Charles J. Cliffe
423b590d7c
Fix off-by-one error and missing modem bw defaults
2015-12-14 19:31:18 -05:00
Charles J. Cliffe
744db7ea98
half-band tuning multiplier missing bandwidth state check
2015-12-13 17:26:19 -05:00
Charles J. Cliffe
aa821c8860
Zoom transition improvements, fix a nasty visual data overflow
2015-12-13 16:07:28 -05:00
Charles J. Cliffe
be8cde6ce3
More zoom tweaks, fix half-band tuner step
2015-12-13 14:09:04 -05:00
Charles J. Cliffe
d448f6dfc4
Fix mis-aligned average buffers on view shift
2015-12-12 19:26:02 -05:00
Charles J. Cliffe
aa4478946f
Fix demod waterfall/spectrum
2015-12-12 17:38:17 -05:00
Charles J. Cliffe
0b03ed47d4
Remap mis-matched averaging buffers on resampler change
2015-12-12 17:28:17 -05:00
Charles J. Cliffe
e22e696a7d
SpectrumVisualProcessor fixes/tweaks
2015-12-11 22:58:58 -05:00
Charles J. Cliffe
8331b1e5b1
Fix modem pre-selection bandwidth defaults
2015-12-11 22:21:41 -05:00
Charles J. Cliffe
7038652141
Fix some waterfall zoom navigation mistakes
2015-12-11 19:57:40 -05:00
Charles J. Cliffe
fe25aaefdf
SpectrumVisualProcessor Zoom rework
...
- Offloads some zoom processing from liquid-dsp to FFTW
- Eliminates aliases crawling across during zoom
- Doubles internal FFT allowing some additional visual smoothing
- Reduces CPU usage while zoomed deeply
- Eliminates CPU spikes while zooming
2015-12-08 22:17:00 -05:00
Charles J. Cliffe
68f0a986ee
Missing support module detection / info popup
2015-12-07 22:05:31 -05:00
Charles J. Cliffe
4ca7444176
Fix naming in UI "Bandwidth"->"Sample Rate"
2015-12-07 21:02:47 -05:00
Charles J. Cliffe
904db013c7
Simple tuner half-band display patch
2015-12-07 20:19:03 -05:00
Charles J. Cliffe
571ccd3f48
Save/Load and persist SoapySDR device settings
2015-12-06 00:32:32 -05:00
Charles J. Cliffe
f91a508da6
Channelizer tweaks
2015-12-05 19:07:26 -05:00
Charles J. Cliffe
1eb84d6fa7
SDRPostThread cleanup
2015-12-05 18:52:36 -05:00
Charles J. Cliffe
cdc80b890b
Add ReBuffer buffer count warning, fix SDRPostThread off-by-one channel reset
2015-12-04 22:10:51 -05:00
Charles J. Cliffe
7d0c667f3e
MSVC temporary fix-up
2015-12-01 22:06:50 -05:00
Charles J. Cliffe
0f8065f48a
FSK tweaks, minimum bandwidth adjust
2015-12-01 00:59:11 -05:00
Charles J. Cliffe
76d69ffd78
Add GMSK, fix modem bandwidth logic, cleanup.
2015-11-30 21:58:54 -05:00
Charles J. Cliffe
ceb6d62089
X/Y scope fading tweak
2015-11-29 16:42:12 -05:00
Charles J. Cliffe
380a5e4c2e
Fix case where re-activation shows old mode dialog
2015-11-29 15:16:44 -05:00
Charles J. Cliffe
c303b68284
Basic X/Y scope plot while in digital mode
2015-11-29 13:35:12 -05:00
Charles J. Cliffe
7e4d173996
Basic console window for digital output
...
- Probably end up making this a single tabbed dialog but this works for
the moment
2015-11-28 23:03:07 -05:00
Charles J. Cliffe
cdddd5850f
Legacy session load tweak, modem type selection refresh fix
2015-11-27 00:16:13 -05:00
Charles J. Cliffe
eb7986e25f
Save/load modem settings, race fixes, legacy session support
2015-11-27 00:05:21 -05:00
Charles J. Cliffe
e68ab1e82f
Remember settings when toggling modem types
...
- Some additional race condition fixes for showing/hiding the modem
property grid
2015-11-26 22:06:29 -05:00
Charles J. Cliffe
4fa0cb7c67
Persist modem settings on new instances
2015-11-26 01:54:54 -05:00
Charles J. Cliffe
1fb5dc4236
Fix non-digital-lab build
2015-11-24 23:32:40 -05:00
Charles J. Cliffe
67edfab862
Show/Hide modem properties when available
2015-11-24 23:00:43 -05:00
Charles J. Cliffe
d14dfed063
FSK now appears somewhat functional (outputs symbols to console)
2015-11-24 00:20:17 -05:00
Charles J. Cliffe
6e74662518
Modem property grid settings now applying/working
...
