1
0
mirror of https://github.com/f4exb/sdrangel.git synced 2024-12-23 10:05:46 -05:00

BladeRF2: fixed MO mode by multiplying sample rate by the number of Tx channels

This commit is contained in:
f4exb 2018-09-30 23:42:52 +02:00
parent d770da9590
commit 2323d21a43
4 changed files with 65 additions and 17 deletions

View File

@ -316,6 +316,8 @@ bool BladeRF2Output::start()
bladeRF2OutputThread->setFifo(requestedChannel, &m_sampleSourceFifo);
bladeRF2OutputThread->setLog2Interpolation(requestedChannel, m_settings.m_log2Interp);
applySettings(m_settings, true); // re-apply forcibly to set sample rate with the new number of channels
if (needsStart)
{
qDebug("BladeRF2Output::start: enabling channel(s) and (re)sart buddy thread");
@ -332,8 +334,6 @@ bool BladeRF2Output::start()
bladeRF2OutputThread->startWork();
}
applySettings(m_settings, true);
qDebug("BladeRF2Output::start: started");
m_running = true;
@ -429,6 +429,13 @@ void BladeRF2Output::stop()
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_sink->setThread(0);
}
for (int i = 0; i < nbOriginalChannels-1; i++) // close all inactive channels
{
if (fifos[i] == 0) {
m_deviceShared.m_dev->closeTx(i);
}
}
m_deviceShared.m_dev->closeTx(requestedChannel); // close the last channel
if (stillActiveFIFO) {
@ -441,6 +448,8 @@ void BladeRF2Output::stop()
bladeRF2OutputThread->setFifo(requestedChannel, 0); // remove FIFO
}
applySettings(m_settings, true); // re-apply forcibly to set sample rate with the new number of channels
m_running = false;
}
@ -577,16 +586,19 @@ bool BladeRF2Output::handleMessage(const Message& message)
if (dev) // The BladeRF device must have been open to do so
{
int requestedChannel = m_deviceAPI->getItemIndex();
int nbChannels = getNbChannels();
if (report.getRxElseTx()) // Rx buddy change: check for sample rate change only
{
status = bladerf_get_sample_rate(dev, BLADERF_CHANNEL_TX(requestedChannel), &tmp_uint);
if (status < 0) {
qCritical("BladeRF2Output::handleMessage: MsgReportBuddyChange: bladerf_get_sample_rate error: %s", bladerf_strerror(status));
} else {
settings.m_devSampleRate = tmp_uint+1;
}
tmp_uint = report.getDevSampleRate();
settings.m_devSampleRate = tmp_uint / (nbChannels == 0 ? 1 : nbChannels);
// status = bladerf_get_sample_rate(dev, BLADERF_CHANNEL_TX(requestedChannel), &tmp_uint);
//
// if (status < 0) {
// qCritical("BladeRF2Output::handleMessage: MsgReportBuddyChange: bladerf_get_sample_rate error: %s", bladerf_strerror(status));
// } else {
// settings.m_devSampleRate = tmp_uint / (nbChannels == 0 ? 1 : nbChannels);
// }
}
else // Tx buddy change: check for: frequency, gain mode and value, bias tee, sample rate, bandwidth
{
@ -664,6 +676,7 @@ bool BladeRF2Output::applySettings(const BladeRF2OutputSettings& settings, bool
struct bladerf *dev = m_deviceShared.m_dev->getDev();
int requestedChannel = m_deviceAPI->getItemIndex();
int nbChannels = getNbChannels();
if ((m_settings.m_devSampleRate != settings.m_devSampleRate) || (m_settings.m_log2Interp != settings.m_log2Interp) || force)
{
@ -705,7 +718,10 @@ bool BladeRF2Output::applySettings(const BladeRF2OutputSettings& settings, bool
if (dev != 0)
{
unsigned int actualSamplerate;
int status = bladerf_set_sample_rate(dev, BLADERF_CHANNEL_TX(requestedChannel), settings.m_devSampleRate, &actualSamplerate);
int status = bladerf_set_sample_rate(dev, BLADERF_CHANNEL_TX(requestedChannel),
settings.m_devSampleRate * (nbChannels == 0 ? 1 : nbChannels),
&actualSamplerate);
if (status < 0)
{
@ -817,7 +833,7 @@ bool BladeRF2Output::applySettings(const BladeRF2OutputSettings& settings, bool
settings.m_centerFrequency,
settings.m_LOppmTenths,
2,
settings.m_devSampleRate,
settings.m_devSampleRate * (nbChannels == 0 ? 1 : nbChannels), // need to forward actual rate to the Rx side
false);
(*itSource)->getSampleSourceInputMessageQueue()->push(report);
}
@ -849,12 +865,24 @@ bool BladeRF2Output::applySettings(const BladeRF2OutputSettings& settings, bool
<< " m_bandwidth: " << m_settings.m_bandwidth
<< " m_log2Interp: " << m_settings.m_log2Interp
<< " m_devSampleRate: " << m_settings.m_devSampleRate
<< " nbChannels: " << nbChannels
<< " m_globalGain: " << m_settings.m_globalGain
<< " m_biasTee: " << m_settings.m_biasTee;
return true;
}
int BladeRF2Output::getNbChannels()
{
BladeRF2OutputThread *bladeRF2OutputThread = findThread();
if (bladeRF2OutputThread) {
return bladeRF2OutputThread->getNbChannels();
} else {
return 0;
}
}
int BladeRF2Output::webapiSettingsGet(
SWGSDRangel::SWGDeviceSettings& response,
QString& errorMessage __attribute__((unused)))

