davinci: nfc: Import configs
Change-Id: I965f7ec1069e0d9de161fbd9d909cf3d5ee2e6e9
This commit is contained in:
Arian
parent
646adbe60c
commit
8c75fd775c
126
configs/nfc/libnfc-nci.conf
Normal file
126
configs/nfc/libnfc-nci.conf
Normal file
@ -0,0 +1,126 @@
|
||||
########################## Start of libnfc-nci.conf ###########################
|
||||
###############################################################################
|
||||
# Application options
|
||||
NFC_DEBUG_ENABLED=1
|
||||
|
||||
###############################################################################
|
||||
# performance measurement
|
||||
# Change this setting to control how often USERIAL log the performance (throughput)
|
||||
# data on read/write/poll
|
||||
# defailt is to log performance dara for every 100 read or write
|
||||
#REPORT_PERFORMANCE_MEASURE=100
|
||||
|
||||
###############################################################################
|
||||
# File used for NFA storage
|
||||
NFA_STORAGE="/data/nfc"
|
||||
|
||||
###############################################################################
|
||||
# Configure the default NfcA/IsoDep techology and protocol route. Can be
|
||||
# either a secure element (e.g. 0xF4) or the host (0x00)
|
||||
#DEFAULT_ISODEP_ROUTE=0x00
|
||||
|
||||
###############################################################################
|
||||
## Default poll duration (in ms)
|
||||
## The defualt is 500ms if not set
|
||||
NFA_DM_DISC_DURATION_POLL=500
|
||||
|
||||
###############################################################################
|
||||
# Force UICC to only listen to the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
|
||||
UICC_LISTEN_TECH_MASK=0x07
|
||||
|
||||
###############################################################################
|
||||
# Force HOST listen feature enable or disable.
|
||||
# 0: Disable
|
||||
# 1: Enable
|
||||
HOST_LISTEN_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# When screen is turned off, specify the desired power state of the controller.
|
||||
# 0: power-off-sleep state; DEFAULT
|
||||
# 1: full-power state
|
||||
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
|
||||
SCREEN_OFF_POWER_STATE=1
|
||||
|
||||
###############################################################################
|
||||
# Force tag polling for the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
|
||||
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
|
||||
# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
|
||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
|
||||
#
|
||||
# Notable bits:
|
||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
|
||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
|
||||
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
|
||||
# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology active mode */
|
||||
POLLING_TECH_MASK=0x4F
|
||||
|
||||
###############################################################################
|
||||
# Force P2P to only listen for the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
|
||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
|
||||
#
|
||||
# Notable bits:
|
||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
|
||||
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
|
||||
P2P_LISTEN_TECH_MASK=0x45
|
||||
|
||||
###############################################################################
|
||||
