davinci: rootdir: Cleanup init.qcom.sh

* Only keep modem config copy

Change-Id: I5fe0ee43ea5c27b8903a8236a1a528a7f5ab784d
This commit is contained in:
Arian 2020-04-14 11:53:40 +02:00
parent aa57d3d050
commit f1260fc759
No known key found for this signature in database
GPG Key ID: 48029380598CE3B9

View File

@ -27,398 +27,6 @@
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
target=`getprop ro.board.platform`
low_ram=`getprop ro.config.low_ram`
if [ -f /sys/devices/soc0/soc_id ]; then
platformid=`cat /sys/devices/soc0/soc_id`
else
platformid=`cat /sys/devices/system/soc/soc0/id`
fi
start_battery_monitor()
{
if ls /sys/bus/spmi/devices/qpnp-bms-*/fcc_data ; then
chown -h root.system /sys/module/pm8921_bms/parameters/*
chown -h root.system /sys/module/qpnp_bms/parameters/*
chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_data
chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_temp
chown -h root.system /sys/bus/spmi/devices/qpnp-bms-*/fcc_chgcyl
chmod 0660 /sys/module/qpnp_bms/parameters/*
chmod 0660 /sys/module/pm8921_bms/parameters/*
mkdir -p /data/bms
chown -h root.system /data/bms
chmod 0770 /data/bms
start battery_monitor
fi
}
start_charger_monitor()
{
if ls /sys/module/qpnp_charger/parameters/charger_monitor; then
chown -h root.system /sys/module/qpnp_charger/parameters/*
chown -h root.system /sys/class/power_supply/battery/input_current_max
chown -h root.system /sys/class/power_supply/battery/input_current_trim
chown -h root.system /sys/class/power_supply/battery/input_current_settled
chown -h root.system /sys/class/power_supply/battery/voltage_min
chmod 0664 /sys/class/power_supply/battery/input_current_max
chmod 0664 /sys/class/power_supply/battery/input_current_trim
chmod 0664 /sys/class/power_supply/battery/input_current_settled
chmod 0664 /sys/class/power_supply/battery/voltage_min
chmod 0664 /sys/module/qpnp_charger/parameters/charger_monitor
start charger_monitor
fi
}
start_vm_bms()
{
if [ -e /dev/vm_bms ]; then
chown -h root.system /sys/class/power_supply/bms/current_now
chown -h root.system /sys/class/power_supply/bms/voltage_ocv
chmod 0664 /sys/class/power_supply/bms/current_now
chmod 0664 /sys/class/power_supply/bms/voltage_ocv
start vm_bms
fi
}
start_msm_irqbalance_8939()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
case "$platformid" in
"239" | "293" | "294" | "295" | "304" | "313" | "353" | "354")
start vendor.msm_irqbalance;;
"349" | "350" )
start vendor.msm_irqbal_lb;;
esac
fi
}
start_msm_irqbalance_msmnile()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
start vendor.msm_irqbalance
fi
}
start_msm_irqbalance_kona()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
start vendor.msm_irqbalance
fi
}
start_msm_irqbalance_lito()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
start vendor.msm_irqbalance
fi
}
start_msm_irqbalance_atoll()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
start vendor.msm_irqbalance
fi
}
start_msm_irqbalance()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
case "$platformid" in
"317" | "321" | "324" | "325" | "326" | "336" | "345" | "346" | "360" | "393")
start vendor.msm_irqbalance;;
"318" | "327" | "385")
start vendor.msm_irqbl_sdm630;;
esac
fi
}
baseband=`getprop ro.baseband`
echo 1 > /proc/sys/net/ipv6/conf/default/accept_ra_defrtr
case "$baseband" in
"svlte2a")
start bridgemgrd
;;
esac
case "$target" in
"msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
if [ -f /sys/devices/soc0/hw_platform ]; then
value=`cat /sys/devices/soc0/hw_platform`
else
value=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
case "$value" in
"Fluid")
start profiler_daemon;;
esac
;;
"msm8660" )
if [ -f /sys/devices/soc0/hw_platform ]; then
platformvalue=`cat /sys/devices/soc0/hw_platform`
else
platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
case "$platformvalue" in
"Fluid")
start profiler_daemon;;
esac
;;
"msm8960")
case "$baseband" in
"msm")
start_battery_monitor;;
esac
if [ -f /sys/devices/soc0/hw_platform ]; then
platformvalue=`cat /sys/devices/soc0/hw_platform`
else
platformvalue=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
case "$platformvalue" in
"Fluid")
start profiler_daemon;;
"Liquid")
start profiler_daemon;;
esac
;;
"msm8974")
platformvalue=`cat /sys/devices/soc0/hw_platform`
case "$platformvalue" in
"Fluid")
start profiler_daemon;;
"Liquid")
start profiler_daemon;;
esac
case "$baseband" in
"msm")
start_battery_monitor
;;
esac
start_charger_monitor
;;
"sdm660")
if [ -f /sys/devices/soc0/soc_id ]; then
soc_id=`cat /sys/devices/soc0/soc_id`
else
