davinci: Import GPS configs from MIUI V12.0.1.0.QFJMIXM

Change-Id: Id3ec33eeb511081ebf2eb07324b167b3e58c11a2
2020-08-02 16:16:52 +02:00 · 2020-08-02 16:16:52 +02:00 · f88933946c
commit f88933946c
parent bf60c73d8e
9 changed files with 1081 additions and 9 deletions
--- a/configs/gps/apdr.conf
+++ b/configs/gps/apdr.conf
@ -0,0 +1,205 @@
+# AP DR SENSOR Configuration file
+#
+# SENSOR_SERVICE options are one of below
+#   accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
+#   gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
+#
+# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
+#
+# SENSOR_RATE = 1~100 (Hz)
+#
+# SENSOR_SAMPLES = 1~N
+#
+# SENSOR_STATISTIC_ENABLED
+#  bit 0: Diag Print Enabled
+#  bit 1: Adb  Print Enabled
+# SENSOR_STATISTIC_PRINT_COUNT
+#  Skip Number of Print
+#
+# QDR_DYNAMIC_LOADING = 1~3
+# Configure QDR library to be loaded
+#   1: QDR3
+#   2: QDR2-GYRO
+#   3: QDR2-DWT
+#
+#
+
+
+######################################
+#                                    #
+#   Default Configuration            #
+#  (GNSS only,QDR Disabled)          #
+#                                    #
+# For QDR enablement, comment        #
+# this section and enabled           #
+# either QDR3 OR                     #
+# QDR2-DWT OR QDR2-Gyro related      #
+# configuration section in below.    #
+#                                    #
+######################################
+
+SENSOR_SERVICE = accel
+SENSOR_PROVIDER = native
+SENSOR_RATE = 100
+SENSOR_SAMPLES = 1
+
+SENSOR_SERVICE = gyro
+SENSOR_PROVIDER = native
+SENSOR_RATE = 100
+SENSOR_SAMPLES = 1
+
+SENSOR_SERVICE = vehicle_gear
+SENSOR_PROVIDER = native
+SENSOR_RATE = 100
+SENSOR_SAMPLES = 1
+
+
+######################################
+#                                    #
+#   QDR3 Configuration               #
+#                                    #
+# For QDR3,                          #
+# comment default configuration above#
+# and                                #
+# uncomment below configuration      #
+# settings.                          #
+#                                    #
+######################################
+#
+#SENSOR_SERVICE = accel
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 10
+#SENSOR_SAMPLES = 10
+#
+#SENSOR_SERVICE = vehicle_speed
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+#SENSOR_SERVICE = gyro
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 10
+#SENSOR_SAMPLES = 10
+#
+#SENSOR_SERVICE = vehicle_gear
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+#
+##Enable/disable sensor data flashback feature
+#QDR_FLASHBACK_ENABLED = 0
+##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
+#QDR_DYNAMIC_LOADING = 1
+##Enable/disable sensor data batching feature
+#QDR_BATCHING_ENABLED = 2
+##Reporting offset before PPS boundary
+#QDR_REPORTING_OFFSET = 0
+##Sensor dispatch threshold declaration
+#QDR_SENSDISPATCH_MS = 30
+#
+
+######################################
+#                                    #
+#   QDR2-DWT Configuration           #
+#                                    #
+# For QDR2-DWT,                      #
+# comment default configuration above#
+# and                                #
+# uncomment below configuration      #
+# settings.                          #
+#                                    #
+######################################
+#
+#SENSOR_SERVICE = vehicle_speed
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#SENSOR_STATISTIC_ENABLED = 3
+#SENSOR_STATISTIC_PRINT_COUNT = 50
+#
+#SENSOR_SERVICE = vehicle_dws
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#SENSOR_STATISTIC_ENABLED = 3
+#SENSOR_STATISTIC_PRINT_COUNT = 50
+#
+#SENSOR_SERVICE = vehicle_gear
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#SENSOR_STATISTIC_ENABLED = 3
+#SENSOR_STATISTIC_PRINT_COUNT = 50
+#
+#GNSS_POS_STATISTIC_ENABLED = 3
+#GNSS_POS_STATISTIC_PRNTCNT = 10
+#GNSS_MSR_STATISTIC_ENABLED = 3
+#GNSS_MSR_STATISTIC_PRNTCNT = 10
+#
+##Enable/disable sensor data flashback feature
+#QDR_FLASHBACK_ENABLED = 0
+##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
+#QDR_DYNAMIC_LOADING = 3
+##Enable/disable sensor data batching feature
+#QDR_BATCHING_ENABLED = 0
+##Reporting offset before PPS boundary
+#QDR_REPORTING_OFFSET = 0
+##Sensor dispatch threshold declaration
+#QDR_SENSDISPATCH_MS = 30
+##QDR_ENABLE_QG shall be set as 1
+#QDR_ENABLE_QG = 1
+##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
+##To be used for differential wheel tick OR speed service.
