diff --git a/doc/img/ATVDemod_plugin.png b/doc/img/ATVDemod_plugin.png
index cf0155f9b..0870d0280 100644
Binary files a/doc/img/ATVDemod_plugin.png and b/doc/img/ATVDemod_plugin.png differ
diff --git a/doc/img/ATVDemod_plugin.xcf b/doc/img/ATVDemod_plugin.xcf
index 9731a78f4..229c6a6fb 100644
Binary files a/doc/img/ATVDemod_plugin.xcf and b/doc/img/ATVDemod_plugin.xcf differ
diff --git a/doc/img/ATVDemod_pluginA.png b/doc/img/ATVDemod_pluginA.png
index 1c96904c7..1204f0eeb 100644
Binary files a/doc/img/ATVDemod_pluginA.png and b/doc/img/ATVDemod_pluginA.png differ
diff --git a/doc/img/ATVDemod_pluginA.xcf b/doc/img/ATVDemod_pluginA.xcf
index 45bb170aa..4e87dfbe7 100644
Binary files a/doc/img/ATVDemod_pluginA.xcf and b/doc/img/ATVDemod_pluginA.xcf differ
diff --git a/plugins/channelrx/demodatv/readme.md b/plugins/channelrx/demodatv/readme.md
index 48af6213c..50f2342b2 100644
--- a/plugins/channelrx/demodatv/readme.md
+++ b/plugins/channelrx/demodatv/readme.md
@@ -103,17 +103,25 @@ Using this button you can adjust the nominal FM deviation as a percentage of the
 
 ☞ The value is accurate only with the atan2 differential demodulator i.e. FM3. With FM1 and FM2 you will have to adjust it for best image results. You can use the scope as an aid to try to fit the video signal in the 0/1 range.
 
-<h3>11: FFT asymmetrical filter toggle</h3>
+<h3>11: AM signal range correction factor</h3>
+
+This is a factor in % applied to the detected AM signal range. Because of possible overshoots the detected range may be artificially reduced from the original causing possible errors on the different detection lavels on the video signal. This control lets you correct this. Watch the video signal in the scope tab for fine tuning. It affects only AM signals.
+
+<h3>12: AM signal range offset correction factor</h3>
+
+This is a factor in % applied to the signal resulting from the previous correction and that shifts its relative position. Using this control you can position the video signal correctly so that the black level is around 0.3V. Again watch the video signal in the scope tab for fine tuning. It affects only AM signals.
+
+<h3>13: FFT asymmetrical filter toggle</h3>
 
 Use this button to enable/disable the FFT asymmetrical filter. Use this filter when you want to optimize the reception of vestigial sideband AM signals.
 
-<h3>12: FFT asymmetrical filter opposite band cutoff frequency</h3>
+<h3>14: FFT asymmetrical filter opposite band cutoff frequency</h3>
 
 For all modulations except LSB this is the lower side band.
 
 This slider lets you adjust the opposite band cutoff frequency of the FFT asymmetrical filter. The value in kHz appears on the left of the slider.
 
-<h3>13: FFT asymmetrical filter in band cutoff frequency</h3>
+<h3>15: FFT asymmetrical filter in band cutoff frequency</h3>
 
 For all modulations except LSB this is the upper side band.