diff --git a/plugins/channelrx/demodam/amdemod.cpp b/plugins/channelrx/demodam/amdemod.cpp index 5ae96a1ac..7e2fc4704 100644 --- a/plugins/channelrx/demodam/amdemod.cpp +++ b/plugins/channelrx/demodam/amdemod.cpp @@ -218,6 +218,7 @@ void AMDemod::applySettings(const AMDemodSettings& settings, bool force) qDebug() << "AMDemod::applySettings:" << " m_inputFrequencyOffset: " << settings.m_inputFrequencyOffset << " m_rfBandwidth: " << settings.m_rfBandwidth + << " m_afBandwidth: " << settings.m_afBandwidth << " m_volume: " << settings.m_volume << " m_squelch: " << settings.m_squelch << " m_audioMute: " << settings.m_audioMute @@ -238,6 +239,9 @@ void AMDemod::applySettings(const AMDemodSettings& settings, bool force) if ((m_settings.m_rfBandwidth != settings.m_rfBandwidth) || force) { reverseAPIKeys.append("rfBandwidth"); } + if ((m_settings.m_afBandwidth != settings.m_afBandwidth) || force) { + reverseAPIKeys.append("afBandwidth"); + } if ((m_settings.m_bandpassEnable != settings.m_bandpassEnable) || force) { reverseAPIKeys.append("bandpassEnable"); } @@ -411,6 +415,9 @@ void AMDemod::webapiUpdateChannelSettings( if (channelSettingsKeys.contains("rfBandwidth")) { settings.m_rfBandwidth = response.getAmDemodSettings()->getRfBandwidth(); } + if (channelSettingsKeys.contains("afBandwidth")) { + settings.m_afBandwidth = response.getAmDemodSettings()->getAfBandwidth(); + } if (channelSettingsKeys.contains("rgbColor")) { settings.m_rgbColor = response.getAmDemodSettings()->getRgbColor(); } @@ -483,6 +490,7 @@ void AMDemod::webapiFormatChannelSettings(SWGSDRangel::SWGChannelSettings& respo response.getAmDemodSettings()->setAudioMute(settings.m_audioMute ? 1 : 0); response.getAmDemodSettings()->setInputFrequencyOffset(settings.m_inputFrequencyOffset); response.getAmDemodSettings()->setRfBandwidth(settings.m_rfBandwidth); + response.getAmDemodSettings()->setAfBandwidth(settings.m_afBandwidth); response.getAmDemodSettings()->setRgbColor(settings.m_rgbColor); response.getAmDemodSettings()->setSquelch(settings.m_squelch); response.getAmDemodSettings()->setVolume(settings.m_volume); @@ -634,6 +642,9 @@ void AMDemod::webapiFormatChannelSettings( if (channelSettingsKeys.contains("rfBandwidth") || force) { swgAMDemodSettings->setRfBandwidth(settings.m_rfBandwidth); } + if (channelSettingsKeys.contains("afBandwidth") || force) { + swgAMDemodSettings->setAfBandwidth(settings.m_afBandwidth); + } if (channelSettingsKeys.contains("rgbColor") || force) { swgAMDemodSettings->setRgbColor(settings.m_rgbColor); } diff --git a/plugins/channelrx/demodam/amdemodgui.cpp b/plugins/channelrx/demodam/amdemodgui.cpp index 2f1230aaf..a020f5a58 100644 --- a/plugins/channelrx/demodam/amdemodgui.cpp +++ b/plugins/channelrx/demodam/amdemodgui.cpp @@ -160,10 +160,18 @@ void AMDemodGUI::on_bandpassEnable_toggled(bool checked) void AMDemodGUI::on_rfBW_valueChanged(int value) { - ui->rfBWText->setText(QString("%1 kHz").arg(value / 10.0, 0, 'f', 1)); - m_channelMarker.setBandwidth(value * 100); - m_settings.m_rfBandwidth = value * 100; - applySettings(); + ui->rfBWText->setText(QString("%1 kHz").arg(value / 10.0, 0, 'f', 1)); + m_channelMarker.setBandwidth(value * 100); + m_settings.m_rfBandwidth = value * 100; + ui->afBW->setMaximum(value); + applySettings(); +} + +void AMDemodGUI::on_afBW_valueChanged(int value) +{ + ui->afBWText->setText(QString("%1 kHz").arg(value / 10.0, 0, 'f', 1)); + m_settings.m_afBandwidth = value * 100; + applySettings(); } void AMDemodGUI::on_volume_valueChanged(int value) @@ -354,6 +362,10 @@ void AMDemodGUI::displaySettings() ui->rfBW->setValue(displayValue); ui->rfBWText->setText(QString("%1 kHz").arg(displayValue / 10.0, 0, 'f', 1)); + displayValue = m_settings.m_afBandwidth / 