+##This configuration is applicable when QDR_CAN_TYPE configured as
+##ODO_DWS(3) or ODO_DWT(2).
+##Value "0": Use Front two wheels
+##Value "1": Use Rear two wheels
+##Value "2": Use All four wheels
+#QG_DRIVE_WHEEL_FW_RW_AW = 2
+##Max Wheel tick value above which wheel tick rolls over
+##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
+#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
+##Configure Wheel constant for DWT based below equation
+##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
+##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
+#QG_DWT_WHEEL_CONSTANT = 0.044
+
+######################################
+#                                    #
+#   QDR2-GYRO Configuration          #
+#                                    #
+# For QDR2-GYRO,                     #
+# comment default configuration above#
+# and                                #
+# uncomment below configuration      #
+# settings.                          #
+#                                    #
+######################################
+#
+#SENSOR_SERVICE = vehicle_speed
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+#SENSOR_SERVICE = vehicle_gyro
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+#SENSOR_SERVICE = vehicle_gear
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+##Enable/disable sensor data flashback feature
+#QDR_FLASHBACK_ENABLED = 0
+##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
+#QDR_DYNAMIC_LOADING = 2
+##Enable/disable sensor data batching feature
+#QDR_BATCHING_ENABLED = 0
+##Reporting offset before PPS boundary
+#QDR_REPORTING_OFFSET = 0
+##Sensor dispatch threshold declaration
+#QDR_SENSDISPATCH_MS = 30
+#
--- a/configs/gps/flp.conf
+++ b/configs/gps/flp.conf
@ -0,0 +1,60 @@
+###################################
+#####       FLP settings      #####
+###################################
+
+###################################
+# FLP BATCH SIZE
+###################################
+# The number of batched locations
+# requested to modem. The desired number
+# defined below may not be satisfied, as
+# the modem can only return the number
+# of batched locations that can be allocated,
+# which is limited by memory. The default
+# batch size defined as 20 as below.
+BATCH_SIZE=20
+
+###################################
+# FLP OUTDOOR TRIP BATCH SIZE
+###################################
+# The number of batched locations
+# requested to modem for outdoor
+# trip batching. The desired number
+# defined below may not be satisfied, as
+# the modem can only return the number
+# of batched locations that can be allocated,
+# which is limited by memory. The default
+# trip batch size defined as 600 as below.
+OUTDOOR_TRIP_BATCH_SIZE=600
+
+###################################
+# FLP BATCHING SESSION TIMEOUT
+###################################
+# Duration with which batch session timeout
+# happens in milliseconds. If not specified
+# or set to zero, batching session timeout
+# defaults to 20 seconds by the modem.
+# BATCH_SESSION_TIMEOUT=20000
+
+###################################
+# FLP BATCHING ACCURACY
+###################################
+# Set to one of the defined values below
+# to define the accuracy of batching.
+# If not specified, accuracy defaults
+# to LOW.
