From c59c8ee2f132bb294b97556c01233c0f070c6333 Mon Sep 17 00:00:00 2001
From: Arian <arian.kulmer@web.de>
Date: Mon, 27 Jun 2022 23:55:37 +0200
Subject: [PATCH] sm6150-common: wifi: Update from sweet V13.0.8.0.SKFMIXM

Change-Id: I0fb87ac8d9b8cfae99f1b1c1fce8ac13810af8fc
---
 configs/wifi/WCNSS_qcom_cfg.ini | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/configs/wifi/WCNSS_qcom_cfg.ini b/configs/wifi/WCNSS_qcom_cfg.ini
index a573a0c..cbe2ee7 100644
--- a/configs/wifi/WCNSS_qcom_cfg.ini
+++ b/configs/wifi/WCNSS_qcom_cfg.ini
@@ -274,6 +274,10 @@ gEnableMCCAdaptiveScheduler=1
 #Enable or Disable p2p device address administered
 isP2pDeviceAddrAdministrated=0
 
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
 # Remove Overlap channel restriction
 gEnableOverLapCh=0
 
@@ -340,6 +344,19 @@ gSapSccChanAvoidance=0
 # Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
 gIbssTxSpEndInactivityTime=10
 
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
 # Enable TDLS External Control. That is, user space application has to
 # first configure a peer MAC in wlan driver towards which TDLS is desired.
 # Device will establish TDLS only towards those configured peers whenever
@@ -444,8 +461,9 @@ ce_service_max_rx_ind_flush=1
 maxMSDUsPerRxInd=8
 
 # Enable NUD tracking feature
-# 1 - enable 0 - disable(default)
-gEnableNUDTracking=1
+# 0 - disable(default),1 - trigger disconnect, 2 - trigger roaming,
+# 3 - trigger roaming, but if roam fails, disconnection
+gEnableNUDTracking=3
 ################ Datapath feature set End ################
 
 ################ NAN feature set start ###################
@@ -544,9 +562,14 @@ g_sta_sap_scc_on_lte_coex_chan=1
 # enable/disable GCMP to fix throughput issue
 gcmp_enabled=1
 
+drop_bcn_on_chan_mismatch=0
+
 # Enable/Disable rtt sta mac randomization
 enable_rtt_mac_randomization=1
 
+# Create another interface during driver load
+#gEnableConcurrentSTA=wlan1
+
 # Enable/Disable DBS
 gDualMacFeatureDisable=0
 
@@ -573,12 +596,14 @@ gActiveUcBpfMode=1
 gActiveMcBcBpfMode=1
 
 # Allow STA+SAP SCC on DFS channel with master mode support disabled
-g_sta_sap_scc_on_dfs_chan=1
+g_sta_sap_scc_on_dfs_chan=2
 
 gStaPrefer80MHzOver160MHz=1
 
 gEnableSARV1toSARV2=1
 
+np_chan_weight=0x1
+
 # Reduce the expiry time for avoid list and black list in drv.
 avoid_list_expiry_time=3
 black_list_expiry_time=3