mirror of https://github.com/f4exb/sdrangel.git
Document LO offset options
This commit is contained in:
parent
035a0ab2cb
commit
35380d4f36
|
@ -105,6 +105,10 @@ Use this slider to adjust the global gain of the Tx chain. The allowable values
|
|||
|
||||
This is the Tx hardware filter bandwidth in kHz in the AD936x device for the given channel. Use the wheels to adjust the value. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2.
|
||||
|
||||
<h3>Tx LO offset</h3>
|
||||
|
||||
This adjusts the Tx local oscillator (LO) frequency from the centre frequency by the given amount in kHz, and the NCOs are used to digitally shift the signal to the set centre frequency. This can be used to push the Tx LO leakage (which for the AD396x is -50dBc) out of band. The shift should be less than half of the sample rate.
|
||||
|
||||
<h3>12: Stream status indicator</h3>
|
||||
|
||||
This label turns green when data has been transmitted to the device.
|
||||
|
|
|
@ -118,6 +118,10 @@ Check this button to enable IQ imbalance correction.
|
|||
|
||||
This is the Rx hardware IF filter bandwidth in kHz for the given channel. Use the wheels to adjust the value. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2.
|
||||
|
||||
<h3>Rx LO offset</h3>
|
||||
|
||||
This adjusts the Rx local oscillator (LO) frequency from the centre frequency by the given amount in kHz, and the NCOs are used to digitally shift the signal to compensate. The shift should be less than half of the sample rate.
|
||||
|
||||
<h3>15: Stream status indicator</h3>
|
||||
|
||||
This label turns green when data is being received from the device.
|
||||
|
|
Loading…
Reference in New Issue