PRESERVE_STORAGE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
|
||||
# The value is set to 3 by default as it assumes we will discover 0xF2,
|
||||
# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
|
||||
# so that the stack will not wait any longer than necessary.
|
||||
# Maximum EE supported number
|
||||
# NXP PN547C2 0x02
|
||||
# NXP PN65T 0x03
|
||||
# NXP PN548C2 0x02
|
||||
# NXP PN66T 0x03
|
||||
NFA_MAX_EE_SUPPORTED=0x03
|
||||
|
||||
##############################################################################
|
||||
# Deactivate notification wait time out in seconds used in ETSI Reader mode
|
||||
# 0 - Infinite wait
|
||||
NFA_DM_DISC_NTF_TIMEOUT=100
|
||||
|
||||
###############################################################################
|
||||
# AID_MATCHING constants
|
||||
# AID_MATCHING_EXACT_ONLY 0x00
|
||||
# AID_MATCHING_EXACT_OR_PREFIX 0x01
|
||||
# AID_MATCHING_PREFIX_ONLY 0x02
|
||||
#AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
|
||||
AID_MATCHING_MODE=0x03
|
||||
|
||||
###############################################################################
|
||||
# Preferred Secure Element for Technology based routing
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
NXP_PRFD_TECH_SE=0x01
|
||||
|
||||
################################################################################
|
||||
#Set bit to 1 , black list is enabled
|
||||
#Set bit to 0, to disable balcklist
|
||||
NFA_AID_BLOCK_ROUTE=0x01
|
||||
|
||||
################################################################################
|
||||
# Maximum WTX requests entertained by MW
|
||||
NXP_WM_MAX_WTX_COUNT=50
|
||||
|
||||
################################################################################
|
||||
#Set the default Felica T3T System Code :
|
||||
#This settings will be used when application does not set this parameter
|
||||
DEFAULT_SYS_CODE={FE:FF}
|
||||
|
||||
#########################################################################
|
||||
#Set NCI credit notification timeout value
|
||||
NXP_NCI_CREDIT_NTF_TIMEOUT=2
|
||||
434
configs/nfc/libnfc-nxp.conf
Normal file
434
configs/nfc/libnfc-nxp.conf
Normal file
@ -0,0 +1,434 @@
|
||||
#################### This file is used by NXP NFC NCI HAL #####################
|
||||
###############################################################################
|
||||
# Application options
|
||||
# Logging Levels
|
||||
# NXPLOG_DEFAULT_LOGLEVEL 0x01
|
||||
# ANDROID_LOG_DEBUG 0x03
|
||||
# ANDROID_LOG_WARN 0x02
|
||||
# ANDROID_LOG_ERROR 0x01
|
||||
# ANDROID_LOG_SILENT 0x00
|
||||
NXPLOG_EXTNS_LOGLEVEL=0x03
|
||||
NXPLOG_NCIHAL_LOGLEVEL=0x03
|
||||
NXPLOG_NCIX_LOGLEVEL=0x03
|
||||
NXPLOG_NCIR_LOGLEVEL=0x03
|
||||
NXPLOG_FWDNLD_LOGLEVEL=0x03
|
||||
NXPLOG_TML_LOGLEVEL=0x03
|
||||
NFC_DEBUG_ENABLED=1
|
||||
|
||||
###############################################################################
|
||||
# Nfc Device Node name
|
||||
NXP_NFC_DEV_NODE="/dev/nq-nci"
|
||||
|
||||
#################################################################################
|
||||
#VEN Toggle Config
|
||||
#Disable = 0x00
|
||||
#Enable = 0x01
|
||||
ENABLE_VEN_TOGGLE=0x00
|
||||
|
||||
###############################################################################
|
||||
# Extension for Mifare reader enable
|
||||
MIFARE_READER_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# File name for Firmware
|
||||
NXP_FW_NAME="libsn100u_fw.so"
