Sebastian Weiss
af2cb5462c
implement networked PlutoSDR
2019-03-02 17:47:00 +01:00
Robin Getz
95edff4985
plutosdr: grab the RF bandwidth range from the device
...
This will use the RF bandwidth from the device, which is different
between AD9363 and AD9364.
Things are now managed like the device likes - analog low pass bandwidth
is RF (complex) bandwidth, not baseband single I or Q bandwidth.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2019-02-01 16:42:08 -05:00
f4exb
b5a7425f1e
PlutoSDR: some minor changes to pull request #269 (Get LO range from device) and get Tx LO range also from device
2019-01-04 11:23:54 +01:00
Robin Getz
333273b3cb
pluto: Get LO range from device
...
When updating firmware, the devices which have AD9364s on them, get
reset to the default of a AD9363 (tuning range of 325 to 3800 MHz).
SDRAngel assumes a AD9364, and the GUI allows you to set LO settings
that the firmware doesn't support.
This ensures that does not happen, by going out to the hardware, and
querying the device to set the min/max limits on LO.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2019-01-03 12:46:40 -05:00
f4exb
4a69a7d39f
Adaptation of cmake files to MSVC
2018-12-02 03:06:04 +01:00
f4exb
f96978d196
Windows MSVC2017: PlutoSDR support
2018-11-28 18:30:11 +01:00
f4exb
72e29fd3f8
Moved export.h file to root of exports directory and removed util
2018-03-20 13:49:21 +01:00
f4exb
28e9df5fe8
Clang clean compile
2018-03-04 01:47:51 +01:00
f4exb
c22d146376
Adapt to MSVC linker
2018-03-03 20:23:38 +01:00
f4exb
2b846f5d28
PVS-Studio static analysis corrections (2) issue #137
2018-02-22 03:04:42 +01:00
f4exb
f01b90094b
PVS-Studio static analysis corrections (1) issue #137
2018-02-21 18:54:59 +01:00
f4exb
2ddcb8c358
Differentiate Rx and Tx DSP sample sizes
2018-01-22 08:46:05 +01:00
f4exb
491b8a6d33
Replaced hardcoded bit scaling literals by defines
2018-01-21 10:57:04 +01:00
f4exb
d110a3749d
Moved logger to QtApplication level. Corrections to some messages
2017-11-11 11:11:44 +01:00
f4exb
4536680adf
PlutoSDR device handling: fixed Tx channels
2017-10-29 03:01:44 +01:00
f4exb
e87ee16302
PlutoSDR input: display actual gain value returned from device
2017-10-09 02:18:04 +02:00
f4exb
ca48070c84
PlutoSDR: print error string from libiio in console message
2017-10-09 00:12:15 +02:00
f4exb
9ba88b396b
PlutoSDR: remove from device enumeration if device is not accessible (allocate context fails)
2017-09-23 03:42:58 +02:00
f4exb
d1061a3c2f
LimeSDR: Rx/Tx interaction
2017-09-20 18:25:54 +02:00
f4exb
73d9cfec6e
PlutoSDR: added message to send to other buddy for synchronization
2017-09-20 08:43:44 +02:00
f4exb
e4c1892930
PlutoSDR: clear the device scan list before (re)scanning
2017-09-19 23:11:03 +02:00
f4exb
c2b7092026
PlutoSDR output: interim state (2)
2017-09-19 08:33:26 +02:00
f4exb
f30b049546
PlutoSDR: FIR filter calculation: allow normalized BW down to 0.05 and use Hamming window below 0.2
2017-09-12 18:49:12 +02:00
f4exb
629fc9ce79
PlutoSDR input: restore full range of FIR Rx gain
2017-09-11 23:51:58 +02:00
f4exb
99b1070b3d
PlutoSDR input Debian build: fixed devices/plutosdr cmake file
2017-09-11 10:54:24 +02:00
f4exb
a088f2d30e
PlutoSDR input: set FIR bandwidth limits and sample rate limits dynamically
2017-09-10 19:37:23 +02:00
f4exb
d5d769d8d7
PlutoSDR input: restored FIR filter controls
2017-09-10 18:35:38 +02:00
f4exb
924eddd3b8
PlutoSDR input: restored LO ppm correction
2017-09-10 17:18:08 +02:00
f4exb
251fcd202d
PlutoSDR input: restored soft decimation
2017-09-10 17:07:38 +02:00
f4exb
ccb1563299
PlutoSDR input: corrected I/Q loop processing as interleaved and not I/Q sample block
2017-09-10 16:58:48 +02:00
f4exb
97c137197b
PlutoSDR: reset sample rate setting via strings. Enable IQ, BB DC and RF DC tracking by default at device open
2017-09-10 12:07:54 +02:00
f4exb
b16a1ff932
PlutoSDR: changed set sample rate method to use write long long
2017-09-10 10:46:59 +02:00
f4exb
04d06085fe
PlutoSDR: debug (3)
2017-09-10 10:16:23 +02:00
f4exb
ceb304cb9f
Downgraded to version 3.6.2
2017-09-09 15:34:04 +02:00
f4exb
f38e7704ad
PlutoSDR input: debug (2)
2017-09-09 10:44:42 +02:00
f4exb
aa047c77cc
PluoSDR: debug (1)
2017-09-09 03:09:17 +02:00
f4exb
868cac90f0
PlutoSDR input: implemented the rest of apply settings
2017-09-07 23:27:24 +02:00
f4exb
e4d1aa121c
PlutoSDR: set FIR filter (3)
2017-09-07 22:24:09 +02:00
f4exb
11b657a841
PlutoSDR: set FIR filter (2)
2017-09-07 18:41:55 +02:00
f4exb
7acd2bb7ed
PlutoSDR: set FIR filter (1)
2017-09-07 08:49:22 +02:00
f4exb
5a05cf14bb
PlutoSDR input: implemented input class interim state (2)
2017-09-07 06:15:39 +02:00
f4exb
7b437e41ba
PlutoSDR input: implemented input class interim state (1)
2017-09-06 18:48:58 +02:00
f4exb
e1c3a66983
PlutoSDR input: added thread class
2017-09-06 06:15:38 +02:00
f4exb
a24236a300
LimeSDR input: GUI fixes
2017-09-05 23:51:03 +02:00
f4exb
6fa8b4ac87
PlutoSDR: added common parameters and shared structure
2017-09-05 16:23:10 +02:00
f4exb
8ab3ad3b63
PlutoSDR: added read param method to device box
2017-09-05 15:06:40 +02:00
f4exb
b411ba5420
PlutoSDR input: use constants for frequency limits
2017-09-05 14:11:25 +02:00
f4exb
a8b318de62
PlutoSDR: added PlutoSDR common device classes
2017-09-02 04:35:17 +02:00
f4exb
de88e305db
PlutoSDR: added PlutoSDRDevice and PlutoSDRScan common device classes
2017-09-02 04:21:41 +02:00
