mirror of
https://github.com/f4exb/sdrangel.git
synced 2024-11-08 09:36:02 -05:00
135 lines
4.3 KiB
YAML
135 lines
4.3 KiB
YAML
APTDemodSettings:
|
|
description: APTDemod
|
|
properties:
|
|
inputFrequencyOffset:
|
|
description: Channel center frequency shift from baseband center in Hz
|
|
type: integer
|
|
format: int64
|
|
rfBandwidth:
|
|
description: Channel RF bandwidth in Hz
|
|
type: number
|
|
format: float
|
|
fmDeviation:
|
|
description: Frequency deviation in Hz
|
|
type: integer
|
|
cropNoise:
|
|
description: Crop noise from top and bottom of image
|
|
type: integer
|
|
denoise:
|
|
description: Apply denoise filter to image
|
|
type: integer
|
|
linearEqualise:
|
|
description: Apply linear equalisation to image
|
|
type: integer
|
|
histogramEqualise:
|
|
description: Apply histogram equalisation to image
|
|
type: integer
|
|
precipitationOverlay:
|
|
description: Create colour overlay of precipitation
|
|
type: integer
|
|
flip:
|
|
description: Flip image for South to North passes
|
|
type: integer
|
|
channels:
|
|
description: Which channel to display (0=both, 1=A, 2=B, 3=Temperature, 4+=palette)
|
|
type: integer
|
|
decodeEnabled:
|
|
description: Controls whether the decoder is enabled
|
|
type: integer
|
|
autoSave:
|
|
description: Automatically save images when acquisition is stopped
|
|
type: integer
|
|
autoSavePath:
|
|
description: Directory to automatically save images in
|
|
type: string
|
|
autoSaveMinScanLines:
|
|
description: Minimum number of scanlines (after cropping) for an image to be automatically saved
|
|
type: integer
|
|
saveCombined:
|
|
type: integer
|
|
description: Save image with channels A and B
|
|
saveSeparate:
|
|
description: Save channel A and B as separate image files
|
|
type: integer
|
|
saveProjection:
|
|
description: Save equidistant cylindrical projection of image
|
|
type: integer
|
|
scanlinesPerImageUpdate:
|
|
description: Interval in scanlines between image processing and projection
|
|
type: integer
|
|
transparencyThreshold:
|
|
description: Threshold below which pixels will be fully transparent (0-255)
|
|
type: integer
|
|
opacityThreshold:
|
|
description: Threshold above which pixels will be fully opaque (0-255)
|
|
type: integer
|
|
palettes:
|
|
description: "; separated list of 256x256 image files that can be used as colour maps"
|
|
type: string
|
|
palette:
|
|
description: "Index in to palletes. Used when channels=4"
|
|
type: integer
|
|
horizontalPixelsPerDegree:
|
|
description: "Horizontal pixels per degree longitude in projected image"
|
|
type: integer
|
|
verticalPixelsPerDegree:
|
|
description: "Vertical pixels per degree latitude in projected image"
|
|
type: integer
|
|
satTimeOffset:
|
|
description: "Time offset in seconds, for aligning image on map"
|
|
type: number
|
|
format: float
|
|
satYaw:
|
|
description: "Yaw angle offset in degrees, for aligning image on map"
|
|
type: number
|
|
format: float
|
|
rgbColor:
|
|
type: integer
|
|
title:
|
|
type: string
|
|
streamIndex:
|
|
description: MIMO channel. Not relevant when connected to SI (single Rx).
|
|
type: integer
|
|
useReverseAPI:
|
|
description: Synchronize with reverse API (1 for yes, 0 for no)
|
|
type: integer
|
|
reverseAPIAddress:
|
|
type: string
|
|
reverseAPIPort:
|
|
type: integer
|
|
reverseAPIDeviceIndex:
|
|
type: integer
|
|
reverseAPIChannelIndex:
|
|
type: integer
|
|
channelMarker:
|
|
$ref: "/doc/swagger/include/ChannelMarker.yaml#/ChannelMarker"
|
|
rollupState:
|
|
$ref: "/doc/swagger/include/RollupState.yaml#/RollupState"
|
|
|
|
APTDemodActions:
|
|
description: APTDemod
|
|
properties:
|
|
aos:
|
|
description: "Acquisition of signal"
|
|
type: object
|
|
properties:
|
|
satelliteName:
|
|
description: "Name of the satellite"
|
|
type: string
|
|
northToSouthPass:
|
|
description: "Satellite is passing from the North to the South (1) or South to North (0)"
|
|
type: integer
|
|
tle:
|
|
description: "Two line elements for satellite"
|
|
type: string
|
|
dateTime:
|
|
description: "Date and time of AOS (May differ from system clock when replaying old passes)"
|
|
type: string
|
|
los:
|
|
description: "Loss of signal"
|
|
type: object
|
|
properties:
|
|
satelliteName:
|
|
description: "Name of the satellite"
|
|
type: string
|