PlutoSDR MIMO: base implementation

sdrbase/resources/webapi/doc/swagger/include/ChannelSettings.yaml

@@ -43,6 +43,8 @@ ChannelSettings:
       $ref: "/doc/swagger/include/DATVMod.yaml#/DATVModSettings"
     DATVDemodSettings:
       $ref: "/doc/swagger/include/DATVDemod.yaml#/DATVDemodSettings"
+    DABDemodSettings:
+      $ref: "/doc/swagger/include/DABDemod.yaml#/DABDemodSettings"
     DSDDemodSettings:
       $ref: "/doc/swagger/include/DSDDemod.yaml#/DSDDemodSettings"
     FileSinkSettings:

sdrbase/resources/webapi/doc/swagger/include/DABDemod.yaml

@@ -0,0 +1,36 @@
+DABDemodSettings:
+  description: DABDemod
+  properties:
+    inputFrequencyOffset:
+      type: integer
+      format: int64
+    rfBandwidth:
+      type: number
+      format: float
+    program:
+      type: string
+    volume:
+      type: number
+      format: float
+    audioMute:
+      type: integer
+    audioDeviceName:
+      type: string
+    rgbColor:
+      type: integer
+    title:
+      type: string
+    streamIndex:
+      description: MIMO channel. Not relevant when connected to SI (single Rx).
+      type: integer
+    useReverseAPI:
+      description: Synchronize with reverse API (1 for yes, 0 for no)
+      type: integer
+    reverseAPIAddress:
+      type: string
+    reverseAPIPort:
+      type: integer
+    reverseAPIDeviceIndex:
+      type: integer
+    reverseAPIChannelIndex:
+      type: integer

sdrbase/resources/webapi/doc/swagger/include/DeviceReports.yaml

@@ -41,6 +41,8 @@ DeviceReport:
       $ref: "/doc/swagger/include/PlutoSdr.yaml#/PlutoSdrInputReport"
     plutoSdrOutputReport:
       $ref: "/doc/swagger/include/PlutoSdr.yaml#/PlutoSdrOutputReport"
+    plutoSdrMIMOReport:
+      $ref: "/doc/swagger/include/PlutoSdr.yaml#/PlutoSdrMIMOReport"
     rtlSdrReport:
       $ref: "/doc/swagger/include/RtlSdr.yaml#/RtlSdrReport"
     remoteOutputReport:
@@ -49,6 +51,8 @@ DeviceReport:
       $ref: "/doc/swagger/include/RemoteInput.yaml#/RemoteInputReport"
     sdrPlayReport:
       $ref: "/doc/swagger/include/SDRPlay.yaml#/SDRPlayReport"
+    sdrPlayV3Report:
+      $ref: "/doc/swagger/include/SDRPlayV3.yaml#/SDRPlayV3Report"
     sigMFFileInputReport:
       $ref: "/doc/swagger/include/SigMFFileInput.yaml#/SigMFFileInputReport"
     soapySDRInputReport:

sdrbase/resources/webapi/doc/swagger/include/DeviceSettings.yaml

@@ -62,6 +62,8 @@ DeviceSettings:
       $ref: "/doc/swagger/include/PlutoSdr.yaml#/PlutoSdrInputSettings"
     plutoSdrOutputSettings:
       $ref: "/doc/swagger/include/PlutoSdr.yaml#/PlutoSdrOutputSettings"
+    plutoSdrMIMOSettings:
+      $ref: "/doc/swagger/include/PlutoSdr.yaml#/PlutoSdrMIMOSettings"
     rtlSdrSettings:
       $ref: "/doc/swagger/include/RtlSdr.yaml#/RtlSdrSettings"
     remoteOutputSettings:
@@ -70,6 +72,8 @@ DeviceSettings:
       $ref: "/doc/swagger/include/RemoteInput.yaml#/RemoteInputSettings"
     sdrPlaySettings:
       $ref: "/doc/swagger/include/SDRPlay.yaml#/SDRPlaySettings"
+    sdrPlayV3Settings:
+      $ref: "/doc/swagger/include/SDRPlayV3.yaml#/SDRPlayV3Settings"
     sigMFFileInputSettings:
       $ref: "/doc/swagger/include/SigMFFileInput.yaml#/SigMFFileInputSettings"
     soapySDRInputSettings:

sdrbase/resources/webapi/doc/swagger/include/PlutoSdr.yaml

@@ -113,6 +113,110 @@ PlutoSdrOutputSettings:
     reverseAPIDeviceIndex:
       type: integer
 
