f4exb
64b198e507
HackRF: suppression of Rx to Tx link frequency. Synchronization of Tx to Rx device center frequency.
2019-03-30 20:44:55 +01:00
f4exb
6cbee2070f
Perseus: corrected startup sequence to restart full enumeration sequence if firmware is missing initially. Fixes cold start flawed init sequence
2019-03-14 23:02:51 +01:00
f4exb
ee7c2cee0d
Windows build updates
2019-03-13 01:08:53 +01:00
Sebastian Weiss
af2cb5462c
implement networked PlutoSDR
2019-03-02 17:47:00 +01:00
Robin Getz
95edff4985
plutosdr: grab the RF bandwidth range from the device
...
This will use the RF bandwidth from the device, which is different
between AD9363 and AD9364.
Things are now managed like the device likes - analog low pass bandwidth
is RF (complex) bandwidth, not baseband single I or Q bandwidth.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2019-02-01 16:42:08 -05:00
f4exb
f941887a22
Windows: fallen back to libusb 1.0.21
2019-01-27 18:26:00 +01:00
f4exb
5ad63b7376
XTRX: refactored GPS lock test using workaround using change in 1PPS iterval clock counts. Fixes hanging for 1PPS signal
2019-01-20 00:52:57 +01:00
f4exb
3826b1faeb
XTRX fixes (2)
2019-01-17 01:27:07 +01:00
f4exb
83883efcb5
Fixed missing display settings of transverted data where missing
2019-01-16 21:28:35 +01:00
f4exb
4c1e2a26cc
Remove XTRX from Debian build
2019-01-05 17:51:52 +01:00
f4exb
b5a7425f1e
PlutoSDR: some minor changes to pull request #269 (Get LO range from device) and get Tx LO range also from device
2019-01-04 11:23:54 +01:00
f4exb
01269ac07e
Merge pull request #269 from rgetz/pluto_get_LO_range
...
pluto: Get LO range from device
2019-01-04 10:51:22 +01:00
f4exb
a5c2de87a8
XTRX: corrected debug message
2019-01-04 10:49:15 +01:00
f4exb
733f3d4ba4
XTRX: make clock gen setting consistent
2019-01-04 04:45:52 +01:00
Robin Getz
333273b3cb
pluto: Get LO range from device
...
When updating firmware, the devices which have AD9364s on them, get
reset to the default of a AD9363 (tuning range of 325 to 3800 MHz).
SDRAngel assumes a AD9364, and the GUI allows you to set LO settings
that the firmware doesn't support.
This ensures that does not happen, by going out to the hardware, and
querying the device to set the min/max limits on LO.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2019-01-03 12:46:40 -05:00
f4exb
56102acc96
XTRX: set block size back to 8k
2019-01-03 13:05:11 +01:00
f4exb
73a32a8cd7
XTRX output
2019-01-02 15:35:43 +01:00
f4exb
93f64eee70
Merge branch 'master' into dev
2019-01-01 19:00:07 +01:00
ZigaS
747c0c3cda
Depyloyment scrip update, QT project updates for OSX environment
2019-01-01 15:30:20 +01:00
f4exb
e2085e8c29
XTRX input: refactoring to prepare MI operation
2018-12-31 01:43:24 +01:00
f4exb
ecaa7f61b0
XTRX input: set global gain (auto) a la LimeSuite
2018-12-30 10:13:17 +01:00
f4exb
7d9b6f200e
XTRX: more messages
2018-12-30 00:44:37 +01:00
f4exb
f21dd8d6e5
XTRX input: removed useless status indicators and added GPS locked status
2018-12-29 11:07:14 +01:00
f4exb
0e7f8ff125
XTRX input: imported code from xtrx-sdr fork
2018-12-29 01:20:48 +01:00
f4exb
66efc10006
Merge branch 'dev'
2018-12-28 11:08:44 +01:00
ZigaS
b743943c70
Update to Qt 5.12.0.
...
Project files with MacOS clang RPATH to use proper paths for shared objects.
Minor path updates in favor of loading plugin libs.
Deployment script packaging using Qt way(macdeployqt).
