Jon Beniston
d52f2569c6
#1031 - RemoteInput GUI - Use editingFinished signal rather than returnPressed
2021-11-02 11:20:30 +00:00
Edouard Griffiths
a9fb5b91ec
Merge pull request #1032 from srcejon/rtlsdr_biastee
...
RTLSDR: Restore biasT widget state in displaySettings
2021-11-02 00:51:49 +01:00
Jon Beniston
0d3d02681c
RTLSDR: Report biasT widget state in displaySettings
2021-11-01 11:16:58 +00:00
Jon Beniston
499b051f38
RemoteInput
...
Set default value of API port to 8091, as used elsewhere.
Fix spelling mistakes in readme.
Update tooltip to clarify data address is for reception.
2021-11-01 10:50:42 +00:00
f4exb
611171234a
Updated versions and changelogs
2021-09-05 22:40:56 +02:00
f4exb
0ec7ec414d
SDRplay V3: added device type in API report
2021-08-25 15:27:06 +02:00
f4exb
786d753ec9
SDRPlayV3: correct API hardware ID
2021-08-25 15:03:30 +02:00
f4exb
e034a18de1
Updated versions and changelogs
2021-08-08 06:36:18 +02:00
Andreas Baulig
e8a8ef6f3d
Switch FileRecord timestamp resolution to milliseconds
2021-08-04 14:12:24 +00:00
f4exb
a151cdfe12
Updated versions and changelogs
2021-07-13 22:28:03 +02:00
Franco Venturi
bd00adab97
fix typo in 'cannot set frquency' error message
2021-07-05 22:32:57 -04:00
Franco Venturi
be2dbabafe
sdrplayv3 plugin: wait for rf updates to be fully completed when changing center frequency, bandwidth, or IF
2021-07-05 18:02:56 -04:00
f4exb
a57c856a26
Updated versions and changelogs
2021-06-27 19:17:28 +02:00
Jon Beniston
631b9c256f
Refactor common code into WavFileRecord class
2021-05-21 21:05:23 +01:00
Jon Beniston
80fe6cb096
Add signed 16-bit PCM 2 channel .wav file support to File Input and File Record plugins
2021-05-21 10:06:10 +01:00
f4exb
54222ff016
PlutoSDRBox: use channels registered at contruction time
2021-05-04 17:01:47 +02:00
f4exb
0626eb17f7
Added missing plugin for fixing #842
2021-04-17 18:15:03 +02:00
f4exb
76f09a17a7
Fixed wrong structure being used in some sample source and sink plugins web API adapters. Fixes #842
2021-04-15 15:30:29 +02:00
f4exb
6ad057e935
Updated versions and changelogs
2021-04-13 10:25:17 +02:00
Jon Beniston
e8ef6f9a53
Add driver requirements for SDRplayV3
2021-04-12 11:13:35 +01:00
Jon Beniston
2b567c49b3
Use better default settings for SDRplayV3
2021-04-12 10:33:34 +01:00
Jon Beniston
b21e9556e3
Only call API when running (so after call to init)
2021-04-12 10:04:36 +01:00
Jon Beniston
6dce90f9a5
Fix gcc warning
2021-04-11 21:37:01 +01:00
Jon Beniston
7aebff1082
Add SDRplay V3 API sample source.
2021-04-11 21:21:36 +01:00
f4exb
dcae5e29e2
Remote input and output documentation and GUI changes related to only getting remote information. Fixes #832
2021-04-03 07:23:02 +02:00
f4exb
0a713e4d30
Updated versions and changelogs
2021-03-29 21:21:32 +02:00
f4exb
e3e8249987
HackRF: generalize hardware LO correction to output plugin
2021-03-29 05:59:00 +02:00
f4exb
3fafd22af1
HackRF input: reformat and reorganize code of PR #824
2021-03-29 05:42:45 +02:00
FuzzyCheese
295e1f52bf
hackrfinput - Change LO ppm to adjust the hardware clocks.
...
LO ppm now adjusts the primary clock in the hackrf one instead of offsetting the freq in software. The offset adjusts all clocks except the CPU which currently uses it's own crystal.
There is room for improvement but I tried to keep it simple and keep the user interface the same for now.
2021-03-28 21:35:57 -05:00
FuzzyCheese
be85e680e0
hackrfinput - add auto bandpass filter selection
...
Add button to auto select the bandpass filter based on the sample rate. It matches the automatic selection done by libhackrf when sample rate is changed.
2021-03-19 23:50:56 -05:00
your name
c59a394111
hackrfinput - restore baseband filter
...
Restore baseband filter setting. libhackrf automatically sets baseband filter when sample rate is set and it leads to a settings mismatch between gui and hardware.
2021-03-19 18:36:29 -05:00
Jon Beniston
802749afd3
Check sample rate is non-zero to avoid divide by zero
2021-03-08 21:41:46 +00:00
f4exb
587f95bf48
MSVC: removed wrong dll exports in plugins
2021-03-07 09:25:44 +01:00
Jon Beniston
bf9d5501b0
Allow filename to be restored from settings.
...
Allow filename to be set via API.
2021-03-05 15:55:44 +00:00
f4exb
19b809affb
Updated versions and changelogs
2021-02-28 20:36:17 +01:00
f4exb
262a75beec
RTL-SDR: increase LO ppm range to +/-200
2021-02-23 06:56:26 +01:00
f4exb
19f3c284ba
Updated versions and changelogs
2021-02-07 11:09:43 +01:00
Kacper Michajłow
daacc6a15d
RTL-SDR: Adjust BW range limits
...
0 is so automatic mode, so allow to set that
2021-02-06 22:40:02 +01:00
Kacper Michajłow
45ea4ed243
SoapySDR: Support native formats that reports diffrent fullrange values
2021-02-06 22:40:02 +01:00
Kacper Michajłow
21255f8d82
SoapySDR: Process number of elements that actually were returned, not requested
2021-02-06 22:40:02 +01:00
Jon Beniston
43d71251bf
Add 128 and 256 decimation for AirspyHF
2021-02-01 16:40:23 +00:00
Christoph Berg
0d6a3a4f47
Fix some typos spotted by lintian
2021-01-19 12:36:56 +01:00
f4exb
4059a0be27
Reworked ARM Neon detection and remote plugins inclusion in the build
2020-11-23 21:16:25 +01:00
f4exb
f155d63580
Remote plugins: add USE_NEON definition for compatibility with cm256cc on ARM64. Fixes issue #720
2020-11-23 08:34:20 +01:00
f4exb
1d5742d3b9
Removed useless CPU flags. Fixes issue #720
2020-11-23 01:44:52 +01:00
Kacper Michajłow
f2d01b61d3
Avoid global QString init in plugins
...
This workarounds issue with LTO with GCC #716
2020-11-22 04:06:32 +01:00
Kacper Michajłow
cf70d9430f
Use QStringLiteral when it make sense
2020-11-22 04:05:04 +01:00
f4exb
b396a190de
Implement SigMF support only when compiled with GCC (libsigmf dependency). Implements #712
2020-11-21 20:00:32 +01:00
f4exb
f81f705883
Audio input: fixed improper initialization of m_worker
2020-11-21 18:55:41 +01:00
f4exb
696c6c9379
Fixed remaining warnings
2020-11-15 12:02:04 +01:00