- Still some races with initializing the grid on new demodulators
2015-11-23 22:39:39 -05:00
Charles J. Cliffe
abdb5d32d9
Modem instance setting read/write
2015-11-23 22:16:09 -05:00
Charles J. Cliffe
c5bccb4211
Modem property grid now shows interactive settings
...
- Not yet applied
2015-11-23 22:03:14 -05:00
Charles J. Cliffe
5303f329df
ModemProperties panel property grid init
2015-11-23 21:32:50 -05:00
Charles J. Cliffe
4af943791b
Modem can now trigger kit rebuild, add FSK test settings
2015-11-23 20:44:48 -05:00
Charles J. Cliffe
4a62eae096
Convert constellation code to ModemArgInfo settings
...
- Note: can’t set constellation yet until property grid is added
2015-11-23 20:03:47 -05:00
Charles J. Cliffe
de1264fe17
Copy SoapySDR::ArgInfo to bootstrap ModemArgInfo
2015-11-23 18:41:10 -05:00
Charles J. Cliffe
407abac8e8
Move minimum frequency check to modem checkSampleRate()
2015-11-22 23:38:26 -05:00
Charles J. Cliffe
7b301fadc1
Clean up some early prototype garbage..
2015-11-22 23:25:45 -05:00
Charles J. Cliffe
c0eca0b2f3
Allow modems to limit/control input rate
...
- Modems can now over-ride user rate input and lock/step as needed
- Separate digital code defs a bit more so it’s not required when
disabled
- Testing FSK based on @andresv ’s example at
https://github.com/jgaeddert/liquid-dsp/issues/9
2015-11-22 19:56:25 -05:00
Charles J. Cliffe
724808d9ff
Clean-up/fix squelch
2015-11-21 15:12:20 -05:00
Charles J. Cliffe
c503bb93da
whoops.. :)
2015-11-21 02:13:33 -05:00
Charles J. Cliffe
fb677d0ee2
Constructor init order warning fixes
2015-11-20 22:29:04 -05:00
Charles J. Cliffe
a55dcad8be
Remove unused demod buffer
2015-11-20 22:13:09 -05:00
Charles J. Cliffe
63ea642c88
Clean-up unused stereo states.
2015-11-20 21:55:37 -05:00
Charles J. Cliffe
703e281d76
Fix demodulator init race
2015-11-20 21:41:57 -05:00
Charles J. Cliffe
7e856988a2
Fix spectrum/waveform display when higher than audio rate
2015-11-20 20:46:25 -05:00
Charles J. Cliffe
af2710ff37
Ubuntu fixes
2015-11-20 19:32:53 -05:00
Charles J. Cliffe
c912601272
MSVC fixes
2015-11-20 19:05:08 -05:00
Charles J. Cliffe
cf5cefbf6c
fix non-lab build
2015-11-19 00:39:14 -05:00
Charles J. Cliffe
e9f8869312
Fix ModemASK cons init
2015-11-19 00:19:24 -05:00
Charles J. Cliffe
86270b3300
race/init fix; skip audio output on digital
2015-11-19 00:11:34 -05:00
Charles J. Cliffe
dfd7496175
digital modem wrap-up and re-connect
...
- Compiles but untested
2015-11-18 23:40:30 -05:00
Charles J. Cliffe
001f4ee23b
Add digital modem factories
2015-11-18 23:06:21 -05:00
Charles J. Cliffe
a6cb932ab9
ModemDigital cleanup
2015-11-18 23:01:56 -05:00
Charles J. Cliffe
f43abdddaf
updateDemodulatorCons() cleanup
2015-11-18 22:57:31 -05:00
Charles J. Cliffe
94f94fa7dc
modem init order fix
2015-11-18 21:33:52 -05:00
Charles J. Cliffe
d6ffb6edc2
Cleanup / implement digital modem demod code
2015-11-18 21:31:59 -05:00
Charles J. Cliffe
10aa9f86dd
Apply source formatting for demodulator thread
2015-11-18 21:13:04 -05:00
Charles J. Cliffe
ea005014ae
Refactor digital code, prepare for implementation
2015-11-18 21:09:51 -05:00
Charles J. Cliffe
bb62fd1999
Fix/add FMS as temporary FM-Stereo mode
2015-11-18 00:23:04 -05:00
Charles J. Cliffe
5f6b492478
Analog modems now somewhat functional
...
