f4exb
|
b226c594df
|
LimeSDR: increased start/stop stream wait time to 50ms to fixed possible stability issues when changes are applied
|
2017-11-11 06:02:09 +01:00 |
|
f4exb
|
23b9450c56
|
LimeSDR: fixed amalog LP bandwidth filter and general calibration
|
2017-11-09 17:31:32 +01:00 |
|
f4exb
|
3ff2b68fa7
|
LimeSDR output: updated documentation
|
2017-11-05 17:24:28 +01:00 |
|
f4exb
|
17dd0f5daf
|
LimeSDR: optimize external clock frequency change by not doing it if the frequency is changed and external clock is disabled
|
2017-11-05 10:31:41 +01:00 |
|
f4exb
|
41eaa957f1
|
LimeSDR: fixed missing message handling for external clock change
|
2017-11-05 10:16:36 +01:00 |
|
f4exb
|
5a2b16d464
|
LimeSDR: implemented external clock frequency handling in the GUI
|
2017-11-05 05:59:04 +01:00 |
|
f4exb
|
045652f5cb
|
Added exernal clock dialog and button and implemented it in LimeSDR plugins GUIs
|
2017-11-05 05:50:01 +01:00 |
|
f4exb
|
77a5cf3a21
|
LimeSDR: added external clock control button to the GUIs
|
2017-11-04 03:15:07 +01:00 |
|
f4exb
|
2ec8270e99
|
LimeSDR: handle clock source change in source and sink
|
2017-11-04 02:18:16 +01:00 |
|
f4exb
|
7f8d61cdb0
|
LimeSDR: use channel set in device management via device API
|
2017-11-02 10:30:07 +01:00 |
|
f4exb
|
31c7ebf36c
|
Enumerate file and sdrdaemon plugins the new way
|
2017-11-02 03:42:59 +01:00 |
|
f4exb
|
9a055c643b
|
Store device category (type) in the SamplingDevice structure
|
2017-11-01 20:06:33 +01:00 |
|
f4exb
|
7370eba0f7
|
Bumped version to v3.8.0
|
2017-11-01 14:58:36 +01:00 |
|
f4exb
|
66b06dcd08
|
Added Rx/Tx indicator, channel index and claiming device set index to the SamplingDevice struct used for device enumeration
|
2017-11-01 10:37:00 +01:00 |
|
f4exb
|
2deccbc259
|
LimeSDR: have still a 1ms delay after start/stop stream as it makes the Tx gain setting a bit more fluid
|
2017-10-30 03:02:45 +01:00 |
|
f4exb
|
c3de895301
|
Removed direct reference to the DeviceSinkAPI in the sink GUIs. Removed DeviceSourceAPI forward declaration in source GUI headers
|
2017-10-30 02:54:22 +01:00 |
|
f4exb
|
35391e0d66
|
Removed GLSpectrum getter from DeviceSinkAPI
|
2017-10-30 01:11:35 +01:00 |
|
f4exb
|
e8fb70096c
|
LimeSDR: fixed lockup problem by moving start/stop stream from thread run method to start/stop work methods
|
2017-10-29 18:38:04 +01:00 |
|
f4exb
|
c7e7bf3480
|
PlutoSDR support restored again fixing Rs and Tx living together
|
2017-10-29 14:51:56 +01:00 |
|
f4exb
|
2c4a748ebe
|
PlutoSDR support removed again
|
2017-10-29 12:02:24 +01:00 |
|
f4exb
|
08b3ebd305
|
PlutoSDR output: fixed transmission of samples
|
2017-10-29 03:58:51 +01:00 |
|
f4exb
|
69f5afd057
|
Removed PlutoSDR Tx support
|
2017-10-28 12:26:17 +02:00 |
|
f4exb
|
31d0334ddb
|
LimeSDR: updated documentation
|
2017-10-28 05:40:26 +02:00 |
|
f4exb
|
83e5dc5951
|
LimeSDR: reduced delay after LMS_StartStream and LMS_StopStream to 0.1s
|
2017-10-27 01:10:22 +02:00 |
|
f4exb
|
46ec8e17d2
|
LimeSDR: cleaned up apply settings method code removing obsolete suspend/resume threads logic
|
2017-10-27 01:00:51 +02:00 |
|
f4exb
|
8ddc852239
|
LimeSDR: introduced a 0.5s delay after LMS_StartStream and LMS_StopStream and cleaned up some commented code
|
2017-10-27 00:53:34 +02:00 |
|
f4exb
|
7ca778038e
|
LimeSDR: paint stream status icon in green only if stream is active. If stream is inactive but a valid status is obtained it is paint in blue
|
2017-10-27 00:22:58 +02:00 |
|
f4exb
|
9f765a9732
|
LimeSDR: changes that reflect discussion on MyriadRF discourse forum but does not solve the stream concurrency problem
