PacketModTXSettingsDialog
0
0
351
849
Liberation Sans
9
Packet TX Extra Settings
-
AX.25 Protocol Settings
-
AX.25 preamble flags
-
Number of flags to be transmitted before the frame. This gives more time for a receiver to unmute.
1
1024
-
AX.25 postamble flags
-
Number of flags to be transmitted after the frame.
1
1024
-
AX.25 control
-
Value of control field in AX.25 frame.
0x
255
3
16
-
AX.25 PID
-
Value of PID field in AX.25 frame. Use 0xf0 for no L3.
0x
255
240
16
-
Modulation
-
Baud rate
-
Baud rate (symbols per second).
100000
1200
-
Modulation type
-
AFSK
-
FSK
-
Modulation
-
RF BW limit LPF taps
-
Number of taps in LPF for RF BW filter.
10000
-
AFSK Modulation
-
Frequency of tone to generate for a mark (1).
24000
100
-
Mark frequency (Hz)
-
Space frequency (Hz)
-
Frequency of tone to generate for a space (0).
24000
100
-
FSK Modulation
-
Enable raised cosine pulse shaping filter
Raised cosine pulse shaping
-
Roll-off of the filter
1.000000000000000
0.250000000000000
-
Number of symbols over which filter is applied
1
20
-
Filter rolloff (beta)
-
Filter symbol span
-
Scrambing
-
Enabling scrambling.
Scramble
-
Polynomial
-
Polynomial of the scrambler. The +1 is implicit.
0x
2147483647
67584
16
-
Power Ramping
-
Ramp up bits
-
Number of bits at start of frame during which output power is ramped up.
-
Ramp down bits
-
Number of bits at end of frame during which output power is ramped down.
-
Ramp range (dB)
-
Range in dB over which power is ramped up or down. E.g. a value of 60 causes power to be ramped from -60dB to 0dB.
120
-
Modulate during ramping.
Modulate while ramping
-
Debug
-
Generate white noise as baseband signal.
Generate BB noise
-
Generate white noise as RF signal.
Generate RF noise
-
0
0
Write baseband signal to a CSV file named packetmod.csv
Write baseband to CSV
-
Qt::Horizontal
QDialogButtonBox::Cancel|QDialogButtonBox::Ok
buttonBox
accepted()
PacketModTXSettingsDialog
accept()
248
254
157
274
buttonBox
rejected()
PacketModTXSettingsDialog
reject()
316
260
286
274