|
||||
|
||||
###############################################################################
|
||||
# System clock source selection configuration
|
||||
#define CLK_SRC_XTAL 1
|
||||
#define CLK_SRC_PLL 2
|
||||
NXP_SYS_CLK_SRC_SEL=0x02
|
||||
|
||||
###############################################################################
|
||||
# System clock frequency selection configuration
|
||||
#define CLK_FREQ_13MHZ 1
|
||||
#define CLK_FREQ_19_2MHZ 2
|
||||
#define CLK_FREQ_24MHZ 3
|
||||
#define CLK_FREQ_26MHZ 4
|
||||
#define CLK_FREQ_38_4MHZ 5
|
||||
#define CLK_FREQ_52MHZ 6
|
||||
NXP_SYS_CLK_FREQ_SEL=0x02
|
||||
|
||||
###############################################################################
|
||||
# The timeout value to be used for clock request acknowledgment
|
||||
# min value = 0x01 to max = 0x06
|
||||
#NXP_SYS_CLOCK_TO_CFG=0x06
|
||||
|
||||
###############################################################################
|
||||
# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
|
||||
# min value = 0x01 to max = 0x1F
|
||||
NXP_CLOCK_REQ_DELAY=0x1F
|
||||
|
||||
###############################################################################
|
||||
# NXP proprietary settings
|
||||
NXP_ACT_PROP_EXTN={2F, 02, 00}
|
||||
|
||||
###############################################################################
|
||||
# NFC forum profile settings
|
||||
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
|
||||
|
||||
###############################################################################
|
||||
# NXP TVDD configurations settings
|
||||
# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
|
||||
# out of them only one can be configured at a time.
|
||||
#NXP_EXT_TVDD_CFG=0x02
|
||||
|
||||
###############################################################################
|
||||
#config1:SLALM, 3.3V for both RM and CM
|
||||
#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
|
||||
|
||||
###############################################################################
|
||||
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
|
||||
#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
|
||||
#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
|
||||
|
||||
###############################################################################
|
||||
# Core configuration rf field filter settings to enable set to 01 to disable set
|
||||
# to 00 last bit
|
||||
#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
|
||||
|
||||
###############################################################################
|
||||
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
|
||||
# to 0x00
|
||||
#NXP_I2C_FRAGMENTATION_ENABLED=0x00
|
||||
|
||||
###############################################################################
|
||||
#set autonomous mode
|
||||
# disable autonomous 0x00
|
||||
# enable autonomous 0x01
|
||||
NXP_CORE_SCRN_OFF_AUTONOMOUS_ENABLE=0x00
|
||||
|
||||
###############################################################################
|
||||
#Enable SWP full power mode when phone is power off
|
||||
#NXP_SWP_FULL_PWR_ON=0x00
|
||||
|
||||
################################################################################
|
||||
#This is used to configure UICC2 at boot time.
|
||||
# UICC2 0x03
|
||||
NXP_DEFAULT_UICC2_SELECT=0x03
|
||||
|
||||
###############################################################################
|
||||
# CE when Screen state is locked
|
||||
# This setting is for DEFAULT_AID_ROUTE,
|
||||
# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_CE_ROUTE_STRICT_DISABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
#Timeout in secs
|
||||
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the default AID route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
# UICC2 0x03
|
||||
DEFAULT_AID_ROUTE=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare Desfire route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
# UICC2 0x03
|
||||
DEFAULT_ISODEP_ROUTE=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare CLT route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
# UICC2 0x03
|
||||
DEFAULT_MIFARE_CLT_ROUTE=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the Felica CLT route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
# UICC2 0x03
|
||||
DEFAULT_FELICA_CLT_ROUTE=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the default AID Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen off unlock
|
||||
# bit pos 4 = Screen On lock
|
||||
# bit pos 5 = Screen Off lock
|
||||
DEFAULT_AID_PWR_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare Desfire Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen off unlock
|
||||
# bit pos 4 = Screen On lock
|
||||
# bit pos 5 = Screen Off lock
|
||||
DEFAULT_DESFIRE_PWR_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare CLT Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen off unlock
|
||||
# bit pos 4 = Screen On lock
|
||||
# bit pos 5 = Screen Off lock
|
||||
DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
#Set the Felica CLT Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen off unlock
|
||||
# bit pos 4 = Screen On lock
|
||||
# bit pos 5 = Screen Off lock
|
||||
DEFAULT_FELICA_CLT_PWR_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
#Set the default Felica T3T System Code OffHost route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