|
2017-10-26 23:57:56 +02:00 |
|
f4exb
|
ca14e41e1c
|
LimeSDR: use LMS_GetSampleRate to get the actual rates when MsgReportBuddyChange comes from an opposite buddy
|
2017-10-26 01:47:43 +02:00 |
|
f4exb
|
124404aa18
|
LimeSDR still unreliable but comitting as is
|
2017-10-26 00:48:50 +02:00 |
|
f4exb
|
e9af2f6dff
|
LimeSDR: suspend buddy threads only around calls to LMS_SetupStream or LMS_DestroyStream. In output plugin move them back to open/close (undoes #50)
|
2017-10-25 22:20:30 +02:00 |
|
f4exb
|
8b93c5f48d
|
LimeSDR: pass center frequency change to buddies of same type
|
2017-10-25 01:38:39 +02:00 |
|
f4exb
|
cd5f0c361a
|
LimeSDR: apply settings: suspend/resume own thread
|
2017-10-25 01:23:48 +02:00 |
|
f4exb
|
b5c0eb9f9d
|
LimeSDR: reverted changes of commit 78490ff: reinstated the apply settings forced at start time
|
2017-10-25 00:23:12 +02:00 |
|
f4exb
|
78490ffff0
|
LimeSDR: removed applySettings from start sequence as it has nothing to do here
|
2017-10-24 08:37:32 +02:00 |
|
f4exb
|
2572f2be84
|
LimeSDR: removed obsolete message. Only stop current side threads if changing center frequency
|
2017-10-24 02:41:54 +02:00 |
|
f4exb
|
238c8d312e
|
LimeSDR: device sample rate and hardware decimation/interpolation handling fix and simplification
|
2017-10-24 02:20:57 +02:00 |
|
f4exb
|
1b95457d96
|
Device source and sink APIs: removed direct reference to main window
|
2017-10-22 23:50:10 +02:00 |
|
f4exb
|
fa77ca3fb6
|
Code re-organization in two libraries sdrbase and sdrgui in view of core / GUI split
|
2017-10-22 19:12:43 +02:00 |
|
f4exb
|
a61348948a
|
LimeSDR and BladeRF output: do not resize sample FIFO to a fixed value in the thread constructor
|
2017-10-15 17:37:53 +02:00 |
|
f4exb
|
91903dc87e
|
FileSink SDRdaemonSink: fixed segfault when message queue to GUI is not available
|
2017-10-14 07:40:16 +02:00 |
|
f4exb
|
0eab0fdb20
|
DeviceSampleSink: removed output queue to GUI
|
2017-10-14 07:34:00 +02:00 |
|
f4exb
|
ca674efb24
|
FileSink output: force settings at startup and on deserialize
|
2017-10-14 07:28:57 +02:00 |
|
f4exb
|
2d27235769
|
HackRF output: force settings at startup and on deserialize
|
2017-10-14 07:13:57 +02:00 |
|
f4exb
|
6b1f0cc2fd
|
BladeRF output: force settings at startup and on deserialize
|
2017-10-14 07:10:42 +02:00 |
|
f4exb
|
ccd2e04f0b
|
LimeSDR output: force settings at startup and on deserialize
|
2017-10-14 06:30:31 +02:00 |
|
f4exb
|
dcfdffaf49
|
LimeSDR output: suspend/resume buddies threads before/after start/stop
|
2017-09-30 20:25:20 +02:00 |
|
f4exb
|
d524378d8e
|
LimeSDR: put the code to suspend buddies in one place
|
2017-09-30 20:07:08 +02:00 |
|
f4exb
|
c4bad4d834
|
CRLF problem
|
2017-09-28 14:07:41 +02:00 |
|
f4exb
|
0b6eb2129a
|
Reset PluginInstanceGUI to its original name
|
2017-09-26 00:22:08 +02:00 |
|
f4exb
|
d9d1b8bfec
|
FunCube Pro input: implemented transverter feature
|
2017-09-25 20:16:25 +02:00 |
|
f4exb
|
37d44038f4
|
PlutoSDR output: implemented transverter feature
|
2017-09-25 19:11:13 +02:00 |
|
f4exb
|
d77f3ad72e
|
PlutoSDR: Remove from device enumeration if device is not accessible. Bumped version to 3.7.2
|
2017-09-23 03:46:01 +02:00 |
|
f4exb
|
dc2b705807
|
PlutoSDR: updated documentation
|
2017-09-21 21:26:28 +02:00 |
|
f4exb
|
e127952c19
|
LimeSDR output: added documentation
|
2017-09-20 22:32:16 +02:00 |
|
f4exb
|
871f0eeb22
|
LimeSDR output: limit interpolation factor to 32
|
2017-09-20 22:31:42 +02:00 |
|
f4exb
|
752ceab420
|
