //
|
|
|
|
// //
|
|
|
|
// This program is distributed in the hope that it will be useful, //
|
|
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of //
|
|
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the //
|
|
|
|
// GNU General Public License V3 for more details. //
|
|
|
|
// //
|
|
|
|
// You should have received a copy of the GNU General Public License //
|
|
|
|
// along with this program. If not, see <http://www.gnu.org/licenses/>. //
|
|
|
|
///////////////////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
|
|
#ifndef INCLUDE_OSNDB_H
|
|
|
|
#define INCLUDE_OSNDB_H
|
|
|
|
|
|
|
|
#include <QString>
|
|
|
|
#include <QHash>
|
|
|
|
#include <QList>
|
|
|
|
#include <QDebug>
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
#include <QIcon>
|
|
|
|
#include <QMutex>
|
|
|
|
#include <QStandardPaths>
|
2023-02-14 09:46:08 -05:00
|
|
|
#include <QDateTime>
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
2021-11-04 08:33:43 -04:00
|
|
|
#include "util/csv.h"
|
2023-02-14 09:46:08 -05:00
|
|
|
#include "util/httpdownloadmanager.h"
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
#include "export.h"
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2022-02-04 11:57:45 -05:00
|
|
|
#define OSNDB_URL "https://opensky-network.org/datasets/metadata/aircraftDatabase.zip"
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
struct SDRBASE_API AircraftInformation {
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
|
|
|
int m_icao;
|
|
|
|
QString m_registration;
|
|
|
|
QString m_manufacturerName;
|
|
|
|
QString m_model;
|
|
|
|
QString m_owner;
|
|
|
|
QString m_operator;
|
|
|
|
QString m_operatorICAO;
|
|
|
|
QString m_registered;
|
|
|
|
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
static void init()
|
|
|
|
{
|
|
|
|
QMutexLocker locker(&m_mutex);
|
2023-02-14 09:46:08 -05:00
|
|
|
if (!m_prefixMap)
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
{
|
2023-02-14 09:46:08 -05:00
|
|
|
// Read registration prefix to country map
|
|
|
|
m_prefixMap = CSV::hash(":/flags/regprefixmap.csv");
|
|
|
|
// Read operator air force to military map
|
|
|
|
m_militaryMap = CSV::hash(":/flags/militarymap.csv");
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
}
|
2023-02-14 09:46:08 -05:00
|
|
|
}
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
// Get flag based on registration
|
|
|
|
QString getFlag() const;
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
static QString getAirlineIconPath(const QString &operatorICAO);
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
// Try to find an airline logo based on ICAO
|
|
|
|
static QIcon *getAirlineIcon(const QString &operatorICAO);
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
static QString getFlagIconPath(const QString &country);
|
2023-05-15 11:40:43 -04:00
|
|
|
static QString getFlagIconURL(const QString &country);
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
// Try to find an flag logo based on a country
|
|
|
|
static QIcon *getFlagIcon(const QString &country);
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
private:
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
static QHash<QString, QIcon *> m_airlineIcons; // Hashed on airline ICAO
|
|
|
|
static QHash<QString, bool> m_airlineMissingIcons; // Hash containing which ICAOs we don't have icons for
|
|
|
|
static QHash<QString, QIcon *> m_flagIcons; // Hashed on country
|
|
|
|
static QHash<QString, QString> *m_prefixMap; // Registration to country (flag name)
|
|
|
|
static QHash<QString, QString> *m_militaryMap; // Operator airforce to military (flag name)
|
|
|
|
static QMutex m_mutex;
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
};
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
class SDRBASE_API OsnDB : public QObject {
|
|
|
|
Q_OBJECT
|
|
|
|
|
|
|
|
public:
|
|
|
|
|
|
|
|
OsnDB(QObject* parent=nullptr);
|
|
|
|
~OsnDB();
|
|
|
|
|
|
|
|
void downloadAircraftInformation();
|
|
|
|
|
|
|
|
static QSharedPointer<const QHash<int, AircraftInformation *>> getAircraftInformation();
|
|
|
|
static QSharedPointer<const QHash<QString, AircraftInformation *>> getAircraftInformationByReg();
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
|
|
|
|
static QString getOSNDBZipFilename()
|
|
|
|
{
|
|
|
|
return getDataDir() + "/aircraftDatabase.zip";
|
|
|
|
}
|
|
|
|
|
|
|
|
static QString getOSNDBFilename()
|
|
|
|
{
|
|
|
|
return getDataDir() + "/aircraftDatabase.csv";
|
|
|
|
}
|
|
|
|
|
|
|
|
static QString getDataDir()
|
|
|
|
{
|
|
|
|
// Get directory to store app data in (aircraft & airport databases and user-definable icons)
|
|
|
|
QStringList locations = QStandardPaths::standardLocations(QStandardPaths::AppDataLocation);
|
|
|
|
// First dir is writable
|
|
|
|
return locations[0];
|
|
|
|
}
|
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
private:
|
|
|
|
HttpDownloadManager m_dlm;
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
static QSharedPointer<const QHash<int, AircraftInformation *>> m_aircraftInformation;
|
|
|
|
static QSharedPointer<const QHash<QString, AircraftInformation *>> m_aircraftInformationByReg;
|
|
|
|
static QDateTime m_modifiedDateTime;
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
// Write a reduced size and validated version of the DB, so it loads quicker
|
|
|
|
static bool writeFastDB(const QString &filename, const QHash<int, AircraftInformation *> *aircraftInfo);
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
// Read smaller CSV file with no validation. Takes about 0.5s instead of 2s.