+PlutoSdrMIMOSettings:
+  description: PlutoSDR
+  properties:
+    devSampleRate:
+      type: integer
+    LOppmTenths:
+      type: integer
+    rxCenterFrequency:
+      type: integer
+      format: int64
+    dcBlock:
+      type: integer
+    iqCorrection:
+      type: integer
+    hwBBDCBlock:
+      type: integer
+    hwRFDCBlock:
+      type: integer
+    hwIQCorrection:
+      type: integer
+    fcPosRx:
+      description: 0=Infra 1=Supra 2=Center
+      type: integer
+    rxTransverterMode:
+      type: integer
+    rxTransverterDeltaFrequency:
+      type: integer
+      format: int64
+    iqOrder:
+      type: integer
+      description: >
+        IQ samples order
+          * 0 - Q then I (swapped)
+          * 1 - I then Q (straight)
+    lpfBWRx:
+      description: Analog lowpass filter bandwidth (Hz)
+      type: integer
+    lpfRxFIREnable:
+      description: Low pass FIR filter enable (1 if enabled else 0)
+      type: integer
+    lpfRxFIRBW:
+      description: digital lowpass FIR filter bandwidth (Hz)
+      type: integer
+    lpfRxFIRlog2Decim:
+      description: digital lowpass FIR filter log2 of decimation factor (0..2)
+      type: integer
+    lpfRxFIRGain:
+      description: digital lowpass FIR filter gain (dB)
+      type: integer
+    log2Decim:
+      type: integer
+    rx0Gain:
+      description: Hardware gain
+      type: integer
+    rx0GainMode:
+      type: integer
+    rx0AntennaPath:
+      type: integer
+    rx1Gain:
+      description: Hardware gain
+      type: integer
+    rx1GainMode:
+      type: integer
+    rx1AntennaPath:
+      type: integer
+    txCenterFrequency:
+      type: integer
+      format: int64
+    fcPosTx:
+      description: 0=Infra 1=Supra 2=Center
+      type: integer
+    txTransverterMode:
+      type: integer
+    txTransverterDeltaFrequency:
+      type: integer
+      format: int64
+    lpfBWTx:
+      description: Analog lowpass filter bandwidth (Hz)
+      type: integer
+    lpfTxFIREnable:
+      description: Low pass FIR filter enable (1 if enabled else 0)
+      type: integer
+    lpfTxFIRBW:
+      description: digital lowpass FIR filter bandwidth (Hz)
+      type: integer
+    lpfTxFIRlog2Interp:
+      description: digital lowpass FIR filter log2 of interpolation factor (0..2)
+      type: integer
+    lpfTxFIRGain:
+      description: digital lowpass FIR filter gain (dB)
+      type: integer
+    log2Interp:
+      type: integer
+    tx0Att:
+      description: Hardware attenuator gain in decibel fourths (negative)
+      type: integer
+    tx0AntennaPath:
+      type: integer
+    tx1Att:
+      description: Hardware attenuator gain in decibel fourths (negative)
+      type: integer
+    tx1AntennaPath:
+      type: integer
+
 PlutoSdrInputReport:
   description: PlutoSDR
   properties:
@@ -136,3 +240,23 @@ PlutoSdrOutputReport:
     temperature:
       type: number
       format: float
+
+PlutoSdrMIMOReport:
+  description: PlutoSDR
+  properties:
+    adcRate:
+      type: integer
+    dacRate:
+      type: integer
+    rx0GainDB:
+      type: integer
+    rx1GainDB:
+      type: integer
+    rssiRx0:
+      type: string
+    rssiRx1:
+      type: string
+    rssiTx0:
+      type: string
+    rssiTx1:
+      type: string

sdrbase/resources/webapi/doc/swagger/include/SDRPlayV3.yaml

@@ -0,0 +1,61 @@
+SDRPlayV3Settings:
+  description: SDRplayV3
+  properties:
+    centerFrequency:
+      type: integer
+      format: int64
+    LOppmTenths:
+      type: integer
+    ifFrequencyIndex:
+      type: integer
+    bandwidthIndex:
+      type: integer
+    devSampleRate:
+      type: integer
+    log2Decim:
+      type: integer
+    fcPos:
+      type: integer
+    dcBlock:
+      type: integer
+    iqCorrection:
+      type: integer
+    lnaIndex:
+      type: integer
+    ifAGC:
+      type: integer
+    ifGain:
+      type: integer
+    amNotch:
+      type: integer
+    fmNotch:
+      type: integer
+    dabNotch:
+      type: integer
+    extRef:
+      type: integer
+    tuner:
+      type: integer
+    antenna:
+      type: integer
+    useReverseAPI:
+      description: Synchronize with reverse API (1 for yes, 0 for no)
+      type: integer
+    reverseAPIAddress:
+      type: string
+    reverseAPIPort:
+      type: integer
+    reverseAPIDeviceIndex:
+      type: integer
+
+SDRPlayV3Report:
+  description: SDRplayV3
+  properties:
+    bandwidths:
+      type: array
+      items:
+        $ref: "/doc/swagger/include/Structs.yaml#/Bandwidth"
+    intermediateFrequencies:
+      type: array
+      items:
+        $ref: "/doc/swagger/include/Structs.yaml#/Frequency"