PlutoSDR: fixed warnings and use smaller Rx block to get smoother waterfall
|
2017-09-20 20:52:41 +02:00 |
|
f4exb
|
d1061a3c2f
|
LimeSDR: Rx/Tx interaction
|
2017-09-20 18:25:54 +02:00 |
|
f4exb
|
a81ea47da3
|
PlutoSDR output: change arrows direction to indicate interpolation
|
2017-09-20 00:53:30 +02:00 |
|
f4exb
|
37300fb5ae
|
LimeSDR output: added dB units on attenuation value display
|
2017-09-20 00:47:34 +02:00 |
|
f4exb
|
10b8f786b1
|
LimeSDR output: try to minimize latency
|
2017-09-20 00:21:06 +02:00 |
|
f4exb
|
e4c1892930
|
PlutoSDR: clear the device scan list before (re)scanning
|
2017-09-19 23:11:03 +02:00 |
|
f4exb
|
dc0d9d9e0a
|
LimeSDR output: fixed build and compile
|
2017-09-19 22:11:55 +02:00 |
|
f4exb
|
03fba87e46
|
LimeSDR output: added to build
|
2017-09-19 22:00:28 +02:00 |
|
f4exb
|
0aee699855
|
PlutoSDR output: Windows build and fixed compilation errors
|
2017-09-19 14:32:39 +02:00 |
|
f4exb
|
c2b7092026
|
PlutoSDR output: interim state (2)
|
2017-09-19 08:33:26 +02:00 |
|
f4exb
|
35717477d6
|
PlutoSDR output: interim state (1)
|
2017-09-18 23:47:36 +02:00 |
|
f4exb
|
9b5c999d61
|
LimeSDR: added device description string
|
2017-09-18 23:29:55 +02:00 |
|
f4exb
|
a9a514993b
|
Windows build: corrections for the new tool chain
|
2017-09-18 13:41:08 +02:00 |
|
f4exb
|
7d12ddaf47
|
LimeSDR: more debug messages for source/sink buddy messages
|
2017-09-18 01:42:45 +02:00 |
|
f4exb
|
9fd807b90d
|
LimeSDR input: less verbose debug on input message handling
|
2017-09-18 01:16:44 +02:00 |
|
f4exb
|
116c5438e1
|
LimeSDR: fixed device pointer handling
|
2017-09-18 01:11:15 +02:00 |
|
f4exb
|
b5a7a65d85
|
LimeSDR: set buddy configuration from the source or sink and not from the GUI
|
2017-09-18 01:05:08 +02:00 |
|
f4exb
|
d59d2a2372
|
LimeSDR: use more meaningful names for messages to buddies
|
2017-09-18 00:08:28 +02:00 |
|
f4exb
|
a714e12387
|
HackRF: effective Rx-Tx frequency linking
|
2017-09-18 00:01:29 +02:00 |
|
f4exb
|
512900d98c
|
Finalized the new source/sink GUI messaging scheme
|
2017-09-17 17:35:03 +02:00 |
|
f4exb
|
2b4f8a0f55
|
Implemented GUI input message queue and interface
|
2017-09-16 22:23:31 +02:00 |
|
f4exb
|
9dd99a4530
|
Separate construction/destruction for the sink output plugin core and the GUI
|
2017-09-16 11:34:25 +02:00 |
|
f4exb
|
1d4cb21bb5
|
Separate construction/destruction for the source input plugin core and the GUI
|
2017-09-16 10:45:08 +02:00 |
|
f4exb
|
3cddc772b1
|
Output core creation method implementation in all sink plugins
|
2017-09-14 13:55:57 +02:00 |
|
f4exb
|
25c150c3c5
|
Created an input or output core creation method to the plugin interface. Example of implementation with Airspy
|
2017-09-14 08:49:31 +02:00 |
|
f4exb
|
87016e7485
|
Device sink API: renamed input and output message queues getters to more meaningful names
|
2017-09-13 23:42:28 +02:00 |
|
f4exb
|
24442c18a3
|
Device source API: renamed input and output message queues getters to more meaningful names
|
2017-09-13 23:40:06 +02:00 |
|
f4exb
|
11f6b72b8c
|
Windows build: restored mingW32 compilation
|
2017-09-12 13:54:32 +02:00 |
|
f4exb
|
0b4ee5cfcc
|
GUI segregation: Removed FileRecord reference in sample sink plugin GUIs
|
2017-09-04 11:07:59 +02:00 |
|
f4exb
|
4d5fdfc913
|
GUI segregation: renamed methods and attributes
|
2017-09-03 20:24:17 +02:00 |
|
f4exb
|
a6d6a717ae
|
GUI segregation: renamed PluginGUI interface to PluginInstanceUI
|
2017-09-03 19:55:00 +02:00 |
|
f4exb
|
e281d8fd32
|
GUI segregation: de-tangle PluginGUI interface from QWidget
|
2017-09-03 17:26:32 +02:00 |
