sdrangel/plugins/channeltx/modssb
f4exb 3cf0b044d7 Fixed audio FIFO read length 2016-12-26 11:16:12 +01:00
..
CMakeLists.txt SSB Modulator; compiles yet non functional 2016-12-12 00:48:27 +01:00
modssb.pro Windows build: added SSB Modulator and CW Keyer 2016-12-12 01:16:36 +01:00
readme.md Modulators: corrections in readme's 2016-12-19 13:09:13 +01:00
ssbmod.cpp Fixed audio FIFO read length 2016-12-26 11:16:12 +01:00
ssbmod.h All modulators: use buffer for input audio that is always in use while generation is running. This fixes lockup problem reported in issue #11 2016-12-26 01:39:34 +01:00
ssbmodgui.cpp SSB Modulator: implemented audio mute, binaural and flip channels 2016-12-14 13:52:46 +01:00
ssbmodgui.h SSB Modulator: implemented audio mute, binaural and flip channels 2016-12-14 13:52:46 +01:00
ssbmodgui.ui SSB Modulator: volume span 0.0 to 2.0 max 2016-12-18 07:37:56 +01:00
ssbmodplugin.cpp Bumped to version 2.5.2 2016-12-23 00:34:07 +01:00
ssbmodplugin.h SSB Modulator; compiles yet non functional 2016-12-12 00:48:27 +01:00

readme.md

SSB modulator plugin

Introduction

This plugin can be used to generate a single sideband or double sidebands modulated signal.

Interface

SSB Modulator plugin GUI

1: Frequency shift from center frequency of reception direction

The "+/-" button on the left side of the dial toggles between positive and negative shift.

2: Frequency shift from center frequency of reception value

Use the wheels to adjust the frequency shift in Hz from the center frequency of reception. Left click on a digit sets the cursor position at this digit. Right click on a digit sets all digits on the right to zero. This effectively floors value at the digit position.

3: Channel power

Average total power in dB relative to a +/- 1.0 amplitude signal generated in the pass band.

4: Binaural mode

Use this button to toggle between monaural and binaural mode. Monaural is classical single sideband or double sidebands modulation. In binaural mode I and Q samples are taken from the left and right stereo channels (or reversed).

When in monaural mode the icon shows a single loudspeaker and when in binaural mode it shows a pair of loudspeakers.

5: Reverse left and right channels in binaural mode

Effective only in binaural mode: reverses left and right audio channels so that the left is connected to Q and the right to the I complex signal channel.

6: SSB/DSB

Selects between SSB and DSB operation. When in SSB mode the icon shows a single sideband spectrum (USB side). When in DSB mode the icon shows a double sideband spectrum.

7: Spectrum display frequency span

The transmitted signal in the sideband (SSB) or sidebands (DSB) is further decimated by a power of two before being applied to the channel spectrum display. Thus the frequency span of the spectrum display is the audio sample rate (48 kHz) divided by the decimation factor.

8: Signal bandwidth

The modulating signal is bandpass filtered (SSB) or lowpass filtered (DSB) before being multiplied by the local oscillator NCO. This is the upper limit of the filter in absolute value.

When this limit is positive the signal is transmitted in the upper sideband (USB). When this limit is negative the signal is transmitted in the lower sideband (LSB).

9: Filter low frequency cutoff

In SSB mode this is the lower limit in absolute value of the modulating signal bandpass filter

10: Volume

This is the volume of the audio signal from 0.0 (mute) to 2.0 (maximum). It can be varied continuously in 0.1 steps using the dial button. The Loudspeaker button is the audio mute toggle.

11: Level meter in %

  • top bar (beige): average value
  • bottom bar (brown): instantaneous peak value
  • tip vertical bar (bright red): peak hold value

You should aim at keepimg the peak value below 100% using the volume control

12: Input source control

Modulator input source control GUI

12.1: Tone input select

Switches to the tone input. You must switch it off to make other inputs available.

12.2: Morse keyer input select

Switches to the Morse keyer input. You must switch it off to make other inputs available.

12.3: Tone frequency (kHz)

Adjusts the tone frequency from 0.1 to 2.5 kHz in 0.01 kHz steps

12.4: Audio input select

Switches to the audio input. You must switch it off to make other inputs available.

13: CW (Morse) text

Enter the text to be keyed when Morse input is active and in text mode

14: Clear CW text

Clears the CW (Morse) text

15: Morse keyer controls

Morse keyer control GUI

15.1: CW keying speed

Sets the CW speed in Words Per Minute (WPM). This is based on the word "PARIS" sent 5 times. For 5 WPM the dot length is 240 ms. In other terms the dot length is calculated as 1.2 / WPM seconds. The dot length is used as the base to compute other timings:

  • Element (dot or dash) silence separator: 1 dot length
  • Dash: 3 dot lengths
  • Character silence separator: 3 dot lengths
  • Word silence separator: 7 dot lengths

15.2: Dots keying

Switch this button to send dots continuously

15.3: Dashes keying

Switch this button to send dashes continuously

15.4: Text keying

Switch this button to send the text typed into the text box (13)

15.5: Text auto repeat

Switch this button to auto repeat the text keying

15.6: Text play/stop

Use this button to stop sending text. When resuming keying restarts at the start of text

16: Audio file path

The path to the selected audio file to be played or dots if unselected

17: Audio file play controls

Modulator audio file play control GUI

17.1: Audio file select

Opens a file dialog to select the audio file to be played. It must be mono 48 kHz 16LE raw format.

17.2: Audio file loop

Audio replay file at the end

17.3: Play/pause file play

Toggle play/pause file play. When paused the slider below (20) can be used to randomly set the position in the file when re-starting.

18: Play file current position

This is the current audio file play position in time units relative to the start

19: Play file length

This is the audio file play length in time units

20: Play file position slider

This slider can be used to randomly set the currennt position in the file when file play is in pause state (button 17.3)

21: Channel spectrum display

This is the channel spectrum display. Controls at the bottom of the panel are the same as with the central spectrum display.