2018-12-27 09:48:30 +01:00
f4exb
ca4f8d80e8
SoapySDR: removed more compilation dependencies on libusb
2018-12-19 13:22:49 +01:00
f4exb
4a69a7d39f
Adaptation of cmake files to MSVC
2018-12-02 03:06:04 +01:00
f4exb
fe0f506f50
SoapySDR support: new attempt for Debian build (3)
2018-12-01 10:12:15 +00:00
f4exb
d225bf9378
SoapySDR support: new attempt for Debian build (2)
2018-12-01 10:09:10 +01:00
f4exb
f3b75ead00
LimeSDR: detect Lime hardware type. Interface with GPIO only for SPI and USB type
2018-11-29 23:37:34 +01:00
f4exb
83b66eb6f1
LimeSDR: report GPIO pins values in the GUI
2018-11-29 13:57:04 +01:00
f4exb
5319eac2ff
LimeSDR REST API: support GPIO
2018-11-29 01:21:44 +01:00
f4exb
f96978d196
Windows MSVC2017: PlutoSDR support
2018-11-28 18:30:11 +01:00
f4exb
bc7ad10f9d
Use C++11 everywhere
2018-11-24 21:21:04 +01:00
f4exb
9d0bcc7e5c
SoapySDR support: removed from Debian build
2018-11-24 19:55:37 +01:00
f4exb
2e75ed4a2f
SoapySDR support: fixed Debian build
2018-11-23 01:26:17 +01:00
f4exb
ca36f757e1
SoapySDR support: Debian: added internal soapysdr library
2018-11-23 01:06:56 +01:00
f4exb
bc50bf9afa
Windows: MSVC2017: BladeRF support
2018-11-16 13:44:58 +01:00
f4exb
1da6f64a25
Windows: MSVC2017: use default path for SoapySDR
2018-11-16 13:07:21 +01:00
f4exb
710718682f
SoapySDR support: if no label is registered for the device then create one with the driver name and sequence
2018-11-16 11:19:04 +01:00
f4exb
8e5a332b50
Windows: MSVC2017: use default PothosSDR install directory
2018-11-16 10:47:30 +01:00
f4exb
cb9d300109
Windows: MSVC2017: soapysdrinput (1)
2018-11-15 19:07:15 +01:00
f4exb
ee95e1d617
Windows: MSVC2017: include LimeSDR plugins
2018-11-14 18:02:45 +01:00
f4exb
40deb5dc72
HackRF: enhance device operations error messages
2018-11-13 21:11:17 +01:00
f4exb
977a2abd90
Windows: MSVC2017: adapt hackrfinput plugin module
2018-11-13 11:08:34 +01:00
f4exb
7574cb23d4
Windows: MSVC2017: fixed more attribute unused cases (2)
2018-11-13 08:51:14 +01:00
f4exb
dc2f25a00b
Windows: MSVC2017: fixed more attribute unused cases (1)
2018-11-13 00:45:03 +01:00
f4exb
cdacf51bfb
Windows: MSVC2017: fixed some attribute unused cases
2018-11-12 15:48:41 +01:00
f4exb
696e7324a4
SoapySDR support: device arg GUI
2018-11-12 01:10:51 +01:00
f4exb
97ee2cd5be
Windows: experimental MSVC2017 toolchain (2)
2018-11-09 19:06:23 +01:00
f4exb
bf3fdcbfc2
SoapySDR support: input: antenna selection GUI
2018-11-04 23:54:16 +01:00
f4exb
2bc59154bf
SoapySDR support: output: fixed sample FIFO resizing
2018-11-04 18:56:57 +01:00
f4exb
ea98f2e1c9
SoapySDR support: input: center frequency and sample rate handling
2018-11-02 02:33:04 +01:00
f4exb
cc08f42ea6
SoapySDR support: GUI component to deal with ranges with discrete values
2018-11-01 02:32:26 +01:00
f4exb
9c459ca336
SoapySDR support: get and print device parameters applied to input
2018-10-31 12:22:46 +01:00
f4exb
ee6a7e4653
SoapySDR support: device parameters
2018-10-31 01:26:21 +01:00
f4exb
0d09958483
SoapySDR support: input: settings and thread output: settings
2018-10-30 20:31:16 +01:00
f4exb
124af5a7b4
SoapySDR support: input: open and close
2018-10-30 01:58:39 +01:00
f4exb
d8b82ddecd
SoapySDR support: set enumeration serial to driver and sequence so buddies are paired appropriately
2018-10-30 00:19:51 +01:00
f4exb
0e9a0f4f6d
SoapySDR support: use singleton for enumeration and device management
2018-10-29 17:20:04 +01:00
f4exb
c82d838708
SoapySDR support: build infrastructure and input plugin enumeration
2018-10-29 16:39:25 +01:00
f4exb
6269125d2c
BladeRF2: fixed Tx channel enable/disable wrapping routine thus fixing issue #225
2018-10-09 02:08:06 +02:00