|
f4exb
|
ec3a99451c
|
HackRF: use DeviceHackRF as a singleton to handle HackRF library init and exit only once
|
2017-09-01 00:46:43 +02:00 |
|
f4exb
|
2c3f7fe690
|
SDRDaemonSink: fixed compile warning in debug mode
|
2017-08-19 00:12:28 +02:00 |
|
f4exb
|
66a588403c
|
SDRDaemonSink: fixed compile error
|
2017-08-18 11:16:18 +02:00 |
|
f4exb
|
16f1f44c64
|
Bumped to version 3.6.0
|
2017-08-14 03:50:35 +02:00 |
|
f4exb
|
798d485342
|
LimeSDR: fixed issue #50 by moving channel acquisition and release at start and stop times. Corrections to buddies thread suspend/resume. Corrected void channel handling
|
2017-08-14 03:32:51 +02:00 |
|
f4exb
|
7182992d05
|
LimeSDR support removed from Windows: updated documentation
|
2017-08-10 02:26:11 +02:00 |
|
f4exb
|
7fba9b778d
|
Resizing of sample FIFO in output plugins: updated documentation
|
2017-08-10 00:52:20 +02:00 |
|
f4exb
|
75079de55d
|
BladeRF output: fixed sammple FIFO size for 32 and 64 (not implemented) interpolation
|
2017-08-09 22:59:46 +02:00 |
|
f4exb
|
e452a0882c
|
Bumped relevant plugins version to 3.5.5. Updated LimeSuite output documentation for LimeSuite 17.06.0
|
2017-08-09 02:00:13 +02:00 |
|
f4exb
|
6522f62326
|
BladeRF output: set FIFO size to 0.25s or 75 kS whichever is larger (300kS/s knee) except when decimating by 32 where a fixed 150 kS FIFO is used
|
2017-08-09 00:31:23 +02:00 |
|
f4exb
|
5829519116
|
BladeRF output: suspend thread when baseband sample rate changes
|
2017-08-08 23:09:51 +02:00 |
|
f4exb
|
3a9eec8463
|
HackRF output: set FIFO size to 0.25s or 150 kS whichever is larger (600kS/s knee)
|
2017-08-08 22:37:53 +02:00 |
|
f4exb
|
7b851e8326
|
HackRF output: suspend thread when baseband sample rate changes
|
2017-08-08 21:30:04 +02:00 |
|
f4exb
|
287bf8120d
|
HackRF output: removed useless method to set samplerate in the thread
|
2017-08-08 13:12:16 +02:00 |
|
f4exb
|
099583916f
|
LimeSDR output: use a stream FIFO size about 10% for a 5 MS/s rate (512k)
|
2017-08-08 01:19:11 +02:00 |
|
f4exb
|
894a4b2e94
|
Bumped to version 3.5.5
|
2017-08-08 00:29:18 +02:00 |
|
f4exb
|
3a84cd8526
|
LimeSDR output: used fixed time length with minimum length for sample FIFO
|
2017-08-08 00:25:13 +02:00 |
|
f4exb
|
ea4cb1bbfd
|
LimeSDR output: apply: defer config settings update after changes are made
|
2017-08-07 23:41:17 +02:00 |
|
f4exb
|
54a6bc6b62
|
LimeSDR output: removed useless update of sample rate
|
2017-08-07 23:22:29 +02:00 |
|
f4exb
|
566450501b
|
LimeSDR: apply settings: more data in debug message
|
2017-08-04 17:19:15 +02:00 |
|
f4exb
|
844628bc48
|
LimeSDR: corrected NCO de-tune when sample rate changes
|
2017-08-04 10:31:54 +02:00 |
|
f4exb
|
50c39b90a1
|
LimeSDR: clamp NCO lower limit to 0
|
2017-08-04 09:33:25 +02:00 |
|
f4exb
|
303cb1f3c3
|
bumped version to 3.5.2
|
2017-07-22 04:50:38 +02:00 |
|
f4exb
|
dd4ab0f0b5
|
HackRF: updated documentation
|
2017-07-21 08:34:54 +02:00 |
|
f4exb
|
361e8b0cd6
|
HackRF: implemented link Tx frequency to Rx frequency option
|
2017-07-21 00:44:30 +02:00 |
|
f4exb
|
258515b5de
|
HackRF: switch over Rx / Tx with the start button
|
2017-07-19 23:24:00 +02:00 |
|
f4exb
|
62b6281370
|
LimeSDR input: added DAC sample rate display
|
2017-07-07 00:01:01 +02:00 |
|
f4exb
|
77e11004b0
|
LimeSDR output: added DAC sample rate display
|
2017-07-06 22:59:29 +02:00 |
|
f4exb
|
4079d84d74
|
LimeSDR: updated GUI documentation
|
2017-07-04 08:39:46 +02:00 |
|
f4exb
|
efe921ffe7
|
LimeSDR output: optimize get device info by checking buddy leadership in the GUI
|
2017-07-03 23:29:06 +02:00 |
