======== SDRangel

SDRangel is a Qt5/OpenGL SDR frontend to various hardware

=================== Repository branches

• master: the "production" branch
• rtlsdrangelove: the master from hexameron rtl-sdrangelove
• legacy: the modified rtl-sdrangelove before major redeisign

================================================ Plugins unsupported but still in the source tree

• Channels:
  • tetra
• Sample sources:
  • gnuradio
  • osmosdr
  • v4l-msi
  • v4l-rtl

============== Funcube Dongle

Only the original Funcube Dongle Pro is supported. Funcube Dongle Pro+ will come later

======= BladeRF

A complete new plugin has been written for the BladeRF that interfaces libbladeRF directly. Osmosdr/GnuRadio interface is not implemented correctly and has a lot of bugs as mentioned previously and was not reasonably usable with the BladeRF.

If you use your own location for libbladeRF install directory you need to specify library and include locations. Example with opt/install/libbladerf with the following defines on cmake command line:

-DLIBBLADERF_LIBRARIES=/opt/install/libbladeRF/lib/libbladeRF.so -DLIBBLADERF_INCLUDE_DIR=/opt/install/libbladeRF/include

========== For Ubuntu

sudo apt-get install libqt5multimedia5-plugins qtmultimedia5-dev qttools5-dev qttools5-dev-tools libqt5opengl5-dev qtbase5-dev libusb-1.0 librtlsdr-dev libboost-all-dev

mkdir build && cd build && cmake ../ && make

librtlsdr-dev is in the universe repo. (utopic 14.10 amd64.)

Use cmake ../ -DV4L-RTL=ON to build the Linux kernel driver for RTL-SDR (Experimental). Needs a recent kernel and libv4l2. Will need extra work to support SDRPlay. Needs cp KERNEL_SOURCE/include/linux/compiler.h /usr/include/linux/ and cp KERNEL_SOURCE/include/uapi/linux/videodev2.h /usr/include/uapi/linux/ and package libv4l-dev.

The Gnuradio plugin source needs extra packages, including liblog4cpp-dev libboost-system-dev gnuradio-dev libosmosdr-dev

For non standard installations of RTL-SDR library, the GNU Radio runtime and gr.osmocom drivers use the following variables in the cmake command line. The paths specified are just examples:

• For GNU Radio runtime:
  • Includes: -DGNURADIO_RUNTIME_INCLUDE_DIRS=/opt/install/gnuradio-3.7.5.1/include
  • Library: -DGNURADIO_RUNTIME_LIBRARIES=/opt/install/gnuradio-3.7.5.1/lib/libgnuradio-runtime.so
• For gr.osmocom:
  • Includes: -DGNURADIO_OSMOSDR_INCLUDE_DIRS=/opt/install/gr-osmosdr/include
  • Library: -DGNURADIO_OSMOSDR_LIBRARIES=/opt/install/gr-osmosdr/lib/libgnuradio-osmosdr.so
• For RTL-SDR library:
  • Includes: -DLIBRTLSDR_INCLUDE_DIR=/opt/install/rtlsdr/include
  • Library: -DLIBRTLSDR_LIBRARIES=/opt/install/rtlsdr/lib/librtlsdr.so

There is no installation procedure the executable is at the root of the build directory

========== For Debian

For any version of Debian you will need Qt5.

Debian 7 "wheezy" uses Qt4. Qt5 is available from the "wheezy-backports" repo, but this will remove Qt4. Debian 8 "jessie" uses Qt5.

Assuming Debian Jessie is used:

sudo apt-get install cmake g++ pkg-config libfftw3-dev libusb-1.0-0-dev libusb-dev qt5-default qtbase5-dev qtchooser libqt5multimedia5-plugins qtmultimedia5-dev qttools5-dev qttools5-dev-tools libqt5opengl5-dev qtbase5-dev librtlsdr-dev libboost-all-dev

mkdir build && cd build && cmake ../ && make

Then the same remarks as for Ubuntu apply...

