From 15433bb324b2a41e137e0af014e9407ed8eec5ea Mon Sep 17 00:00:00 2001 From: Daniele Forsi Date: Fri, 26 Apr 2024 11:32:32 +0200 Subject: [PATCH] Fix spellling errors found with LibreOffice Writer --- plugins/channelrx/demodadsb/readme.md | 2 +- plugins/channelrx/demodatv/readme.md | 2 +- plugins/channelrx/demoddsd/readme.md | 2 +- plugins/channelrx/demodm17/readme.md | 2 +- plugins/channelrx/demodssb/readme.md | 2 +- plugins/channelrx/filesink/readme.md | 2 +- plugins/channelrx/radioastronomy/readme.md | 2 +- plugins/channelrx/udpsink/readme.md | 2 +- plugins/feature/map/readme.md | 2 +- plugins/samplesource/androidsdrdriverinput/readme.md | 2 +- sdrgui/feature/readme.md | 2 +- sdrsrv/readme.md | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) diff --git a/plugins/channelrx/demodadsb/readme.md b/plugins/channelrx/demodadsb/readme.md index e19dfa913..5b89a0e1c 100644 --- a/plugins/channelrx/demodadsb/readme.md +++ b/plugins/channelrx/demodadsb/readme.md @@ -104,7 +104,7 @@ Checking this button draws flight paths for all aircraft.

ATC Mode

-When in ATC mode, the map will display callsign, alitude, ground speed and type for all aircraft. When unchecked, only callsign (or ICAO, until callsign is received) will be displayed. +When in ATC mode, the map will display callsign, altitude, ground speed and type for all aircraft. When unchecked, only callsign (or ICAO, until callsign is received) will be displayed.

15: Download flight information for selected flight

diff --git a/plugins/channelrx/demodatv/readme.md b/plugins/channelrx/demodatv/readme.md index aab220e73..db13e20b3 100644 --- a/plugins/channelrx/demodatv/readme.md +++ b/plugins/channelrx/demodatv/readme.md @@ -28,7 +28,7 @@ Each part is detailed next

1: Frequency shift from center frequency of reception

-Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows.Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. +Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2.

2: Channel sample rate

diff --git a/plugins/channelrx/demoddsd/readme.md b/plugins/channelrx/demoddsd/readme.md index b146c08ca..e2b176f18 100644 --- a/plugins/channelrx/demoddsd/readme.md +++ b/plugins/channelrx/demoddsd/readme.md @@ -43,7 +43,7 @@ The top and bottom bars of the channel window are described [here](../../../sdrg

A.1: Frequency shift from center frequency of reception

-Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows.Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. +Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2.

A.2: Channel bandwidth before discriminator

diff --git a/plugins/channelrx/demodm17/readme.md b/plugins/channelrx/demodm17/readme.md index c8a203946..148bf8601 100644 --- a/plugins/channelrx/demodm17/readme.md +++ b/plugins/channelrx/demodm17/readme.md @@ -26,7 +26,7 @@ There are 3 main sections

A.1: Frequency shift from center frequency of reception

-Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows.Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. +Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2.

A.2: Channel bandwidth before discriminator

diff --git a/plugins/channelrx/demodssb/readme.md b/plugins/channelrx/demodssb/readme.md index c7ec86423..2f0a2f6f8 100644 --- a/plugins/channelrx/demodssb/readme.md +++ b/plugins/channelrx/demodssb/readme.md @@ -219,7 +219,7 @@ The signal power is calculated as the moving average over the AGC time constant Active only in AGC mode with squelch enabled. -To avoid unwanted squelch opening on short transient bursts only signals with power above threshold during this period in milliseconds will open the squelch.It can be varied from 0 to 20 ms in 1 ms steps then from 30 to 500 ms in 10 ms steps. +To avoid unwanted squelch opening on short transient bursts only signals with power above threshold during this period in milliseconds will open the squelch. It can be varied from 0 to 20 ms in 1 ms steps then from 30 to 500 ms in 10 ms steps. When the power threshold is close to the noise floor a few milliseconds help in preventing noise power wiggle to open the squelch. diff --git a/plugins/channelrx/filesink/readme.md b/plugins/channelrx/filesink/readme.md index 9982606cb..f02287caf 100644 --- a/plugins/channelrx/filesink/readme.md +++ b/plugins/channelrx/filesink/readme.md @@ -46,7 +46,7 @@ This is the total recording time for the session.