|
f4exb
|
034610721b
|
LimeSDR: fixed warnings
|
2017-07-03 22:35:08 +02:00 |
|
f4exb
|
99b100959f
|
LimeSDR output: implemented temperature reading
|
2017-07-03 16:58:46 +02:00 |
|
f4exb
|
3a24158743
|
Bumped to version 3.5.1
|
2017-06-27 05:53:09 +02:00 |
|
f4exb
|
a40a777e11
|
HackRF: extend LO ppm correction range to +/-30 (specs of AVX CX3225GB crystal: http://www.mouser.com/ds/2/40/cx3225gb_e-514151.pdf)
|
2017-06-24 23:42:03 +02:00 |
|
f4exb
|
8e63681185
|
HackRF: extend LO ppm correction range to +/-20
|
2017-06-24 22:29:47 +02:00 |
|
f4exb
|
e624141150
|
SDRdaemon plugins: fixed Debian build
|
2017-06-12 16:31:54 +02:00 |
|
f4exb
|
3650ca00b1
|
SDRdaemonSink documentation
|
2017-06-10 22:59:45 +02:00 |
|
f4exb
|
9c1a38a8cf
|
SDRdaemonFEC: implemented value dial for desired center frequency
|
2017-06-09 01:03:56 +02:00 |
|
f4exb
|
a60fac0679
|
SDRDaemonSink: fixed deserialization
|
2017-06-08 00:21:46 +02:00 |
|
f4exb
|
0935071f97
|
SDRDaemonSink: set the Tx delay as a percentage of the nominal UDP block transmission time
|
2017-06-08 00:01:56 +02:00 |
|
f4exb
|
e4332a16b6
|
SDRDaemonSink: GUI cosmetic changes
|
2017-06-06 01:53:21 +02:00 |
|
f4exb
|
5e62da4437
|
Standardize all output sinks to the same ready/running/error color status
|
2017-06-05 23:00:28 +02:00 |
|
f4exb
|
34b1910cd0
|
SDRdaemonSink: fixed remote address in case FEC is activated
|
2017-06-05 18:52:32 +02:00 |
|
f4exb
|
a86819ea70
|
SDRdaemonSink: lower Tx queue length target to 5 and implement quick start kick off
|
2017-06-05 16:47:56 +02:00 |
|
f4exb
|
1642a0d92c
|
SDRdaemonSink: implemented Tx queue stabilization
|
2017-06-05 01:18:35 +02:00 |
|
f4exb
|
5b48a3f4a9
|
SDRdaemonSink: GUI: display queue length and quality metrics received from remote Tx
|
2017-06-04 11:43:26 +02:00 |
|
f4exb
|
7b63657fb7
|
SDRdaemonSink: basic message receive from remote
|
2017-06-04 08:47:58 +02:00 |
|
f4exb
|
a217312032
|
SDRdaemonSink: activate GUI set and send buttons
|
2017-05-28 10:13:54 +02:00 |
|
f4exb
|
3b44a5367c
|
HackRF: fixed bandwidth selection
|
2017-05-26 17:42:57 +02:00 |
|
f4exb
|
ebe428e89a
|
SDRdaemonSink: fixed cmake file for Debian
|
2017-05-26 01:39:14 +02:00 |
|
f4exb
|
042368d04f
|
SDRdaemonSink: updated cmake file for Debian
|
2017-05-26 01:35:06 +02:00 |
|
f4exb
|
3a3d8e3dcb
|
activated compiler warnings
|
2017-05-25 20:13:34 +02:00 |
|
f4exb
|
d6f62a69dd
|
SDRDaemonSink: removed from Windows build entirely
|
2017-05-23 14:31:42 +02:00 |
|
f4exb
|
32539aaf2b
|
SDRdaemonSink: fixed basic UDP sending
|
2017-05-23 01:41:30 +02:00 |
|
f4exb
|
3df388ea8a
|
SDRdaemonSink: fixed center frequency and sample rate transmission to remote
|
2017-05-22 02:53:21 +02:00 |
|
f4exb
|
d3d8871b7c
|
SDRdaemonSink: control communication (1)
|
2017-05-22 00:04:54 +02:00 |
|
f4exb
|
3d691ab416
|
SDRdaemonSink: apply settings
|
2017-05-21 20:13:17 +02:00 |
|
f4exb
|
e14d0179c5
|
SDRdaemonSink: updated GUI
|
2017-05-21 19:45:56 +02:00 |
|
f4exb
|
a26c6a6436
|
SDRdaemonSink: added the plugin class
|
2017-05-21 13:34:37 +02:00 |
|
f4exb
|
c762359649
|
SDRdaemonSink: added the output class and GUI with the build
|
2017-05-21 13:32:56 +02:00 |
|
f4exb
|
20d1ff5dda
|
SDRdaemonSink: added the output class but not in the build yet
|
2017-05-21 12:58:57 +02:00 |
|
f4exb
|
edc0c3d47c
|
SDRdaemonSink: added the thread worker class
|
2017-05-21 04:41:47 +02:00 |
|
f4exb
|
8b703a1302
|
SDRdaemonSink: added UDPSinkFEC class
|
2017-05-21 04:19:12 +02:00 |
|
f4exb
|
e946242fae
|
Updated documentation
|
2017-05-19 10:52:18 +02:00 |
