comicsansg/tncattach
1
0
Fork 0
mirror of https://github.com/markqvist/tncattach.git synced 2024-11-26 22:28:59 -05:00
Code Issues Projects Releases Wiki Activity

Updated readme

Browse Source
This commit is contained in:
Mark Qvist 2020-05-27 09:52:24 +02:00
parent fb9551ea25
commit 6bdf096f08
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -27,7 +27,7 @@ sudo make install
Using __tncattach__ is simple. Run the program from the command line, specifying which serial port the TNC is connected to, and the serial port baud-rate, and __tncattach__ takes care of the rest. In most cases, depending on what you intend to do, you probably want to use some of the options, though. See the examples section below for usage examples.
```sh
```
Usage: tncattach [OPTION...] port baudrate
Attach TNC devices as system network interfaces
@ -37,7 +37,7 @@ Attach TNC devices as system network interfaces
-i, --ipv4=IP_ADDRESS Configure an IPv4 address on interface
-m, --mtu=MTU Specify interface MTU
-n, --noipv6 Filter IPv6 traffic from reaching TNC
--noup Only create interface, do not bring it up
--noup Only create interface, don't bring it up
-v, --verbose Enable verbose output
-?, --help Give this help list
--usage Give a short usage message