+# FLP BATCHING ACCURACY values:
+# Low accuracy = 0
+# Medium accuracy = 1
+# High accuracy = 2
+ACCURACY=1
+
+####################################
+# By default if network fixes are not sensor assisted
+# these fixes must be dropped. This parameter adds an exception
+# for targets where there is no PDR and we still want to
+# report out network fixes
+# 0: MUST NOT ALLOW NETWORK FIXES
+# 1: ALLOW NETWORK FIXES
+####################################
+ALLOW_NETWORK_FIXES = 0
--- a/configs/gps/gps.conf
+++ b/configs/gps/gps.conf
@ -0,0 +1,295 @@
+#Version check for XTRA
+#DISABLE = 0
+#AUTO    = 1
+#XTRA2   = 2
+#XTRA3   = 3
+XTRA_VERSION_CHECK=0
+
+#unlimited XTRA download
+XTRA_TEST_ENABLED = 1
+XTRA_THROTTLE_ENABLED = 0
+
+# Error Estimate
+# _SET = 1
+# _CLEAR = 0
+ERR_ESTIMATE=0
+
+#NTP server
+NTP_SERVER=time.izatcloud.net
+NTP_SERVER_2=asia.pool.ntp.org
+NTP_SERVER_3=0.cn.pool.ntp.org
+
+#XTRA CA path
+XTRA_CA_PATH=/usr/lib/ssl/certs
+
+# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
+#               4 - Debug, 5 - Verbose
+# If DEBUG_LEVEL is commented, Android's logging levels will be used
+DEBUG_LEVEL = 3
+
+# Intermediate position report, 1=enable, 0=disable
+INTERMEDIATE_POS=0
+
+# supl version 1.0
+SUPL_VER=0x20000
+
+# Emergency SUPL, 1=enable, 0=disable
+#SUPL_ES=1
+
+#Choose PDN for Emergency SUPL
+#1 - Use emergency PDN
+#0 - Use regular SUPL PDN for Emergency SUPL
+#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
+
+#SUPL_MODE is a bit mask set in config.xml per carrier by default.
+#If it is uncommented here, this value will overwrite the value from
+#config.xml.
+#MSA=0X2
+#MSB=0X1
+SUPL_MODE=3
+
+# GPS Capabilities bit mask
+# SCHEDULING = 0x01
+# MSB = 0x02
+# MSA = 0x04
+# ON_DEMAND_TIME = 0x10
+# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
+CAPABILITIES=0x17
+
+# Accuracy threshold for intermediate positions
+# less accurate positions are ignored, 0 for passing all positions
+ACCURACY_THRES=70
+
+################################
+##### AGPS server settings #####
+################################
+
+# FOR SUPL SUPPORT, set the following
+# SUPL_HOST=supl.host.com or IP
+# SUPL_PORT=1234
+
+# FOR MO SUPL SUPPORT, set the following
+# MO_SUPL_HOST=supl.host.com or IP
+# MO_SUPL_PORT=1234
+
+# FOR C2K PDE SUPPORT, set the following
+# C2K_HOST=c2k.pde.com or IP
+# C2K_PORT=1234
+
+# Bitmask of slots that are available
+# for write/install to, where 1s indicate writable,
+# and the default value is 0 where no slots
+# are writable. For example, AGPS_CERT_WRITABLE_MASK
+# of b1000001010 makes 3 slots available
+# and the remaining 7 slots unwritable.