|
f4exb
|
9d9aa64439
|
LimeSDR output: updated documentation
|
2017-05-18 21:30:40 +02:00 |
|
f4exb
|
d842b44c28
|
Value dials: implement Ctl to shift digits by 2. Updated documentation
|
2017-05-18 01:48:52 +02:00 |
|
f4exb
|
dafad384c8
|
Merged Sigysmund changes for Mac OS Sierra on v3.4.5
|
2017-05-16 23:01:44 +02:00 |
|
f4exb
|
bb849623bd
|
updated value dials with Windows compatible font and pointing hand
|
2017-05-16 22:35:44 +02:00 |
|
f4exb
|
396baa22c8
|
New value dial color schemes: new yellow color scheme for filters. Use it in LimeSDR plugins
|
2017-05-16 21:24:25 +02:00 |
|
f4exb
|
5a96b78454
|
File plugins and Channel analyzer NG: fixed thumbwheels so that they appear correctly in Windows version
|
2017-05-16 18:48:27 +02:00 |
|
f4exb
|
007ea19e36
|
Bumped version to 3.5.0
|
2017-05-16 18:38:39 +02:00 |
|
f4exb
|
6f9ef0eaf9
|
New value dial color schemes: propagate to all active plugins
|
2017-05-16 18:27:36 +02:00 |
|
f4exb
|
747f400a78
|
New value dial color schemes. apply to File and AM demod plugins
|
2017-05-16 16:21:59 +02:00 |
|
f4exb
|
ebe681fafe
|
SDRdaemonSink: GUI form
|
2017-05-15 23:51:50 +02:00 |
|
f4exb
|
ae97f6414b
|
SDRdaemonSink: (2)
|
2017-05-15 13:59:56 +02:00 |
|
f4exb
|
dec0dbeb4c
|
SDRdaemonSink: Windows build (1)
|
2017-05-15 13:47:57 +02:00 |
|
ZigaS
|
27aab58d92
|
MacOS(sierra) development environment.
Updated qmake project configs.
Deploy & Run script.
For now only hardware supported is HackRF.
|
2017-05-15 12:32:16 +02:00 |
|
f4exb
|
76267d35b7
|
LimeSDR output: updated documentation
|
2017-05-15 02:11:27 +02:00 |
|
f4exb
|
497ae3651e
|
SDRdaemonSink plugin (1)
|
2017-05-15 00:58:56 +02:00 |
|
f4exb
|
7c5da2e84d
|
LimeSDR: updated documentation
|
2017-05-13 18:09:30 +02:00 |
|
f4exb
|
72b1bb8ac5
|
LimeSDR output: force apply settings on start
|
2017-05-13 14:36:44 +02:00 |
|
f4exb
|
225f25b9f4
|
LimeSDR: set NCO button appropriately
|
2017-05-12 03:31:42 +02:00 |
|
f4exb
|
428d4d6b75
|
LimeSDR Windows build: build plugins
|
2017-05-09 12:16:09 +02:00 |
|
f4exb
|
ac7b5a9e6f
|
LimeSDR support: built-in LimeSuite for Debian: updated documentation
|
2017-05-09 04:26:51 +02:00 |
|
f4exb
|
8a364d36c9
|
LimeSDR support: built-in LimeSuite for Debian - added dependent include subdirectories
|
2017-05-09 03:46:43 +02:00 |
|
f4exb
|
b5f70bd7f6
|
LimeSDR support: built-in LimeSuite for Debian - use internal LimeSutie in plugins
|
2017-05-09 03:30:26 +02:00 |
|
f4exb
|
101de1bdee
|
LimeSDR: updated documentation telling that the plugins are not available in binary packages
|
2017-05-09 01:20:37 +02:00 |
|
f4exb
|
5163fcd96b
|
Removed LimeSDR support from Debian build if LimeSuite is not found
|
2017-05-09 01:15:58 +02:00 |
|
f4exb
|
10cbfb3b44
|
LimeSDR: added soft decimation/interpolation by 64
|
2017-05-08 17:30:08 +02:00 |
|
f4exb
|
a159e72e20
|
LimeSDR: updated documentation
|
2017-05-08 11:59:30 +02:00 |
|
f4exb
|
a538fadb0c
|
LimeSDR: do not perform calibration in some cases
|
2017-05-08 11:02:31 +02:00 |
|
f4exb
|
140d12138a
|
LimeSDR output: set default gain to 4 db
|
2017-05-08 04:35:49 +02:00 |
|
f4exb
|
6f884d02c2
|
LimeSDR output: fixed send stream timeout (set to 1s)
|
2017-05-08 04:35:29 +02:00 |
|
f4exb
|
5c8b7fd606
|
LimeSDR output: implemented antenna select
|
2017-05-07 03:05:29 +02:00 |
|
f4exb
|
cf267b1254
|
Code warnings in Eclipse cleanup
|
2017-05-05 10:40:45 +02:00 |
|
f4exb
|
4818e629de
|
Bumped version to 3.4.1
|
2017-04-26 18:43:13 +02:00 |
|
f4exb
|
56582ab2b2
|
