From ff44eec40f5b8c1336b4d2b0b1ecb7eb4bc48fa9 Mon Sep 17 00:00:00 2001 From: f4exb Date: Mon, 20 Jan 2020 17:33:07 +0100 Subject: [PATCH] LimeRFE USB support: corrected some spelling errors --- sdrgui/limerfeusbgui.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sdrgui/limerfeusbgui.md b/sdrgui/limerfeusbgui.md index d3cc448f5..ef6ca793b 100644 --- a/sdrgui/limerfeusbgui.md +++ b/sdrgui/limerfeusbgui.md @@ -6,7 +6,7 @@ To open the LimeRFE USB dialog open the Preferences sub-menu from the top bar an The dialog is non-modal so that it can be left open and keep the control on LimeRFE while other functions can be used. -⚠ Disclaimer: please use this interface and the LimeRFE sensibly by making sure you are licenced to operate it on the selected frequencies. If you are a licenced amateur radio you should make sure you operate on the bands allocated in your region as some bands are exclusive to a specific region or country. +⚠ Disclaimer: please use this interface and the LimeRFE sensibly by making sure you are licensed to operate it on the selected frequencies. If you are a licensed amateur radio you should make sure you operate on the bands allocated in your region as some bands are exclusive to a specific region or country. ![LimeRFE USB dialog](../doc/img/LimeRFEUSB_dialog.png) @@ -49,7 +49,7 @@ Depending on the channel group selected in (A.1) use this combo to select the ba

HAM channels

- - **<30MHz**: HF bands i.e. lowpass up to 30 MHz + - **<30MHz**: HF bands i.e. low-pass up to 30 MHz - **50-70MHz**: covers the 6m and 4m bands - **144-146MHz**: covers the 2m band - **220-225MHz**: covers the 1.25m band (region 2) @@ -70,8 +70,8 @@ Depending on the channel group selected in (A.1) use this combo to select the ba Select which port to connect the Rx to: - - **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a diplexer internally - - **Tx/Rx 30M (J5)**: HF port only available when wideband channels are selected + - **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a duplexer internally + - **Tx/Rx 30M (J5)**: HF port only available when wide band channels are selected

A.4 Attenuator

@@ -101,7 +101,7 @@ Use this combo to select the band. This is identical to the Rx side (A.2). Select which port to connect the Rx to: - - **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a diplexer internally + - **Tx/Rx (J3)**: this is the J3 port combining Rx and Tx. When cellular bands are selected this is connected to a duplexer internally - **Tx (J4)**: Tx connected port only. Can be used to split Rx and Tx to drive a higher power P.A. for example

C. Power and SWR