VE7UWU/sdrangel
1
0
Fork 0
mirror of https://github.com/f4exb/sdrangel.git synced 2024-11-25 17:28:50 -05:00
Code Issues Projects Releases Wiki Activity

LimeRFE USB support: corrected some spelling errors

Browse Source
This commit is contained in:
f4exb 2020-01-20 17:33:07 +01:00
parent a2054032f2
commit ff44eec40f
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
sdrgui/limerfeusbgui.md
View File

@ -6,7 +6,7 @@ To open the LimeRFE USB dialog open the Preferences sub-menu from the top bar an
The dialog is non-modal so that it can be left open and keep the control on LimeRFE while other functions can be used.
⚠ Disclaimer: please use this interface and the LimeRFE sensibly by making sure you are licenced to operate it on the selected frequencies. If you are a licenced amateur radio you should make sure you operate on the bands allocated in your region as some bands are exclusive to a specific region or country.
⚠ Disclaimer: please use this interface and the LimeRFE sensibly by making sure you are licensed to operate it on the selected frequencies. If you are a licensed amateur radio you should make sure you operate on the bands allocated in your region as some bands are exclusive to a specific region or country.
![LimeRFE USB dialog](../doc/img/LimeRFEUSB_dialog.png)
@ -49,7 +49,7 @@ Depending on the channel group selected in (A.1) use this combo to select the ba
<h4>HAM channels</h4>
- **<30MHz**: HF bands i.e. lowpass up to 30 MHz
- **<30MHz**: HF bands i.e. low-pass up to 30 MHz
- **50-70MHz**: covers the 6m and 4m bands
- **144-146MHz**: covers the 2m band
- **220-225MHz**: covers the 1.25m band (region 2)
@ -70,8 +70,8 @@ Depending on the channel group selected in (A.1) use this combo to select the ba
Select which port to connect the Rx to:
- **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a diplexer internally
- **Tx/Rx 30M (J5)**: HF port only available when wideband channels are selected
- **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a duplexer internally
- **Tx/Rx 30M (J5)**: HF port only available when wide band channels are selected
<h3>A.4 Attenuator</h3>
@ -101,7 +101,7 @@ Use this combo to select the band. This is identical to the Rx side (A.2).
Select which port to connect the Rx to:
- **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a diplexer internally
- **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a duplexer internally
- **Tx (J4)**: Tx connected port only. Can be used to split Rx and Tx to drive a higher power P.A. for example
<h2>C. Power and SWR</h2>