HackRF: rationalize start/stop device. Needs latest version of libhackrf (2017/03/01) and 2017.02.1 firmware
|
2017-04-26 16:35:05 +02:00 |
|
f4exb
|
54aa3ae27e
|
LimeSDR output: documentation
|
2017-04-24 17:51:07 +02:00 |
|
f4exb
|
5a588c6c63
|
LimeSDR output: optimize stream for max throughput
|
2017-04-24 09:56:52 +02:00 |
|
f4exb
|
d1e16b6ab0
|
LimeSDR output: regulate Tx output
|
2017-04-24 03:12:02 +02:00 |
|
f4exb
|
79515407e1
|
LimeSDR output: set LPF default BW to 5.5 MHz
|
2017-04-23 10:30:56 +02:00 |
|
f4exb
|
465b073d77
|
LimeSDR: suspend/resume all buddies threads before/after open/close
|
2017-04-23 04:01:00 +02:00 |
|
f4exb
|
2369cb62af
|
LimeSDR output: handle cross allocation from Rx properly
|
2017-04-23 03:44:19 +02:00 |
|
f4exb
|
7ad6533b1f
|
LimeSDR: fixed reporting sample rate to buddies
|
2017-04-23 03:36:10 +02:00 |
|
f4exb
|
5556e65503
|
LimeSDR: corrected center frequency reporting
|
2017-04-23 02:50:19 +02:00 |
|
f4exb
|
098f8d8af2
|
LimeSDR output: debug (1)
|
2017-04-22 12:08:15 +02:00 |
|
f4exb
|
a2294df9ab
|
LimeSDR output: register as sink and not source
|
2017-04-22 11:52:02 +02:00 |
|
f4exb
|
69a746c816
|
LimeSDR output: added missing sources
|
2017-04-22 11:41:44 +02:00 |
|
f4exb
|
e07a730c4f
|
LimeSDR output: compilation succesful
|
2017-04-22 11:33:41 +02:00 |
|
f4exb
|
9f4eeda7c9
|
LimeSDR output: implemented common thread interface for input and output plugins to be able to start/stop thread from each other
|
2017-04-22 10:45:33 +02:00 |
|
f4exb
|
f447c9f9bd
|
LimeSDR output (1)
|
2017-04-22 06:40:12 +02:00 |
|
f4exb
|
0013ab89ea
|
Bugfix: make sure device is not open when attempting to closing it
|
2017-04-17 12:00:13 +02:00 |
|
f4exb
|
414a7ccd87
|
Refactoring: removed device parameter from all start() methods in sample sink plugins
|
2017-04-14 03:44:49 +02:00 |
|
f4exb
|
00cf437bf2
|
HackRF: changed placement of input object creation in the GUI
|
2017-04-14 02:16:04 +02:00 |
|
f4exb
|
0a29f34b94
|
HackRF: open device by serial number
|
2017-04-14 02:09:36 +02:00 |
|
f4exb
|
01b2c42a5f
|
BladeRF: open device by serial number
|
2017-04-14 01:59:09 +02:00 |
|
f4exb
|
651303e860
|
HackRF: Rx/Tx opem/close new style corrections
|
2017-04-14 01:49:48 +02:00 |
|
f4exb
|
dea2764811
|
HackRF: Rx/Tx opem/close new style
|
2017-04-14 01:41:02 +02:00 |
|
f4exb
|
afaf3428f5
|
BladeRF: Rx/Tx opem/close new style
|
2017-04-13 23:40:14 +02:00 |
|
f4exb
|
72a2fd9065
|
BladeRF output: refactoring: device open close moved in the constructor and destructor respectively of the input object
|
2017-04-13 21:26:36 +02:00 |
|
f4exb
|
e71e75126e
|
BladeRF output: changed placement of input object creation in the GUI
|
2017-04-13 20:34:14 +02:00 |
|
f4exb
|
3ab855c927
|
Sample sink plugins: removed useless init pure virtual method
|
2017-04-12 23:26:40 +02:00 |
|
f4exb
|
b17e999bc2
|
Updated plugins version
|
2017-04-09 20:35:53 +02:00 |
|
f4exb
|
a2157a224f
|
Continuous sample rate setting: updated related plugins documentation
|
2017-04-09 20:30:01 +02:00 |
|
f4exb
|
37952c9562
|
File sink plugin: ensure minimum width
|
2017-04-09 20:29:24 +02:00 |
|
f4exb
|
d301bd9ebd
|
File Sink output: fixed debug message
|
2017-04-06 20:13:31 +02:00 |
|
f4exb
|
73c9340e4e
|
File Sink: implemented arbitrary sample rate selection
|
2017-04-06 19:19:32 +02:00 |
|
f4exb
|
7dfa4cdc6b
|
HackRF output: continuous sample rate setting
|
2017-04-02 04:34:58 +02:00 |
|
f4exb
|
c9f871f882
|
HackRF output: GUI updates
|
2017-04-02 04:04:05 +02:00 |
|
f4exb
|
365154767a
|
RTLSDR plugin: continuous sample rate setting
|
2017-04-02 02:00:05 +02:00 |