- Still major memory leaks.. :)
2015-11-17 23:23:23 -05:00
Charles J. Cliffe
f53e228849
Cleanup / finalize demod before initial testing
2015-11-17 21:49:02 -05:00
Charles J. Cliffe
62ca78141f
Analog chain mostly complete
2015-11-17 21:22:51 -05:00
Charles J. Cliffe
8ac4498db7
code cleanup
2015-11-17 20:47:00 -05:00
Charles J. Cliffe
31bf65259d
Worker thread demod spawn, abstract Modem
2015-11-17 20:20:12 -05:00
Charles J. Cliffe
39c42c2b82
Add modemkit to demod chain
2015-11-17 19:32:47 -05:00
Charles J. Cliffe
73ca52aee1
Convert demodulator type ids to strings for now
2015-11-17 18:57:42 -05:00
Charles J. Cliffe
e33b8952d4
Modem factory init
2015-11-17 00:21:17 -05:00
Charles J. Cliffe
a1a6a467e8
Modem, ModemKit and initial ModemAnalog refactor
2015-11-16 23:49:54 -05:00
Charles J. Cliffe
6b3467e5c8
Add ENABLE_DIGITAL_LAB def
2015-11-15 13:52:54 -05:00
Charles J. Cliffe
a96a3b2234
Merge branch 'master' into digital_lab
2015-11-15 12:23:59 -05:00
Charles J. Cliffe
538092d9a0
remove null pointer checks...
2015-11-12 19:07:31 -05:00
Charles J. Cliffe
df4270a760
Allow user-specified SoapySDR module path
2015-11-12 18:38:38 -05:00
Charles J. Cliffe
8f18c316de
Add "Local Net" section for discovered LAN devices
2015-11-11 00:16:26 -05:00
Charles J. Cliffe
80e0d7019f
Update digital_lab
2015-11-10 20:53:55 -05:00
Charles J. Cliffe
6cd82ea44f
Optional title suffix, prefer local to bundled modules default
2015-11-10 19:25:41 -05:00
Charles J. Cliffe
886425d83d
Fix close on OSX
2015-11-10 02:13:15 -05:00
Charles J. Cliffe
f94f285f62
MSVC / close menu fix
2015-11-09 23:27:56 -05:00
Charles J. Cliffe
f39a96022a
Add OSX SoapySDR module bundling support.
2015-11-08 16:45:06 -05:00
Charles J. Cliffe
5346bdd50d
SDR Device dialog property settings now functional
2015-11-04 02:04:52 -05:00
Charles J. Cliffe
efbdb2d69f
Settings menu now functional.
2015-11-03 23:44:35 -05:00
Charles J. Cliffe
97cf6c4b23
SDRThread read/write setting support
2015-11-03 21:06:22 -05:00
Charles J. Cliffe
c7ecc5f1f6
Settings now added to settings menu, not yet functional..
...
- Also possible re-ordering fix for scope visual crash I have
occasionally
2015-11-03 19:58:42 -05:00
Charles J. Cliffe
bcc5f8560f
Device dialog /w editable SoapySDR config -- not actually applied yet :)
2015-11-03 00:53:39 -05:00
Charles J. Cliffe
57f492dee6
merge soapysdr-support fixes
2015-11-02 21:20:58 -05:00
Charles J. Cliffe
0d928543d8
Fix for ubuntu menu update crash
2015-11-02 21:04:02 -05:00
Charles J. Cliffe
4ffa518dcc
Update appframe menus from appframe instead of app thread..
...
- Possible fix for Linux menu update crash
2015-11-02 19:27:34 -05:00
Charles J. Cliffe
e04ec9ef37
Remove built-in RTLSDR settings to prepare for replacements, Device form propgrid test
2015-11-02 19:02:45 -05:00
Charles J. Cliffe
7b48b4f69f
Fix arrow key input on windows
2015-11-01 16:12:22 -05:00
Charles J. Cliffe
ba067bcc24
Fix spectrum scale control in Windows
2015-11-01 12:41:13 -05:00
Charles J. Cliffe
8878a22bd2
re-enable module dc correct
2015-11-01 11:34:20 -05:00
Charles J. Cliffe
d0b0606050
Merge pull request #177 from cjcliffe/soapysdr-loadmodule
...
SoapySDR bundling support for windows
2015-11-01 11:32:03 -05:00
Charles J. Cliffe
ad233cbb04
Use single mutex lock instead of atomic arrays for gain
2015-10-31 13:35:13 -04:00
Charles J. Cliffe
058709b8a8
Balance some interactive UI elements to scale better
...
- Most notably the tuning bar wasn’t really usable before when reducing
the top area too much.