# UICC2 0x03
|
||||
DEFAULT_SYS_CODE_ROUTE=0x00
|
||||
|
||||
###############################################################################
|
||||
# AID Matching platform options
|
||||
# AID_MATCHING_L 0x01
|
||||
# AID_MATCHING_K 0x02
|
||||
#AID_MATCHING_PLATFORM=0x01
|
||||
|
||||
###############################################################################
|
||||
# eSE interface options
|
||||
# NFC 0x01
|
||||
# SPI 0x02
|
||||
NXP_P61_LS_DEFAULT_INTERFACE=0x02
|
||||
|
||||
###############################################################################
|
||||
#CHINA_TIANJIN_RF_SETTING
|
||||
#Enable 0x01
|
||||
#Disable 0x00
|
||||
#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
|
||||
|
||||
###############################################################################
|
||||
#SWP_SWITCH_TIMEOUT_SETTING
|
||||
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
|
||||
# Timeout in milliseconds, for example
|
||||
# No Timeout 0x00
|
||||
# 10 millisecond timeout 0x0A
|
||||
#NXP_SWP_SWITCH_TIMEOUT=0x0A
|
||||
|
||||
###############################################################################
|
||||
# Flashing Options Configurations
|
||||
# FLASH_UPPER_VERSION 0x01
|
||||
# FLASH_DIFFERENT_VERSION 0x02
|
||||
# FLASH_ALWAYS 0x03
|
||||
NXP_FLASH_CONFIG=0x02
|
||||
|
||||
###############################################################################
|
||||
# eSE interface options for JCOP Download
|
||||
# NFC 0x01
|
||||
# SPI 0x02
|
||||
NXP_P61_JCOP_DEFAULT_INTERFACE=0x02
|
||||
|
||||
###############################################################################
|
||||
# Option to perform LS update every boot
|
||||
# Enable 0x01
|
||||
# Disable 0x00
|
||||
NXP_LS_FORCE_UPDATE_REQUIRED=0x00
|
||||
|
||||
###############################################################################
|
||||
# Option to perform JCOP update every boot
|
||||
# Enable 0x01
|
||||
# Disable 0x00
|
||||
NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
|
||||
|
||||
###############################################################################
|
||||
# Bail out mode
|
||||
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
|
||||
# Set this parameter value to 1 if Android Beam is enabled, else set to 0.
|
||||
NFA_POLL_BAIL_OUT_MODE=0x00
|
||||
|
||||
###############################################################################
|
||||
# White list of Hosts
|
||||
# This values will be the Hosts(NFCEEs) in the HCI Network.
|
||||
DEVICE_HOST_WHITE_LIST={C0, 80}
|
||||
|
||||
###############################################################################
|
||||
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
|
||||
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
|
||||
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
|
||||
# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
|
||||
# command is sent waiting for rsp and ntf.
|
||||
PRESENCE_CHECK_ALGORITHM=2
|
||||
|
||||
###############################################################################
|
||||
# Enable/Disable checking default proto SE Id
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
|
||||
|
||||
###############################################################################
|
||||
# Vendor Specific Proprietary Protocol & Discovery Configuration
|
||||
# Set to 0xFF if unsupported
|
||||
# byte[0] NCI_PROTOCOL_18092_ACTIVE
|
||||
# byte[1] NCI_PROTOCOL_B_PRIME
|
||||
# byte[2] NCI_PROTOCOL_DUAL
|
||||
# byte[3] NCI_PROTOCOL_15693
|
||||
# byte[4] NCI_PROTOCOL_KOVIO
|
||||
# byte[5] NCI_PROTOCOL_MIFARE
|
||||
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
|
||||
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
|
||||
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
|
||||
NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
|
||||
|
||||
###############################################################################
|
||||
#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
|
||||
#Enable/Disable block number checks for china transit use case
|
||||
#Enable 0x01
|
||||
#Disable 0x00
|
||||
#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
|
||||
|
||||
###################################################################################################
|
||||
#This flags will enable different modes of Lx Debug based on bits of the Byte0 & Byte1
|
||||
#Byte 0:
|
||||
# |_________Bit Mask_______| Debug Mode
|
||||
# b7|b6|b5|b4|b3|b2|b1|b0|
|
||||
# | | |X | | | | | Enable L1 Events (ISO14443-4, ISO18092)
|
||||
# | | | |X | | | | Enable L2 Reader Events(ROW specific)
|
||||
# | | | | |X | | | Enable Felica SystemCode
|
||||
# | | | | | |X | | Enable Felica RF (all Felica CM events)
|
||||
# | | | | | | |X | Enable L2 Events Card Emulation (ISO14443-3, Modulation detected, RF Field ON/OFF)
|
||||
#Byte 1:
|
||||
# Enable RSSI 0x01 Byte1 Byte0
|
||||
# Disable RSSI 0x00 \__ __/
|
||||
# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0110 ==> L1 with RSSI
|
||||
#NXP_CORE_PROP_SYSTEM_DEBUG=0x11
|
||||
|
||||
###############################################################################
|
||||
#Enable NXP NCI runtime parser library
|
||||
#Enable 0x01
|
||||
#Disable 0x00
|
||||
NXP_NCI_PARSER_LIBRARY=0x00
|
||||
|
||||
