f4exb
b120f9cb01
Rewriting of copyright notices for all but plugins (done), sdrbase, sdrgui. Part of #1893
2023-11-19 13:43:10 +01:00
f4exb
94d037aa16
PlutoSDR MIMO: fixed MO thread and att setting in GUI
2021-05-04 17:01:48 +02:00
f4exb
672c0b8a5b
PlutoSDR MIMO: base implementation
2021-05-04 17:01:48 +02:00
f4exb
54222ff016
PlutoSDRBox: use channels registered at contruction time
2021-05-04 17:01:47 +02:00
Felix Schneider
c4ccb59e95
Clean up iq sampling fix
2020-08-19 10:02:50 +02:00
Felix Schneider
7848b01987
Open both I and Q channels on plutosdr and change the inputthread accordingly
2020-08-19 09:11:20 +02:00
f4exb
1255784b7f
PlutoSDR input: implement control of hardware DC and IQ corrections
2019-07-25 13:57:24 +02:00
f4exb
ef15157a50
Fixed incomplete copyright headers (1)
2019-04-11 06:39:30 +02:00
Robin Getz
95edff4985
plutosdr: grab the RF bandwidth range from the device
...
This will use the RF bandwidth from the device, which is different
between AD9363 and AD9364.
Things are now managed like the device likes - analog low pass bandwidth
is RF (complex) bandwidth, not baseband single I or Q bandwidth.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2019-02-01 16:42:08 -05:00
f4exb
b5a7425f1e
PlutoSDR: some minor changes to pull request #269 (Get LO range from device) and get Tx LO range also from device
2019-01-04 11:23:54 +01:00
Robin Getz
333273b3cb
pluto: Get LO range from device
...
When updating firmware, the devices which have AD9364s on them, get
reset to the default of a AD9363 (tuning range of 325 to 3800 MHz).
SDRAngel assumes a AD9364, and the GUI allows you to set LO settings
that the firmware doesn't support.
This ensures that does not happen, by going out to the hardware, and
querying the device to set the min/max limits on LO.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2019-01-03 12:46:40 -05:00
f4exb
f96978d196
Windows MSVC2017: PlutoSDR support
2018-11-28 18:30:11 +01:00
f4exb
72e29fd3f8
Moved export.h file to root of exports directory and removed util
2018-03-20 13:49:21 +01:00
f4exb
c22d146376
Adapt to MSVC linker
2018-03-03 20:23:38 +01:00
f4exb
4536680adf
PlutoSDR device handling: fixed Tx channels
2017-10-29 03:01:44 +01:00
f4exb
e87ee16302
PlutoSDR input: display actual gain value returned from device
2017-10-09 02:18:04 +02:00
f4exb
9ba88b396b
PlutoSDR: remove from device enumeration if device is not accessible (allocate context fails)
2017-09-23 03:42:58 +02:00
f4exb
c2b7092026
PlutoSDR output: interim state (2)
2017-09-19 08:33:26 +02:00
f4exb
629fc9ce79
PlutoSDR input: restore full range of FIR Rx gain
2017-09-11 23:51:58 +02:00
f4exb
d5d769d8d7
PlutoSDR input: restored FIR filter controls
2017-09-10 18:35:38 +02:00
f4exb
97c137197b
PlutoSDR: reset sample rate setting via strings. Enable IQ, BB DC and RF DC tracking by default at device open
2017-09-10 12:07:54 +02:00
f4exb
04d06085fe
PlutoSDR: debug (3)
2017-09-10 10:16:23 +02:00
f4exb
ceb304cb9f
Downgraded to version 3.6.2
2017-09-09 15:34:04 +02:00
f4exb
aa047c77cc
PluoSDR: debug (1)
2017-09-09 03:09:17 +02:00
f4exb
868cac90f0
PlutoSDR input: implemented the rest of apply settings
2017-09-07 23:27:24 +02:00
f4exb
e4d1aa121c
PlutoSDR: set FIR filter (3)
2017-09-07 22:24:09 +02:00
f4exb
11b657a841
PlutoSDR: set FIR filter (2)
2017-09-07 18:41:55 +02:00
f4exb
7acd2bb7ed
PlutoSDR: set FIR filter (1)
2017-09-07 08:49:22 +02:00
f4exb
5a05cf14bb
PlutoSDR input: implemented input class interim state (2)
2017-09-07 06:15:39 +02:00
f4exb
7b437e41ba
PlutoSDR input: implemented input class interim state (1)
2017-09-06 18:48:58 +02:00
f4exb
e1c3a66983
PlutoSDR input: added thread class
2017-09-06 06:15:38 +02:00
f4exb
8ab3ad3b63
PlutoSDR: added read param method to device box
2017-09-05 15:06:40 +02:00
f4exb
de88e305db
PlutoSDR: added PlutoSDRDevice and PlutoSDRScan common device classes
2017-09-02 04:21:41 +02:00