6: Record size

-This is the total number of bytes recorded for the session.The number is possibly suffixed by a multiplier character: +This is the total number of bytes recorded for the session. The number is possibly suffixed by a multiplier character: - **k**: _kilo_ for kilobytes - **M**: _mega_ for megabytes - **G**: _giga_ for gigabytes diff --git a/plugins/channelrx/radioastronomy/readme.md b/plugins/channelrx/radioastronomy/readme.md index 8b20b3c29..8ca7e4f85 100644 --- a/plugins/channelrx/radioastronomy/readme.md +++ b/plugins/channelrx/radioastronomy/readme.md @@ -794,7 +794,7 @@ The columns in the table include: - UTC - UTC date and time at the end of the measurement. - Az (Rot) - Azimuth of rotator controller in degrees at the end of measurement. - El (Rot) - Elevation of rotator controller in degrees at the end of measurement. -- Az Off (Rot) - Azimimuth offset of rotator controller in degrees at the end of measurement. +- Az Off (Rot) - Azimuth offset of rotator controller in degrees at the end of measurement. - El Off (Rot) - Elevation offset of rotator controller in degrees at the end of measurement. Right clicking on the table shows a popup menu that supports: diff --git a/plugins/channelrx/udpsink/readme.md b/plugins/channelrx/udpsink/readme.md index 283f99a0d..fe709160a 100644 --- a/plugins/channelrx/udpsink/readme.md +++ b/plugins/channelrx/udpsink/readme.md @@ -98,7 +98,7 @@ When any item of these items is changed the button is lit in green until it is p

11: Audio volume

-Volume of the audio feedback (when se with button 12.2). +Volume of the audio feedback (when set with button 12.2).

12: Gain

diff --git a/plugins/feature/map/readme.md b/plugins/feature/map/readme.md index 17d052ac8..aa8cb4a45 100644 --- a/plugins/feature/map/readme.md +++ b/plugins/feature/map/readme.md @@ -314,7 +314,7 @@ Sea Marks are from OpenSeaMap: https://www.openseamap.org/ Railways are from OpenRailwayMap: https://www.openrailwaymap.org/ -Weather radar and satellite data is from RainViewer: https://www.rainviewer +Weather radar and satellite data is from RainViewer: https://www.rainviewer.com Icons made by Google from Flaticon: https://www.flaticon.com World icons created by turkkub from Flaticon: https://www.flaticon.com diff --git a/plugins/samplesource/androidsdrdriverinput/readme.md b/plugins/samplesource/androidsdrdriverinput/readme.md index b133caf67..0f3e53e64 100644 --- a/plugins/samplesource/androidsdrdriverinput/readme.md +++ b/plugins/samplesource/androidsdrdriverinput/readme.md @@ -1,4 +1,4 @@ -

Android SDR Driver Input Olugin

+

Android SDR Driver Input Plugin

Introduction

diff --git a/sdrgui/feature/readme.md b/sdrgui/feature/readme.md index d8a9693c3..b6ec59b3f 100644 --- a/sdrgui/feature/readme.md +++ b/sdrgui/feature/readme.md @@ -30,7 +30,7 @@ Resets the title to the feature type name.

2.3: Toggle reverse API feature

-Use this checkbox to toggle on/off the reverse API feature. With reverse API engaged the changes in the feature settings are forwarded to an API endpoint given by address (8.2.4), port (8.2.5), feature set index (8.2.6) and feature index (8.2.7) in the same format as the SDRangel REST API feature settings endpoint. With the values of the screenshot the API URL is: `http://127.0.0.1:8888/sdrangel/featureeset/0/feature/0/settings` The JSON payload follows the same format as the SDRangel REST API feature settings. Using the same example this would be: +Use this checkbox to toggle on/off the reverse API feature. With reverse API engaged the changes in the feature settings are forwarded to an API endpoint given by address (8.2.4), port (8.2.5), feature set index (8.2.6) and feature index (8.2.7) in the same format as the SDRangel REST API feature settings endpoint. With the values of the screenshot the API URL is: `http://127.0.0.1:8888/sdrangel/featureset/0/feature/0/settings` The JSON payload follows the same format as the SDRangel REST API feature settings. Using the same example this would be: ``` { diff --git a/sdrsrv/readme.md b/sdrsrv/readme.md index 1b5a34a48..a632ccbce 100644 --- a/sdrsrv/readme.md +++ b/sdrsrv/readme.md @@ -17,7 +17,7 @@ The main motivations are: - AM demodulator - BFM (Broadcast FM) demodulator - Remote sink - - DSD (Digital Vouice) demodulator + - DSD (Digital Voice) demodulator - NFM (Narrowband FM) demodulator - SSB demodulator - WFM (Wideband FM) demodulator