|
f4exb
|
f91eba5b10
|
HackRF output: continuous sample rate setting
|
2017-04-02 00:23:02 +02:00 |
|
f4exb
|
43d40a4ace
|
ATV Modulator: PAL-M (525l) effective support
|
2017-03-12 21:41:01 +01:00 |
|
f4exb
|
870f44a51b
|
File Sink: added more sample rates
|
2017-03-09 19:07:07 +01:00 |
|
f4exb
|
7b9dfb0446
|
BladeRF support: make sample rate precision to the sample/s and added 4.333 MS/s for GSM
|
2017-02-18 11:55:19 +01:00 |
|
f4exb
|
f7d7551d01
|
HackRF support: changed sample rates to sample precision
|
2017-02-18 11:21:12 +01:00 |
|
f4exb
|
5c4078d672
|
HackRF and BladeRF output plugins documentation cosmetic changes
|
2017-01-11 19:49:32 +01:00 |
|
f4exb
|
201695bb67
|
HackRF plugins: correct start/stop sequences
|
2017-01-11 01:21:22 +01:00 |
|
f4exb
|
e405f151e0
|
HackRF Output: limit size of sample FIFO to limit delay
|
2017-01-10 01:02:28 +01:00 |
|
f4exb
|
e4852230ea
|
BladeRF Output: limit size of sample FIFO to limit delay
|
2017-01-09 22:33:58 +01:00 |
|
f4exb
|
52e5d9a5d9
|
BladeRF and HackRF output plugins: updated documentation
|
2017-01-09 03:08:28 +01:00 |
|
f4exb
|
f264e01ca4
|
BladeRF and HackRF output plugins: added interpolation factors 4,8,16,32
|
2017-01-09 02:55:21 +01:00 |
|
f4exb
|
8c32ed4a12
|
Windows build: added BladeRF and HackRF output plugins. Added missing .pro files
|
2017-01-09 02:54:09 +01:00 |
|
f4exb
|
c10e2a1683
|
HackRF output plugin: restored Debian build
|
2017-01-09 00:52:29 +01:00 |
|
f4exb
|
17eafc64f7
|
HackRF output plugin: documentation
|
2017-01-09 00:51:08 +01:00 |
|
f4exb
|
47f7dc7962
|
HackRF output plugin: correct play/stop button colors
|
2017-01-09 00:28:14 +01:00 |
|
f4exb
|
61e45297df
|
HackRF plugins: shorten wait time in running loop so that start/stop can react faster (delay set to 200ms instead of 1s)
|
2017-01-09 00:08:33 +01:00 |
|
f4exb
|
932dde48ca
|
HackRF output plugin: fixed audio input
|
2017-01-08 23:48:01 +01:00 |
|
f4exb
|
f386fc86cb
|
HackRF output plugin: resize sample FIFO to 500ms
|
2017-01-08 22:30:11 +01:00 |
|
f4exb
|
9fd35cfe5c
|
HackRF output plugin: code cleanup
|
2017-01-08 17:39:02 +01:00 |
|
f4exb
|
095b1cbab1
|
HackRF output plugin: fixed Tx output power setting
|
2017-01-08 17:15:36 +01:00 |
|
f4exb
|
64246c5c6a
|
HackRF output plugin: corrected sample size
|
2017-01-08 13:04:06 +01:00 |
|
f4exb
|
212a8ad2f9
|
HackRF input plugin: pass thread pointer in the callback instead of using a static variable
|
2017-01-08 10:44:38 +01:00 |
|
f4exb
|
5d51fde9f7
|
Dismiss HackRF output plugin
|
2017-01-08 10:27:57 +01:00 |
|
f4exb
|
85ed39c767
|
HackRF output plugin: compiles
|
2017-01-08 04:13:20 +01:00 |
|
f4exb
|
1187ab99cb
|
Removed BladeRF output plugin from Windows build due to performance reasons
|
2017-01-07 11:05:07 +01:00 |
|
f4exb
|
0c58ba5e01
|
BladeRF output plugin: corrected baseband samplerate display placeholder size
|
2017-01-07 06:51:32 +01:00 |
|
f4exb
|
d29ee51ceb
|
BladeRF output: fixed audio input
|
2017-01-05 21:24:32 +01:00 |
|
f4exb
|
1f4451cf0b
|
Fixed Windows build for v3.0.0
|
2017-01-05 18:26:30 +01:00 |
|
f4exb
|
b626cf67e6
|
Updated main readme and some Tx plugins readme corrections
|
2017-01-05 04:01:23 +01:00 |
|
f4exb
|
ed769006c2
|
Added documentation on BladeRF input and output plugins and File Sink plugin
|
2017-01-04 23:14:28 +01:00 |
|
f4exb
|
a4f286835d
|
Tx supoort: removed file record option. Unify play button status colors
|
2017-01-04 21:11:51 +01:00 |
|
f4exb
|
9b72a3c064
|
FileSink plugin: fixed possible segfault
|
2017-01-03 23:22:06 +01:00 |
|