sdrangel/sdrbase/resources/webapi/doc/swagger/include/LimeRFE.yaml

120 lines
3.6 KiB
YAML

LimeRFESettings:
description: LimeRFE
properties:
devicePath:
description: Path to the device serial interface (ex /dev/ttyUSB2)
type: string
rxChannels:
type: integer
description: >
Rx channels group (LimeRFEController::ChannelGroups):
* 0 - Wideband
* 1 - HAM
* 2 - cellular
rxWidebandChannel:
type: integer
description: >
Rx wideband channel selection (LimeRFEController::WidebandChannel)
* 0 - Low: 1 - 1000 MHz
* 1 - High: 1 - 4 GHz
rxHAMChannel:
type: integer
description: >
Rx HAM channel selection (LimeRFEController::HAMChannel)
* 0 - 30 MHz and lower
* 1 - 50 - 70 MHz
* 2 - 144 - 146 MHz
* 3 - 220 - 225 MHz
* 4 - 430 - 440 MHz
* 5 - 902 - 928 MHz
* 6 - 1240 - 1325 MHz
* 7 - 2300 - 2450 MHz
* 8 - 3300 - 3500 MHz
rxCellularChannel:
type: integer
description: >
Rx cellular channel selection (LimeRFEController::CellularChannel)
* 0 - Band 1: 1.92 - 1.98 GHz
* 1 - Band 2: 1.84 - 1.92 GHz
* 2 - Band 3: 1.71 - 1.79 GHz
* 3 - Band 7: 2.48 - 2.58 GHz
* 4 - Band 38: 2.56 - 2.63 GHz
rxPort:
type: integer
description: >
Rx port selected (LimeRFEController::RxPort)
* 0 - J3
* 1 - J5
attenuationFactor:
description: Rx attenuation factor. Attenuation is 2 times this factor in dB (0..7 => 0..14dB)
type: integer
amfmNotch:
desciption: Rx AM/FM notch filter (boolean)
type: integer
txChannels:
type: integer
description: >
Tx channels group (LimeRFEController::ChannelGroups)
* 0 - Wideband
* 1 - HAM
* 2 - cellular
txWidebandChannel:
type: integer
description: >
Tx wideband channel selection (LimeRFEController::WidebandChannel)
* 0 - Low: 1 - 1000 MHz
* 1 - High: 1 - 4 GHz
txHAMChannel:
type: integer
description: >
Tx HAM channel selection (LimeRFEController::HAMChannel)
* 0 - 30 MHz and lower
* 1 - 50 - 70 MHz
* 2 - 144 - 146 MHz
* 3 - 220 - 225 MHz
* 4 - 430 - 440 MHz
* 5 - 902 - 928 MHz
* 6 - 1240 - 1325 MHz
* 7 - 2300 - 2450 MHz
* 8 - 3300 - 3500 MHz
txCellularChannel:
type: integer
description: >
Tx cellular channel selection (LimeRFEController::CellularChannel)
* 0 - Band 1: 1.92 - 1.98 GHz
* 1 - Band 2: 1.84 - 1.92 GHz
* 2 - Band 3: 1.71 - 1.79 GHz
* 3 - Band 7: 2.48 - 2.58 GHz
* 4 - Band 38: 2.56 - 2.63 GHz
txPort:
type: integer
description: >
Tx port selected (LimeRFEController::TxPort)
* 0 - J3
* 1 - J4
* 2 - J5
swrEnable:
description: Boolean if SWR measurements are enabled else 0
type: integer
swrSource:
type: integer
description: >
SWR measurement source (LimeRFEController::SWRSource)
* 0 - External
* 1 - Cellular
rxOn:
description: Boolean 1 if Rx is active else 0
type: integer
txOn:
description: Boolean 1 if Tx is active else 0
type: integer
LimeRFEPower:
description: report of forward and reflected power measurements
properties:
forward:
description: relative forward power in centi-Bels
type: integer
reflected:
description: relative reflected power in centi-Bels
type: integer