f4exb
f4976485fc
BladeRF2 output: tried to fix SO->MO and MO->SO cycle
2018-10-02 06:11:34 +02:00
f4exb
b5c4b532ae
BladeRF2 input: implemented LO soft correction
2018-09-30 10:26:53 +02:00
f4exb
b0d17193d6
BladeRF output: fix open channel indicators array initialization so that SO Tx starts correctly
2018-09-30 07:34:47 +02:00
f4exb
53ff8f32bf
BladeRF2 output: fixed SO mode
2018-09-29 21:40:22 +02:00
f4exb
c27acf086e
BladeRF output (1) and some cosmetic changes
2018-09-29 05:49:14 +02:00
f4exb
3ac55eacf3
Windows build: upgrade to libusb 1.0.22. Modified install script for BladeRF
2018-09-28 16:45:08 +02:00
f4exb
2a1f0a0d0e
BladeRF input: communicate Fc Pos change to buddy to align center frequencies
2018-09-27 23:38:23 +02:00
f4exb
5c09985664
libbladerRF2: Windows build for bladerf2input plugin
2018-09-27 10:50:33 +02:00
f4exb
3a4324a7fb
BladeRF2 input: fixed sample rate and center frequency rounding issues by sending these values in the report to buddy message
2018-09-27 05:17:34 +02:00
f4exb
2373dcf197
libbladerRF2: Windows support with OOT build of libbladeRF
2018-09-26 18:59:52 +02:00
f4exb
5ad52a4a1b
BladerRF2 input support. Populate gain modes
2018-09-25 17:03:34 +02:00
f4exb
5f2a4e8c83
BladerRF2 input support. Trying to fix threading issue
2018-09-25 14:19:57 +02:00
f4exb
47a4da4142
BladerRF2 input support (8). Streams but thread issue
2018-09-25 08:45:57 +02:00
f4exb
b20feec1fd
BladerRF2 input support (7). GUI and Plugin
2018-09-25 00:38:38 +02:00
f4exb
7dfe094364
BladerRF2 input support (5). Global notification of changes to buddies
2018-09-24 17:32:40 +02:00
f4exb
df505fcdef
BladerRF2 input support (4)
2018-09-24 08:43:16 +02:00
f4exb
945d30d91b
BladerRF2 input support (3)
2018-09-24 02:01:10 +02:00
f4exb
f7af0a4ac2
BladerRF2 input support (2)
2018-09-23 19:56:24 +02:00
f4exb
d808f049f6
BladerRF2 input support (1)
2018-09-22 10:39:09 +02:00
f4exb
57ef3a0567
BladeRF: fixed devices build and add BladeRF2 device
2018-09-22 02:55:40 +02:00
f4exb
8433f63a9b
LibbladeRF2: migrate devices/bladerf to devices/bladerf1
2018-09-19 05:26:18 +02:00
f4exb
d596931209
LibbladeRF2: make bladeRF1 work
2018-09-18 23:12:00 +02:00
Edouard GRIFFITHS
ea83e43d09
New Windows build
2018-07-11 18:05:05 +02:00
f4exb
7767d538f6
BladeRF: cleanup: removed useless fixed sample rates support
2018-05-26 02:17:49 +02:00
f4exb
72e29fd3f8
Moved export.h file to root of exports directory and removed util
2018-03-20 13:49:21 +01:00
f4exb
55cd795eb4
LimeSDR: fix NCO direction as Tx is opposed to Rx
2018-03-15 23:48:25 +01:00
f4exb
f75b45a1c1
Merge branch 'master' into dev
2018-03-14 19:18:20 +01:00
f4exb
a9887bcdaa
LimeSDR input GUI: NCO and baseband center frequency now show actual values
2018-03-14 06:30:45 +01:00
f4exb
9e90709584
Revert "LimeSDR: Temporary fix for rubbish values returned by recent version of Lime Sute"
...
This reverts commit 8312e5ad58
2018-03-13 19:56:40 +01:00
ZigaS
815d4cceac
Rebuild of 3.12.0 version on macOS 10.12.6 (16G1212).
2018-03-13 13:50:34 +01:00
f4exb
8312e5ad58
LimeSDR: Temporary fix for rubbish values returned by recent version of Lime Sute
2018-03-11 01:48:43 +01:00
f4exb
b2e446afcc
Windows build: new location for export header
2018-03-10 20:32:46 +01:00
f4exb
28e9df5fe8
Clang clean compile
2018-03-04 01:47:51 +01:00
f4exb
c22d146376
Adapt to MSVC linker
2018-03-03 20:23:38 +01:00
f4exb
2e5cfcafee
PVS-Studio static analysis corrections (3) issue #137
2018-02-24 10:29:27 +01:00
f4exb
afe665cf33
Windows build: removed libperseus dependency
2018-02-22 08:42:44 +01:00
f4exb
2b846f5d28
PVS-Studio static analysis corrections (2) issue #137
2018-02-22 03:04:42 +01:00