+#AGPS_CERT_WRITABLE_MASK=0
+
+####################################
+#  LTE Positioning Profile Settings
+####################################
+# 0: Enable RRLP on LTE(Default)
+# 1: Enable LPP_User_Plane on LTE
+# 2: Enable LPP_Control_Plane
+# 3: Enable both LPP_User_Plane and LPP_Control_Plane
+LPP_PROFILE = 0
+
+####################################
+#Datum Type
+####################################
+# 0: WGS-84
+# 1: PZ-90
+DATUM_TYPE = 0
+
+################################
+# EXTRA SETTINGS
+################################
+# NMEA provider (1=Modem Processor, 0=Application Processor)
+NMEA_PROVIDER=0
+# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
+SGLTE_TARGET=0
+
+##################################################
+# Select Positioning Protocol on A-GLONASS system
+##################################################
+# 0x1: RRC CPlane
+# 0x2: RRLP UPlane
+# 0x4: LLP Uplane
+A_GLONASS_POS_PROTOCOL_SELECT = 0
+
+##################################################
+# Select technology for LPPe Control Plane
+##################################################
+# 0x1: DBH for LPPe CP
+# 0x2: WLAN AP Measurements for LPPe CP
+# 0x4: SRN AP measurement for CP
+# 0x8: Sensor Barometer Measurement LPPe CP
+LPPE_CP_TECHNOLOGY = 0
+
+##################################################
+# Select technology for LPPe User Plane
+##################################################
+# 0x1: DBH for LPPe UP
+# 0x2: WLAN AP Measurements for LPPe UP
+# 0x4: SRN AP measurement for UP
+# 0x8: Sensor Barometer Measurement LPPe UP
+LPPE_UP_TECHNOLOGY = 0
+
+##################################################
+# AGPS_CONFIG_INJECT
+##################################################
+# enable/disable injection of AGPS configurations:
+#     SUPL_VER
+#     SUPL_HOST
+#     SUPL_PORT
+#     MO_SUPL_HOST
+#     MO_SUPL_PORT
+#     C2K_HOST
+#     C2K_PORT
+#     LPP_PROFILE
+#     A_GLONASS_POS_PROTOCOL_SELECT
+# 0: disable
+# 1: enable
+AGPS_CONFIG_INJECT = 1
+
+##################################################
+# GNSS settings for automotive use cases
+# Configurations in following section are
+# specific to automotive use cases, others
+# please do not change, keep the default values
+##################################################
+
+# AP Coarse Timestamp Uncertainty
+##################################################
+# default : 10
+# AP time stamp uncertainty, until GNSS receiver
+# is able to acquire better timing information
+AP_TIMESTAMP_UNCERTAINTY = 10
+
+##################################################
+# QDR engine availability status
+##################################################
+# 0 : NO QDR (default)
+# 1 : QDR enabled
+# This settings enables QDR Configuration for
+# automotive use case, if enabled then
+# DR_AP_Service needs to be enabled in izat.conf
+#EXTERNAL_DR_ENABLED = 0
+
+#####################################
+# DR_SYNC Pulse Availability
+#####################################
+# 0 : DR_SYNC pulse not available (default)
+# 1 : DR_SYNC pulse available
+# This configuration enables the driver to make use
+# of PPS events generated by DR_SYNC pulse
+# Standard Linux PPS driver needs to be enabled
+DR_SYNC_ENABLED = 0
+
+#####################################
+# PPS Device name
+#####################################
+PPS_DEVICENAME = /dev/pps0
+
+#####################################
+# Ignore PPS at Startup and after long outage
+#####################################
+IGNORE_PPS_PULSE_COUNT = 1
+
+#####################################
+# Long GNSS RF outage in seconds
+#####################################
+GNSS_OUTAGE_DURATION = 10
+
+#####################################
+# AP Clock Accuracy
+#####################################
+# Quality of APPS processor clock (in PPM).
+# Value specified is used for calculation of
+# APPS time stamp uncertainty
+AP_CLOCK_PPM = 100
+
+#####################################
+# MAX ms difference to detect missing pulse
+#####################################
+# Specifies time threshold in ms to validate any missing PPS pulses
+MISSING_PULSE_TIME_DELTA = 900
+
+#####################################
+# Propagation time uncertainty
+#####################################
+# This settings enables time uncertainty propagation
+# logic incase of missing PPS pulse
+PROPAGATION_TIME_UNCERTAINTY = 1
+
+#######################################
+#  APN / IP Type Configuration
+#  APN and IP Type to use for setting
+#  up WWAN call.
+#  Use below values for IP Type:
+#  v4 = 4
+#  v6 = 6
+#  v4v6 = 10
+#######################################
+# INTERNET_APN = abc.xyz
+# INTERNET_IP_TYPE = 4
+# SUPL_APN = abc.xyz
+# SUPL_IP_TYPE = 4
+
+#####################################
+# Modem type
+#####################################
+# This setting configures modem type
+# (external=0 or internal=1)
+# comment out the next line to vote
+# for the first modem in the list
+MODEM_TYPE = 1
+
+##################################################
+# CONSTRAINED TIME UNCERTAINTY MODE
+##################################################
+# 0 : disabled (default)
+# 1 : enabled
+# This setting enables GPS engine to keep its time
+# uncertainty below the specified constraint
+#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
+
+# If constrained time uncertainty mode is enabled,
+# this setting specifies the time uncertainty
+# threshold that gps engine need to maintain.