100.0; + ui->afBW->setValue(displayValue); + ui->afBWText->setText(QString("%1 kHz").arg(displayValue / 10.0, 0, 'f', 1)); + ui->volume->setValue(m_settings.m_volume * 10.0); ui->volumeText->setText(QString("%1").arg(m_settings.m_volume, 0, 'f', 1)); @@ -503,6 +515,7 @@ void AMDemodGUI::makeUIConnections() QObject::connect(ui->ssb, &QToolButton::toggled, this, &AMDemodGUI::on_ssb_toggled); QObject::connect(ui->bandpassEnable, &ButtonSwitch::toggled, this, &AMDemodGUI::on_bandpassEnable_toggled); QObject::connect(ui->rfBW, &QSlider::valueChanged, this, &AMDemodGUI::on_rfBW_valueChanged); + QObject::connect(ui->afBW, &QSlider::valueChanged, this, &AMDemodGUI::on_afBW_valueChanged); QObject::connect(ui->volume, &QSlider::valueChanged, this, &AMDemodGUI::on_volume_valueChanged); QObject::connect(ui->squelch, &QSlider::valueChanged, this, &AMDemodGUI::on_squelch_valueChanged); QObject::connect(ui->audioMute, &QToolButton::toggled, this, &AMDemodGUI::on_audioMute_toggled); diff --git a/plugins/channelrx/demodam/amdemodgui.h b/plugins/channelrx/demodam/amdemodgui.h index 50726e3bf..9c9dec9b4 100644 --- a/plugins/channelrx/demodam/amdemodgui.h +++ b/plugins/channelrx/demodam/amdemodgui.h @@ -87,6 +87,7 @@ private slots: void on_ssb_toggled(bool checked); void on_bandpassEnable_toggled(bool checked); void on_rfBW_valueChanged(int value); + void on_afBW_valueChanged(int value); void on_volume_valueChanged(int value); void on_squelch_valueChanged(int value); void on_audioMute_toggled(bool checked); diff --git a/plugins/channelrx/demodam/amdemodgui.ui b/plugins/channelrx/demodam/amdemodgui.ui index a7b361034..09b99a467 100644 --- a/plugins/channelrx/demodam/amdemodgui.ui +++ b/plugins/channelrx/demodam/amdemodgui.ui @@ -279,21 +279,6 @@ - - - - Toggle boxcar bandpass filter with 300 Hz low cutoff - - - - :/filter_bandpass.png - :/filter_bandpass.png:/filter_bandpass.png - - - true - - - @@ -332,6 +317,73 @@ + + + + Qt::Vertical + + + + + + + Toggle boxcar bandpass filter with 300 Hz low cutoff + + + + :/filter_bandpass.png + :/filter_bandpass.png:/filter_bandpass.png + + + true + + + + + + + AF BW + + + + + + + Audio bandwidth + + + 10 + + + 400 + + + 1 + + + 50 + + + Qt::Horizontal + + + + + + + + 50 + 0 + + + + 5.0 kHz + + + Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter + + + @@ -434,10 +486,9 @@ - ValueDialZ - QWidget -
gui/valuedialz.h
- 1 + ButtonSwitch + QToolButton +
gui/buttonswitch.h
 RollupContents @@ -445,17 +496,18 @@
gui/rollupcontents.h
1 + + ValueDialZ + QWidget +
gui/valuedialz.h
+ 1 + LevelMeterSignalDB QWidget
gui/levelmeter.h
1 - - ButtonSwitch - QToolButton -
gui/buttonswitch.h
- diff --git a/plugins/channelrx/demodam/amdemodsettings.cpp b/plugins/channelrx/demodam/amdemodsettings.cpp index 8c6de24c9..6ffabac73 100644 --- a/plugins/channelrx/demodam/amdemodsettings.cpp +++ b/plugins/channelrx/demodam/amdemodsettings.cpp @@ -38,6 +38,7 @@ void AMDemodSettings::resetToDefaults() m_volume = 2.0; m_audioMute = false; m_bandpassEnable = false; + m_afBandwidth = 5000; m_rgbColor = QColor(255, 255, 0).rgb(); m_title = "AM Demodulator"; m_audioDeviceName = AudioDeviceManager::m_defaultDeviceName; @@ -69,6 +70,7 @@ QByteArray AMDemodSettings::serialize() const s.writeU32(7, m_rgbColor); s.writeBool(8, m_bandpassEnable); s.writeString(9, m_title); + s.writeReal(10, m_afBandwidth); s.writeString(11, m_audioDeviceName); s.writeBool(12, m_pll); s.writeS32(13, (int) m_syncAMOperation); @@ -85,6 +87,7 @@ QByteArray AMDemodSettings::serialize() const s.writeS32(20, m_workspaceIndex); s.writeBlob(21, m_geometryBytes); s.writeBool(22, m_hidden); + s.writeBool(23, m_audioMute); return s.final(); } @@ -124,6 +127,7 @@ bool AMDemodSettings::deserialize(const QByteArray& data) d.readU32(7, &m_rgbColor); d.readBool(8, &m_bandpassEnable, false); d.readString(9, &m_title, "AM