###############################################################################
|
||||
# Timeout value in milliseconds for JCOP OS download to complete
|
||||
OS_DOWNLOAD_TIMEOUT_VALUE=60000
|
||||
|
||||
###############################################################################
|
||||
# Forcing HOST to listen for a selected protocol
|
||||
# 0x00 : Disable Host Listen
|
||||
# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A
|
||||
# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B
|
||||
# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F
|
||||
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
|
||||
HOST_LISTEN_TECH_MASK=0x07
|
||||
|
||||
###############################################################################
|
||||
# Enable forward functionality
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
FORWARD_FUNCTIONALITY_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Configure the NFC Extras to open and use a static pipe. If the value is
|
||||
# not set or set to 0, then the default is use a dynamic pipe based on a
|
||||
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
|
||||
# for each EE (ESE/SIM)
|
||||
OFF_HOST_ESE_PIPE_ID=0x16
|
||||
OFF_HOST_SIM_PIPE_ID=0x0A
|
||||
|
||||
###############################################################################
|
||||
#Set the Felica T3T System Code Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
#Update Power state as per NCI2.0
|
||||
DEFAULT_SYS_CODE_PWR_STATE=0x39
|
||||
|
||||
###############################################################################
|
||||
#Default Secure Element route id
|
||||
DEFAULT_OFFHOST_ROUTE=0x02
|
||||
|
||||
###############################################################################
|
||||
#Maximum SMB transceive wait for response
|
||||
NXP_SMB_TRANSCEIVE_TIMEOUT=2000
|
||||
|
||||
###############################################################################
|
||||
# Firmware file type
|
||||
#.so file 0x01
|
||||
#.bin file 0x02
|
||||
NXP_FW_TYPE=0x01
|
||||
|
||||
############################################################################
|
||||
# Extended APDU length for ISO_DEP
|
||||
ISO_DEP_MAX_TRANSCEIVE=0xFEFF
|
||||
|
||||
#########################################################################
|
||||
# Support for Amendment I SEMS specification
|
||||
# Support SEMS Amendment I 0x01
|
||||
# Support NXP LS client 0x00
|
||||
NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
|
||||
|
||||
#########################################################################
|
||||
# Enable/Disable default route to host in case default se is not active
|
||||
# Disable feature 0x00
|
||||
# Enable feature 0x01
|
||||
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
|
||||
|
||||
###############################################################################
|
||||
# Assign terminal number to each interface based on system config
|
||||
NXP_SPI_SE_TERMINAL_NUM="eSE1"
|
||||
NXP_NFC_SE_TERMINAL_NUM="eSE2"
|
||||
#NXP_VISO_SE_TERMINAL_NUM="eSE3"
|
||||
|
||||
###############################################################################
|
||||
#For static or dynamic dual UICC feature support
|
||||
#Enable static dual uicc feature by setting value 0x00
|
||||
#Enable dynamic dual uicc feature by setting value 0x01
|
||||
NXP_DUAL_UICC_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Time to wait by DH when NFCC will report eSE Cold Temp Error.
|
||||
# The value is as per the UM and in seconds
|
||||
NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
|
||||
|
||||
###############################################################################
|
||||
# Set configuration optimization decision setting
|
||||
# Enable = 0x01
|
||||
# Disable = 0x00
|
||||
NXP_SET_CONFIG_ALWAYS=0x01
|
||||
###############################################################################
|
||||
#OffHost ESE route location for MultiSE
|
||||
#ESE = 01
|
||||
OFFHOST_ROUTE_ESE={01}
|
||||
###############################################################################
|
||||
#OffHost UICC route location for MultiSE
|
||||
#UICC1 = 02
|
||||
#UICC2 = 03
|
||||
OFFHOST_ROUTE_UICC={02:03}
|
||||
################################################################################
|
||||
# This will enable power state required for GSMA testing.
|
||||
# When this is enabled , then default AID route power state is added with this power state
|
||||
# If any aid with power state 0 is added, then this power state is used.
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen off unlock
|
||||
# bit pos 4 = Screen On lock
|
||||
# bit pos 5 = Screen Off lock
|
||||
#DEFUALT_GSMA_PWR_STATE=0x3B
|
||||
#################################################################################
|
||||
@ -191,6 +191,10 @@ PRODUCT_PACKAGES += \
|
||||
nfc_nci.nqx.default.hw \
|
||||
vendor.nxp.hardware.nfc@1.2-service
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(LOCAL_PATH)/configs/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf \
|
||||
$(LOCAL_PATH)/configs/nfc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf
|
||||
|
||||
# Overlay
|
||||
DEVICE_PACKAGE_OVERLAYS += \
|
||||
$(LOCAL_PATH)/overlay \
|
||||
|
||||
Loading…
Reference in New Issue
Block a user