2015-10-30 19:46:29 -04:00
Charles J. Cliffe
388d948486
Prevent crash from disabling AGC before device is known
2015-10-30 19:29:56 -04:00
Charles J. Cliffe
a1b73403a7
Soapy bundle option; requires SoapySDR/loader_work
2015-10-29 22:22:10 -04:00
Charles J. Cliffe
798c558c09
Fix bad frequency jumps at zoomed freq <= 1/2 samplerate
2015-10-28 22:07:06 -04:00
Charles J. Cliffe
8c53bde031
Fix bad waterfall texture offset
...
Was offset by 1 pixel..
2015-10-27 17:35:42 -04:00
Charles J. Cliffe
7027e7bf0b
Missed crash fix for channelizer channel 0
2015-10-27 17:06:39 -04:00
Charles J. Cliffe
3fc6f9ad80
Several crash/bug fixes, uninitialized vars
2015-10-27 16:53:06 -04:00
Charles J. Cliffe
f7821400a1
Missing include
2015-10-27 12:18:26 -04:00
Charles J. Cliffe
ac93aa369b
Manual Gain Control :-)
...
- Disable AGC from settings menu
- Requires latest SoapySDRPlay gain commits for SDRPlay
2015-10-27 01:56:49 -04:00
Charles J. Cliffe
68d80bde9e
Shift + arrow up/down to adjust visual scale
2015-10-25 14:31:56 -04:00
Charles J. Cliffe
a6201ad3b5
Add split-view controls; tweak spectrum scale control
2015-10-25 14:09:59 -04:00
Charles J. Cliffe
11aa8e9b05
Right drag spectrum vertically to adjust scale
2015-10-25 00:07:01 -04:00
Charles J. Cliffe
b89d606af3
SoapySDR 0.4.0 updates
...
- Requires up-to-date SoapySDR 0.4.x and re-built modules
2015-10-23 02:53:51 -04:00
Charles J. Cliffe
8e29fd5a98
missed texture init check on drawPanelContents
2015-10-22 18:29:49 -04:00
Charles J. Cliffe
ea7520734c
Waterfall init re-ordering for gl context sanity
2015-10-22 18:21:47 -04:00
Charles J. Cliffe
e61caaf5a6
Possible null pointer calls, fix unnecessary context switches
2015-10-22 01:42:50 -04:00
Charles J. Cliffe
1e0489f974
Fix some possible threading issues with waterfall canvas
2015-10-22 01:12:51 -04:00
Charles J. Cliffe
5fd4ba8059
Some DC-Spike removal magic..
...
Pay no attention to the spike behind the curtain.. <*|:-)
2015-10-21 19:50:53 -04:00
Charles J. Cliffe
fcbe2723e6
Manual bandwidth input improvements
...
- Prevent out-of-range bandwidths
- Display device name and known min/max rate
2015-10-21 17:39:44 -04:00
Charles J. Cliffe
cd82ecb15b
Put the default sample rates back, might be causing bad init..
2015-10-21 16:56:32 -04:00
Charles J. Cliffe
0cad2f1cfa
Apparently something still needs this..
...
TODO: this
2015-10-21 00:35:06 -04:00
Charles J. Cliffe
d85c94ead0
Attempt best-match sample rate near "default"
...
- Fix hard-coded usage of DEFAULT_SAMPLE_RATE, now “suggested” rate
2015-10-20 23:57:54 -04:00
Charles J. Cliffe
091ce26ed6
Dynamic input rate menu values from SoapySDR
2015-10-20 23:00:10 -04:00
Charles J. Cliffe
71383b4cb6
Avoid extra locking if queue is empty
2015-10-20 18:32:49 -04:00
Charles J. Cliffe
b822704b0c
Tweak waterfall update mutex locking
2015-10-20 18:30:41 -04:00
Charles J. Cliffe
0af4de4e84
stream init order of operations fix
2015-10-20 01:54:20 -04:00
Charles J. Cliffe
6087588b3d
MSVC simplification, easier to use alternate libs
2015-10-19 23:02:50 -04:00
Charles J. Cliffe
73733eabfe
Update default sample rate
...
- Should fix startup for AirSpy
2015-10-18 14:18:26 -04:00
Charles J. Cliffe
c200048bf7
Reduce glTexSubImage2D calls
...
- far less texture update calls for high speed waterfall rates
2015-10-18 13:44:31 -04:00
Charles J. Cliffe
67c184262a
Minor tweaks and cleanup
...
- add functions to access SDRPostThread
2015-10-18 12:26:07 -04:00
Charles J. Cliffe
6ee51711db
Fix channel gap on upper edge of spectrum
2015-10-17 18:25:14 -04:00
Charles J. Cliffe
f1475fb9be
Move DC correction to channel 0, reduce demod vis CPU usage
...