============ Known Issues

• You will need to stop input before changing preset then start again

======================== Changes from SDRangelove

• Added ppm correction for the LO of RTL-SDR. This uses the corresponding function in the librtlsdr interface (range -99..99 ppm)
• Added a preset update button (the diskette with the yellow corner) to be able to save the current settings on an existing preset
• Added variable decimation in log2 increments from 2^0=1 to 2^4=16 allowing to see the full 2048 kHz of spectrum if so you wish
• Better handling of rtlsdr GUI display when settings change (initial load, load of presets)
• Added display and precise control of the shift frequency from center frequency of the NFM receivers.
• Removed useless spectrum visualizer in NFM receivers. Created a null sink class to fit corresponding parameter in NFMDemod class constructor.
• Added display and precise control of the shift frequency from center frequency of the SSB receivers.
• SSB filter bounds are tunable so that filter can be set off from center frequency allowing aural decoding of CW
• Make the sidebands appear correctly on SSB channel overlay. Limit to +/- 6 kHz to fit channel spectrum analyzer window
• SSB bandwidth can now be tuned in steps of 100 Hz
• NFM and SSB receiver in focus trigger the display of the central frequency line on the spectrum frequency scale thus facilitating its identification
• Added AM demod so now you can listen to air traffic!
• Added the possibility to change the brightness and/or color of the grid.
• Make the low cutoff frequency of the SSB filter variable so it can be used for CW also.
• NFM demodulation without using atan and smooth squelch with AGC suppressing most clicks on low level signals and hiss on carrier tails. Only useful modulation comes through.
• Added working WFM demodulation. Optimized for no atan2.
• OsmoSDR and GNURadio plugins removed from the build as they have too many bugs that are too difficult to correct
• New plugin for BladeRF interfacing libbladeRF directly
• Corrected the nasty audio band resampling bug preventing use of sample rates that are not power of 2 multiples of 48kHz. This was because the resampling ratio was calculated with an integer division instead of a float division.
• As a consequence of the above added more interesting values for the available sampling rates of the BladeRF plugin
• Variable span for the SSB demod down to 1.5 kHz
• Filter out CTCSS tones for audio and full CTCSS support in NFMDemod
• Enhancement of the NFM squelch mimicking professional analog squelch circuits (based on balance between two AF filters)
• Added a channel analyzer plugin focusing on measurement (DSA/DSO functionnality). Basic functions.
• Added a scope widget in the channel analyzer plugin
• Channel analyzer bandwidth up to half the available RF (IF) bandwidth (was 48k fixed)
• Enhanced scope display and controls: scale display, better X (time) and Y scales control, grid fit to scale, effectively implementing triggers, trigger on magnitude and phase, properly handling time shift, ...
• Enhanced spectrum display: Histogram: wider decay range, make stroke and late holdoff adjustable. Added option to show live spectrum (had only max hold before).
• Enhanced channel analyzer: enhanced scope and spectrum displays as mentioned above, make the spectrum display synchronous to scope (hence triggerable a la E4406A).
• Sort channel plugins by delta frequency and type before saving to preset
• Implemented scope pre-trigger delay
• Implemented variable scope memory depth
• Implemented trigger delay
• Trigger on both edges
• Spectrum histogram clear
• Trigger line display for all trigger modes
• Coarse and fine trigger level sliders
• Minimalist recording (no file choice)
• File sample source plugin (recording reader) not working
• Major redesign:
  • Make the DSP engine global static
  • Fixed startup initialization sequence. New initialization phase in DSP engine and new ready state
  • Synchronous messaging class to push message to thread and wait for completion
  • Message queuing and handling redesign
  • Many other little things...

===== To Do

• Level calibration
• Enhance presets management (Edit, Move, Import/Export from/to human readable format like JSON)
• Tx channels for Rx/Tx boards like BladeRF
• Enhance WFM (stereo, RDS?)
• Even more demods ...