From 77c583385a9ae491e8104ad8cb0bdb264a600550 Mon Sep 17 00:00:00 2001 From: f4exb Date: Tue, 23 Jun 2020 05:02:00 +0200 Subject: [PATCH] IQ swap: updated plugins documentation --- plugins/samplesource/airspyhf/readme.md | 28 +------------------- plugins/samplesource/bladerf2input/readme.md | 28 +------------------- plugins/samplesource/fcdpro/readme.md | 28 +------------------- plugins/samplesource/fcdproplus/readme.md | 28 +------------------- plugins/samplesource/limesdrinput/readme.md | 28 +------------------- plugins/samplesource/perseus/readme.md | 28 +------------------- plugins/samplesource/plutosdrinput/readme.md | 28 +------------------- plugins/samplesource/rtlsdr/readme.md | 28 +------------------- plugins/samplesource/soapysdrinput/readme.md | 28 +------------------- 9 files changed, 9 insertions(+), 243 deletions(-) diff --git a/plugins/samplesource/airspyhf/readme.md b/plugins/samplesource/airspyhf/readme.md index ef48c2f28..bcf7dbb4c 100644 --- a/plugins/samplesource/airspyhf/readme.md +++ b/plugins/samplesource/airspyhf/readme.md @@ -80,33 +80,7 @@ The I/Q stream from the AirspyHF to host is downsampled by a power of two before

9: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![AirspyHF input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

9a.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example with the DX Patrol that has a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the RTLSDR of the DX Patrol will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

9a.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

9a.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

10: AGC mode

diff --git a/plugins/samplesource/bladerf2input/readme.md b/plugins/samplesource/bladerf2input/readme.md index d476b5e86..2318e6948 100644 --- a/plugins/samplesource/bladerf2input/readme.md +++ b/plugins/samplesource/bladerf2input/readme.md @@ -65,33 +65,7 @@ This is the Rx filter bandwidth in kHz. Minimum and maximum values are adjusted

5: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![Input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

5.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the PlutoSDR will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

5.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

5.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

6A: Device sample rate / Baseband sample rate input toggle

diff --git a/plugins/samplesource/fcdpro/readme.md b/plugins/samplesource/fcdpro/readme.md index d8f4d6de6..85e34071f 100644 --- a/plugins/samplesource/fcdpro/readme.md +++ b/plugins/samplesource/fcdpro/readme.md @@ -61,33 +61,7 @@ The I/Q stream from the FCD Pro ADC is downsampled by a power of two before bein

6: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![FCD Pro source input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

6.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example with the DX Patrol that has a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the FCD Pro of the DX Patrol will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

6.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

6.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

7: Set default values

diff --git a/plugins/samplesource/fcdproplus/readme.md b/plugins/samplesource/fcdproplus/readme.md index 5852b3e40..8df200837 100644 --- a/plugins/samplesource/fcdproplus/readme.md +++ b/plugins/samplesource/fcdproplus/readme.md @@ -61,33 +61,7 @@ The I/Q stream from the FCD Pro+ ADC is downsampled by a power of two before bei

6: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![FCD Pro+ source input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

6.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example with the DX Patrol that has a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the FCD Pro+ of the DX Patrol will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

6.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

6.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

7: LNA toggle

diff --git a/plugins/samplesource/limesdrinput/readme.md b/plugins/samplesource/limesdrinput/readme.md index e1ac00ed6..338616195 100644 --- a/plugins/samplesource/limesdrinput/readme.md +++ b/plugins/samplesource/limesdrinput/readme.md @@ -146,33 +146,7 @@ Use the wheels to adjust the bandwidth of the hardware TSP FIR filter. Pressing

7.4: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![LimeSDR source input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -
7.4.1: Translating frequency
- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the PlutoSDR will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -
7.4.2: Translating frequency enable/disable
- -Use this toggle button to activate or deactivate the frequency translation - -
7.4.3: Confirmation buttons
- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