soc_id=`cat /sys/devices/system/soc/soc0/id`
fi
if [ -f /sys/devices/soc0/hw_platform ]; then
hw_platform=`cat /sys/devices/soc0/hw_platform`
else
hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
case "$soc_id" in
"317" | "324" | "325" | "326" | "318" | "327" )
case "$hw_platform" in
"Surf")
setprop qemu.hw.mainkeys 0
;;
"MTP")
setprop qemu.hw.mainkeys 0
;;
"RCM")
setprop qemu.hw.mainkeys 0
;;
"QRD")
setprop qemu.hw.mainkeys 0
;;
esac
;;
esac
start_msm_irqbalance
;;
"apq8084")
platformvalue=`cat /sys/devices/soc0/hw_platform`
case "$platformvalue" in
"Fluid")
start profiler_daemon;;
"Liquid")
start profiler_daemon;;
esac
;;
"msm8226")
start_charger_monitor
;;
"msm8610")
start_charger_monitor
;;
"msm8916")
start_vm_bms
start_msm_irqbalance_8939
if [ -f /sys/devices/soc0/soc_id ]; then
soc_id=`cat /sys/devices/soc0/soc_id`
else
soc_id=`cat /sys/devices/system/soc/soc0/id`
fi
if [ -f /sys/devices/soc0/platform_subtype_id ]; then
platform_subtype_id=`cat /sys/devices/soc0/platform_subtype_id`
fi
if [ -f /sys/devices/soc0/hw_platform ]; then
hw_platform=`cat /sys/devices/soc0/hw_platform`
fi
case "$soc_id" in
"239")
case "$hw_platform" in
"Surf")
case "$platform_subtype_id" in
"1")
setprop qemu.hw.mainkeys 0
;;
esac
;;
"MTP")
case "$platform_subtype_id" in
"3")
setprop qemu.hw.mainkeys 0
;;
esac
;;
esac
;;
esac
;;
"msm8994" | "msm8992" | "msm8998" | "apq8098_latv" | "sdm845" | "sdm710" | "qcs605" | "sm6150")
start_msm_irqbalance
;;
"msm8996")
if [ -f /sys/devices/soc0/hw_platform ]; then
hw_platform=`cat /sys/devices/soc0/hw_platform`
fi
case "$hw_platform" in
"MTP" | "CDP")
#Loop through the sysfs nodes and determine the correct sysfs to change the permission and ownership.
for count in 0 1 2 3 4 5 6 7 8 9 10
do
dir="/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input"$count
if [ -d "$dir" ]; then
chmod 0660 $dir/secure_touch_enable
chmod 0440 $dir/secure_touch
chown system.drmrpc $dir/secure_touch_enable
chown system.drmrpc $dir/secure_touch
break
fi
done
;;
esac
;;
"msm8909")
start_vm_bms
;;
"msmnile")
start_msm_irqbalance_msmnile
;;
"kona")
start_msm_irqbalance_kona
;;
"lito")
start_msm_irqbalance_lito
;;
"atoll")
start_msm_irqbalance_atoll
;;
"msm8937")
start_msm_irqbalance_8939
if [ -f /sys/devices/soc0/soc_id ]; then
soc_id=`cat /sys/devices/soc0/soc_id`
else
soc_id=`cat /sys/devices/system/soc/soc0/id`
fi
if [ -f /sys/devices/soc0/hw_platform ]; then
hw_platform=`cat /sys/devices/soc0/hw_platform`
else
hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
if [ "$low_ram" != "true" ]; then
case "$soc_id" in
"294" | "295" | "303" | "307" | "308" | "309" | "313" | "320" | "353" | "354" | "363" | "364")
case "$hw_platform" in
"Surf")
setprop qemu.hw.mainkeys 0
;;
"MTP")
setprop qemu.hw.mainkeys 0
;;
"RCM")
setprop qemu.hw.mainkeys 0
;;
"QRD")
setprop qemu.hw.mainkeys 0
;;
esac
;;
esac
fi
;;
"msm8953")
start_msm_irqbalance_8939
if [ -f /sys/devices/soc0/soc_id ]; then
soc_id=`cat /sys/devices/soc0/soc_id`
else
soc_id=`cat /sys/devices/system/soc/soc0/id`
fi
if [ -f /sys/devices/soc0/hw_platform ]; then
hw_platform=`cat /sys/devices/soc0/hw_platform`
else
hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
case "$soc_id" in
"293" | "304" | "338" | "351" | "349" | "350" )
case "$hw_platform" in
"Surf")
setprop qemu.hw.mainkeys 0
;;
"MTP")
setprop qemu.hw.mainkeys 0
;;
"RCM")
setprop qemu.hw.mainkeys 0
;;
"QRD")
setprop qemu.hw.mainkeys 0
;;
esac
;;
esac
;;
"sdm710")
if [ -f /sys/devices/soc0/soc_id ]; then
soc_id=`cat /sys/devices/soc0/soc_id`
else
soc_id=`cat /sys/devices/system/soc/soc0/id`
fi
if [ -f /sys/devices/soc0/hw_platform ]; then
hw_platform=`cat /sys/devices/soc0/hw_platform`
else
hw_platform=`cat /sys/devices/system/soc/soc0/hw_platform`
fi
case "$soc_id" in
"336" | "337" | "347" | "360" | "393" )
case "$hw_platform" in
"Surf")
setprop qemu.hw.mainkeys 0
;;
"MTP")
setprop qemu.hw.mainkeys 0
;;
"RCM")
setprop qemu.hw.mainkeys 0
;;
"QRD")
setprop qemu.hw.mainkeys 0
;;
esac
;;
esac
;;
esac
#
# Make modem config folder and copy firmware config to that folder for RIL
#
@ -442,17 +50,3 @@ if [ ! -f /vendor/firmware_mnt/verinfo/ver_info.txt -o "$prev_version_info" != "
fi
chmod g-w /data/vendor/modem_config
setprop ro.vendor.ril.mbn_copy_completed 1
#check build variant for printk logging
#current default minimum boot-time-default
buildvariant=`getprop ro.build.type`
case "$buildvariant" in
"userdebug" | "eng")
#set default loglevel to KERN_INFO
echo "6 6 1 7" > /proc/sys/kernel/printk
;;
*)
#set default loglevel to KERN_WARNING
echo "4 4 1 4" > /proc/sys/kernel/printk
;;
esac