Demodulator"); + d.readReal(10, &m_afBandwidth, 5000); d.readString(11, &m_audioDeviceName, AudioDeviceManager::m_defaultDeviceName); d.readBool(12, &m_pll, false); d.readS32(13, &tmp, 0); @@ -152,6 +156,7 @@ bool AMDemodSettings::deserialize(const QByteArray& data) d.readS32(20, &m_workspaceIndex, 0); d.readBlob(21, &m_geometryBytes); d.readBool(22, &m_hidden, false); + d.readBool(23, &m_audioMute); return true; } diff --git a/plugins/channelrx/demodam/amdemodsettings.h b/plugins/channelrx/demodam/amdemodsettings.h index b925ac596..e5d59ef28 100644 --- a/plugins/channelrx/demodam/amdemodsettings.h +++ b/plugins/channelrx/demodam/amdemodsettings.h @@ -37,6 +37,7 @@ struct AMDemodSettings Real m_volume; bool m_audioMute; bool m_bandpassEnable; + Real m_afBandwidth; //!< High frequency for bandpass quint32 m_rgbColor; QString m_title; Serializable *m_channelMarker; diff --git a/plugins/channelrx/demodam/amdemodsink.cpp b/plugins/channelrx/demodam/amdemodsink.cpp index 5a721a3c4..627c4c6a8 100644 --- a/plugins/channelrx/demodam/amdemodsink.cpp +++ b/plugins/channelrx/demodam/amdemodsink.cpp @@ -273,19 +273,21 @@ void AMDemodSink::applySettings(const AMDemodSettings& settings, bool force) << " m_squelch: " << settings.m_squelch << " m_audioMute: " << settings.m_audioMute << " m_bandpassEnable: " << settings.m_bandpassEnable + << " m_afBandwidth: " << settings.m_afBandwidth << " m_audioDeviceName: " << settings.m_audioDeviceName << " m_pll: " << settings.m_pll << " m_syncAMOperation: " << (int) settings.m_syncAMOperation << " force: " << force; if((m_settings.m_rfBandwidth != settings.m_rfBandwidth) || - (m_settings.m_bandpassEnable != settings.m_bandpassEnable) || force) + (m_settings.m_bandpassEnable != settings.m_bandpassEnable) || + (m_settings.m_afBandwidth != settings.m_afBandwidth) || force) { m_interpolator.create(16, m_channelSampleRate, settings.m_rfBandwidth / 2.2f); m_interpolatorDistanceRemain = 0; m_interpolatorDistance = (Real) m_channelSampleRate / (Real) m_audioSampleRate; - m_bandpass.create(301, m_audioSampleRate, 300.0, settings.m_rfBandwidth / 2.0f); - m_lowpass.create(301, m_audioSampleRate, settings.m_rfBandwidth / 2.0f); + m_bandpass.create(301, m_audioSampleRate, 300.0, settings.m_afBandwidth / 2.0f); + m_lowpass.create(301, m_audioSampleRate, settings.m_afBandwidth / 2.0f); DSBFilter->create_dsb_filter((2.0f * settings.m_rfBandwidth) / (float) m_audioSampleRate); } @@ -326,8 +328,8 @@ void AMDemodSink::applyAudioSampleRate(int sampleRate) m_interpolator.create(16, m_channelSampleRate, m_settings.m_rfBandwidth / 2.2f); m_interpolatorDistanceRemain = 0; m_interpolatorDistance = (Real) m_channelSampleRate / (Real) sampleRate; - m_bandpass.create(301, sampleRate, 300.0, m_settings.m_rfBandwidth / 2.0f); - m_lowpass.create(301, sampleRate, m_settings.m_rfBandwidth / 2.0f); + m_bandpass.create(301, sampleRate, 300.0, m_settings.m_afBandwidth / 2.0f); + m_lowpass.create(301, sampleRate, m_settings.m_afBandwidth / 2.0f); m_audioFifo.setSize(sampleRate); m_squelchDelayLine.resize(sampleRate/5); DSBFilter->create_dsb_filter((2.0f * m_settings.m_rfBandwidth) / (float) sampleRate); diff --git a/plugins/channelrx/demodam/readme.md b/plugins/channelrx/demodam/readme.md index 8483bd4c3..344af8bb1 100644 --- a/plugins/channelrx/demodam/readme.md +++ b/plugins/channelrx/demodam/readme.md @@ -55,3 +55,10 @@ This is the volume of the audio signal from 0.0 (mute) to 10.0 (maximum). It can

10: Squelch threshold

This is the squelch threshold in dB. The average total power received in the signal bandwidth before demodulation is compared to this value and the squelch input is open above this value. It can be varied continuously in 0.1 dB steps from 0.0 to -100.0 dB using the dial button. + +