8: Gain settings

diff --git a/plugins/samplesource/perseus/readme.md b/plugins/samplesource/perseus/readme.md index 4afd13b08..29c21e64c 100644 --- a/plugins/samplesource/perseus/readme.md +++ b/plugins/samplesource/perseus/readme.md @@ -72,33 +72,7 @@ The I/Q stream from the Perseus to host is downsampled by a power of two before

7: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![Perseus source input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

7a.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example with the DX Patrol that has a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the RTLSDR of the DX Patrol will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

7a.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

7a.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

8: Attenuators control

diff --git a/plugins/samplesource/plutosdrinput/readme.md b/plugins/samplesource/plutosdrinput/readme.md index 5b6172508..00a60aec9 100644 --- a/plugins/samplesource/plutosdrinput/readme.md +++ b/plugins/samplesource/plutosdrinput/readme.md @@ -68,33 +68,7 @@ Use this slider to adjust LO correction in ppm. It can be varied from -20.0 to 2

3: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![PlutoSDR source input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

3.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the PlutoSDR will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

3.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

3.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

4: Auto correction options

diff --git a/plugins/samplesource/rtlsdr/readme.md b/plugins/samplesource/rtlsdr/readme.md index d6592ca1b..755015cef 100644 --- a/plugins/samplesource/rtlsdr/readme.md +++ b/plugins/samplesource/rtlsdr/readme.md @@ -65,33 +65,7 @@ With SR as the sample rate before decimation Fc is calculated as:

5: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![RTLSDR source input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

5.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. Use the wheels to adjust the sample rate. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position. Wheels are moved with the mousewheel while pointing at the wheel or by selecting the wheel with the left mouse click and using the keyboard arrows. Pressing shift simultaneously moves digit by 5 and pressing control moves it by 2. - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example with the DX Patrol that has a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the RTLSDR of the DX Patrol will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

5.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

5.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

6: Toggle low/high sample rate range

diff --git a/plugins/samplesource/soapysdrinput/readme.md b/plugins/samplesource/soapysdrinput/readme.md index c14a3329a..a02cd7781 100644 --- a/plugins/samplesource/soapysdrinput/readme.md +++ b/plugins/samplesource/soapysdrinput/readme.md @@ -128,33 +128,7 @@ The I/Q stream from the SoapySDR I/Q stream is downsampled by a power of two bef

5: Transverter mode open dialog

-This button opens a dialog to set the transverter mode frequency translation options: - -![Input stream transverter dialog](../../../doc/img/RTLSDR_plugin_xvrt.png) - -Note that if you mouse over the button a tooltip appears that displays the translating frequency and if translation is enabled or disabled. When the frequency translation is enabled the button is lit. - -

5.1: Translating frequency

- -You can set the translating frequency in Hz with this dial. The manipulation of the dial is described in (1.1: Frequency). - -The frequency set in the device is the frequency on the main dial (1) minus this frequency. Thus it is positive for down converters and negative for up converters. - -For example a mixer at 120 MHz for HF operation you would set the value to -120,000,000 Hz so that if the main dial frequency is set at 7,130 kHz the PlutoSDR will be set to 127.130 MHz. - -If you use a down converter to receive the 6 cm band narrowband center frequency of 5670 MHz at 432 MHz you would set the translating frequency to 5760 - 432 = 5328 MHz thus dial +5,328,000,000 Hz. - -For bands even higher in the frequency spectrum the GHz digits are not really significant so you can have them set at 1 GHz. Thus to receive the 10368 MHz frequency at 432 MHz you would set the translating frequency to 1368 - 432 = 936 MHz. Note that in this case the frequency of the LO used in the mixer of the transverter is set at 9936 MHz. - -The Hz precision allows a fine tuning of the transverter LO offset - -

5.2: Translating frequency enable/disable

- -Use this toggle button to activate or deactivate the frequency translation - -

5.3: Confirmation buttons

- -Use these buttons to confirm ("OK") or dismiss ("Cancel") your changes. +This button opens a dialog to set the transverter mode frequency translation options. The details about this dialog can be found [here](../../../sdrgui/gui/transverterdialog.md)

6: Software LO ppm correction