VE7UWU
/
sdrangel
mirror of https://github.com/f4exb/sdrangel.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Remove trailing spaces

This commit is contained in:
Jon Beniston 2020-09-18 16:42:32 +01:00
parent 762a421ea0
commit d954eeb75a
1 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
plugins/channeltx/modpacket/readme.md
View File

@ -30,11 +30,11 @@ This specifies the bandwidth of a LPF that is applied to the output signal to li
<h3>6: Frequency deviation</h3>
Adjusts the frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are 2.5 kHz and 5 kHz.
Adjusts the frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are 2.5 kHz and 5 kHz.
<h3>7: Gain</h3>
Adjusts the gain in dB from -60 to 0dB. The gain should be set to ensure the level meter remains below 100%.
Adjusts the gain in dB from -60 to 0dB. The gain should be set to ensure the level meter remains below 100%.
<h3>8: Level meter in %</h3>
@ -48,11 +48,11 @@ Enter your amateur radio callsign and optionally a sub-station ID (SSID). E.g. M
<h3>10: Preemphaisis Filter</h3>
Check this button to enable a FM preemphasis filter, which amplifiers higher frequencies. Right click to open the dialog to adjust settings for the filter.
Check this button to enable a FM preemphasis filter, which amplifiers higher frequencies. Right click to open the dialog to adjust settings for the filter.
<h3>11: Repeat</h3>
Check this button to repeated transmit a packet. Right click to open the dialog to adjust the delay between retransmission and number of times the packet should be repeated.
Check this button to repeated transmit a packet. Right click to open the dialog to adjust the delay between retransmission and number of times the packet should be repeated.
<h3>12: Insertion position</h3>
@ -60,7 +60,7 @@ Inserts position as APRS formatted latitude and longitude in to the current curs
<h3>13: To</h3>
Enter the destination for the packet. To send the packet to the APRS network, use APRS or APZ.
Enter the destination for the packet. To send the packet to the APRS network, use APRS or APZ.
<h3>14: Via</h3>
@ -76,7 +76,7 @@ Transmits a packet based on the current values in callsign, to, via and data.
<h2>API</h2>
Full details of the API can be found in the Swagger documentation. Here is a quick example of how to transmit a packet from the command line:
Full details of the API can be found in the Swagger documentation. Here is a quick example of how to transmit a packet from the command line:
curl -X POST "http://127.0.0.1:8091/sdrangel/deviceset/1/channel/0/actions" -d '{"channelType": "PacketMod", "direction": 1, "PacketModActions": { "tx": { "callsign": "MYCALL", "to": "APRS", "via": "WIDE2-2", "data": ">Using SDRangel API to transmit" }}}'