Multiple audio: updated plugins documentation

plugins/channelrx/demodam/readme.md

@@ -20,7 +20,7 @@ Average total power in dB relative to a +/- 1.0 amplitude signal received in the
 
 Left click on this button to toggle audio mute for this channel. The button will light up in green if the squelch is open. This helps identifying which channels are active in a multi-channel configuration.
 
-If you right click on it it will open a dialog to select the audio output device.
+If you right click on it it will open a dialog to select the audio output device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
 <h3>5: Level meter in dB</h3>
 

plugins/channelrx/demoddsd/readme.md

@@ -86,23 +86,13 @@ Number of milliseconds following squelch gate opening after which the signal is
 
 Use this switch to toggle high-pass filter on the audio
 
-<h4>A.9: Audio mute and squelch indicator</h4>
+<h4>A.9: Audio mute, squelch indicator and select audio output device</h4>
 
-Audio mute toggle button. This button lights in green when the squelch opens.
+Left click to mute/unmute audio. This button lights in green when the squelch opens.
 
-<h3>A.10: UDP output</h3>
+If you right click on it it will open a dialog to select the audio output device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
-Copies audio output to UDP. Output is stereo S16LE samples. Depending on which slots are active the output is the following:
+<h3>A.11: Format specific status display</h3>
-
-  - Slot 1: slot 1 on left channel
-  - Slot 2: slot 2 on right channel
-  - Slot 1+2: slot 1 on left channel 
-
-It cannot mix both channels when slot1+2 are active.
-
-UDP address and send port are specified in the basic channel settings. See: [here](https://github.com/f4exb/sdrangel/blob/master/sdrgui/readme.md#6-channels)
-
-<h3>a.11: Format specific status display</h3>
 
 When the display is active the background turns from the surrounding gray color to dark green. It shows informatory or status messages that are particular to each format.
 

plugins/channelrx/demodnfm/nfmdemodgui.ui

@@ -574,7 +574,7 @@
       <item>
        <widget class="QToolButton" name="audioMute">
         <property name="toolTip">
-         <string>Mute/Unmute audio</string>
+         <string>Left: Mute/Unmute audio Right: Select audio output device</string>
         </property>
         <property name="text">
          <string>...</string>

plugins/channelrx/demodnfm/readme.md

@@ -62,4 +62,4 @@ This is the value of the tone squelch received when the CTCSS is activated. It d
 
 Left click on this button to toggle audio mute for this channel. The button will light up in green if the squelch is open. This helps identifying which channels are active in a multi-channel configuration.
 
-If you right click on it it will open a dialog to select the audio output device.
+If you right click on it it will open a dialog to select the audio output device. See [audio management documentation](../../../sdrgui/audio.md) for details.

plugins/channelrx/demodssb/readme.md

@@ -148,7 +148,7 @@ When the power threshold is close to the noise floor a few milliseconds help in
 
 Left click on this button to toggle audio mute for this channel.
 
-If you right click on it a dialog will open to select the audio output device.
+If you right click on it a dialog will open to select the audio output device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
 <h3>14: Spectrum display</h3>
 

plugins/channeltx/modam/readme.md

@@ -60,7 +60,7 @@ Adjusts the tone frequency from 0.1 to 2.5 kHz in 0.01 kHz steps
 
 Left click to switch to the audio input. You must switch it off to make other inputs available.
 
-Right click to select audio input device.
+Right click to select audio input device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
 <h3>10: CW (Morse) text</h3>
 

plugins/channeltx/modnfm/readme.md

@@ -64,7 +64,7 @@ Adjusts the tone frequency from 0.1 to 2.5 kHz in 0.01 kHz steps
 
 Left click to switch to the audio input. You must switch it off to make other inputs available.
 
-Right click to select audio input device.
+Right click to select audio input device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
 <h3>11: CTCSS switch</h3>
 

plugins/channeltx/modssb/readme.md

@@ -163,9 +163,11 @@ Switches to the Morse keyer input. You must switch it off to make other inputs a
 
 Adjusts the tone frequency from 0.1 to 2.5 kHz in 0.01 kHz steps
 
-<h4>13.4: Audio input select</h4>
+<h4>13.4: Audio input select and select audio input device</h4>
 
-Switches to the audio input. You must switch it off to make other inputs available.
+Left click to switch to the audio input. You must switch it off to make other inputs available.
+
+Right click to select audio input device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
 <h3>14: CW (Morse) text</h3>
 

plugins/channeltx/modwfm/readme.md

@@ -64,7 +64,7 @@ Adjusts the tone frequency from 0.1 to 2.5 kHz in 0.01 kHz steps
 
 Left click to switch to the audio input. You must switch it off to make other inputs available.
 
-Right click to select audio input device.
+Right click to select audio input device. See [audio management documentation](../../../sdrgui/audio.md) for details.
 
 <h3>11: CW (Morse) text</h3>