GS232ControllerSettings:
  description: "GS-232 Controller settings"
  properties:
    azimuth:
      description: Target azimuth in degrees (0-450)
      type: number
      format: float
    elevation:
      description: Target elevation in degrees (0-180)
      type: number
      format: float
    serialPort:
      description: The serial port the GS-232 controller is connected to
      type: string
    baudRate:
      description: The baud rate to use for the serial connection to the GS-232 controller
      type: integer
    host:
      description: Hostname / IP address of computer running rotctld.
      type: string
    port:
      description: TCP port number rotctld is listening on.
      type: integer
    track:
      description: Track a target where azimuth and elevation are determined by another plugin (1 for yes, 0 for no)
      type: integer
    source:
      description: "Identifier of the channel or feature plugin providing azimuth and elevation (E.g. R0:0 ADSBDemod)"
      type: string
    azimuthOffset:
      description: Azimuth offset in degrees
      type: integer
    elevationOffset:
      description: Elevation offset in degrees
      type: integer
    azimuthMin:
      description: Minimum azimuth the controller will output
      type: integer
    azimuthMax:
      description: Maximum azimuth the controller will output
      type: integer
    elevationMin:
      description: Minimum elevation the controller will output
      type: integer
    elevationMax:
      description: Maximum elevation the controller will output
      type: integer
    tolerance:
      description: Tolerance in degrees
      type: number
      format: float
    protocol:
      description: (0 GS-232, 1 SPID rot2prog)
      type: integer
    title:
      type: string
    rgbColor:
      type: integer
    useReverseAPI:
      description: Synchronize with reverse API (1 for yes, 0 for no)
      type: integer
    reverseAPIAddress:
      type: string
    reverseAPIPort:
      type: integer
    reverseAPIFeatureSetIndex:
      type: integer
    reverseAPIFeatureIndex:
      type: integer

GS232ControllerReport:
  description: "GS-232 Controller report"
  properties:
    runningState:
      type: integer
      description: >
        Running state
          * 0 - not started
          * 1 - idle
          * 2 - running
          * 3 - error
    sources:
      description: Names of pipe sources
      type: array
      items:
        type: string
    serialPorts:
      description: Available serial ports
      type: array
      items:
        type: string
    targetAzimuth:
      desription: "Target azimuth in degrees (0-450)"
      type: number
      format: float
    targetElevation:
      description: "Target elevation in degrees (0-180)"
      type: number
      format: float
    currentAzimuth:
      desription: "Current azimuth in degrees (0-450)"
      type: number
      format: float
    currentElevation:
      description: "Current elevation in degrees (0-180)"
      type: number
      format: float
    onTarget:
      description: "Indicates whether the rotator is pointing at the current target within the set tolerance"
      type: integer

GS232ControllerActions:
  description: "GS-232 Controller actions"
  properties:
    run:
      type: integer
      description: >
        Set the plugin running state
          * 0 - idle
          * 1 - run