sdrangel/sdrbase/resources/webapi/doc/swagger/include/DSDDemod.yaml

DSDDemodSettings:
  description: DSDDemod
  properties:
    inputFrequencyOffset:
      type: integer
      format: int64
    rfBandwidth:
      type: number
      format: float
    fmDeviation:
      type: number
      format: float
    demodGain:
      type: number
      format: float
    volume:
      type: number
      format: float
    baudRate:
      type: integer
    squelchGate:
      type: integer
    squelch:
      type: number
      format: float
    audioMute:
      type: integer
    enableCosineFiltering:
      type: integer
    syncOrConstellation:
      type: integer
    slot1On:
      type: integer
    slot2On:
      type: integer
    tdmaStereo:
      type: integer
    pllLock:
      type: integer
    rgbColor:
      type: integer
    title:
      type: string
    audioDeviceName:
      type: string
    highPassFilter:
      type: integer
    traceLengthMutliplier:
      description: multiply by 50ms
      type: integer
    traceStroke:
      description: 0 to 255
      type: integer
    traceDecay:
      description: 0 to 255
      type: integer
    streamIndex:
      description: MIMO channel. Not relevant when connected to SI (single Rx).
      type: integer
    useReverseAPI:
      description: Synchronize with reverse API (1 for yes, 0 for no)
      type: integer
    reverseAPIAddress:
      type: string
    reverseAPIPort:
      type: integer
    reverseAPIDeviceIndex:
      type: integer
    reverseAPIChannelIndex:
      type: integer

DSDDemodReport:
  description: DSDDemod
  properties:
    channelPowerDB:
      description: power transmitted in channel (dB)
      type: number
      format: float
    audioSampleRate:
      type: integer
    channelSampleRate:
      type: integer
    squelch:
      description: squelch status (1 if open else 0)
      type: integer
    pllLocked:
      description: symbol PLL status (1 if locked else 0)
      type: integer
    slot1On:
      description: slot 1 status (1 if voice active else 0)
      type: integer
    slot2On:
      description: slot 2 status (1 if voice active else 0)
      type: integer
    syncType:
      description: type of frame synchronized
      type: string
    inLevel:
      description: decoder input level after discriminator. Percent of mid scale (aim 100).
      type: integer
    carierPosition:
      description: position of carrier relative to discriminator center. Percent of scale (aim 0).
      type: integer
    zeroCrossingPosition:
      description: position of symbol synchronizer zero crossing in number of samples (aim 0).
      type: integer
    syncRate:
      description: successful synchronization rate. Percent of expected symbols (aim 100).
      type: integer
    statusText:
      description: mode dependent status messages (ref UI documentation)
      type: string