* Vendor partition is RO and prop cannot be changed there to
disable wide color gamut.
Change-Id: Ie5d90bc608f428c2be11d5159aaec98a6cdfbd03
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
Signed-off-by: donjohanliebert <donjohanliebert@gmail.com>
If the device only have 60 and 120 Hz in the config group, 60 Hz won't be
used when watching a 24 fps video and instead 120 Hz will be used because
it is perfectly divisible by 24.
This is a publicly documented AOSP behavior [1], but it simply does not
make any practical sense and trades off significant amount of power for a
very-hard-to-notice jitter-free experience.
Set debug.sf.frame_rate_multiple_threshold to 60 by default to limit this
behavior to 60 or lower fps.
[1] https://source.android.com/devices/graphics/multiple-refresh-rate
Change-Id: I66353abc46ad16e63b2c9188794469ad71f2192e
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
Signed-off-by: donjohanliebert <donjohanliebert@gmail.com>
Set debug.sf.latch_unsignaled=1 is used to allow surfaceflinger to
latch unsignal buffers that can give more time for buffer to render.
But if the buffer takes longer time to finish, it will block whole
display pipeline result to jank.
Bug: 157964883
Test: scrolling, launch
Change-Id: I56c3e05921de5fc9569bf3f93fde03022a64b6a4
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
Signed-off-by: donjohanliebert <donjohanliebert@gmail.com>
debug.stagefright.ccodec=4
is the default value in frameworks.
debug.stagefright.omx_default_rank=0
was used to rank OMX SW codecs lower than OMX HW codecs
but we have removed all OMX SW codecs now.
Change-Id: Idf55ec02c2c0f4d2fa73f949cffef0d820a54570
Caused incoming caller number not being parsed correctly by Phone app on
VoLTE and VoWiFi. No idea why Xiaomi enabled this ancient prop.
Signed-off-by: Andrzej Perczak <linux@andrzejperczak.com>
Change-Id: I4d3d19b80bedd7410e638c78909a8a910bc10be8
[basamaryan: This is needed to fix RIL on Android U]
Signed-off-by: basamaryan <basam.aryan@gmail.com>
Change-Id: Ie3fa610f71077b4ee2af1b4d57bd0c30b34f30fa
This is enabled by default on U, and it causes apps like
Chrome and YouTube to render the frame rate at 30FPS when
playing some videos.
Change-Id: I649bf03d550c2b9726c7957d15ed09e455d874ec
Signed-off-by: basamaryan <basam.aryan@gmail.com>
Need to explicitly set auto_latch_unsignaled property to
disabled state to keep latch-unsignaled as the default
behavior.
Change-Id: I3856caaf0a68e7e720819f25338d1eb9196f56b0
Use 64-bit dex2oat for better dexopt time.
Bug: 153380900
Test: boot and install an application
Change-Id: I3e7a6e6e9385ff6564d1a2e6dda004ebb061f095
(cherry picked from commit 126f03be80f57a8a0411842011152d9381589b78)
Merged-In: I3e7a6e6e9385ff6564d1a2e6dda004ebb061f095
AOSP defaults to v1 on devices shipped with Q or earlier,
explicitly enable v2 for these devices to use 16-byte padding
e575f4ed96/libfscrypt/fscrypt.cpp (L205)
Change-Id: I20e5f31007a2c01bc993c09e644205bf23ebd8ae
This fixes GSI image overriding the default value
Bug: 153852350
Test: Manually verified after flashing the GSI image
Change-Id: I78b415862c420c23121ec03d6953814cd628ea9a
* We aren't using QCOM's perfd but our blobs still check for this.
* To avoid unnecessary errors, let's just add it back.
Change-Id: Icc44b330f21a658cfa8ded691a6628d8f62c3649
Enable backpressure for client composition to avoid jank due to
HWC queue stuffing.
Test: 1. Open Camera
2. Swipe horizontally to go back to previous app.
Bug: 138083790
Change-Id: I3d26aa470c1660b23bd97133f39858f92638aca8
This is a surfaceflinger debugging feature that we don't care about, so
disable it to reduce overhead.
Change-Id: Iaf6417d101f1a79bfadf85f779a614ed0460c56d
Set debug.sf.latch_unsignaled=1 is used to allow surfaceflinger to
latch unsignal buffers that can give more time for buffer to render.
But if the buffer takes longer time to finish, it will block whole
display pipeline result to jank.
Bug: 157964883
Test: scrolling, launch
Change-Id: I56c3e05921de5fc9569bf3f93fde03022a64b6a4
Enable Adaptive color mode setting.
Bug: 143513730
Test: Boot test and measure the adaptive color value
Change-Id: I969ec6c3cb1d092a33c0e3a028ff38ad7115dfe2
* The following things are left in devices, because they're device specific
- voip compress properties
- HVDCP properties
- audio configs
- power profile
- rounded corner configuration
- partition configuration
- FOD
- camera motor
- NFC
- board-info
- fstab
- ipa and graphics firmware
- shipping and manifest target level
Co-authored-by: Adithya R <gh0strider.2k18.reborn@gmail.com>
Co-authored-by: Arian <arian.kulmer@web.de>
Change-Id: I8bef29041f8f239361b999fc8ab1a43cc2ebb86b
Timecheck timeout set to 20sec based on the property
vendor.audio.hal.boot.timeout.ms before system is ready.
It updates to default timeout of 5sec once the system
is ready.
Change-Id: I6d13eb8b8d06f279261cbcb81053f9a1389d073e