+# In unit of milli-seconds.
+# Default is 0.0 meaning that modem default value
+# of time uncertainty threshold will be used.
+#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
+
+# If constrained time uncertainty mode is enabled,
+# this setting specifies the power budget that
+# gps engine is allowed to spend to maintain the time
+# uncertainty.
+# Default is 0 meaning that GPS engine is not constained
+# by power budget and can spend as much power as needed.
+# In unit of 0.1 milli watt second.
+#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
+
+##################################################
+# POSITION ASSISTED CLOCK ESTIMATOR
+##################################################
+# 0 : disabled (default)
+# 1 : enabled
+# This setting enables GPS engine to estimate clock
+# bias and drift when the signal from at least 1
+# SV is available and the UE’s position is known by
+# other position engines.
+#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
+
+#####################################
+# proxyAppPackageName
+#####################################
+# This is a string that is sent to the framework
+# in nfwNotifyCb callback
+PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation
+
+#####################################
+# CP_MTLR_ES
+#####################################
+# CP MTLR ES, 1=enable, 0=disable
+CP_MTLR_ES=0
--- a/configs/gps/izat.conf
+++ b/configs/gps/izat.conf
@ -0,0 +1,246 @@
+#########################################
+# Log verbosity control for izat modules
+#########################################
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
+IZAT_DEBUG_LEVEL = 2
+
+##################################################
+# Select WIFI Wait Timeout value in seconds for SUPL
+##################################################
+WIFI_WAIT_TIMEOUT_SELECT = 0
+
+##################################################
+# Time interval of injecting SRN scan data to modem
+# time in seconds.
+# Note: recommended value is between 1-5 sec
+##################################################
+LPPE_SRN_DATA_SCAN_INJECT_TIME=2
+
+################################
+# NLP Settings
+################################
+# NLP_MODE  1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
+# For Automotive products, please use NLP_MODE = 4 only.
+# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
+# to determine how much Tolerance for first position
+# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
+# to determine how much Tolerance for positions after first
+# NLP_THRESHOLD: Sets how many failures needed before
+# switching preferred NLP in Combo mode
+# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
+# must be, in multiples, between two NLP location reports to
+# be considered much worse accuracy. Used in switching logic
+# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
+# whether or not to still send network location requests to
+# QNP when the EULA is not consented to by the user. QNP can
+# still return ZPP locations or injected locations even
+# without EULA consent, but the uncertainty can be high.
+# QNP preferred mode prefers QNP when there is EULA consent,
+# otherwise OSNLP is used.
+NLP_MODE = 1
+NLP_MODE_EMERGENCY = 2
+NLP_TOLERANCE_TIME_FIRST = 5000
+NLP_TOLERANCE_TIME_AFTER = 20000
+NLP_THRESHOLD = 3
+NLP_ACCURACY_MULTIPLE = 2
+NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
+
+#########################################
+# NLP PACKAGE SETTINGS
+#########################################
+# OSNLP_PACKAGE: name of default NLP package
+OSNLP_PACKAGE = com.google.android.gms
+# REGION_OSNLP_PACKAGE:
+# This value will be used as alternative
+# for particular region where default NLP is not functional.
+#REGION_OSNLP_PACKAGE =
+
+###################################
+# GEOFENCE SERVICES
+###################################
+# If set to one of the defined values below, it will override
+# the responsiveness for geofence services, which implements
+# the Proximity Alert API. If not set to a value defined below,
+# which is default, it will not override the responsivness.
+# The geofence HAL API is unaffected by this value.
+# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
+
+#####################################
+#GTP Opt-In app
+#####################################
+
+#GTP privacy policy version url
+#https support is required
+GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
+
+#GTP privacy policy version download retry interval
+#unit is second. default is 86400
+GTP_PRIVACY_RETRY_INTERVAL = 86400
+
+#####################################
+# IZAT PREMIUM FEATURE SETTINGS
+#####################################
+#Possible states of a feature:
+#DISABLED
+#BASIC
+#PREMIUM
+
+#GTP_MODE valid modes:
+# DISABLED
+# LEGACY_WWAN
+# SDK (WWAN not available for Modems before LocTech 10.0)
+GTP_MODE=DISABLED
+
+#GTP_WAA valid modes:
+# DISABLED
+# BASIC
+GTP_WAA=DISABLED
+
+#SAP valid modes:
+# DISABLED
+# BASIC
+# PREMIUM
+SAP=PREMIUM
+
+#FREE_WIFI_SCAN_INJECT valid modes:
+#DISABLED
+#BASIC
+FREE_WIFI_SCAN_INJECT=BASIC
+
+#SUPL_WIFI valid modes:
+#DISABLED
+#BASIC
+SUPL_WIFI=BASIC
+
+#WIFI_SUPPLICANT_INFO valid modes:
+#DISABLED
+#BASIC
+WIFI_SUPPLICANT_INFO=BASIC
+
+#####################################
+# Location process launcher settings
+#####################################
+
+# DO NOT MODIFY
+# Modifying below attributes without
+# caution can have serious implications.
+
+#Values for PROCESS_STATE:
+# ENABLED
+# DISABLED
+
+#PROCESS_NAME
+# Name of the executable file.
+
+#FEATURE MASKS:
+# GTP-WIFI    0X03
+# GTP-MP-CELL 0xc00
+# GTP-WAA     0x100
+# SAP         0Xc0
+# ODCPI      0x1000
+# FREE_WIFI_SCAN_INJECT   0x2000
+# SUPL_WIFI   0x4000
+# WIFI_SUPPLICANT_INFO   0x8000
+
+#Values for PLATFORMS can be:
+#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
+#2. 'all' or 'all exclude' -> for All platforms
+#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
+
+#Values for BASEBAND can be:
+#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
+#2. 'all' or 'all exclude' -> for all basebands
+#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
+PROCESS_NAME=lowi-server
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps wifi inet oem_2901
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0xf303
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=0
+
+PROCESS_NAME=xtwifi-inet-agent
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xc03
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+PROCESS_NAME=xtwifi-client
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=wifi inet gps system oem_2904
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xd03
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+PROCESS_NAME=slim_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+PROCESS_NAME=xtra-daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps system
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=0
+
+########################################
+# Engine Service which host DRE module #
+# To enable DRE engine service, change #
+# PROCESS_STATE=ENABLED                #
+########################################
+PROCESS_NAME=engine-service
+PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps diag inet qwes oem_2901 system
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
+
+########################################
+# Engine Service which host PPE module #
+# To enable PPE engine service, change #
+# PROCESS_STATE=ENABLED                #
+# and update process arugements        #
+# with PPE library name                #
+#PROCESS_ARGUMENT=PPE libepsimulator.so#
+########################################
+PROCESS_NAME=engine-service
+PROCESS_ARGUMENT=PPE libepsimulator.so
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps diag inet oem_2901
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+HARDWARE_TYPE=all
+VENDOR_ENHANCED_PROCESS=1
--- a/configs/gps/lowi.conf
+++ b/configs/gps/lowi.conf
@ -0,0 +1,27 @@
+#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
+#
+# LOWI Config file
+#
+# GENERAL DESCRIPTION
+#  This file contains the config params for LOWI
+#
+# Copyright (c) 2019 Qualcomm Technologies, Inc.
+#  All Rights Reserved.
+#  Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# 2012-2013 Qualcomm Atheros, Inc.
+#  All Rights Reserved.
+#  Qualcomm Atheros Confidential and Proprietary.
+#
+# Export of this technology or software is regulated by the U.S. Government.
+# Diversion contrary to U.S. law prohibited.
+#=============================================================================*/
+
+# X86 ONLY - UBUNTU:
+# Copy this file in the same directory where the executable is
+
+# Log level
+# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
+LOWI_LOG_LEVEL = 3
+LOWI_USE_LOWI_LP = 0
+
--- a/configs/gps/sap.conf
+++ b/configs/gps/sap.conf
@ -0,0 +1,161 @@
+################################
+# Sensor Settings
+################################
+#The following parameters are optional.
+#Internal defaults support MEMS sensors
+#native to most handset devices.