11: Audio bandwidth

+ +Specifies cutoff frequency of low pass (or band pass if boxcar (7) enabled) filter applied to audio. +In many use cases, this can be the same as the RF bandwidth (8). However, where offset carrier is used +(a.k.a CLIMAX as used by some ATC ground stations), this can reduce noise, when the RF bandwidth is set around ~20kHz +to cope with the offset, but the audio is only ~5-6kHz wide. diff --git a/swagger/sdrangel/api/swagger/include/AMDemod.yaml b/swagger/sdrangel/api/swagger/include/AMDemod.yaml index 53db65e2d..699175466 100644 --- a/swagger/sdrangel/api/swagger/include/AMDemod.yaml +++ b/swagger/sdrangel/api/swagger/include/AMDemod.yaml @@ -9,6 +9,10 @@ AMDemodSettings: description: channel RF bandwidth in Hz (floors to next 100 Hz) type: number format: float + afBandwidth: + description: AF bandwidth in Hz + type: number + format: float squelch: description: power squelch threshold in decibels type: number diff --git a/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.cpp b/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.cpp index c509406ae..a79c75089 100644 --- a/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.cpp +++ b/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.cpp @@ -1,6 +1,6 @@ /** * SDRangel - * This is the web REST/JSON API of SDRangel SDR software. SDRangel is an Open Source Qt5/OpenGL 3.0+ (4.3+ in Windows) GUI and server Software Defined Radio and signal analyzer in software. It supports Airspy, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay RSP1 and FunCube --- Limitations and specifcities: * In SDRangel GUI the first Rx device set cannot be deleted. Conversely the server starts with no device sets and its number of device sets can be reduced to zero by as many calls as necessary to /sdrangel/deviceset with DELETE method. * Preset import and export from/to file is a server only feature. * Device set focus is a GUI only feature. * The following channels are not implemented (status 501 is returned): ATV and DATV demodulators, Channel Analyzer NG, LoRa demodulator * The device settings and report structures contains only the sub-structure corresponding to the device type. The DeviceSettings and DeviceReport structures documented here shows all of them but only one will be or should be present at a time * The channel settings and report structures contains only the sub-structure corresponding to the channel type. The ChannelSettings and ChannelReport structures documented here shows all of them but only one will be or should be present at a time --- + * This is the web REST/JSON API of SDRangel SDR software. SDRangel is an Open Source Qt5/OpenGL 3.0+ (4.3+ in Windows) GUI and server Software Defined Radio and signal analyzer in software. It supports Airspy, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay RSP1 and FunCube --- Limitations and specifcities: * In SDRangel GUI the first Rx device set cannot be deleted. Conversely the server starts with no device sets and its number of device sets can be reduced to zero by as many calls as necessary to /sdrangel/deviceset with DELETE method. * Preset import and export from/to file is a server only feature. * Device set focus is a GUI only feature. * The following channels are not implemented (status 501 is returned): ATV and DATV demodulators, Channel Analyzer NG, LoRa demodulator * The device settings and report structures contains only the sub-structure corresponding to the device type. The DeviceSettings and DeviceReport structures documented here shows all of them but only one will be or should be present at a time * The channel settings and report structures contains only the sub-structure corresponding to the channel type. The ChannelSettings