- Demod vis now uses channelizer output instead of decimation
- DC correction now only applied to channel 0
2015-10-17 16:17:12 -04:00
Charles J. Cliffe
beccdf8c63
firpfbch2->firpfbch experiment
...
- My assumption about this not working correctly may be wrong, this
actually seems to work ok compared to firpfbch2
2015-10-16 18:40:40 -04:00
Charles J. Cliffe
a4dc4498fc
Add support for my experimental firpfbch2_crcf_set_channel_state
...
- Needs my fork of liquid-dsp at:
https://github.com/cjcliffe/liquid-dsp/tree/firpfbch_toggle_channels
2015-10-15 21:01:07 -04:00
Charles J. Cliffe
249e04e69c
Move DC blocking filter to SDRThread
...
- DC blocker + Channelizer too heavy together
2015-10-15 01:35:08 -04:00
Charles J. Cliffe
d8c048fecc
SDRPostThread cleanup/refactor
...
- Cache active demodulators and channel info instead of running the
whole list each time
2015-10-14 18:09:29 -04:00
Charles J. Cliffe
edd154296c
FIR Polyphase filterbank channelizer prototype implementation
...
- Can now handle several 200khz FM streams with SDRPlay at 8Mhz+ on my
old 2010 Macbook Pro :)
- Demod bandwidth max now limited to 400khz, temporary until alternate
path for high-bandwidth is available
2015-10-14 00:54:48 -04:00
jocover
1ec45e84d5
fix setCORR bug and more device names support
2015-10-11 15:46:16 +08:00
Charles J. Cliffe
2b08c5d248
Fixed and working with MSVC 32-bit
2015-10-10 01:13:48 -04:00
Charles J. Cliffe
b8cb4f9c9f
Fix for linux (and possibly windows) startup error
2015-10-09 19:42:52 -04:00
Charles J. Cliffe
207d61cd0c
Merge pull request #156 from cjcliffe/master
...
Two crash fixes from master branch
2015-10-09 12:58:44 -04:00
Eoin Mcloughlin
0b10a5b30c
Fix crash in AudioThread::setActive
...
If AudioThread::run() hasn't been called yet, we can dereference a null inputQueue
2015-10-07 20:18:29 +01:00
Eoin Mcloughlin
2a95d05631
Fix crash when rtlsdr_open fails
2015-10-07 20:17:38 +01:00
Charles J. Cliffe
dff879f233
Move deviceSelector init startup -> appframe
...
- Plus some minor static analysis fixes and missing atomic store() for
MSVC
2015-10-05 19:59:17 -04:00
Charles J. Cliffe
0df2439658
Make init asynchronous, support for SoapyRemote servers
...
- tested with 2xRTLSDR, SDRPlay + RTLSDR on Raspberry Pi
- parameters/info dialog portion currently hidden until it works
- remotes aren’t saved on exit yet
- can now start CubicSDR without devices (remote only mode)
- can’t currently refresh local or remote devices through UI
- can’t currently remove remotes through UI
2015-10-05 02:21:08 -04:00
Charles J. Cliffe
3bf0439c56
Integrate more soapy device params
...
- Check current sample/frequency ranges when switching devices to keep
them in bounds.
2015-10-04 19:55:52 -04:00
Charles J. Cliffe
bf9695ecd3
Separate SDR data thread and enumeration, device dialog
2015-10-04 16:07:14 -04:00
Charles J. Cliffe
4ce8bc1781
SDR Thread rework, async device init.
...
- Preparing for new device selection/configuration dialog.
2015-10-03 21:35:11 -04:00
Charles J. Cliffe
d7d1008d89
tweak buffer memory usage
2015-10-01 22:23:02 -04:00
Charles J. Cliffe
942a511fea
FFT data buffering tweaks, remove logging
2015-10-01 22:21:44 -04:00
Charles J. Cliffe
9d06fa77c7
Use hardware DC when available
...
- un-comment code in SoapySDRThread for remote testing…
2015-09-30 23:45:06 -04:00
Charles J. Cliffe
748bb39795
fix waterfall lock-up
2015-09-30 02:07:00 -04:00
Charles J. Cliffe
730d123e23
Waterfall data distributor optimization
...
- Reduce memory thrashing and cpu usage from unnecessary buffer
allocations and deallocations
2015-09-29 22:34:34 -04:00
Charles J. Cliffe
f7e9d805e3
Whoops, HackRF needs more than 16Mhz :)
2015-09-27 19:18:51 -04:00