+#Device specific sensor characterization
+#for improved performance is possible as
+#described in SAP application notes.
+#GYRO_BIAS_RANDOM_WALK=
+#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
+#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
+#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
+#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
+
+# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
+# used in loc_eng_reinit
+SENSOR_ACCEL_BATCHES_PER_SEC=2
+SENSOR_ACCEL_SAMPLES_PER_BATCH=5
+SENSOR_GYRO_BATCHES_PER_SEC=2
+SENSOR_GYRO_SAMPLES_PER_BATCH=5
+# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
+SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
+SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
+SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
+SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
+
+# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
+# used in loc_eng_reinit
+SENSOR_CONTROL_MODE=2
+
+# Bit mask used to define which sensor algorithms are used.
+# Setting each bit has the following definition:
+#  0x1 - DISABLE_INS_POSITIONING_FILTER
+#  0x0 - ENABLE_INS_POSITIONING_FILTER
+SENSOR_ALGORITHM_CONFIG_MASK=0x0
+
+#Vehicle Network Provider configuration
+
+#Service configuration strings
+#The number before colon in VN_X items defines version of the format of the rest of the string
+#VN_ACCEL_CFG=0:5
+#VN_GYRO_CFG=0:5.5
+#VN_ODOMETRY_CFG=0:2,4.5
+
+################################################
+#  QDR3 configurations                         #
+################################################
+VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
+VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
+
+################################################
+#  QDR2-Gyro configurations                    #
+################################################
+#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
+#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
+#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
+
+################################################
+#  QDR2-DWT configurations                     #
+################################################
+#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
+#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
+#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
+#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
+
+#####################################################################################
+#                    VNW service batching configuration strings                     #
+# VNW provider will initialize default type as Time based batching                  #
+# Each service batch value is configured to be 100                                  #
+# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE       #
+# is set to time based batching                                                     #
+# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE     #
+# is set to count based batching                                                    #
+# Uncomment and update batch time /sample count as per selected batching type       #
+#####################################################################################
+# Batching type
+# 1 - Time based  (default)
+# 2 - Count based
+#VN_CFG_BATCH_TYPE=1
+
+#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
+#VN_ACCEL_CFG_BATCH_VALUE=100
+
+#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
+#VN_GYRO_CFG_BATCH_VALUE=100
+
+#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
+#VN_ODOMETRY_CFG_BATCH_VALUE=100
+
+#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
+#VN_SPEED_CFG_BATCH_VALUE=100
+
+#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
+#VN_GEAR_CFG_BATCH_VALUE=100
+
+#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
+#VN_DWS_CFG_BATCH_VALUE=100
+####################################################################################
+
+#Procesors clock ratio: AP and CAN bus microcontroller
+################################################
+#  QDR3 configurations                         #
+################################################
+VN_PROC_CLOCK_RATIO=1.0
+
+################################################
+#  QDR2-DWT OR QDR2-Gyro configurations        #
+################################################
+#VN_PROC_CLOCK_RATIO = 1.0
+
+# Time source used by Sensor HAL
+# Setting this value controls accuracy of location sensor services.
+#  0 - Unknown
+#  1 - CLOCK_BOOTTIME
+#  2 - CLOCK_MONOTONIC
+#  3 - CLOCK_REALTIME
+#  4 - CLOCK_BOOTTIME using Alarm timer interface
+NDK_PROVIDER_TIME_SOURCE=1
+
+# Sensor Batching Configuration
+# 0 - Time based
+# 1 - Fixed count based
+# 2 - Variable count based
+COUNT_BASED_BATCHING=1
+SYNC_ONCE=0
+
+#Sensor HAL Provider Configuration HAL Library name including path
+################################################
+#                                              #
+# Configuration for BMI 160 Sensor             #
+#                                              #
+################################################
+SENSOR_TYPE=2
+SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
+
+################################################
+#                                              #
+# Configuration for ASM330 Sensor              #
+#                                              #
+################################################
+#SENSOR_TYPE=1
+#SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
+
+
+################################################
+#                                              #
+# Configuration for IAM20680 Sensor            #
+#                                              #
+################################################
+#SENSOR_TYPE=3
+#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
+
+
+################################################
+#                                              #
+# Configuration for SMI130 Sensor              #
+#                                              #
+################################################
+#SENSOR_TYPE=4
+#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1
--- a/configs/gps/xtwifi.conf
+++ b/configs/gps/xtwifi.conf
@ -0,0 +1,78 @@
+#GTP AP Project client core config file
+#
+#GENERAL DESCRIPTION
+#This is used by client core
+#
+#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
+#All Rights Reserved.