and ChannelReport structures documented here shows all of them but only one will be or should be present at a time --- * * OpenAPI spec version: 7.0.0 * Contact: f4exb06@gmail.com @@ -32,6 +32,8 @@ SWGAMDemodSettings::SWGAMDemodSettings() { m_input_frequency_offset_isSet = false; rf_bandwidth = 0.0f; m_rf_bandwidth_isSet = false; + af_bandwidth = 0.0f; + m_af_bandwidth_isSet = false; squelch = 0.0f; m_squelch_isSet = false; volume = 0.0f; @@ -78,6 +80,8 @@ SWGAMDemodSettings::init() { m_input_frequency_offset_isSet = false; rf_bandwidth = 0.0f; m_rf_bandwidth_isSet = false; + af_bandwidth = 0.0f; + m_af_bandwidth_isSet = false; squelch = 0.0f; m_squelch_isSet = false; volume = 0.0f; @@ -123,26 +127,27 @@ SWGAMDemodSettings::cleanup() { - if(title != nullptr) { + + if(title != nullptr) { delete title; } - if(audio_device_name != nullptr) { + if(audio_device_name != nullptr) { delete audio_device_name; } - if(reverse_api_address != nullptr) { + if(reverse_api_address != nullptr) { delete reverse_api_address; } - if(channel_marker != nullptr) { + if(channel_marker != nullptr) { delete channel_marker; } - if(rollup_state != nullptr) { + if(rollup_state != nullptr) { delete rollup_state; } } @@ -159,43 +164,45 @@ SWGAMDemodSettings::fromJson(QString &json) { void SWGAMDemodSettings::fromJsonObject(QJsonObject &pJson) { ::SWGSDRangel::setValue(&input_frequency_offset, pJson["inputFrequencyOffset"], "qint64", ""); - + ::SWGSDRangel::setValue(&rf_bandwidth, pJson["rfBandwidth"], "float", ""); - + + ::SWGSDRangel::setValue(&af_bandwidth, pJson["afBandwidth"], "float", ""); + ::SWGSDRangel::setValue(&squelch, pJson["squelch"], "float", ""); - + ::SWGSDRangel::setValue(&volume, pJson["volume"], "float", ""); - + ::SWGSDRangel::setValue(&audio_mute, pJson["audioMute"], "qint32", ""); - + ::SWGSDRangel::setValue(&bandpass_enable, pJson["bandpassEnable"], "qint32", ""); - + ::SWGSDRangel::setValue(&rgb_color, pJson["rgbColor"], "qint32", ""); - + ::SWGSDRangel::setValue(&title, pJson["title"], "QString", "QString"); - + ::SWGSDRangel::setValue(&audio_device_name, pJson["audioDeviceName"], "QString", "QString"); - + ::SWGSDRangel::setValue(&pll, pJson["pll"], "qint32", ""); - + ::SWGSDRangel::setValue(&sync_am_operation, pJson["syncAMOperation"], "qint32", ""); - + ::SWGSDRangel::setValue(&stream_index, pJson["streamIndex"], "qint32", ""); - + ::SWGSDRangel::setValue(&use_reverse_api, pJson["useReverseAPI"], "qint32", ""); - + ::SWGSDRangel::setValue(&reverse_api_address, pJson["reverseAPIAddress"], "QString", "QString"); - + ::SWGSDRangel::setValue(&reverse_api_port, pJson["reverseAPIPort"], "qint32", ""); - + ::SWGSDRangel::setValue(&reverse_api_device_index, pJson["reverseAPIDeviceIndex"], "qint32", ""); - + ::SWGSDRangel::setValue(&reverse_api_channel_index, pJson["reverseAPIChannelIndex"], "qint32", ""); - + ::SWGSDRangel::setValue(&channel_marker, pJson["channelMarker"], "SWGChannelMarker", "SWGChannelMarker"); - + ::SWGSDRangel::setValue(&rollup_state, pJson["rollupState"], "SWGRollupState", "SWGRollupState"); - + } QString @@ -218,6 +225,9 @@ SWGAMDemodSettings::asJsonObject() { if(m_rf_bandwidth_isSet){ obj->insert("rfBandwidth", QJsonValue(rf_bandwidth)); } + if(m_af_bandwidth_isSet){ + obj->insert("afBandwidth", QJsonValue(af_bandwidth)); + } if(m_squelch_isSet){ obj->insert("squelch", QJsonValue(squelch)); } @@ -293,6 +303,16 @@ SWGAMDemodSettings::setRfBandwidth(float rf_bandwidth) { this->m_rf_bandwidth_isSet = true; } +float +SWGAMDemodSettings::getAfBandwidth() { + return af_bandwidth; +} +void +SWGAMDemodSettings::setAfBandwidth(float af_bandwidth) { + this->af_bandwidth = af_bandwidth; + this->m_af_bandwidth_isSet = true; +} + float SWGAMDemodSettings::getSquelch() { return squelch; @@ -474,6 +494,9 @@ SWGAMDemodSettings::isSet(){ if(m_rf_bandwidth_isSet){ isObjectUpdated = true; break; } + if(m_af_bandwidth_isSet){ + isObjectUpdated = true; break; + } if(m_squelch_isSet){ isObjectUpdated = true; break; } @@ -529,4 +552,3 @@ SWGAMDemodSettings::isSet(){ return isObjectUpdated; } } - diff --git a/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.h b/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.h index 94b8cf83f..7e46a2149 100644 --- a/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.h +++ b/swagger/sdrangel/code/qt5/client/SWGAMDemodSettings.h @@ -1,6 +1,6 @@ /** * SDRangel - * This is the web REST/JSON API of SDRangel SDR software. SDRangel is an Open Source Qt5/OpenGL 3.0+ (4.3+ in Windows) GUI and server Software Defined Radio and signal analyzer in software. It supports Airspy, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay RSP1 and FunCube --- Limitations and specifcities: * In SDRangel GUI the first Rx device set cannot be deleted. Conversely the server starts with no device sets and its number of device sets can be reduced to zero by as many calls as necessary to /sdrangel/deviceset with DELETE method. * Preset import and export from/to file is a server only feature. * Device set focus is a GUI only feature. * The following channels are not implemented (status 501 is returned): ATV and DATV demodulators, Channel Analyzer NG, LoRa demodulator * The device settings and report structures contains only the sub-structure corresponding to the device type. The DeviceSettings and DeviceReport structures documented here shows all of them but only one will be or should be present at a time * The channel settings and report structures contains only the sub-structure corresponding to the channel type. The ChannelSettings and ChannelReport structures documented here shows all of them but only one will be or should be present at a time --- + * This is the web REST/JSON API of SDRangel SDR software. SDRangel is an Open Source Qt5/OpenGL 3.0+ (4.3+ in Windows) GUI and server Software Defined Radio and signal analyzer in software. It supports Airspy, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay RSP1 and FunCube --- Limitations and specifcities: * In SDRangel GUI the first Rx device set cannot be deleted. Conversely the server starts with no device sets and its number of device sets can be reduced to zero by as many calls as necessary to /sdrangel/deviceset with DELETE method. * Preset import and export from/to file is a server only feature. * Device set focus is a GUI only feature. * The following channels are not implemented (status 501 is returned): ATV and DATV demodulators, Channel Analyzer NG, LoRa demodulator * The device settings and report structures contains only the sub-structure corresponding to the device type. The DeviceSettings and DeviceReport structures documented here shows all of them but only one will be or should be present at a time * The channel settings and report structures contains only the sub-structure corresponding to the channel type. The ChannelSettings and ChannelReport structures documented here shows all of them but only one will be or should be present at a time --- * * OpenAPI spec version: 7.0.0 * Contact: f4exb06@gmail.com @@ -50,6 +50,9 @@ public: float getRfBandwidth(); void setRfBandwidth(float rf_bandwidth); + float getAfBandwidth(); + void setAfBandwidth(float af_bandwidth); + float getSquelch(); void setSquelch(float squelch); @@ -111,6 +114,9 @@ private: float rf_bandwidth; bool m_rf_bandwidth_isSet; + float af_bandwidth; + bool m_af_bandwidth_isSet; + float squelch; bool m_squelch_isSet; @@ -166,4 +172,4 @@ private: } -#endif /* SWGAMDemodSettings_H_ */ +#endif /* SWGAMDemodSettings_H_ */ \ No newline at end of file