PacketModTXSettingsDialog 0 0 351 849 Liberation Sans 9 Packet TX Extra Settings AX.25 Protocol Settings AX.25 preamble flags Number of flags to be transmitted before the frame. This gives more time for a receiver to unmute. 1 1024 AX.25 postamble flags Number of flags to be transmitted after the frame. 1 1024 AX.25 control Value of control field in AX.25 frame. 0x 255 3 16 AX.25 PID Value of PID field in AX.25 frame. Use 0xf0 for no L3. 0x 255 240 16 Modulation Baud rate Baud rate (symbols per second). 100000 1200 Modulaton type. AFSK FSK Modulation RF BW limit LPF taps Number of taps in LPF for RF BW filter. 10000 AFSK Modulation Frequency of tone to generate for a mark (1). 24000 100 Mark frequency (Hz) Space frequency (Hz) Frequency of tone to generate for a space (0). 24000 100 FSK Modulation Enable raised cosine pulse shaping filter Raised cosine pulse shaping Roll-off of the filter 1.000000000000000 0.250000000000000 Number of symbols over which filter is applied 1 20 Filter rolloff (beta) Filter symbol span Scrambing Enabling scrambling. Scramble Polynomial Polynomial of the scrambler. The +1 is implicit. 0x 2147483647 67584 16 Power Ramping Ramp up bits Number of bits at start of frame during which output power is ramped up. Ramp down bits Number of bits at end of frame during which output power is ramped down. Ramp range (dB) Range in dB over which power is ramped up or down. E.g. a value of 60 causes power to be ramped from -60dB to 0dB. 120 Modulate during ramping. Modulate while ramping Debug Generate white noise as baseband signal. Generate BB noise Generate white noise as RF signal. Generate RF noise 0 0 Write baseband signal to a CSV file named packetmod.csv Write baseband to CSV Qt::Horizontal QDialogButtonBox::Cancel|QDialogButtonBox::Ok buttonBox accepted() PacketModTXSettingsDialog accept() 248 254 157 274 buttonBox rejected() PacketModTXSettingsDialog reject() 316 260 286 274