+#Qualcomm Atheros Confidential and Proprietary.
+#
+#Copyright (c) 2017 Qualcomm Technologies, Inc.
+#All Rights Reserved.
+#Confidential and Proprietary - Qualcomm Technologies, Inc.
+
+##############################################################################
+# non-IOT devices configuration items                                        #
+# For non-IOT devices, configure below configuration items                   #
+# according to the app note: 80-NK218-1 and remove the configuration items   #
+# in section of "IOT devices configuration items".                           #
+##############################################################################
+
+# ASN URI v2 to be used by some GTP AP modules that
+# need to run with ASN URI v2 protocol.
+XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2
+
+# ASN URI v3 to be used by GTP AP modules that
+# can support ASN URI v3 protocol.
+XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3
+
+# size, in bytes, of the cache on device
+SIZE_BYTE_TOTAL_CACHE = 5000000
+
+##############################################################################
+# IOT devices configuration items                                            #
+# For IOT devices, configure below configuration items                       #
+# according to the app note and remove the configuration items in section of #
+# "non-IOT devices configuration items".                                     #
+##############################################################################
+
+# ASN URI v3 to be used by GTP AP modules that
+# can support ASN URI v3 protocol.
+# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3
+
+# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
+#    for any GTP requests, instead notification is sent to Izat SDK.
+#    WiFi crowdsourcing module is disabled.
+# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
+#    for any GTP requests, instead notification is sent to Izat SDK.
+#    WiFi crowdsourcing module is active, also accessed via Izat SDK.
+# GTP_AP_MODE = 4
+
+# 1: MP cell features relies on GTP AP for either download or upload
+# 0: MP cell features does not rely on GTP AP
+# GTP_AP_NEEDED_BY_MP_CELL = 1
+
+##############################################################################
+# Configuration items applicable to all devices                              #
+##############################################################################
+
+# Log verbosity control for most of the GTP WiFi system, including native and
+# Java componenets
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100
+DEBUG_GLOBAL_LOG_LEVEL = 2
+
+# this is used at the server side to distinguish uploads from different maker/model
+# default "Qualcomm"
+OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
+
+# this is used at the server side to distinguish uploads from different maker/model
+# default "UNKNOWN"
+MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
+
+##############################################################################
+# Qualcomm Network Location Provider config                                  #
+##############################################################################
+
+# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
+# Default is 25000 meters.
+LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
--- a/device.mk
+++ b/device.mk
@ -167,6 +167,15 @@ PRODUCT_PACKAGES += \
    libgnsspps \
    libsensorndkbridge

+PRODUCT_COPY_FILES += \
+    $(LOCAL_PATH)/configs/gps/apdr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/apdr.conf \
+    $(LOCAL_PATH)/configs/gps/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \
+    $(LOCAL_PATH)/configs/gps/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \
+    $(LOCAL_PATH)/configs/gps/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \
+    $(LOCAL_PATH)/configs/gps/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \
+    $(LOCAL_PATH)/configs/gps/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \
+    $(LOCAL_PATH)/configs/gps/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf
+
 PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml

--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@ -547,15 +547,6 @@ vendor/lib64/vendor.qti.gnss@3.0-service.so
 vendor/lib64/vendor.qti.gnss@3.0.so
 vendor/lib64/vendor.qti.hardware.cacert@1.0.so

-# GPS configs
-vendor/etc/apdr.conf
-vendor/etc/flp.conf
-vendor/etc/gps.conf
-vendor/etc/izat.conf
-vendor/etc/lowi.conf
-vendor/etc/sap.conf
-vendor/etc/xtwifi.conf
-
 # IMS
 lib64/libdiag_system.so
 -product/app/uceShimService/uceShimService.apk