|
|
|
|
static QHash<int, AircraftInformation *> *readFastDB(const QString &filename);
|
|
|
|
|
|
|
|
// Read OpenSky Network CSV file
|
|
|
|
// This is large and contains lots of data we don't want, so we convert to
|
|
|
|
// a smaller version to speed up loading time
|
|
|
|
// Note that we use C file functions rather than QT, as these are ~30% faster
|
|
|
|
// and the QT version seemed to occasionally crash
|
|
|
|
static QHash<int, AircraftInformation *> *readOSNDB(const QString &filename);
|
|
|
|
|
|
|
|
static QString getFastDBFilename()
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
{
|
2023-02-14 09:46:08 -05:00
|
|
|
return getDataDir() + "/aircraftDatabaseFast.csv";
|
ADS-B: Add support for decoding Comm-B replies in Mode-S frames. This adds TAS, IAS, Mach, Selelected Alt, Selected Heading, Turn rate, Roll angle, Autopilot enabled, Vertical and lateral navigation modes, Baro setting, Headwind, OAT, Wind speed and direction, Pressure, Static air temperature, Humidity.
2022-08-26 07:35:12 -04:00
|
|
|
}
|
|
|
|
|
2023-02-14 09:46:08 -05:00
|
|
|
// Create hash table using registration as key
|
|
|
|
static QHash<QString, AircraftInformation *> *registrationHash(const QHash<int, AircraftInformation *> *in);
|
|
|
|
|
|
|
|
private slots:
|
|
|
|
void downloadFinished(const QString& filename, bool success);
|
|
|
|
|
|
|
|
signals:
|
|
|
|
void downloadingURL(const QString& url);
|
|
|
|
void downloadError(const QString& error);
|
|
|
|
void downloadProgress(qint64 bytesReceived, qint64 bytesTotal);
|
|
|
|
void downloadAircraftInformationFinished();
|
|
|
|
|
ADS-B Demodulator updates.
Add OpenSky Network aircraft database support, for information about
aircraft model, owner, registration.
Add airline logos and country & military flags for display in the table.
Add OurAirports airport database support, to allow airports and ATC
frequencies to be displayed on the map.
Allow ATC frequency to be tuned by clicking on the map.
Add support for displaying flight paths on the map.
Allow columns in table to be rearranged and hidden.
Allow rows in table to be sorted by clicking on header.
Allow switching units from ft, kn, ft/min to m, kph, m/s
Allow aircraft timeout to be set by the user.
Allow font used for the table to be set by the user.
Add optional display of demodulator statistics.
Support multithreading in demodulator to reduce FIFO overflows.
Add support for demodulating all Mode-S frames and feeding them.
Add support for feeding in Beast hex format.
Allow option of correlating against full preamble or partial preamble.
Supporting highlighting of an aircraft in the table by selecting it on
the map.
Use difference of zeros and ones correlation, rather than absolute
threshold, to better account for varying conditions and make the
threshold easier to set.
Enable anti-aliasing for text on the map.
Improve CRC performance by 5x-10x.
Add HttpDownloadManager class to support downloading of files from the
web to disk.
2020-11-06 07:18:55 -05:00
|
|
|
};
|
|
|
|
|
|
|
|
#endif
|
2023-02-14 09:46:08 -05:00
|
|
|
|