View File

@ -152,6 +152,7 @@ private:
BladeRF2OutputThread *findThread();
void moveThreadToBuddy();
bool applySettings(const BladeRF2OutputSettings& settings, bool force);
int getNbChannels();
bool setDeviceCenterFrequency(struct bladerf *dev, int requestedChannel, quint64 freq_hz);
void webapiFormatDeviceSettings(SWGSDRangel::SWGDeviceSettings& response, const BladeRF2OutputSettings& settings);
void webapiFormatDeviceReport(SWGSDRangel::SWGDeviceReport& response);

View File

@ -75,7 +75,7 @@ void BladeRF2OutputThread::run()
int status;
if (m_nbChannels > 1) {
status = bladerf_sync_config(m_dev, BLADERF_TX_X2, BLADERF_FORMAT_SC16_Q11, 64, 16384, 32, 1500);
status = bladerf_sync_config(m_dev, BLADERF_TX_X2, BLADERF_FORMAT_SC16_Q11, 128, 16384, 32, 1500);
} else {
status = bladerf_sync_config(m_dev, BLADERF_TX_X1, BLADERF_FORMAT_SC16_Q11, 64, 8192, 32, 1500);
}

View File

@ -645,12 +645,31 @@ bool BladeRF2Input::handleMessage(const Message& message)
}
else // Tx buddy change: check for sample rate change only
{
status = bladerf_get_sample_rate(dev, BLADERF_CHANNEL_RX(requestedChannel), &tmp_uint);
settings.m_devSampleRate = report.getDevSampleRate();
// status = bladerf_get_sample_rate(dev, BLADERF_CHANNEL_RX(requestedChannel), &tmp_uint);
//
// if (status < 0) {
// qCritical("BladeRF2Input::handleMessage: MsgReportBuddyChange: bladerf_get_sample_rate error: %s", bladerf_strerror(status));
// } else {
// settings.m_devSampleRate = tmp_uint;
// }
if (status < 0) {
qCritical("BladeRF2Input::handleMessage: MsgReportBuddyChange: bladerf_get_sample_rate error: %s", bladerf_strerror(status));
} else {
settings.m_devSampleRate = tmp_uint+1;
qint64 deviceCenterFrequency = DeviceSampleSource::calculateDeviceCenterFrequency(
settings.m_centerFrequency,
0,
settings.m_log2Decim,
(DeviceSampleSource::fcPos_t) settings.m_fcPos,
settings.m_devSampleRate);
if (setDeviceCenterFrequency(dev, requestedChannel, deviceCenterFrequency))
{
if (getMessageQueueToGUI())
{
int min, max, step;
getGlobalGainRange(min, max, step);
MsgReportGainRange *msg = MsgReportGainRange::create(min, max, step);
getMessageQueueToGUI()->push(msg);
}
}
}